Polpriklopnik z nizko nakladalno ploščadjo

ES-GE 3-Achs-Satteltieflader - Radmulden

You can find our complete stock of immediately and short-term available vehicles on our website.

Excerpt from equipment. Complete equipment list upon request.

Chassis:
* Welded construction made from high-grade steel profiles in lightweight design with punched-through cross members
* Rear taper approx. 630 mm long and front frame lowered by approx. 100 mm
* At the rear of the chassis: excavator arm recess, approx. L 3,750 x W 640 x H 290 mm, located between the longitudinal beams with a steel tread-plate floor

Wheel recesses:
* In the lowered bed, approx. 1,700 mm ahead of the 1st axle, a pair of wheel recesses (support/surface under the ramps), approx. H 190 x L 1,550 x W 800 mm, incl. flat aluminium (climbing aid)
* Additional pair of wheel recesses between the 1st and 2nd axle, approx. H 190 x L 1,080 x W 800 mm, incl. flat aluminium (climbing aid)
* All wheel recesses with aluminium covers and steel tread-plate floors

Coupling system:
* 2-inch king pin

Landing legs:
Kjdpfx Abjvl N N Hj Uofa
* 2 x 12 t drop-type landing legs with aluminium compensating foot

Rear supports:
* Two adjustable drop supports

Axles:
* 3 x 10 t air-sprung axle units, brand SAF, with drum brakes approx. 300 x 200 mm
* Automatic slack adjusters
* ABS
* Centrally mounted wheel connection for twin tyres
* Total air suspension lift approx. 200 mm, raise approx. 140 mm, lower approx. 60 mm, control for raising/lowering via air spring valve with locking function

Lift axle:
* 1st axle liftable, controlled from chassis frame

Steering:
* 3rd axle self-steering with manual and automatic reverse lock

Brake system:
* Two-line compressed-air brake system per EC, with EBS and RSS
* Spring-loaded cylinders acting as parking brake on two axles
* Coupling heads fixed to the front cross member, reversal-proof, designed per EC, without connection lines to tractor unit

Tyres:
* 12x 235/75 R17.5 - brand of our choice, mounted on 6.75x17.5 rims with offset

Mudguards:
* Per EC, 1/4 PVC mudguard

Floor:
* Wooden floor recessed into outer frame. Over the wheels with steel tread-plate cover

Load securing upper deck:
* 4 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t
* Holes for lashing straps every approx. 500 mm in the outer frame

Load securing low deck:
* 8 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t
* 4 pairs of folding lashing rings recessed into the longitudinal beams of the chassis, lashing capacity approx. 8 t
* Holes for lashing straps every approx. 500 mm in the outer frame

Stake pockets upper deck:
* 4 pairs of stake pockets in the outer frame, evenly distributed

Stake pockets low deck:
* 6 pairs of stake pockets in the outer frame, evenly distributed

Insertable stakes:
* 20 stakes made of galvanized tubing approx. 80/50 mm, total length approx. 1,000 mm

Front wall:
* Bolted, fixed steel corner stakes filled with approx. 25 mm aluminium hollow profiles

Drop-in sideboard for upper deck:
* Each side at the front with a drop-in sideboard made from approx. 400 x 25 mm aluminium hollow profiles, length approx. 2,400 mm, removable, insertion pocket at the front on the front wall stake, rear in extra stake pockets approx. 80/50 mm
* Additional drop-in sideboard approx. 400 x 25 mm between the rear extra stake pockets for rear load securing

Ramps:
* 2 spring-assisted aluminium ramps, loadable up to approx. 32 t when supported
* Ramps secured with over-center latch

Lighting:
* Per

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.