Električni – 4 kolesa

Mora EP100RAS

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.040 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.020 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo v skladu z vašimi zahtevami. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno po željah strank. Podvozje Jeklena varjena konstrukcija z ozkimi razmiki prečnih nosilcev in v ojačani izvedbi, profil zunanjega okvirja nizkopodno prikolico, za prevoz gradbenih strojev do 32.000 kg in največje zunanje širine strojev 2.550 mm, sedlasta plošča z zamenljivim drugim kraljevskim zatičem. Zadnji naklon približno 1.200 mm in 7°. Rampna os zgoraj zaprta z jeklom/ribano pločevino. V globokem ležišču so na spodnji strani zunanji okvir O profilne letve za pripenjanje ponjave in distančnikov za pritrdilne kline, ne na območju koles. Pri dvižni mizi dodatni lahek zunanji okvir z O profilom. 24 t dvostopenjsko podporno dvigalo z enostranskim upravljanjem, s polkrožnim spodnjim delom in ravno priključno ploščo, s kompenzacijo potiska, prosti zadnji radij kovanja cca 1.950 mm. Zložljiva zadnja podpora Blodpfx Aoi Riw Aomtoi 2 zagozdi za kolesa + nosilec Bočna zaščita proti naletu iz aluminija Četrtinske blatnike pred in za vsako osjo z zaščito pred škropljenjem za vsako osjo Spodnja zaščita proti naletu iz jekla Zadnja zaščitna zavesa čez celotno širino 4 nerjavni zaboji za orodje, širina=800/višina=350/globina=350 mm, s poliranimi vrati, zaklepni, 2x levo in 2x desno pred 1. osjo Dvižna miza za gosji vrat, dolžina cca. 3.000 mm, hidravlično dvižna za prehod čez gosji vrat, z mehansko blokado v dvignjenem stanju (cilinder poševno za dobro oddaljenost od tal, Fliegl standard). Upravljanje na desni strani + dodatno upravljanje z radijskim daljincem. Dvižna miza dvižna tudi z zaprto ponjavo! Pripenjanje ponjave na območju dvižne mize na dodaten lahek zunanji okvir z O profilom, dvižna miza dvižna z zaprto ponjavo! Pritrdilne klinaste zanke uporabne tudi v spuščeni poziciji! Pritrdilne ušesce Gosji vrat: 4 para 5-tnih pritrdilnih ušes vgrajenih v zunanji okvir 2 para pritrdilnih klinastih zank zgoraj in ob straneh v zunanjem okvirju 8 parov pritrdilnih klinastih zank zgoraj in ob straneh v zunanjem okviru po 10 t 9 parov 5t vgrajenih v zunanji okvir Preme in vzmetenje SAF osovine z bobnastimi zavorami zadnja os krmiljena, z avtomatsko blokado za vzvratno vožnjo preko vzvratne luči in dodatno ročno blokado na vozilu Zračno vzmetenje z ventilom za dvig/spust in funkcijo auto-reset Funkcija H&S s hitro izpraznitvijo 1. os avtomatsko dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju (deluje do prekoračitve obremenitve osi za 30 % in do hitrosti največ 25 km/h) Dviganje osi pod priporočeno voznimi višino, ni garancije za poškodbe pnevmatik Kolesa in pnevmatike 235/75R17,5 od vodilnih proizvajalcev Jekleni platišča v dvojni postavitvi, tovarniško srebrna Zavorni sistem 2-žilni tlačni zračni zavorni sistem Vzmetno vzdrževana parkirna zavora 2 neizmenljivi priključni glavi spredaj EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Opozorilo: priklopna prikolica se sme vleči le z vozili, ki zagotavljajo učinkovitost ABS! Prepoznavanje osne obremenitve na tovornjaku preko EBS, brez tovornjakove vgradnje. Elektrika 24 voltov, večkomorni žarometi, stranska rumena LED osvetlitev 2 bela LED pozicijska svetila spredaj 2 bela/rdeča LED robna svetila zadaj 1 rotacijska svetilka z nosilcem, upravljanje preko pozicijske svetlobe (svetilka snemljiva) 2 para opozorilnih tabel, podvojene, LED osvetljene in izvlečne do 3.000 mm 2x 7-polni in 1x 15-polni neizmenljivi

Stanje: novo, največja dovoljena obremenitev: 36.461 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.480 mm, skupna višina: 860 mm, Leto izdelave: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings at the front central beam (LC 10,000 daN). C40/4 grating floor (point load 2.3 t on an area of 20 x 20 cm), over the axles checker plate covering. Two-part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections, hydraulic lifting system. Max load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length of 16,500 mm when in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in line with ECE R 141. Data transmission to the towing vehicle is via the standardised EBS interface according to ISO 11992. The towing vehicle must be able to receive and display this data for correct indication. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lift and lower valve. Axle tool kit. Blodpfxew Dl Hwo Amtoi Brake System: WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to tractor unit. Electrical System: Electrical system according to EU regulations, LED lighting 24 V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15 pin. Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: Steel construction made of high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Curtainsider Structure: Curtainsider body, ??? 3,960 mm ??? - Galvanised front wall with a tensioning mechanism for sliding curtains. - "EDSCHA" roof, forward sliding on ALU roof beam profiles (bolted to front and rear wall). - 3 pairs of sliding stanchions in the loading platform. - The body is hydraulically extendable at the rear by approx. 750 mm left and right. - Sliding roof with upward folding portal beam. - Sliding curtain with 700 mm length reserve and tie-down straps approx. every 600 mm. Height upper edge of body approx. 3,960 mm (laden). - Driving with an open sliding roof is not permitted and will cause damage to the curtain. Paintwork: Entire steel structure is shot-blasted automatically after welding using a wheel blast system. Second blasting with corundum for optimal coating system adhesion. HRM-metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection. Final painting with two layers of 2K topcoat, single colour, shade selectable according to RAL 841GL. Rear section metalized and painted RAL 9010 (pure white). No metallic paint.

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Bedpfx Amjtvfkfjtoli Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.050 mm, skupna širina: 2.550 mm, Oprema: ABS, Meusburger MPG-3 Nizkopodnožno prikolica s ponjavo, krmiljena/dvigljiva os Blodpswfwd Dsfx Amtsi Oprema: zračno vzmetenje * Tehtnica za os * 1. os dvigljiva * 3. os krmiljena * Hidravlična rampa z dodatno podporo in daljinskim upravljanjem * Prehodna rampa * Električni vitel z daljinskim upravljanjem * Edscha streha * Stranski zaboji za shranjevanje * Rezervno kolo s standardno pnevmatiko * Dodatni žarometi * Izvlečne table za izredne širine Varnost: ABS * EBS * Kolutne zavore Pridržujemo si pravico do napak in predhodne prodaje. Interna številka vozila: 8303

Stanje: rabljeno, prva registracija: 01/2016, dolžina tovornega prostora: 13.382 mm, širina tovornega prostora: 2.410 mm, višina nakladalnega prostora: 3.157 mm, * SAF osi * Hidravlična nakladalna rampa * Hidravlične oporne noge * Vitel * Daljinsko upravljanje * Edscha ponjava -----Interna številka vozila: 11079----Pridržujemo si pravico do napak in vmesne prodaje Na voljo podpora preko WhatsAppa! Za vprašanja o vozilu ali dodatne informacije nam lahko preprosto pišete preko WhatsAppa. Bjdpfewz Dm Dex Amtsli WhatsApp: nemščina, angleščina -- WhatsApp: nemščina, angleščina, arabščina

Stanje: rabljeno, največja dovoljena obremenitev: 34.030 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2026, skupna širina: 2.480 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Complete configuration upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick loading area; loading area behind the gooseneck hydraulically raisable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings on the front central beam (LC 10,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of ca. 20 x 20 cm) over axles with checker plate covering Two-piece steel ramps: * One pair of galvanized, two-piece reinforced steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating floor C40/5 (point load approx. 8 t on an area of ca. 20 x 20 cm) * Ramp with hydraulically folding and retractable ramp sections and hydraulic lifting device, max. load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps shorter than 300 mm do not count towards the vehicle length of 16,500 mm in driving position Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 fixed axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Bodpoy Nu Hksfx Amtsli Colours: * Semi-trailer RAL 3002 carmine red * Rims silver * Tarpaulin in RAL 9006 silver Incl. accessories: * 1 spare wheel holder under the load bed, right hand side * 2-inch kingpin * Galvanized steel front wall * Yellow-red air couplings at the front galvanized connection rail * 4 wheel chocks with holder at the front wall * 3 heights of wooden planks * Galvanized folding supports under the loading area bevel * Height-adjustable tarpaulin body, approx. 3,960 mm * Galvanized front wall with a tensioning system for sliding curtains * Roof by EDSCHA, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear wall) * 3 pairs of movable stakes/restraining pillars in the load bed * Structure at the rear can be hydraulically widened to the left and right by approx. 750 mm * Sliding tarpaulin with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of the body approx. 3,960 mm (loaded) * Driving with open sliding roof is not permitted and will damage the tarpaulin * Non-slip sand coating painted on checker plate sheets on the gooseneck and load bed * Cover plates to bridge the gap between the ramps and loading area * Electro-hydraulic unit mounted at the rear under the load bed * Mounting brackets for warning signs on both sides of the gooseneck and ramps, including socket * Control valves for the ramps on the right side of the semi-trailer * Grating floor C30/3 in the bevelled area of the gooseneck (point load approx. 2 t on a 20 x 20 cm area) * Grating floor in the bevelled area of the loading a...

Stanje: dober (rabljeno), obratovalne ure: 4.299 h, dvižna višina: 3.000 mm, Proizvajalec: KALMAR Tip: DCE100-6 Leto proizvodnje: 2010 Nosilnost: 12 t Lastna teža: 16 t Višina dviga: 3 m Delovne ure: 4.299 h Bledpfxev D Ixde Amtoi Oprema: Popolna kabina z grelcem, podaljšek vilic 2 m