Müller-Mitteltal Ets Prikolice nakup rabljenega (260)

Stanje: novo, največja dovoljena obremenitev: 8.600 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange towing eye ----Electrical / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Toolbox made of galvanized sheet steel on the right side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * Two mechanical hot-dip galvanized folding supports at the rear ----Tipper body: * Mesh hooks on the sides and rear in the central locking mounts plus 3 pieces on the outside of the front panel * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous, drop-down side walls without center stanchion, with drop-side spring lift assist * Rear drop gate can be swung down or used as a pendulum via manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load securing: * One flush-mounted, foldable 5 t lashing ring in each corner * Four flush-mounted, foldable 3 t lashing rings in the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment underneath the loading area, integrated into the chassis ----Tires: * Tires 235/75 R 17.5 Dujdpfx Ajv Dz N Ajf Usl ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted black * Drop side painted RAL 9010 pure white * Painting of the side walls in any RAL color possible for an extra charge * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline ----Braking system: * Wabco EBS * Emergency release system for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flanged towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin electrical connector * 13-pin auxiliary cable (12 V) Dusdpfxsq Euags Af Ujl * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General attachments: * Mechanical support winch front * Rear: 2 mechanical foldable supports * Plastic toolbox, right side * 2-step entry, front left (in the direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper body: * Mesh hooks on the sides and rear in the central locking supports, plus 2 on the front wall * Steel pallet tipper body (3-way tipper; full-length side walls—without center stanchions—with drop sides featuring sideboard spring assistance, rear tailgate foldable and swinging, with manual central locking) * 4 mm steel floor plate * Mounting rail at the rear for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing ring * Each side: 4 x 3 t lashing points recessed into the outer frame ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the cargo bed within the chassis from the rear ----Tyres: * Tyres: 385/55 R 19.5 ----Paint / Coating: * Chassis, drawbar, tipper body, front wall, sideboards, foldable supports, and rear stanchions hot-dip galvanized * Axles, springs, air tanks, flanged towing eye, and support winch painted in black * Sideboards are hot-dip galvanized ----Info: * Structure reinforced with EN 12642 XL load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic suspension with tandem equalizer ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural tractor units * LED tail lights ----General Attachments: * Mechanical landing gear at the front * 2 mechanical foldable supports at the rear * Plastic tool box mounted on right side * 2-step boarding step, front left in direction of travel * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks on the sides and rear, located in the central locking mounts, as well as 2 units on the bulkhead * Steel pallet - 3-way tipper body (continuous side walls – without central stanchions –, foldable with drop side spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor plate * Rear ramp mounting track ----Load Securing: * Each corner equipped with 1 x 5 t lashing point * Additionally, 4 x 3 t lashing rings recessed into each outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area in the chassis, accessible from rear Dusdsl Thw Iopfx Af Uel ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, drop sides, folding supports and rear stanchions hot-dip galvanized * Springs, air tanks, flange towing eye and landing gear painted in black * Drop sides hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 20.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 flatbed: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering function, including RTR function * 1st axle liftable * Last axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (lock of the trailing axle from the tractor for maneuvering purposes – no installation required on the truck side – connected via PIN 10 in the 15-pin connector, for maneuvering only, not for public road use) * SmartBoard control box as an infotool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no installation required on truck side * Fixed center drawbar with 50 mm flanged towing eye (loaded 900 mm, height adjustment at head plate) * Mechanical landing gear at the front, mechanical swiveling supports at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the approach slope * Folding rear stanchions * Steel rear wall slid in front of the rear stanchions * Mechanically adjustable warning panel kit at front and rear * Toolbox made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, mounted right side * 15-pin electrical connector * LED tail lights * Removable LED beacon including bracket and installation * 2 x LED reverse lights at rear of vehicle (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir wooden floor * 400 mm plug-in steel front wall * Perforated outer frame, approx. 45° bent, with provisions for mounting 3 t drop lashing brackets * In each corner 1 x 10 t lashing ring, additionally on each side 2 x 10 t and 3 x 6.3 t lashing rings Djdpfx Ajr Dpzxjf Uoul * Various holes for 1.2 t lashing options in front and end crossmembers * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm, mechanically adjustable laterally * 4-section hydraulic control block for possible retrofitting of hydraulic ramp sliding * Chassis, drawbar, front wall, mechanical rear supports, loading ramps hot-dip galvanized * Axles, air tanks, flanged towing eye, and front landing gear painted in a shade of black * Hydraulic flow divider in the trailer (for truck-side hydraulic pump capacity of over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 13/2026 * Sample pictures (photos of the vehicle may differ due to special equipment)

Stanje: novo, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2026, * KA-TA-R 18 ----Brake System: * EBS-E (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping operations ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting with galvanized protective roof ----Drawbar Eye / Drawbar: * Drawbar with 50 mm flange drawbar eye (adjustable by +77 mm and -33 mm via offset plate) ----General Attachments: * Landing gear at the front * Foldable galvanized steel underrun protection for paver loading * Closed individual plastic mudguards * Front wall platform made from grating with step at the drawbar and handrails on the front wall ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Steel 3-way tipper body with asymmetrical aluminium side walls – continuous without central stanchion – pivotable via manual central locking and left side fold-down function with drop side spring lifter * Rear wall made of HBW 400 steel, pivoting via automatic 2-claw lock * 5 mm steel floor plate made from HBW 450 steel ----Load Securing: * 4 x 3 t lashing rings per side - recessed and foldable - integrated into the steel floor Dodpfxox Ipbye Af Uoul ----Tarpaulin: * Roll tarp - agate grey, similar to RAL 7038 * Tarp tensioning via side tensioning ratchets and tensioning rubbers at front and rear ----Paintwork: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air tank, landing gear, and flange drawbar eye painted in a shade of black * Body painted in RAL 9010 pure white ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 t * New vehicle without initial registration, with manufacturer warranty * Subject to errors and prior sale * Sample pictures (vehicle images may differ due to special equipment) ----Delivery Time: * Vehicle available from calendar week 16/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign sets front and rear * Front axle fitted with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with spray protection * Reflective contour tape, sides and rear * Hinged lid (hot-dip galvanized) for toolbox on turntable platform * Multivoltage electrical system Duedpfx Afsx Ipbts Uel * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Each side with 4 stake pockets (stakes not included) including lashing option * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-certified swiveling and lowerable lashing rings, loadable in all directions and integrated into the outer frame - in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not on rear chamfer) * Widening boards stored in the center of the loading area * Excavator arm rest above the rear axle up to the end cross member approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the excavator arm rest) * Hydraulically-operated one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross vehicle weight up to 30,000 kg technically possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from CW 12 / 2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underride protection * Swiveling supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and at rear * Flip cover (hot-dip galvanized) for toolbox in turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with integrated lashing option * Load securing package includes: two lashing eyes (6.4 t) at front left & right on main frame of turntable platform, five pairs of UVV lashing rings, tiltable and lowerable, loadable in all directions and flush-mounted in outer frame – 13.4 t in corners, otherwise 10 t * Six pairs of mechanical folding extensions for 3 m overall width (not in rear corner) * Widening planks stored in center of loading area * Excavator arm rest from rear axle to end cross member, approx. 2,100 mm long (two pairs of 6.4 t lashing rings lateral on excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shifting * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen deck height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen deck height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Curb weight: 5,900 kg * -- Technical max. permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from calendar week 12 / 2026 Dusdpfx Ajx Ipb Hjf Ujl * Sample pictures

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: Djdpfx Afjxf Sk Ns Usul * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) Dodpfxox Ipbgs Af Usul * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at rear * Side underrun protection * Swing-out supports at the rear on the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirting, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and lowerable lashing rings, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stored in the center of the loading area * Excavator boom holder over rear axle up to the end carrier, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side in the excavator boom holder) * Hydraulically one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and interim sale reserved * Available from week 12 / 2026 * Sample pictures

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone Dodpfexf Skpjx Af Ujul ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Dedpfexf Sk Aex Af Usul * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RAK 18.0 External Roller with Rear Tipping Function ----Brake System: * Wabco EBS-E (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is disengaged) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox – approx. 858 x 500 x 500 mm – mounted on the right side * Enclosed plastic mudguards front & rear axles * Enclosed side underrun protection * Rear underrun protection bolted * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable "A"-sign at the rear * Rear impact protection buffers ----Electrics / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * Two additional LED reversing lights * TPMS (Tire Pressure Monitor System) ----Suitable for Container Lengths: * suitable for containers from 6500mm to 7000mm ----Container Running Surface / Tipping Bridge: * External roller guide through flat steel rails with a clear width of approx. 2,180 mm combined with three lateral centering pieces on each side for container guidance * To support and stop the container rollers, two rear, recessed, tipping frame-mounted roller bearings with pneumatically operated longitudinal securing are supplied * The positive locking of roll-off containers is accomplished via a front-installed, externally controlled, pneumatic cross clamping unit (one-sided operation) * Inner chassis with rearward-tipping main frame - engine hydraulically powered tipping device (single-cylinder design) Djdox Ipbmspfx Af Ujul * Tipping angle 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front, hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking parts (without final coat) * Bogie, air tanks, axles, slewing ring and drawbar painted in black tone * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale * Sample images (vehicle images may differ due to optional equipment) ----Delivery Time: * Available from week 24/2026

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Duedpfx Asxf Skvsf Usl ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Pivoting supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel mud flaps, each with splash protection Dedpsx Ipa Njfx Af Usul * Reflective contour tape on the sides and rear * Foldable (hot-dip galvanized) toolbox lid on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Towing drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical plug * Four stake pockets on each side (no stakes present) with lashing possibilities * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-certified lashing rings, swivelable and lowerable, loadable in all directions and recessed into outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not present at rear taper) * Widening planks stored in center of load area * Excavator arm support over rear axle up to end beam approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on sides of excavator arm support) * Mechanically single-piece loading ramps with spring system (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach ramp) * Chassis, bogie, towing drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black shade * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * -- Technically possible gross weight of 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 12/2026 * Sample image

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: Djdpfel Thyxjx Af Usul * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: novo, največja dovoljena obremenitev: 10.980 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: Djdpsx Ipbajfx Af Uoul * Parabolic springs with equalizer unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with indicator option in the truck via EBS signal (no installation required on the truck side) * 15-pin power socket * LED tail lights 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Support winch at front * Externally mounted, hot-dip galvanized foldable support legs at rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted externally at the front right on the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of the headboard for retrofitting container locks * Bolted flat steel headboard * Fold-down, trapezoidal-profiled steel side walls with dropside spring assist * Retractable steel rear wall between the ramps – storage holder when not in use in front of the headboard * Bolted rear stanchions * Rear ramp approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick, 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick, 210 mm wide rubber strips in the ramp approach and on the outside of the low-loader platform (running from headboard to rear beam) ----Load Securing: * Perforated outer frame, bent approx. 45°, with 2-ton lashing capacity every 480 mm * Preparation for installation of 3-ton folding lashing shackles every 600 mm * One 6.3-ton lashing ring each in the corners at front and rear * Various holes in headboard and rear beam for additional 1.2-ton lashing options ----Ramps: * One-piece mechanical gratings ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be pushed together to 20 mm) ----Paintwork: * Chassis, drawbar, headboard, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * Reinforced and certified superstructure to EN 12642 XL including load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer’s warranty * Sample images shown (actual vehicle images may vary due to optional equipment) ----Delivery time: Vehicle available from week 10/2026

Stanje: novo, največja dovoljena obremenitev: 13.350 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 11 m³, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (no truck-side installation required) * 2 x 9 ton Gigant axles * Air suspension with ride height control during tipping operation * Drawbar with 50 mm flanged draw eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gear at the front * Folding galvanized steel underrun protection for paver feeding * Enclosed plastic single mudguards * Standing platform at the front wall Duodpjxl Nkgofx Af Uol * Manual roll tarpaulin * 15-pin power connector * LED tail lights with galvanized protective cover * Chassis made of fine-grain steel * Steel three-way tipper body (side walls with MM profile – continuous, without central stanchion – swinging via manual central locking and left-side fold-down with tailgate spring lifter) * Roll tarpaulin similar to RAL 7038 agate grey with tarpaulin tensioning using lateral ratchet tensioners and tension cords at front and rear * Front wall platform made of grating with access step on the drawbar and a handhold on the front wall * Rear wall (made of HBW 400 steel) swinging via automatic twin-claw lock * 5 mm steel floor made of HBW 450 steel * 4 x 3 ton recessed and foldable lashing rings on each side—embedded in the steel floor * Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate up to 19 tons * Tipping body and side walls in RAL 9010 pure white * Paintwork of the side boards in RAL 9010 pure white * Painting of the side walls in an RAL color shade available at extra cost * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available from week 11/2026 * Sample images (vehicle photos may differ due to special equipment)

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, RAK 18.0 External Roller with Rearward Tipping Function ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when disconnecting the brake) ----Towing Bar: * Pneumatically lowerable drawbar, approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side * Enclosed plastic mudguards front & rear axle * Enclosed side underrun protection * Bolt-on rear underrun protection * Storage box for container nets made of galvanized perforated sheet, approx. 1,000 x 500 x 500 mm * Foldable A-board at the rear * Rear impact protection buffers ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reverse lights * RDÜ tire pressure monitoring system ----Suitable for Container Lengths: * For containers 6,500 mm to 7,000 mm ----Container Running Surface / Tipping Platform: * External roller guidance through flat steel limits at approx. 2,180 mm clear width, in combination with 3 centering pads per side for container guidance * For accommodating and supporting the container rollers, there are 2 recessed, tipper frame-connected roller mounts at the rear, with pneumatic safety lock against longitudinal movement * The positive locking of the roll-off containers is by a pneumatic cross-clamping unit (operable from one side), installed at the front of the tipping frame and accessible externally * Chassis frame with internally rearward-tipping main frame - hydraulically operated tipping unit (single-cylinder design) * Tipping angle 42° * Rubber pads between chassis and tipping frame * Loading of containers from the front; hot-dip galvanized chassis ----Tyres: Dedpfxex Ipa Aj Af Usul * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking parts (unfinished, without top coat) * Bogie, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle, no initial registration, with manufacturer warranty * Subject to errors and prior sale * Sample photos (vehicle images may vary due to special equipment) ----Delivery Time: * Available from CW 24/2026

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system Dsdjl Thymopfx Af Uoul ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, največja dovoljena obremenitev: 10.980 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon at the rear ----General Equipment: * Landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * Device for subsequent installation of container locks in front of the bulkhead * Bolted smooth sheet steel bulkhead * Side walls made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, retractable between the ramps – with holder for storage inside at the bulkhead when not in use * Screw-fastened rear stanchions * Rear approach ramp approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick, 270 mm wide rubber strips on the inner side of the ramps * 12 mm thick, 210 mm wide rubber strips in the approach ramp as well as on the outside of the low-bed platform (from bulkhead to end crossmember) ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various boreholes for 1.2 t lashing points in bulkhead and end beam ----Ramps: * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm) ----Painting: * Chassis, drawbar, bulkhead, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and flange towing eye painted in black shade * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body according to EN 12642 XL, incl. load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty * Sample images (Vehicle images may differ due to optional equipment) Dsdpfxex Ipape Af Ujul ----Delivery Time: Vehicle available from week 10/2026

Stanje: novo, največja dovoljena obremenitev: 20.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco-axles * Air suspension with lift/lower system and RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN in reverse gear (locking of the trailing axle from the towing vehicle for maneuvering purposes – no installation required on truck side – assigned to PIN 10 in the 15-pin connector, only for maneuvering, not for use on public roads) * SmartBoard operating box as infotool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no installation required on truck side * Fixed central drawbar with 50 mm flange eye (loaded 900 mm, height adjustment at the head plate) * Mechanical landing leg at the front, mechanical swivel supports at the rear on the chassis * Mechanically adjustable warning board package front and rear * Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm mounted on right-hand side * Hydraulic flow divider * Continuous side walls (without center stake) up to the drive-on slope * Folding rear posts * Steel rear wall inserted in front of the rear posts * 15-pin electrical plug * LED tail lights * Removable LED beacon including bracket and installation * 2 x LED reversing lights at vehicle rear (activated by reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir timber floor * 400 mm steel front wall slotted in place * Perforated outer frame approx. 45° angled, with provision for mounting 3 t folding lashing rings * 1 x 10 t lashing ring at each corner, plus 2 x 10 t and 3 x 6.3 t lashing rings per side * Various holes in the front and rear crossmembers for 1.2 t lashing capability * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable laterally * Four-way hydraulic control valve for potential retrofit of hydraulic ramp shifting Duedpfx Aor Dpz Asf Uol * Chassis, drawbar, front wall, rear mechanical props, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing leg painted in black * Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 l/min to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from week 13/2026 * Sample pictures (photos of the vehicle may differ due to special equipment)

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders Duodpfjx Ipavox Af Usl * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle closed plastic fenders and rear axle straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Foldable cover (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four side stake pockets each side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions, recessed into the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for an overall width of 3 meters (not in the rear slope area) * Widening planks stored in the center of the loading area * Excavator arm rest over rear axle up to the end beam approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp movement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- total technical permissible weight of 30,000 kg possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 12/2026 * Sample photo

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Drawbar Eye: * Drawbar height-adjustable by 300 mm * 40 mm flanged drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted on the front right side of the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: Dujdpfx Afsq Ra D Eo Ujl * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled steel drop sides with spring-assisted opening * Steel rear wall can be inserted between the ramp holders in front of the bulkhead when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * Single-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyre size: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes and loading ramps * Sideboards painted RAL 9010 pure white * Painting of side walls in other RAL colours available at surcharge ----Notes: * Errors and prior sale reserved * New vehicle with manufacturer's warranty ----Delivery Time: ? Available from CW

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering function * Fixtures at front wall and rear slope for retrofitting container locks for transporting 20" containers * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at front * External folding supports at rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * 21 t GVW version with reinforced chassis and axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fixtures at the front wall for retrofitting container locks * Bolted front wall made from smooth sheet metal * Split, folding trapezoidal-profile steel side walls with central drop-in post * Steel rear wall, retractable between ramps; bracket inside front wall when not in use * Rear posts bolted * Perforated external frame bent to approx. 45°, with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm * 1 x 10 t lashing point each in the front and rear corners Djdel Tihxepfx Af Usul * Lashing package with 2 x 8 t recessed lashing rings per side in external frame, various holes for 1.2 t lashing in front and rear crossmember * One-piece mechanical mesh ramp with spring mechanism for one-man operation, approx. 3,000 x 620 mm (collapsible to 20 mm) * Approach angle at rear approx. 860 mm on chassis * Drawbar, front wall, rear gate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear finished in black paint * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Sideboard colour freely selectable until about 2 weeks before production date (excluding metallic and special colours) * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 15 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations * Drawbar with positive-locking height adjustment and 50 mm flange tow eye * Landing gear at the front * Outward-folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards * 15-pin 24 V connector * LED tail lights 12/24 V integrated in underride guard * Steel platform - Three-way tipper body made of fine-grained steel with high M-Strong drop sides and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet metal * Hardwood pad for excavator bucket, bolted onto the front wall * Continuous side walls - foldable without centre stanchion, with drop-side spring assists and pendulum function via manual central locking * Rear posts bolted * Combination steel swing doors at the rear, asymmetrically split 2-leaf, swivelling up to 270° and lockable, not fold-down, with additional pendulum frame for automatic tailgate opening during tipping process; locking via galvanised rotary bolt lock and central locking; deactivation function for automatic tailgate opening when tipping backwards with open swing doors * Each corner with 1 x 7 t lashing point, and 4 x 3 t lashing rings per side integrated into the outer frame * 4 mm steel floor plate * Two-step access on left front * Mounting rail at the rear for approach ramps * Rear compartment for approach ramps integrated into the chassis * 1 pair of aluminium approach ramps (10 t per pair) approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles Dsdpfx Aovin Ucsf Uoul * --Load securing certificate according to EN 12642 XL? * Chassis, drawbar, rear posts, front wall, tipping bed, underrun protection, rear folding supports hot-dip galvanised * Side walls KTL-coated, tailgate painted in RAL 9010 pure white * Painting of side walls in any RAL colour available at extra charge * Axles, air tanks, flange tow eye, front landing gear painted black * Subject to errors and prior sale * Available from calendar week 15 / 2026 * Sample images (vehicle images may vary due to special equipment)