Doll Prikolica Za Gradbene Stroje nakup rabljenega (79)

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2008, barva: zelen, voznikova kabina: drugo, vrsta prenosa: drugo, širina tovornega prostora: 2.300 mm, dolžina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 1.750 mm, Leto izdelave: 2008, Vehicle location: Bovenden, steel body, tarpaulin and bows, lashing eyes. Removal from D-Benz Atego 1018A 4x4 - 79298 - , as-new condition! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Dcjdpfxsi Rp Ncj Af Ejn

Stanje: novo, skupna masa: 45.000 kg, lastna masa: 13.200 kg, največja dovoljena obremenitev: 31.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, barva: črn, velikost pnevmatike: 245/70 r 17.5, Oprema: ABS, Detachable gooseneck "Segmenti": - Hydraulically detachable gooseneck with external main frame, featuring integrated steering pick-up and individually operated push-off cylinders. - Integrated hydraulic cylinders and support arms for lifting and lowering the lowbed (support on the truck required). - Line connections to the lowbed each mounted inside the main frame kinks. - Holder for locking bolts. - Ladder with handrail for safe access. - All valves and distribution boxes are easily accessible and covered with aluminum panels. - Universal support arm for lifting and lowering the lowbed. - 6-way hydraulic coupling without relief valve for easy separation of hydraulic lines. - Duomatic air connection - 7-pin EBS electrical connector - 15-pin power supply connection - 10-pin control connection - 1 pair of plastic support pads for the lowbed without lateral holders. - 2 pairs of cut-outs for attaching hooks, 2000 daN lashing force. - 1 pair of swiveling lashing rings, 13,400 daN lashing force, mounted underneath the support arm. - 4 pairs M16 threaded holes for screw-in lashing points, 2000 daN lashing force, in the open outer frame. Lowbed (flatbed): - Telescopic flatbed frame. Frame pre-stressed for maximum payload, reduced payload in telescopic positions. - Outer side executed as an open U-profile. - Prepared for load area extensions. - Telescoping steps approx. every 500 mm + container positions. - Mechanical frame lock on the flatbed frame. - 7 pairs of swiveling lashing rings, 13,400 daN lashing force. - 5 pairs of stake pockets 100x50 mm in the outer frame. - 3 pairs of M36 threads on the outside of the telescopic frame for screw-in lashing brackets. - Prepared for the installation of container locks. - 2x 13,400 daN lashing rings welded onto the outer adapter facing the lowbed. Chassis platform: - Short wheelbase steel welded structure with rear-closed excavator well (baggermulde). - Drop to the lowbed, 300 mm x 15° chamfered, with 3 pairs of holes on the slope and rear for inserting approach ramps via locking pins. - Different track widths possible via three different hole positions. - Smooth steel floor with sand blasting welded over the axles, max. 8000 kg wheel load. - End cross member with cut-outs for lighting, designed as underrun protection according to ECE R58-003. - Powerbox with hydraulic control and electrical distribution installed at the rear of the excavator well. - Aluminum cover (approx. 500 mm) mounted over the powerbox. - Controls mounted at the rear. - 1 pair of lashing eyes, 2000 daN, recessed in the outer frame at the corners. Djdpfx Aslhqq Sof Eecn - 2 pairs of swiveling lashing rings, 13,400 daN, in the outer frame. - 2 pairs of stake pockets 100x50 mm recessed in the outer frame. Floor: - 45 mm spruce timber floor between the flatbed frames Chassis: - DOLL Panther-technology with split and suspended axles, BPW brakes, and ECO hub system. - All axles 12 t, with ABS, AGS (automatic slack adjuster). - All axles hydraulically forced steered, up to 55° steering angle on the last axle. - All grease points connected to central lubrication system. Tires: - 8 x 245/70 R 17.5 on steel rims Suspension: - Double wishbone suspension with hydraulic damping units. - Lifting-lowering system with 315 mm total stroke (-70/+245). Hydraulic Forced Steering: - Hydraulic dual-circuit displacement steering. Steering pick-up mounted on a turntable at the fifth-wheel coupling.

Stanje: rabljeno, skupna masa: 38.000 kg, največja dovoljena obremenitev: 24.640 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.100 mm, širina tovornega prostora: 3.000 mm, prva registracija: 08/2009, Leto izdelave: 2009, skupna širina: 2.550 mm, Oprema: ABS, Doll T2H-S3 excavator bed low loader with detachable gooseneck First registration, BPW Eco axles Hydraulically steered with radio remote control Air suspension Drum brakes with ABS and EBS Tyres: 245/70 R17.5 approx. 35% Gross weight: 38,000 kg, unladen weight: 13,360 kg, payload: 24,640 kg Maximum deck length: 670 + 540 cm Gooseneck: 405 cm Dcedpfx Afsvpm Nro Ejn Rear section: 275 cm Width: 255 + 2x30 cm Low bed height: 46 cm Loading height rear: 94 cm Excavator trough. Errors/mistakes and prior sale reserved.

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2007, barva: zelen, voznikova kabina: drugo, vrsta prenosa: drugo, širina tovornega prostora: 2.470 mm, dolžina tovornega prostora: 5.100 mm, višina nakladalnega prostora: 1.900 mm, Leto izdelave: 2007, Vehicle location: Bovenden, steel body, tarpaulin and frame, lashing eyes. Dismantled from Axor 1829 A, wheelbase 4,200 mm, as-new condition. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Djdpfx Afoi Rm Uns Eecn