Polpriklopnik z nizko nakladalno ploščadjo

DOLL Tiefbett T3E-S3FS25 panther

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WGOTHPE4560028329, skupna masa: 102.000 kg, vzmetenje: hidravlika, barva: rumena, Leto izdelave: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Deck / Low Loader Location: D - 73230 Kirchheim unter Teck Technical specifications according to original TÜV certificate: - Maximum speed: 80 km/h - Fifth-wheel load: 30,000 kg - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg - Gross trailer weight: 102,000 kg (with 30,000 kg fifth-wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination comprising: GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg - Maximum fifth-wheel load: 30,000 kg - Kingpin: 3.5" - Designed for direct installation of the excavator deck or connection of the 2-axle bogie - Central lubrication: Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle line load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Bogie width: 2,750 mm - Loaded deck height: approx. 1,240 mm (+/- 300 mm) - Central lubrication: Beka-Max EXCAVATOR DECK / LOW LOADER DECK - Payload: 67.75 t - Extendable: 6,000 – 14,000 mm - Main tube fixed to the rear 4-axle bogie - Claw coupling at the front - Main tube width: 1,350 mm - Inner tube width: 600 mm - Construction height: 440 mm Gisdpfx Afowzl Nmozol - Loaded deck height: 650 mm (ground clearance 210 mm) - Width adjustable from 2,750 mm to 3,250 mm - Sliding tables (weight 405 kg) - Folding extension boards (weight 1,955 kg) 4-AXLE BOGIE - Type XLE - Weight: 16,110 kg incl. excavator deck - Axle line load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Bogie width: 2,750 mm - Excavator arm recess: 700 mm - Loaded deck height: approx. 1,140 mm (+400/-200 mm) - Central lubrication: Beka-Max Good condition – German vehicle from first owner – available at short notice ex stock Kirchheim unter Teck – further information on request.

Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable, lowerable, and detachable - For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Gsdjh Hm Tzepfx Afzeil Lowbed: - Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Burst protection valve on the axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and plug pins for securing in raised position - Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Rear upper gooseneck area closed with removable cover - 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks - Ramps can be positioned over or between the hooks - Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck - Locking point approx. every 1,000 mm on the extension - 1 lashing ring each, left and right, on the front cross member - Supply line connection strip for tractor unit, mounted at the height of outer frame profile - 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings - 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards - 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings - Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering front and rear, cable remote controlled, with axle tracking control - 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches - Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering - Foldable extensions, approx. 230 mm per side - Loose extension boards, steel-edged - 4 warning signs approx. 423 x 423 mm - Radio remote control for rear steering - 3.5” kingpin - Anti-slip coating on the left chamfer of the gooseneck - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning signs when not in use - 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm - Excavator stick trough of rear chassis closed at the rear with a removable plate - Trailer color: Mercedes-Benz 7350 Novagrey

Stanje: rabljeno, največja dovoljena obremenitev: 23.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 19.100 mm, Oprema: ABS, Faymonville 3-Axle Multimax Low Loader F-S43-1AAF First registration: .23 Gross weight: 35,000 kg Technical permitted gross mass: 58,600 kg Gjdpfx Afju Ry T Rjzeil Unladen weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg Max. capacity: 11,200 kg + 11,200 kg + 11,200 kg Kingpin load / fifth wheel load: 11,000 kg Length: 13,675 mm, extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading platform: 13,300 mm, extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tyres: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV valid until: Further information available upon request by email! No guarantee for the accuracy of information/errors excepted! Details provided online are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability for errors, input mistakes and data transmission errors. Subject to change without notice. Permanent purchase and sale as well as trade-in and rental of crane and lifting vehicles as well as construction and heavy-duty vehicles.

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Godpeh Hm Thsfx Afzeil Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: novo, številka stroja/vozila: 3, lastna masa: 9.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: bela, Leto izdelave: 2022, Oprema: ABS, brand new Ceylan low loader semi-trailers available for immediate delivery, with double electro-hydraulic ramps, extendable outriggers, RUD hooks, 10m bed length, 85cm deck height, also available with grated ramps, EBS, 3 axles (1st liftable, 3rd steering), warranty included – DEALER: INTERDRIVE SRL - PARMA Gijdpfjhzaq Rox Afzjl

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) Gisdpfshlz R Sjx Afzsl - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 295.000 km, moč: 405 kW (550,65 KM), prva registracija: 10/2015, vrsta goriva: dizel, konfiguracija osi: 6x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2015, obratovalne ure: 1.828 h, Oprema: električno nastavljivo ogledalo, klimatska naprava, spojka prikolice, = Dodatne možnosti in oprema = - Aluminijast rezervoar za gorivo - Ojačevalnik zavor - Nizka raven hrupa - Zračno vzmetenje - Sončna zaslonka Gedpow Rc E Aefx Afzjil - Ksenonska razsvetljava - Kardanska gred (PTO) - Vlečna kljuka = Dodatne informacije = Konfiguracija osi Sprednja os: Krmiljena Zadnja os 1: Krmiljena Teže Lastna teža: 18.505 kg Nosilnost: 11.070 kg DGV: 29.500 kg Funkcionalno Dimenzije tovornega prostora: 420 x 255 cm Dvigalka: Da Znamka nadgradnje: Palfinger PK 53002-SH G CE označba: da Stanje Tehnično stanje: zelo dobro Videz: zelo dobro Finančne informacije Cena: Na povpraševanje

Stanje: novo, največja dovoljena obremenitev: 29.100 kg, skupna masa: 42.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.700 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2025, Oprema: ABS, * DOLL panther Fahrwerk + 5-Jahres-Garantie * DOLL tronic Bedien- und Steuerungssystem inkl. Funkfernbedienung * Hydraulisch abkoppelbarer Schwanenhals * Außenliegender Hauptrahmen * Hydraulische Lenkung Gedpfx Aegvhrrjfzjil * Umfangreiches Ladungssicherungspaket * Tiefbettlänge: 12.362 mm (6.700 mm + 5.662 mm) * Gesamtlänge: 13.110 mm (+5.662 mm) * Eigengewicht: 12.900 kg (+/- 2 %) * Optional umfangreiches Zubehör Dieser Auflieger ist ebenfalls mit einer Tiefbettlänge von 6.100 mm und kurzer Lieferzeit verfügbar. Abbildungen können vom Original abweichen. Angaben ohne Gewähr. Kontakt: Tel.:

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Gedsiu Er Aepfx Afzsil Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, največja dovoljena obremenitev: 65.400 kg, skupna masa: 93.400 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Pos. 1. Type STZ-VP 6 (245) (2+4) with pendle axles The specified technical data are valid only when using a 4-axle tractor unit with the following parameters: Gsdswg N N Ispfx Afzeil Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights at 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Permissible gross weight: 94,000 kg Tare weight: approx. 29,600 kg Payload: approx. 64,400 kg (*Depending on the load chart/easyLOAD calculation) Dimensions Dimension b: 18,765 mm Total combination length (): 24,165 mm Vehicle width Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Axle steering radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front bogie Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: opposite steering Flatbed (external frame) Single-extendable with separation point Length x width: 7,000 mm x 2,750 mm Extendable by/up to max. 3,400 mm / 10,400 mm Frame height: 300 mm Loading height loaded: approx. 450 mm 4-axle rear bogie Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering