Fliegl Prevoznik Lesa nakup rabljenega (302)

Stanje: rabljeno, številka stroja/vozila: a6d448c42c302ffbdb6a9c40f, lastna masa: 4.480 kg, največja dovoljena obremenitev: 13.520 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2014, velikost pnevmatike: 445/45 r19,5, Leto izdelave: 2014, Further information Fine-grained steel welded construction Prjdpfxsni Udzj Ab Nsd 1 gearbox support leg at the front, with straight lower section and one-sided operation on the right in direction of travel Wheel chocks with holder, aluminium side underrun protection, steel rear underrun protection Half-shell mudguards slightly protruding over main frame, rear impact protection buffers Trailer coupling device for tandem trailers Drawbar with tested 50 mm towing eye, freight forwarding version, undercoupling drawbar Axles and Suspension BPW disc brake axles, manufacturer’s choice Air suspension with lift & lower valve Wheels and Tyres 445 / 45 R 19.5, manufacturer’s choice, steel rims, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake, Duomatic connection at the front, with connecting hose to truck, EBS, Electronic Braking System with EBS connector at the front, with connection cable Brand: Haldex, Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! Floor: Platform length approx. 7,300 mm, phenolic plywood floor Front wall: Aluminium approx. 1,200 mm, corner stanchions steel in volume version Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane-holding lights at the rear 1 x 15-pin connector at the front, with connecting cable Approval / Plates Country of approval: Germany, with Dekra inspection and report 24/7 service hotline, prepared for single-line license plate holders, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Stanje: rabljeno, lastna masa: 3.140 kg, največja dovoljena obremenitev: 14.860 kg, prva registracija: 07/2022, naslednji pregled (TÜV): 12/2023, skupna širina: 25.500 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 55 R 22.5 / 14mm, velikost sprednje pnevmatike: 385 / 55 R 22.5 / 14mm, obratovalna teža: 18.000 kg,

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 2.150 mm, skupna dolžina: 10.700 mm, skupna širina: 2.550 mm, skupna višina: 3.750 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, barva: drugo, Leto izdelave: 2023, Oprema: ABS, = Further Options and Accessories = - EBS = Remarks = Number of axles: 3, Curb weight: 5,800 kg, Gross weight: 39,000 kg, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Year of body construction: 2023, Side wall material: Aluminium, Number of sides: 1 side, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Pjdpfx Ajw Hww Teb Nerd Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 12 mm; Tyre tread right: 6 mm Axle 2: Tyre tread left: 11 mm; Tyre tread right: 7 mm Axle 3: Tyre tread left: 15 mm; Tyre tread right: 12 mm Weights Unladen weight: 5,800 kg Payload: 33,200 kg GVW: 39,000 kg Functional Loading platform height: 145 cm Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering includes all European brands, construction years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Good pricing • Reliable trading • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of 'recognisable quality' • And more.... Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Stanje: rabljeno, lastna masa: 5.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, skupna dolžina: 2.550 mm, skupna višina: 13.100 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, Fliegl 30-foot tipping chassis | BPW axles | Lift axle | Alloy wheels | Excellent condition | Austrian vehicle Psdpfxowc T Its Ab Nsrd

Stanje: novo, številka stroja/vozila: d9c951d746f03c05bc5470f89, lastna masa: 5 kg, največja dovoljena obremenitev: 29.045 kg, skupna masa: 35 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis Semi-trailer Freight Forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2-inch kingpin Vario-stake system 4 pairs recessed into the loading platform, collapsible to 2,100 mm and extendable to approx. 3,500 mm for loading. Stakes can be locked every 100 mm within an internal width of 2,100 mm up to 3,000 mm. 4 pairs of divisible stakes (600 mm + 1,200 mm), total height 1,800 mm, removable. For inner stake width from approx. 2,350 mm: oversize. Vario front walls Floor prepped to fit 3 front walls. 4 x 5 pairs of Vario stake pockets for plug-in front walls (each front and rear) and 1 x 3 pairs central for transporting reinforcing mesh 2 x 5,000 mm or 2 x 6,000 mm. 2 pieces of Vario front walls, each comprising 1 pair of plug-in stakes and 1 upper crossbeam approx. 2,200 mm wide. Crossbeams can be extended by 220 mm on both sides, with lashing holes for tensioning. Height of Vario front wall approx. 1,900 mm, convertible to height 1,300 mm or 700 mm. 4 stake pockets centrally recessed in floor for 80 x 80 mm plug-in stakes 1 pair of lower supports for Vario front wall (front) 1 pair of lower supports for Vario front wall (rear) Outer frame slightly sloped with load-lock profile for attachment of lashing straps 14 extra pairs of lashing rings set into the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-sided operation, with straight base, no load equalizer Pull-out ladder at rear Wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Quarter shell mudguards in front of and behind axle assembly With anti-spray mud flaps only on last axle Rear impact protection bumper 8 reinforcing mesh winches with wire rope and counter hooks, 4 left and 4 right, wire guided through the external frame, 1 detachable plug-on gear for reinforcing mesh winches (supplied separately, no bracket on frame) 1 spare wheel holder for 1 E-wheel, with wheel fastening kit 1 plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (lock not included) 1 stake storage box, closed but open at the top, below loading bed, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 4 transverse lashing/stake rails recessed in the floor across the full width to the outer frame (max. usable interior width between outermost plug-in stakes approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, 60 mm distance between top and bottom (of the round steel). Bottom with angle steel edge, half open down. For lashing and plug-in stakes 80 x 80 mm. Note: Stake pockets/plug-in stakes are not designed for the sole securing of long goods, pipes, etc. without lashing Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, operated by braking 3x (Traction aid is active up to axle overload of 30% and a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake system, color-coded piping for easy service Spring-applied parking brake 2 non-interchangeable coupling heads at front, without connecting line Prjdpfoi Ri R Djx Ab Nod EBS, electronic braking system with EBS socket at front, no connecting cable Note: The towed vehicle may only be towed by towing vehicles

Stanje: novo, številka stroja/vozila: 4499ca1b286f9f653066b5693, lastna masa: 4.900 kg, največja dovoljena obremenitev: 27.100 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis semi-trailer tipper Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front wall, patented 24 t, 2-speed landing gear, single-side operation, with straight base, without compensating tube Wheel chocks with bracket Foldable underride guard Half-shell mudguards Tarp bar with mount Tow hook at the rear Axles and Suspension SAF disc brake axles Axles/chassis laser-aligned for reduced tire wear and fuel consumption Podpfx Aboi Ri Nis Njrd Offroad version axles Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, activation by pressing the brakes 3 times (the starting aid functions up to a 30% axle overload and a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Braking system 2-line compressed-air brake system, color-coded lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting hose EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver Electrics 24 volts, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, lowest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck PTO Tipping body Steel round tipper body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic unit and ladder at the front wall. Greenline – conical and aerodynamic tipper body shape Shovel and broom holder outside on the front wall. Membrane rear wall Rear wall as a pendulum gate with double joint hinge, external, with 2-point hook locking. 2 clamps with toggle fasteners at the bottom sides. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized design. Standing platform with access steps, connector plate for air/electric and brakes with large clearance for optimal operability. Roll tarp set down on FR-right, with central lock on FR-left Operating instructions For transports involving salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material damage and rust. The stated gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing the permissible axle, support, and fifth-wheel loads. (Improper weight distribution may result in poor driving and tracking behavior) Country of registration / signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048: lateral white and rear red Paintwork Frame DB 7350 Novagrau, 10-year warranty against corrosion Landing legs coated black Tipper body RAL 7035 light grey Fliegl advertising StoneMaster on sides and rear Roll tarp RAL of choice, single-color Also available with hydraulic tailgate Available therm...

Stanje: novo, številka stroja/vozila: 71cc13750cef13b72f7a55abe, lastna masa: 5.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22,5², Further Information Chassis semi-trailer tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Patented curved front panel 24 t, 2-speed landing gear, single-sided operation, straight lower section, without sliding compensation 2 wheel chocks with holders Folding underride guard Half-shell mudguards Integrated mudguard brackets, stone-resistant surface With anti-spray mudflaps only on the last axle 1 tarpaulin bar with holder 2 tow hooks at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-calibrated axles/chassis for reduced tire wear and fuel consumption Axles in off-road configuration Air suspension Pjdpfx Aboi Ri Efj Nord 1st axle automatic lift axle, including forced lowering and drive-off aid, activation via 3x braking (drive-off aid functions up to 30% axle overload and a max. speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake System 2-line compressed air brake system with color-coded lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system, with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift and lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Control hydraulic via truck auxiliary drive Body Aluminum box-type body made of high-grade, abrasion-resistant material, front wall 5 mm thick, outer side walls from 30 mm hollow-chamber profiles, clean welded, with bulk material-repellent top rail profile. Internal access at the front wall (not compatible with Cramaro system). External shovel and broom holder on the front wall. Greenline—conical and aerodynamic body shape Membrane rear wall Rear wall pendulum mounted with double-link hinge and divided 2-leaf door (1⁄2 to 1⁄2), upper swing bracket, each door with a grain slider Rear wall with rubber seal Note! Heat-resistant to max. 170°C! Floor completely 6 mm thick Standing platform with ladder, connector plate for air/electricity and brake with large clearance for optimal usability Roll tarp stored on right side (FR-right), central locking on left side (FR-left) Operating Instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion. The specified total weight is technically possible; depending on the load, the permissible axle, support, and fifth wheel loads may not be reached (poor driving and trailing performance may result from incorrect load distribution) Registration/Country Marks Germany Test approval per EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, white on sides and red at rear Paintwork Chassis DB 7350 Novagr

Stanje: novo, številka stroja/vozila: b50cac2c60a813b0968994fa0, lastna masa: 5.700 kg, največja dovoljena obremenitev: 18.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Full-width rear mudflap Preparation for widening to 3,000 mm (holes in outer frame, not in rear bevel) Low-loader lashing rings 1 pair of lashing cutouts embedded in the front longitudinal beam at the gooseneck, each rated for 10 t 7 pairs of lashing mushroom pins embedded on top and side of the outer frame, each rated for 10 t 1 x on the front gooseneck 5 x in the low-bed area 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated for 5 t (for lashing strap hooks) 5 x at the gooseneck, 6 x in the low-bed area, and 1 x in the rear bevel Drawbar system for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles, brand as per manufacturer’s choice Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires Pedoi Ri Agopfx Ab Nerd 235 / 75 R 17.5 Fulda Steel rims in twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 unmistakable coupling heads at the front, with connecting lines to the truck, Connecting lines extended by approx. 60 cm No ABS, but with mechanical ALB (automatic load-dependent brake valve), thus maximum 60 km/h permit Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 7-pin 12 Volt plug at the front with connecting cable, extended by approx. 60 cm 1 LED beacon with holder, operated via parking light (lamp removable) 2 pairs of illuminated and extendable warning plates up to 3,000 mm Floor Front gooseneck with steel/chequer plate covering Toolbox recessed in the drive-over slant to gooseneck Following area with 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-bed loading area including rear bevel: 5,900 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wooden covering Spring-assisted lifting Operating Instructions For axle loads of 10,000 kg, an exemption permit is required; only indivisible loads permitted!!! The stated total weight is technically possible; depending on the load, the total weight may not be achievable within the allowable axle/support and fifth wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle as agricultural/forestry vehicle (LoF), (for Switzerland, max. 40 km/h possible) Prepared for double-line license plate holder No contour markings / reflective tape according to ECE R 048 Painting Frame: DB 7350 Novagrau 10-year corrosion protection warranty Drawbar galvanized or black, according to manufacturer’s choice Loading ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: c76adb6e28bcbb16ded40eebd, lastna masa: 1 kg, največja dovoljena obremenitev: 4 kg, skupna masa: 6 kg, konfiguracija osi: 1 os, velikost pnevmatike: 15.0/55-17 10 pr, Further information Chassis Central Axle Tipping Trailer Steel welded construction Heavy-duty, foldable front support wheel Chocks with holder Rear underrun protection, steel Quarter shell mudguards Central axle trailer coupling system Rigid drawbar for high mounting, 40 mm towing eye Height-adjustable drawbar with spindle, max. adjustment range 300 mm Axles & Suspension Rigid Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing) Wheels and Tires 15 PR Manufacturer's choice Steel rims, factory silver Brake System Inertia brake with reverse automatic Shut-off valve Integral air reservoir 2 non-interchangeable coupling heads at the front, with connection lines to the truck, ABS and ALB with ABS plug at the front and connection cable Electric System 12 volts, 2 five-chamber tail lights, no lighting carrier, impact-resistant glass 2 white position lights at the front 2 white/red lane marker lights at the rear 7-pin connector Hydraulics 3-stage tipping cylinder Limit switch Hydraulic connection with SVK plug NW 10/3, incl. connection hose Prodpsi Riypefx Ab Njd Hydraulic operation via truck PTO Tipping platform Robust tipping platform, steel dropside construction, continuous, foldable, and pendulum-mounted side panels Platform length approx. 4,000 mm, side walls with 5 bottom hinges Platform width 2,020 mm 4 pairs of lashing eyes in the floor, each rated for 2.5 tonnes Country of Registration/Plates Country of registration: Germany with DEKRA approval and expert report (acc. to §13 EC FGV) 24/7 service hotline Prepped for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear Coating Frame hot-dip galvanized incl. passivation, 15-year warranty against rust-through Sidewalls/platform RAL 6005 Moss Green

Stanje: novo, številka stroja/vozila: 6650f95fd39bb5625662ee336, lastna masa: 7.550 kg, največja dovoljena obremenitev: 27.450 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22.5, Further Information Chassis Semitrailer for Haulage Companies Fine-grain steel welded construction in lightweight design, reaching down to the landing legs, fifth wheel plate with replaceable 2" king pin Prepared for lashing eyes in the floor on the side (up to 13 pairs max.) 24 t two-speed landing gear, operated from one side, with straight base section, without stroke compensation Slide-out ladder at the rear Side-mounted door retainers 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection with wide Fliegl mud flap, foldable splash guard for lighting unit Quarter round mudguards Rear impact protection Aluminium ladder approx. 3,550 mm with side holder Tarpaulin support bar with bracket 1 plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel securing kit Axles & Suspension Prjdpfx Absi Riwxs Ned SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, operated by applying brakes 3 times (starting aid functional up to 30% axle overload and up to 25 km/h max. speed) Brake System 2-line compressed air brake system, colored piping for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without interconnection EBS, Electronic Braking System with EBS socket at front, without connection cable Note: This trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve Vehicle Stability Control System Wheels and Tires 385/55 R22.5 tyres, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without interconnection cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated in the floor. Dual-circuit hydraulics. Forward/reverse stroke selection is electric via cable remote control. Sliding floor power supply via parking light Actuation hydraulically via truck PTO Hydraulic connection with hose to front wall and HDK screw coupling NW = 48 mm Note: A dual-circuit hydraulic system is required! Recommended pump performance: Output: 110 l/min Pressure: 250 bar Oil tank capacity min.: 100 l SB Floor Sliding floor with wear plate at the rear Floor made of 8 mm aluminium planks, ribbed design SB Body Aluminium box-type body made of high-grade, wear-resistant material. Front and side walls made of aluminum hollow profiles, circumferential upper edge welded with a wide special reinforcement profile of aluminum, lower edge welded with a special frame. Moving bulkhead for better unloading of cargo, with reinforced tarpaulin apron at the bottom With rail cleaner Rear wall made of aluminum hollow profiles, as double-leaf door, split 1/2 to 1/2, circumferentially framed with special U-profile with stop and rubber seal, with 2 external locking rods, locked top and bottom. Rear wall with mechanical security lock, operated at the rear to the left in direction of travel. With swiveling cross-beam at top. The door locks are padlockable. Standing platform with ladders on both sides (left/right in direction of travel) and railing, for opening

Stanje: novo, številka stroja/vozila: 745183e095a8a43501797c66c, konfiguracija osi: 2 osi, prva registracija: 12/2022, velikost pnevmatike: -, Further information Tandem Platform Trailer Type: TPS 180 Standard Building Materials with Forklift Mount Weights and Dimensions: Gross weight: 18,000 kg Unladen weight (base version) approx.: 4,600 kg +/- construction tolerance Payload approx.: 13,400 kg Drawbar load: 1,000 kg Overall length approx.: 9,925 mm Overall width max.: 2,550 mm Overall height approx.: 3,150 mm Internal length approx.: 7,750 mm Internal width approx.: 2,480 mm Platform height approx.: 1,200 mm Coupling height approx.: 380 mm Drawbar length approx.: 2,150 mm Chassis: Central axle trailer Fine-grained steel welded structure Outer frame slightly angled, new design with load-lock profile for lashing strap attachment 1 pair of mechanical support legs at the front, with straight base and single-side operation on the front right 2 wheel chocks with holder Side underrun protection: aluminium Rear underrun protection: steel Quarter-shell mudguards 2 plastic toolboxes with drawer and shelf insert, dimensions W=650 / H=520 / D=670 mm, can be locked via a padlock (padlock not included) Mounting bracket for truck-mounted forklift at rear, incl. 2 fork insertion sleeves, 2 extendable support tubes, mounting bracket for chain securing with locking pin. Rear underrun protection with lighting unit foldable. Includes 2 loose rubber guards to protect the rear wall, counterweight recommended! Note: Limited ground clearance possible when forklift is mounted, reduced tracking performance possible, no warranty! (Forklift own weight up to max. 1,900 kg on trailers). (With proximity switch for forklift control in combination with lift axle) Due to the forklift mounting, the axles are moved rearwards; consider load distribution when driving without forklift. Customer risk! Notice! Forklift mounting: Carrying a forklift can significantly relieve the drawbar load. Front counterweight required! On wet and slippery roads, an additional customer-side ballast weight or a load of at least 2 t at the front end wall is required; the speed must then be reduced and the driving behavior adjusted to road and load conditions. The forklift must always be secured with chains during transport. Distance from lift mast to body max. 45 mm, or the vertical forklift tines must rest against the end of the forklift pockets. We assume that the towing vehicle has neither a steering nor a lift axle, or that the steering axle is always locked, or the lift axle is always on the ground. Drawbar Central Axle Trailer Drawbar with certified 50 mm drawbar eye, logistics version (not suitable for trucks with tail lifts) Underrun drawbar Folding bracket with spring assist on the drawbar for guiding connection cables to the truck Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise/lower valve 1st axle: automatic lift axle with proximity switch, for lift axle (for use only with forklift) Wheels and Tires 385 / 65 R 22.5 At manufacturer’s discretion Steel rims, factory silver Braking System Predpfondwdhjx Ab Nod 2-line compressed air braking system Spring-loaded parking brake Vehicle driving stability system Duomatic connector at front, with connection to the truck, right hand side EBS: Electronic Brake System with EBS plug at front, with connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber LED lights, side amber LED lighting, license plate

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t Pjdpei Ri Rysfx Ab Nsrd 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: 8b1f4087611d72661dc0b3869, lastna masa: 4.500 kg, največja dovoljena obremenitev: 27.500 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/65 r22.5, Further Information Chassis semi-trailer tipper Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front closure, patented 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating ram Wheel chocks with holder Foldable underrun protection Half-shell mudguards Tarp bar with bracket Tow hook at rear Axles & Suspension SAF disc brake axles Axles/chassis laser-measured – reduces tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle is an automatic lift axle, including forced lowering and starting aid, activated by 3x braking (starting aid is functional up to 30% axle load exceedance and up to a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Braking System 2-line compressed air brake system, color-coded lines for easy servicing Spring-loaded parking brake 2 anti-mix-up coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at front, no connection cable Note: The trailer may only be towed by towing vehicles ensuring ABS functionality! With lift & lower valve Psdpfx Absi Ri Nfs Nord Vehicle stability control system Wheels and Tires 385/65 R22.5 Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red track-keeping lights at rear 2 x 7-pin anti-mix-up sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck PTO Body Steel round tipper body in Stone Master design made from highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic ram and access ladder at front wall. Greenline - conical and aerodynamic body shape. Shovel and broom holder outside at front wall. Membrane tailgate Tailgate as pendulum flap with double-jointed hinge, mounted externally with dual hook locking. 2 clamping screws with toggle locks at bottom sides. Side walls full-length 4 mm, floor 4/5 mm, wear- and weight-optimized construction Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operability Roll tarp to be stowed on FR-right, with central locking on FR-left Operating Instructions For transports involving salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated gross weight is technically possible; depending on the cargo, the maximum permissible total weight may not be reached due to axle/support loads restrictions. (Poor driving and trailing behavior may occur due to incorrect load distribution) Registration Country / Plates Germany Approval according to EC 2007/46 Body strength in accordance with EN 12642 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Nova Grey, 10-year warranty against corrosion Landing legs coated black Body RAL 7035 Light Grey Fliegl advertising StoneMaster on sides and rear Roll tarp in RAL color on request, single-colored Available as thermally insulated version: Cover BA

Stanje: rabljeno, številka stroja/vozila: ad30b7932fc8c63648546fc1b, lastna masa: 4.900 kg, največja dovoljena obremenitev: 33.100 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 265/70 r19,5, Further information Ex-display vehicle from 2006 – used internally and therefore shows signs of wear! Side underrun protection: Aluminium, from king pin to start of side underrun protection: 2,600 mm Rear underrun protection: Frame color, recessed and fitted flush with the end of the chassis as far inward as possible Chocks: 2 pieces with holders Bumper buffers: 2 steel buffers Podpoi Ri Hysfx Ab Nord Paintwork: Sandblasted base, 2-component acrylic paint Rims: Factory silver Approval: with DEKRA inspection

Stanje: novo, številka stroja/vozila: dd98a7658922be8f2e25bcadb, lastna masa: 2 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 10 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r 17,5, Further information Chassis Central Axle Trailer Low-bed Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 wheel chocks with holders Steel mudguards over both wheels Central axle trailer coupling equipment Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & Suspension Euro-axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5 (manufacturer’s choice) Factory silver steel rims Braking System 2-line compressed air braking system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, with connection lines to the towing vehicle, ABS and ALB, with ABS plug at the front, including connection cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin mistake-proof plugs at the front, including connection cable Body TTS Low-mounted steel trough, bridge floor made of steel/chequer plate covering, steel sidewalls solidly welded to the floor Bridge length 4500 mm; trough at the front and sides with load-lock profile for attaching lashing straps (8 points in front, 12 per side) Note: Slight floor waviness possible due to welding distortion! 2 pairs of lashing rings, one at the corners of the steel trough front and one at the rear floor, each rated 5t 2 additional pairs of lashing rings in the floor, each rated 5t Ramps Podji Ri Ebopfx Ab Njrd Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable, with hand grip on the ramps Wooden covering Gas spring assist for one-man operation Operating instructions The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable while observing the permissible axle/load and saddle loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Outline markings with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame RAL 3002 Carmine red Ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: 92df8e9d6c187f34b20298f39, lastna masa: 4.900 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22,5², Further information Chassis semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall - patented Central telescopic support leg, uncoupling under load not possible, in uncoupled position the vehicle must be sloped to the rear. 2 wheel chocks with holders Foldable underride guard Half-shell mudguards Integrated mudguard bracket, stone-repellent surface With anti-spray mudflaps only on the last axle 1 tarpaulin bar with holder 2 tow hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle: automatic lift axle including forced lowering and start-off aid, activated by triple brake application (start-off aid operational up to 30% axle overload and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake system 2-line compressed air brake system, color-coded piping for easy servicing. Spring-loaded parking brake 2 foolproof coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure operational ABS! With raise & lower valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof sockets at the front, without connection cable Hydraulics Low pressure cylinder, max. 170 bar, smallest section hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Activation hydraulically via truck PTO Bodies Aluminium box body made of high-grade, wear-resistant material. Front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top section profile. Interior with access ladder on front wall (not in combination with Cramaro). Shovel and broom holder mounted outside at front wall. Prsdpfx Aei Riz Rob Nsd Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall pendulum flap with double hinge, external with double hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Continuous 6 mm thick floor Standing platform with entry, connection plate for air/electrics and brake with large clearance for optimum accessibility. One-sided roll tarp deposit FR-right, with central locking FR-left Operating notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the transported material. The specified total weight is technically possible; depending on the load, the permissible total weight may not be achievable within the allowed axle/support/semi-trailer loads. (Poor driving and trailing performance may occur due to incorrect load distribution) Registration country / license plates Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white, rear red Painting Frame DB 7350 Novagrau 10 years

Stanje: novo, številka stroja/vozila: c3dd8c834afed73501f8074af, lastna masa: 3 kg, največja dovoljena obremenitev: 20 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22,5, Further Information Chassis Swap Turntable Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of guide rollers removable, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holder Side underrun protection in aluminium Rear underrun protection in steel Front and rear half-shell mudguards 2 stainless steel toolboxes, W=600/H=400/D=500 mm, with polished lockable doors 1 pair of warning signs double LED illuminated, extendable to 3,000 mm at the rear, rear only 1 prep socket for customer-side retrofitting of warning signs at front Turntable trailer coupling Drawbar with tested 40 mm towing eye Drawbar mechanically adjustable in length, 6 positions x 100 mm, and lockable (drawbar length approx. 1900–2500 mm) Drawbar height adjustment via spring Axles & Suspension BPW disc brake axles with 430 mm disc diameter Prjdpfxoi Riylo Ab Nod Axles/chassis laser aligned - reduces tyre wear and fuel consumption Air suspension with lift & lower valve Wheels and Tyres 385/55 R22.5 Brand at manufacturer's discretion Steel rims, factory silver Brake System 2-line compressed-air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to tractor unit, EBS, Electronic Braking System with EBS socket at front, including connecting cable Note: The trailer may only be towed by tractor units which ensure correct ABS functionality! Electrics 24 Volt, multi-chamber rear lights, yellow LED side markers 2 white position lights at front 2 white/red lane marker lights at rear Removable beacon 1 additional LED work light at the rear, switched via reverse light 2 LED work lights on both sides (1x left, 1x right), switched via reverse light 1 x 15-pin connector at front, with connecting cable Country of Registration / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. ECE R 048, white on the sides and red at the rear Paintwork Chassis hot-dip galvanized incl. passivation, 15 years anti-corrosion warranty Drawbar black KTL-coated

Stanje: novo, številka stroja/vozila: 068983c41e44eb5660fa9100c, lastna masa: 6 kg, največja dovoljena obremenitev: 28 kg, skupna masa: 35 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 435/50 r19,5, Further Information Chassis, Fifth-Wheel, Logistics Fine-grained steel welded construction, with preload for slight neck area pretension, fifth wheel plate with replaceable 2" kingpin X-tra Long, with 15,030 mm internal length New type slightly inclined outer frame with Load-Lock profile for securing lashing straps 24 t twin-speed landing gear, operable from one side, with straight lower section, without compensating device Note: Free support foot external dimension or free rear swing radius approx. 1,930 mm Extending ladder at rear Lateral door retainers 2 wheel chocks with holder Side underrun protection, aluminium Prsdpfei Riwuox Ab Nsd Rear underrun protection, galvanized steel Quarter mudguards in front of the first axle and behind each axle Rear impact guard Axles + Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake System Dual-line compressed air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle working on last axle, maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS CAN-bus signal, for display in the driver’s cab, truck must be preconfigured accordingly; not installed (not a certified scale) Wheels and Tyres 435/50 R19.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side lighting Side yellow LED lighting linked with indicators, flashing Side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Floor Phenolic plywood, approx. 30 mm thick, on longitudinal subframes for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Front Wall / Front Corner Raves 2 pieces, 580 mm high, steel corner raves in high-volume design, release device for side curtain at bulkhead, crash blocker, inner steel rear impact guard at approx. 140 mm height Centre Stanchions 3 pairs of sliding stanchions moveable along full length, with quadruple pocketing and long lower pocket 3 pairs of stanchion positions Insert Slats 5 rows of wooden insert slats Rear Wall / Rear Corner Raves Rear corner raves, steel up to lower roof edge, fitting for curtain with round tube and curtain tension ratchet Double-winged tail doors, each with 2 internal locking bars Curtain Curtain with welded horizontal and vertical straps Tension closures made of stainless steel Roof Sliding roof, rear end-lift foldable, canopy can be slid from rear to front, L-roof beam for automotive industry, clear internal width between roof beams approx. 2,490 mm, curtain colour: white Roof non-elastic, minimal deflection of roof beam during loading and unloading EcoLift - hydraulically liftable roof by approx. 380 mm on both sides, gas strut-assisted 3 driving positions at the front: Internal height at front approx. 2,900mm / 2,950 mm / 3,000 mm, set to approx. 3,000 mm Optimized rain gutter at rear, upper end spar, above doors Operating Instructions Special permit required if total train length exceeds 16,500 mm. When assembling the truck and trailer combinations, ens

Stanje: rabljeno, številka stroja/vozila: 28be789c7675b811b702c6cb3, lastna masa: 6.000 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 26.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, velikost pnevmatike: 205 / 65 r 17,5, Further Information Fine-grained steel welded construction, fifth wheel plate with replaceable 2-inch kingpin. Reinforced pickup point for gallows-mount, equipped with sturdy wear plates all around; channel profile from flat steel beneath the outer frame. Outer frame slightly tapered with load-lock profile for securing lashing straps. Note: To attach straps in combination with sidewalls, the sidewalls must be open! 24-ton two-speed landing gear, one-sided operation, with straight lower section, without compensating slide. Wheel chocks with holders, aluminum side underrun protection, set inwards as far as technically possible; steel rear underrun protection for maximum ground clearance; quarter-shell fenders in front of and behind each axle; hook-in rail for aluminum ramps at the rear; plastic toolbox with shelf insert (width=620 mm/height=360 mm/depth=440 mm), lockable with padlock (padlock not included). Prsdpfx Abomp Ug Do Nod SAF drum brake axles, with axle stops; wheelbase 1,600 mm; air suspension with raise/lower valve. 205/65 R17.5, twin steel rims, factory silver finish. 2-line compressed air brake system, spring-loaded parking brake, two non-interchangeable coupling heads at the front, without connecting line; EBS (Electronic Braking System) with EBS socket at the front, no connection cable. Warning: The trailer must only be towed by towing vehicles that support proper ABS function! 24 volt, multi-chamber lights, integrated yellow side LED lighting in outer frame profile, set approx. 25 mm inwards, 10 per side. 2 white position lights at the front, protected; 2 white/red marker lights at the rear; additional LED work light at the rear, connected to reversing light. Two 7-pin and one 15-pin non-interchangeable sockets at the front, no connecting cables. Phenolic plywood flooring approx. 30 mm thick for high point load capacity, suitable for forklift axle loads up to max. 5,600 kg. Special flooring installation: testing of new profiles, no screws. In wheel arch area: steel/chequer plate overlay. Front bulkhead/corner posts made from 25 mm aluminum hollow profile, approx. 800 mm high; steel corner posts, heavy-duty version, with windows on both sides. Country of registration: Germany, with Dekra inspection and certificate (according to §13 EC – FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective tape in accordance with ECE R048, white on the sides and red at the rear.

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Prsdpfx Aoi Ri Rvjb Nsd Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Tie-down points on low loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin fail-safe connectors at the front, with connection cable, 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: 83732a53562459145277be051, lastna masa: 4.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Patented curved front end 24 t two-speed landing gear, single-side operation, with straight lower section, without compensating slide 2 wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holder, stone-repellent surface With anti-spray splash flaps on the last axle only 1 tarpaulin bar with bracket 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle as automatic lift axle, including forced lowering and start-up aid, activated by braking 3 times (start-up aid functions up to 30% axle overload and max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year rust-through warranty Brake system Pjdpfxei Ri Nbj Ab Njrd 2-line compressed air brake system, color-coded line layout for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure ABS functionality! With raise & lower valve Vehicle stability system Automatic tip lowering with shut-off valve Wheels and tires 385/65 R22.5, brand at the manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red track lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Aluminium box body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, fitted with bulk material-repellent top rail profile. Interior with ladder at front wall (not in combination with Cramaro). Shovel and broom holder on exterior of front wall. Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall as swing flap with double hinge, mounted externally with double hook lock. Rear wall with rubber seal. Note: Heat resistant up to max 170°C! Floor continuous 6 mm thick Standing platform with access, connection plate for air/electrics and brakes, with large clearance for optimal operability. Roll tarp can be placed on the right side (FR-right), with central locking on the left side (FR-left) Operating notes For transportation of salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent corrosion and material attack. The specified gross weight is technically possible; depending on the cargo, the total weight may not be achievable within the permissible axle, support, and saddle loads. (Poor driving and tracking behavior can result from incorrect load distribution) Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Chassis DB 7350 Nova grey 10 y

Stanje: novo, številka stroja/vozila: f80f2330e1318ef03bc20755e, lastna masa: 3.200 kg, največja dovoljena obremenitev: 35.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information: Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, only 2 longitudinal frame members as double-T beams for subsequent attachment of a front end gantry in the latest/current version, outer frame slightly inclined with load-lock profile for tie-down strap hooks (Note: to hook-in the straps in connection with side walls, the side boards must be opened!), 24-ton, 2-speed landing gear, single-sided operation, with straight lower section, without compensating slide, wheel chocks with bracket, folding aluminium side underrun protection, extendable galvanized steel rear underrun guard, half-shell mudguards delivered loose, not installed, with anti-spray splash guards behind each axle, 1 plastic water tank, approx. 30l capacity, installed front left. BPW disc brake axles with 430 mm disc diameter, axles/chassis laser-aligned to minimize tire and fuel consumption, air suspension, 1st axle automatic lift axle, also manually lowerable, operable via manual control on the vehicle. 2-line compressed air brake system with 1 standard central air tank, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting hose, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable, EBS 2S/2M, test port for brake cylinder pressure at the external EBS module. Note: This trailer may only be towed by tractors that guarantee the effectiveness of the ABS! With lift & lower valve, control unit + brakes integrated into the frame as with a tipper semi-trailer, mounted in front of the axles. Brake pad wear indicator for disc brakes via ABS/EBS lamp in the truck. 385/65 R22.5 Continental brand, steel rims, factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting as on tipper semi-trailer, 3000 mm width must be observed, 2 front white LED position lamps, supplied loose, 2 white/red lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at the front, without interconnecting cable. Germany, EC 2007/46 type approval for complete vehicle, 24/7 service hotline, prepared for double number plate holder (single line), 1 x plastic and 1 x stainless steel interchangeable holder. Warning sign according to ECE - 70, aluminium, loose, EBS, safe parking, without contour markings / reflective tape according to ECE R 048. Psdpfx Asi Riwqjb Nerd Frame: DB 7350 Nova Grey, landing legs: Black coated Available immediately!

Stanje: novo, številka stroja/vozila: e7fbe178b85a202cade7e95af, lastna masa: 5 kg, največja dovoljena obremenitev: 22 kg, skupna masa: 29 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis: Semi-Trailer for Freight Forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable king pin, two king pin positions. Outer frame slightly sloped with load-lock profile for attaching lashing straps. Note: When using lashing straps in conjunction with side boards, the side boards must be opened to attach the straps! 2 pairs of lashing rings recessed into the outer frame on the gooseneck, each rated at 5 tons 8 pairs of lashing rings recessed into the outer frame in the low bed, each rated at 5 tons 24-ton two-speed landing gear, single-sided operation, with straight lower section, without sliding compensation 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter shell mudguards in front of and behind the axle assembly 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished lockable door 2 pairs of stake pockets recessed into the outer frame on the gooseneck, internal dimensions 70 x 40 mm 6 pairs of stake pockets recessed into the outer frame in the low bed, internal dimensions 70 x 40 mm !!Internal width between stakes: 2,420 mm!! 3 lashing/stake rails in the low bed, recessed crosswise into the floor across the entire width up to the outer frame (max. usable internal width between external drop-in stakes approx. 2,170 mm), approx. 100 mm high. With 20 mm round bar rails, top and bottom, approx. 60 mm clearance between the round bars (top to bottom). Bottom finished with angle plate, half open to below. For lashing and setting stakes 80 x 80 mm. Quantity: Drop-in stakes B=80/T=50/L=1200 mm, hot-dip galvanized Quantity: Drop-in stakes B=80/T=80/L=1200 mm, hot-dip galvanized Note: Stake pockets / drop-in stakes are not intended as the sole means of load securing for long materials, pipes, etc. without lashing. Rear extension manual with hand crank, extendable approx. 1,500 mm, lockable every 500 mm, with support beam; load capacity at center of gravity: approx. 2,000 kg over entire width at 500 mm, 1,000 kg at 1,000 mm, 500 kg at 1,500 mm; includes extendable rear underrun guard with lighting. 2 pairs of drop-in stakes B=80/T=80/L=1200 mm, hot-dip galvanized Open storage compartment for drop-in stakes at the front wall or below the load area (for 10 drop-in stakes 80 x 50 x 1200 mm and 4 stakes 80 x 80 x 1200 mm) Axles & Suspension Prsdpfx Absi Ri Hvo Nod SAF drum brake axles Axles/chassis laser aligned, reduces tire wear and fuel consumption Last axle is steering, with automatic reverse lock via reverse light and additional manual lock on the vehicle via a hand button. Air suspension with raise & lower valve Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel twin rims, factory silver Braking System 2-line compressed air brake system Spring-actuated parking brake 2 foolproof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, no connection cable Attention: The trailer may only be towed by vehicles that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, for display in driver’s cab; truck must be properly equipped, no truck installation (not a calibrated scale) Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin sockets at front, without connecting cables 2 additional LED work lights at rear, switched via reverse light 1 LED rotating beacon with bracket, switch

Stanje: novo, številka stroja/vozila: a0a72d14f9b44bce47bc25ffb, konfiguracija osi: 1 os, velikost pnevmatike: 11,5/80-15,3 alliance, Further information 40 mm towing eye Support leg with wheel Tyres: 11.5/80-15.3 Alliance Without suspension Predpfx Abji Ri D Te Nod Distance from towing eye to centre of fifth wheel plate: 3,200 mm Tyre load capacity: 5,800 kg at 30 km/h + 5,150 kg at 40 km/h Without road approval, for internal use only!

Stanje: rabljeno, številka stroja/vozila: 9a9c8ebe1f7e791f4fc6f94e6, lastna masa: 2.620 kg, največja dovoljena obremenitev: 15.380 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2019, velikost pnevmatike: 385/65 r22,5, Leto izdelave: 2019, Further information: Fine-grained steel welded construction, front stop longitudinally adjustable and foldable, pair of guide rollers removable, front and rear, pair of guide rollers removable, additionally 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45, turntable with heavy-duty ball bearing ring, wheel chocks with holder. Side underrun protection made of aluminum, rear underrun protection made of steel, quarter-shell mudguards at the front and half-shell mudguards at the rear. 1 spare wheel holder for 1 single tire, with wheel fastening kit in basket design. Drawbar with certified 40 mm towing eye, drawbar height adjustable via spring. BPW disc brake axles, axles/chassis laser-measured to reduce tire wear and fuel consumption, air suspension. 2-line compressed air braking system. Colored line routing for easy maintenance. Air reservoir 208 liters. Spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, EBS by Wabco, electronic braking system with EBS plug at the front, including connection cable. (Attention: The towed vehicle may only be pulled by towing vehicles that ensure the effectiveness of the ABS!) With raise & lower valve, holding function in each raised/lowered position. 24 Volt, 4 x 3-chamber tail lights + 1 round reversing spotlight + 1 round rear fog light, lateral yellow LED lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front with connecting cable, 1 additional LED working light at the rear controlled via reverse light, 1 LED working light centrally at the front between the beams, facing rearward, controlled via reverse light. Country of registration: Germany, with Dekra approval and inspection report (according to §13 EG - FGV), prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Pedpei Riz Hofx Ab Nerd