Goldhofer Gradbeni Stroji Z Nizkim Nakladalnikom nakup rabljenega (119)

Stanje: rabljeno, prva registracija: 08/1998, skupna dolžina: 16.000 mm, skupna širina: 2.550 mm, Leto izdelave: 1998, GOLDHOFER STZ -TL 3 -33/80 3-osna polprikolica z upognjenim (labodjim vratom) SEMI, s 3 krmiljenimi osmi, z znižljivo ploščadjo in hidravličnimi rampami PRIKOLICA JE BILA PESPESKANA IN LAKIRANA!! • ABS • 3 x BPW ECO-Plus osi z zračnim vzmetenjem • 3 x krmiljene osi Podswpknwspfx Ab Njrd • Dvižno/spustno napravo • Hidravlične, dvodelne vzponske rampe • Hidravlično znižljiva ploščad • Razširljivo na 3 m širine • Opozorilne table • NATO vtikač za električno/hidravlično črpalko • Skupna dolžina: 16.000 mm • Lastna masa: 15.900 kg • Dovoljeno skupno maso: 48.000 kg (tehnično možno 48.000 kg) • Nosilnost: 32.100 kg • 4 x merilniki obremenitve osi • Dvojna pnevmatika: 235/75 R17,5 - Tehnični pregled in varnostni pregled: !! novo !! - Nemško vozilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Psdpfjxwgngjx Ab Nord Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: jeklo, velikost pnevmatike: 8.25 R 15, Leto izdelave: 1971, 3-osna nizkopodna prikolica, dostopna zadaj. Nakladalna površina pribl. 7.700 (5.500+2.200) x 2.500 mm, 12 priveznih obročev. Vzmetne rampe pribl. 2.500 x 600 mm, nastavljive po osi rampe. BPW osi, listnato vzmetenje z izravnalnim agregatom, gume 8.25R15, rezervno kolo z nosilcem. Višina nakladanja pribl. 920 mm. Vlečna zanka 50 mm, dvovodno zračno zaviranje, 24 V. Zelena barva. Dovoljena skupna masa 30.000 kg, nosilnost 24.300 kg. Prodaja v obstoječem stanju. = Nadaljnje informacije = Podpfx Ajxzaydob Nerd Dimenzija pnevmatik: 8.25 R 15 Vzmetenje: listnato Lastna teža: 24.300 kg Nosilnost: 5.700 kg Skupna dovoljena masa: 30.000 kg Država izdelave: DE Za več informacij se obrnite na Jan-Marc Schwickert.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 18.580 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 1.100 mm, skupna dolžina: 18.580 mm, skupna širina: 2.750 mm, skupna višina: 1.100 mm, vzmetenje: drugo, velikost pnevmatike: 245 / 70 R17.5, barva: oranžna, Leto izdelave: 2016, Farbe: Orange Nutzlast: 74.500 kg Hauptmerkmale Hersteller: Goldhofer Typ: STZ VP 6 (2+4) 245 mit Baggerbrücke Fahrgestellnummer: WG0VP0046G0037773 Baujahr: 2012 Gewichte/Ladekapazität Sattellast (King-Pin): 30.000 kg Achslast: 12.000 kg Gesamtachslast: 6 x 12.000 kg = 72.000 kg Gesamtgewicht (zGG): 102.000 kg Leergewicht: ca. 27.500 kg Zuladung: ca. 74.500 kg Achsen Achsenfabrikat: BPW Hydraulische Federung Alle Achsen als hydraulische Pendelachsen WABCO-Bremssystem mit EBS Bereifung: 245/70 R17.5 Abmessungen Länge: 18.585 mm Ladeflächenlänge: 14.325 mm Verlängerung: +3.750 mm Max. ausgezogene Länge: 22.335 mm Ladeflächenbreite: 2.750 mm Ladeflächenhöhe: 1.100 mm (+335 mm / -265 mm) Sattelhöhe: +/- 1.350 mm Zusätzliche Informationen Ausziehbar Hatz PowerPack Aggregat Hydraulikbedienung über Zugmaschine Zurringe Rungenaufnahmen Baggerbrücke mit abnehmbaren seitlichen Auflagen 1x Reserverad Heckstoßfänger mit Beleuchtung Sattelkupplung: 3,5" Zentralschmieranlage mit 2 BEKAMAX-Pumpen Überbreitenschilder = Weitere Informationen = Allgemeine Informationen Baujahr: 2016 Achskonfiguration Reifenmaß: 245/70 R17.5 Achsenfabrikat: BPW Vorderachse 1: Zwillingsbereifung, Liftachse, max. Achslast: 12.000 kg, gelenkt, Federung: hydraulisch Vorderachse 2: Zwillingsbereifung, Liftachse, max. Achslast: 12.000 kg, gelenkt, Federung: hydraulisch Hinterachse 1: Zwillingsbereifung, Liftachse, max. Achslast: 12.000 kg, gelenkt, Federung: hydraulisch Hinterachse 2: Zwillingsbereifung, Liftachse, max. Achslast: 12.000 kg, gelenkt, Federung: Blattfederung Hinterachse 3: Zwillingsbereifung, Liftachse, max. Achslast: 12.000 kg, gelenkt, Federung: hydraulisch Hinterachse 4: Zwillingsbereifung, Liftachse, max. Achslast: 12.000 kg, gelenkt, Federung: hydraulisch Gewichte Leergewicht: 27.500 kg Zuladung: 74.500 kg zGG: 102.000 kg Funktionalität Ausziehbarer Aufbau: Ja Zustand Prodpfxsw Tc S Is Ab Ned Technischer Zustand: sehr gut Optischer Zustand: sehr gut Schäden: keine Finanzielle Informationen Preis: auf Anfrage Weitere Informationen Für weitere Details kontaktieren Sie bitte Stefan Schaapveld.

Stanje: rabljeno, skupna dolžina: 11.220 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, barva: zelen, Leto izdelave: 2023, Oprema: ABS, Število prevoženih kilometrov: 6.618 km Lastna teža: 8.900 kg Nosilnost: 15.100 kg Pjdpfjwhmbdex Ab Nsrd Skupna dovoljena masa: 24.000 kg

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: Psdji Ai E Ropfx Ab Nsrd - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2014, dolžina tovornega prostora: 6.650 mm, širina tovornega prostora: 2.760 mm, skupna dolžina: 16.200 mm, skupna širina: 2.780 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70R17.5, barva: oranžna, Leto izdelave: 2014, = Additional Options and Accessories = - Hydraulics - Material: steel - Floor material - Safety rings = Further Information = General information Cab type: 9999 Axle configuration Tyre size: 245/70R17.5 Axle brand: BPW Brakes: drum brakes Suspension: hydraulic suspension Axle 1: Steering; Tyre tread left: 60%; Tyre tread right: 60% Axle 2: Steering; Tyre tread left: 60%; Tyre tread right: 60% Axle 3: Steering; Tyre tread left: 60%; Tyre tread right: 60% Axle 4: Steering; Tyre tread left: 60%; Tyre tread right: 60% Axle 5: Steering; Tyre tread left: 60%; Tyre tread right: 60% Psdpfx Aewnrp Tjb Nord Axle 6: Steering; Tyre tread left: 60%; Tyre tread right: 60% Weights Gross vehicle weight: 94,750 kg = Company Information = Would you like more information about this vehicle? We recommend taking a look at BAS World. There you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • Support and services from BAS World Would you like to know more? Visit BAS World online! España (ES) We speak 17 languages, so we can always help you in your own language. Please do not hesitate to contact us directly. Our Spanish colleague will be happy to assist you! Deutschland (DE) We speak 17 languages, so we can always help you in your own language. Do not hesitate to contact us directly. Our German colleague will be happy to help you! France (FR) We speak 17 languages, so we can always assist you in your own language. Please feel free to contact us directly. Our French colleague will be happy to help you! Portugal (PT) We speak 17 languages, so we can always assist you in your own language. Please do not hesitate to contact us directly. Our Portuguese colleague will be happy to help you! Italy (IT) We speak 17 languages, so we can always assist you in your own language. Please feel free to contact us directly. Our Italian colleague will be happy to help you!

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Psdpfxexcdf He Ab Nsrd Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, lastna masa: 1.950 kg, največja dovoljena obremenitev: 8.050 kg, skupna masa: 10.000 kg, konfiguracija osi: 1 os, prva registracija: 01/1998, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, prostornina tovornega prostora: 9 m³, skupna dolžina: 3.000 mm, vzmetenje: jeklo, velikost pnevmatike: 385/65 22,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1998, velikost sprednje pnevmatike: 385/65 22,5, velikost zadnje pnevmatike: 385/65 22,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 40323 Goldhofer, ballast trailer * Year of manufacture: 1998 * ABS (Anti-lock Braking System) * Air connection coupling head (red & yellow) * Connector plugs: 2x 7-pin * Suspension: leaf springs * Gross vehicle weight: 10,000 kg * Unladen weight: 1,950 kg * Payload: 8,050 kg * Permissible total weight: 10,000 kg Podpfx Aoxv Rtwob Nerd * Axle manufacturer: SAF * Tyre condition 1st axle: 50% / 50% – Tyre size: 385/65 R22.5 * Tyre size (all axles): 385/65 R22.5 * Internal dimensions: L = 3,000 mm, W = 2,500 mm, H = 1,300 mm * Internal volume*: 10 m³ * Pallet spaces: * Superstructure by Obermaier TFB 100 Disclaimer: Subject to alterations, prior sale, and errors excepted. You will find further photos and videos on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Arranging all (export) documentation * Ordering export plates / customs plates * Vehicle preparation: new tarpaulins, lettering, spray painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer/delivery of commercial vehicles Ask our trained specialists – we will be happy to advise you.

Stanje: zelo dobro (rabljeno), skupna širina: 3.000 mm, barva: oranžna, Leto izdelave: 2000, Farbe: Orange 01 x Gebrauchtes Gooseneck S-THP + PPU Fahrgestellnummer / 24739-20 Baujahr/ 2000 01 x Gebrauchtes 2-Achs-Modul THP/LTSO 2 Fahrgestellnummer / 21972 Baujahr / 1995 Breite / 3.000 mm Achslast / 26.000 kg pro Achslinie Bereifung / 205/65 R 17,5 01 x Gebrauchtes 2-Achs-Modul THP/LTSO 2 Fahrgestellnummer / 21972 Baujahr / 1995 Breite / 3.000 mm Achslast / 26.000 kg pro Achslinie Bereifung / 205/65 R 17,5 01 x Gebrauchtes 4-Achs-Modul THP/LTSO 4 Fahrgestellnummer / 21973 Baujahr / 1995 Breite / 3.000 mm Achslast / 26.000 kg pro Achslinie Bereifung / 205/65 R 17,5 01 x Gebrauchtes 4-Achs-Modul THP/LTSO 4 Fahrgestellnummer / 21974 Baujahr / 1995 Breite / 3.000 mm Achslast / 26.000 kg pro Achslinie Bereifung / 205/65 R 17,5 01 x Gebrauchtes 4-Achs-Modul THP/LTSO 4 Fahrgestellnummer / WGOTHP045W0024047 Baujahr / 1998 Prodpfx Absu Abh Ts Ned Breite / 3.000 mm Achslast / 26.000 kg Bereifung / 205/65 R 17,5 = Weitere Informationen = Baujahr: 2000 Technischer Zustand: sehr gut Optischer Zustand: sehr gut Preis: Auf Anfrage Bitte wenden Sie sich an Stefan Schaapveld für weitere Informationen.

Stanje: rabljeno, barva: modra, Leto izdelave: 2005, Goldhofer S-THP 15 Schenkellast 1: S-THP/ET. Sattellast: 30.000 kg. Betrieb über Lkw-Hydraulik + Hatz-Motor. Schenkellast 2: S-THP. Sattellast: 35.000 kg. Betrieb über Lkw-Hydraulik + Hatz-Motor. 3 Achsen: THP/ET3. Baujahr: 1993. 12-t-BPW-Achsen. Eigengewicht: 7.900 kg. Max. Gesamtgewicht: 36.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 60%. Maße Ladefläche: L: 4.150 mm B: 2.750 mm H: 1.100 mm 3 Achsen: THP/ET3. Baujahr: 1996. 12-t-BPW-Achsen. Eigengewicht: 7.900 kg. Max. Gesamtgewicht: 36.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 60%. Maße Ladefläche: L: 4.150 mm B: 2.750 mm H: 1.100 mm 3 Achsen: THP/ET3. Baujahr: 2005. 12-t-BPW-Achsen. Eigengewicht: 8.000 kg. Max. Gesamtgewicht: 36.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 60%. Maße Ladefläche: L: 4.150 mm B: 2.750 mm H: 1.100 mm 2 Achsen: THP/ET2. Baujahr: 2005. 12-t-BPW-Achsen. Eigengewicht: 5.400 kg. Max. Gesamtgewicht: 24.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 70%. Maße Ladefläche: L: 2.800 mm B: 2.750 mm H: 1.100 mm 4 Achsen: THP/ET4. Baujahr: 2005. 12-t-BPW-Achsen. Eigengewicht: 10.900 kg. Max. Gesamtgewicht: 48.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 60%. Pjdpfx Aoxwpdkjb Nord Maße Ladefläche: L: 5.550 mm B: 2.750 mm H: 1.100 mm Zusatzboden: 4 Punkt Stützen: Maße Ladefläche: L: 3.000 mm B: 2.750 mm H: 1.100 mm Gesamtlänge der Ladefläche: 23,8 Meter! Deutscher Auflieger! ID NR: 443 Die Allgemeinen Geschäftsbedingungen (AGB) der Firma Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, alle mit Heinhuis geschlossenen Verträge sowie die diesen vorausgehenden Verhandlungen. Mit jeder Form der Kontaktaufnahme akzeptieren Sie die Geltung der AGB und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2005 = Firmeninformation = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, številka stroja/vozila: d25bedc76ae946ce00df59d5c, lastna masa: 11.600 kg, največja dovoljena obremenitev: 35.900 kg, skupna masa: 47.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/1982, velikost pnevmatike: 9,5 r17,5 zwilling, Further information: 1st axle rigid, 2nd and 3rd axles hydraulically force-steered with gooseneck steering wedge, 1 pair of hydraulic support legs incl. hand pump for emergency operation, leaf suspension, 6 storage compartments, full steel chequer plate flooring, air: red-yellow + electrics: 1x 7-pin connection Gooseneck length approx.: 4,380 mm Low-bed length approx.: 11,300 mm Pedpfx Aoi Riyzeb Nord Fifth-wheel height approx.: 1,200 mm

Stanje: dober (rabljeno), prva registracija: 03/2011, Leto izdelave: 2011, Unladen weight: 34,500 kg Body manufacturer: GOLDHOFER STHP/XLE 8 (3+5) lowloader Extendable body: Yes Technical condition: good Prjdpsvfnyqjfx Ab Njd Visual condition: good

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Prsdpfsxcdf Tox Ab Ned Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 12/1992, dolžina tovornega prostora: 18.000 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 300 mm, Leto izdelave: 1992, Oprema: ABS, = Additional Options and Equipment = - Electronic Braking System (EBS) - Centralized Lubrication System = Notes = Axle Manufacturer: Dolle Goldhofer Lowbed Trailer STZ-VH4-50/80 Goldhofer Heavy Duty Lowbed STZ-VH4-50/80 Air Suspension Gooseneck length: 3.50 m Lowbed length: 8.90 m Remaining length: 5.65 m Gross weight: 71,000 kg | Payload: 50,600 kg | Unladen weight: 20,400 kg Stock ID: 455 We look forward to advising you, signing the contract, or arranging vehicle pickup at our dealership. Please schedule an appointment. If visiting the dealership isn't possible for you, we offer full transaction processing via phone, email, WhatsApp, or fax. On request, we deliver your new vehicle straight to your door. That means you get the best price, maximum security, and full convenience during collection and handover. We are happy to accept your used vehicle as a trade-in. We offer the option of a digital vehicle valuation based on your photos, even without a dealership visit. Our specialized purchasing team guarantees you the highest possible offer. Upon request, we deliver your new pre-owned vehicle nationwide to your door and take your old vehicle in return. Financing and leasing options available. Immediate approval and settlement of existing loans possible. Prsdpfxext Tyho Ab Njd Your specialized partner for passenger cars, transporters, commercial vehicles, and construction machinery. ITC GmbH & Co. KG Siemensstr. 7 32312 Lübbecke (Industrial Area) Over 400 vehicles in stock at all times. All details in ads, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typographical or data transmission errors. Listed features should be checked separately if necessary. The offer does not include a new roadworthiness inspection (TÜV); we are happy to provide an offer from our partner workshop upon request. Subject to error and prior sale. = Further Information = Unladen weight: 20,400 kg Payload: 50,600 kg Gross vehicle weight (GVW): 71,000 kg Sale price: €37,000, US$42,750

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 18.520 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 450 mm, skupna dolžina: 18.520 mm, skupna širina: 2.750 mm, skupna višina: 450 mm, vzmetenje: hidravlika, velikost pnevmatike: 245 / 70 R17.5 | Load index 146/146F, barva: bela, Leto izdelave: 2014, Farbe: Weiß Radstand: 136 cm Nutzlast: 53.800 kg Ladebodenhöhe: 45 cm ausziehbar, gebremst Predpfxjxyh I Ts Ab Njd Hersteller: Goldhofer Typ: STZ-VP 3-55/80A Fahrgestellnummer (VIN): WG0STZV39E0036631 Baujahr: 2014 Gewichte: Sattellast: 35.000 kg Achslast (je Achse): 12.000 kg Gesamte Achslast: 36.000 kg zul. Gesamtgewicht: 71.000 kg Leergewicht: 17.200 kg Zuladung: 53.800 kg Abmessungen: Länge: 15.520 mm + 3.000 mm Verlängerung Ladeflächenlänge: 6.300 mm + 3.000 mm Ladeflächenbreite: 2.750 mm Ladeflächenhöhe: 450 mm Bogie-Höhe: 1.100 mm (+385 mm / -215 mm) Sattelhöhe: 1.390 mm Achsen: BPW Eco Pendellachse Alle Achsen hydraulisch gelenkt Bereifung: 245/70R17.5 ABS / EBS Ausstattung: 1x ausziehbar Hydraulikanlage angetrieben über LKW-Nebenabtrieb (PTO) Abnehmbarer Schwanenhals mit Front-Auffahrrampen Baggerstielmulde Funk- und Kabel-Fernbedienung Zurrösen Rungenaufnahmen Ladeboden aus Holz Edelstahl-Werkzeugkasten 2x Ersatzrad mit Halterung Arbeitsleuchten Heckstoßstange mit Beleuchtung Sattelkupplung 3,5'' Zentralschmieranlage Beka-Max = Weitere Informationen = Allgemeine Informationen Baujahr: 2014 Achskonfiguration Reifenmaß: 245/70 R17.5 | Lastindex 146/146F Achsenmarke: BPW hydraulische Pendelachsen Federung: hydraulisch Hinterachse 1: Doppelbereift, max. Achslast 12.000 kg, gelenkt Hinterachse 2: Doppelbereift, max. Achslast 12.000 kg, gelenkt Hinterachse 3: Doppelbereift, max. Achslast 12.000 kg, gelenkt Gewichte Leergewicht: 17.200 kg Zuladung: 53.800 kg zul. Gesamtgewicht: 71.000 kg Funktionalität Ausziehbarer Aufbau: Ja Zustand Technischer Zustand: gut Optischer Zustand: gut Finanzielle Informationen Preis: auf Anfrage Weitere Informationen Bitte wenden Sie sich an Stefan Schaapveld für weitere Auskünfte.

Stanje: rabljeno, barva: modra, Leto izdelave: 2005, Goldhofer S-THP 15 Schenkellast 1: S-THP/ET. Sattellast: 30.000 kg. Betrieb über Lkw-Hydraulik + Hatz-Motor. Schenkellast 2: S-THP. Sattellast: 35.000 kg. Betrieb über Lkw-Hydraulik + Hatz-Motor. 3 Achsen: THP/ET3. Baujahr: 1993. 12-t-BPW-Achsen. Eigengewicht: 7.900 kg. Max. Gesamtgewicht: 36.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 60%. Maße Ladefläche: L: 4.150 mm B: 2.750 mm H: 1.100 mm 3 Achsen: THP/ET3. Baujahr: 1996. 12-t-BPW-Achsen. Eigengewicht: 7.900 kg. Max. Gesamtgewicht: 36.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 60%. Maße Ladefläche: L: 4.150 mm B: 2.750 mm H: 1.100 mm 3 Achsen: THP/ET3. Baujahr: 2005. 12-t-BPW-Achsen. Eigengewicht: 8.000 kg. Max. Gesamtgewicht: 36.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 60%. Maße Ladefläche: L: 4.150 mm Prsdpfx Abjxwpb Aj Nsd B: 2.750 mm H: 1.100 mm 2 Achsen: THP/ET2. Baujahr: 2005. 12-t-BPW-Achsen. Eigengewicht: 5.400 kg. Max. Gesamtgewicht: 24.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 70%. Maße Ladefläche: L: 2.800 mm B: 2.750 mm H: 1.100 mm 4 Achsen: THP/ET4. Baujahr: 2005. 12-t-BPW-Achsen. Eigengewicht: 10.900 kg. Max. Gesamtgewicht: 48.000 kg. Hydraulische Federung. Bereifung: 285/70R19,5, 60%. Maße Ladefläche: L: 5.550 mm B: 2.750 mm H: 1.100 mm Zusatzboden: 4 Punkt Stützen: Maße Ladefläche: L: 3.000 mm B: 2.750 mm H: 1.100 mm Gesamtlänge der Ladefläche: 23,8 Meter! Deutscher Auflieger! ID NR: 443 Die Allgemeinen Geschäftsbedingungen (AGB) der Firma Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, alle mit Heinhuis geschlossenen Verträge sowie die diesen vorausgehenden Verhandlungen. Mit jeder Form der Kontaktaufnahme akzeptieren Sie die Geltung der AGB und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2005 = Firmeninformation = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, prva registracija: 06/1984, skupna masa: 39.500 kg, lastna masa: 13.600 kg, barva: drugo, vrsta prenosa: drugo, emisijski razred: noben, največja dovoljena obremenitev: 25.900 kg, naslednji pregled (TÜV): 05/2022, vzmetenje: drugo, velikost pnevmatike: 12.00-20/18PR, velikost sprednje pnevmatike: 12.00-20/18PR, velikost zadnje pnevmatike: 12.00-20/18PR, voznikova kabina: drugo,

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Podpjxcdgqefx Ab Nord Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 16.100 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.510 mm, skupna dolžina: 16.100 mm, skupna širina: 2.540 mm, skupna višina: 1.510 mm, vzmetenje: hidravlika, velikost pnevmatike: 305 / 70 R22.5, barva: rumena, Leto izdelave: 2012, Farbe: Gelb Nutzlast: 76.800 kg Ausziehbar Hauptmerkmale Hersteller: Goldhofer Typ: SPZ DH6 84-80A Ballastauflieger Fahrgestellnummer: WG0SPZD6D80030287 Baujahr: 2012 Gewichte / Ladefähigkeit Sattellast: 24.000 kg Achslast: 12.000 kg Gesamtachslast: 6 x 12.000 kg = 72.000 kg zul. Gesamtgewicht (zGG): 96.000 kg Leergewicht: 19.200 kg Zuladung: 76.800 kg Achsen Achsenfabrikat: BPW Hydraulische Federung 1. Achse liftbar WABCO Bremssystem mit EBS Bereifung: 305/70 R22.5 Abmessungen Länge: 16.100 mm Ausziehbar um: +10.050 mm Maximal ausgefahrene Länge: 26.150 mm Ladeflächenbreite: 2.540 mm Höhe: 1.510 mm (+/- 150 mm) Sattelhöhe: +/- 1.275 mm Weitere Ausstattung NATO-Steckdose Zurrösen Rungenhalter + Rungen Ladeboden aus Holz JOST mechanisches Stützbein Elektrohydraulische Pumpe für Aufliegerfunktionen Heckstoßstange mit Beleuchtung Sattelkupplung 3,5'' Zentralschmierung Werkzeugkasten = Weitere Informationen = Allgemeine Informationen Baujahr: 2012 Achskonfiguration Reifenmaß: 305 / 70 R22.5 Achsenmarke: BPW Federung: Hydraulisch Hinterachse 1: Doppelbereift, Liftachse, max. Achslast: 12.000 kg Hinterachse 2: Doppelbereift, max. Achslast: 12.000 kg Hinterachse 3: Doppelbereift, max. Achslast: 12.000 kg Hinterachse 4: Doppelbereift, max. Achslast: 12.000 kg Hinterachse 5: Doppelbereift, max. Achslast: 12.000 kg Hinterachse 6: Doppelbereift, max. Achslast: 12.000 kg Gewichte Leergewicht: 19.200 kg Zuladung: 76.800 kg zul. Gesamtgewicht: 96.000 kg Pjdoxx Uggjpfx Ab Nsrd Funktionalität Ausziehbarer Aufbau: Ja Zustand Technischer Zustand: gut Optischer Zustand: gut Finanzielle Informationen Preis: Auf Anfrage Weitere Informationen Bitte wenden Sie sich an Stefan Schaapveld für weitere Auskünfte.

Stanje: rabljeno, Leto izdelave: 2019, Goldhofer MPA-V3C (245A). Baujahr: 2019. 12-Tonnen BPW-Achsen. Eigengewicht: 18.400–19.000 kg. Zul. Gesamtgewicht: 64.000 kg. Sattellast: 28.000 kg. Hydraulik des Trailers kompatibel mit NATO-Anschluss. Werkzeugkasten + Aluminium-Bordwände am Schwanenhals. 3 herausnehmbare Bodenbretter. Hydraulisch abnehmbarer Schwanenhals. 4,8 Meter ausziehbar. Hydraulische Federung. Baggerbrücke: 4600 x 800 mm. Funkfernbedienung. Zentralschmieranlage. Abmessungen: Schwanenhals: Länge: 3.700 mm Breite: 2.550 mm Höhe: 1.750 mm Sattelhöhe: 1.400 mm Ladefläche: Länge: 7.000 mm Breite: 2.750 mm Höhe: 400 mm Bodenstärke: 220 mm Heck: Länge: 4.600 mm Breite: 2.750 mm Höhe: 900 mm Reifen: 245/70 R17,5 70 % Profil Deutscher Auflieger! ID-Nr.: 662. Die Allgemeinen Geschäftsbedingungen der Heinhuis finden auf alle Inserate, Angebote und Offerten von Heinhuis sowie auf sämtliche mit Heinhuis geschlossenen Verträge und die diesen vorausgehenden Verhandlungen Anwendung. Mit jeder Form der Antwort akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2019 Leergewicht: 18.400 kg Zuladung: 45.600 kg zulässiges Gesamtgewicht: 64.000 kg Ausziehbarer Aufbau: Ja Psdpfjxvzlqox Ab Nerd = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 21.200 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 1.240 mm, skupna dolžina: 21.200 mm, skupna širina: 2.750 mm, skupna višina: 1.240 mm, vzmetenje: hidravlika, velikost pnevmatike: 285 / 70 R19.5 (150/148J), barva: modra, Leto izdelave: 2012, Farbe: Blau Nutzlast: 110.550 kg Ausziehbar Hauptmerkmale Hersteller: Goldhofer Typ: THP / XLE 8 (3+5) Tiefbettauflieger Fahrgestellnummer: WG0THPX57B0030736 VIN Schwanenhals: WG0SH0005B3030736 VIN XLE 3: WG0XLE034B0035242 VIN XLE 5: WG0THPX57B0030736 Baujahr: 2012 Gewicht/Tragfähigkeit Sattellast: 27.000 kg Achslast: 14.000 kg Gesamte Achslast: 8 x 14.000 kg = 112.000 kg Zulässiges Gesamtgewicht (zGG): 139.000 kg Leergewicht: 28.450 kg Zuladung: 110.550 kg Achsen BPW Pendelachsen Achsabstand: 1360 mm / 1400 mm EBS/ABS Bereifung: 285 / 70 R19.5 (150/148J) Hydraulische Lenkung und Federung Funkfernbedienung Abmessungen Gesamtlänge: 21.200 mm Ladeflächenlänge: 6.000 mm Ladeflächenauszug: 8.500 mm Maximale Ladeflächenlänge: 14.500 mm Ladeflächendicke: 450 mm Ladeflächenfreiheit: 200 mm Ladeflächenbreite: 2.750 mm / 3.250 mm Bogie Breite: 2.750 mm Bogie Höhe: 1.240 (+/- 300) Baggerstielmulde: 700 mm Zusätzliche Informationen Hydraulikbetrieb über LKW-Nebenantrieb (PTO) Sattelkupplung 3,5” Zentralschmierung Steuerung per Fernbedienung Abnehmbarer Schwanenhals Hydraulische Schnellkupplungen Warntafeln für Überbreite Arbeitsleuchten Oranges Warnlicht Auffahrrampen Zusatzplatten für Verlängerung der Ladefläche Allgemeine Informationen Baujahr: 2012 Podpjxx Sv Esfx Ab Njrd Achskonfiguration Reifenmaß: 285 / 70 R19.5 (150/148J) Achsenmarke: BPW Federung: Hydraulisch Mittenachse 1: Zwillingsbereifung; Liftachse; Max. Achslast: 14 t; gelenkt Mittenachse 2: Zwillingsbereifung; Liftachse; Max. Achslast: 14 t; gelenkt Mittenachse 3: Zwillingsbereifung; Liftachse; Max. Achslast: 14 t; gelenkt Hinterachse 1: Zwillingsbereifung; Liftachse; Max. Achslast: 14 t; gelenkt Hinterachse 2: Zwillingsbereifung; Liftachse; Max. Achslast: 14 t; gelenkt Hinterachse 3: Zwillingsbereifung; Liftachse; Max. Achslast: 14 t; gelenkt Hinterachse 4: Zwillingsbereifung; Liftachse; Max. Achslast: 14 t; gelenkt Hinterachse 5: Zwillingsbereifung; Liftachse; Max. Achslast: 14 t; gelenkt Gewichte Leergewicht: 28.450 kg Zuladung: 110.550 kg Gesamtgewicht: 139.000 kg Zustand Technischer Zustand: gut Optischer Zustand: gut Preis Preis: auf Anfrage Weitere Informationen Bitte kontaktieren Sie Stefan Schaapveld für weitere Details.

Stanje: rabljeno, barva: rumena, Leto izdelave: 2008, Goldhofer STZ-VL3-36/80A Baujahr: 2008 Achsen: 10-11,2 t BPW Max. Gesamtgewicht: 48.000-51.600 kg Sattellast: 18.000 kg Hydraulisch abnehmbarer Schwanenhals Alu-Bordwände + Werkzeugkiste auf dem Schwanenhals Verlängerungen: 2 + 3 Meter Ausziehbar Luftfederung Zentralschmieranlage Nachlaufgelenkte Achsen Baggerbrücke 3 herausnehmbare Bodenbleche Hydraulikanlage arbeitet über Fahrzeughydraulik Abmessungen: Schwanenhals: Länge: 3.500 mm Breite: 2.470 mm Höhe: 1.650 mm Sattelhöhe: 1.300 mm Ladeboden: Länge: 8.000 mm Breite: 2.550 mm Höhe: ca. 500 mm Bodendicke: 220 mm Heckteil: Länge: 4.100 mm Breite: 2.550 mm Höhe: 1.000 mm Funkfernsteuerung Bereifung: 245/70R17,5, Profil: 70 % ID-Nr.: 686 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote, Kostenvoranschläge, Verträge und die ihnen vorausgehenden Verhandlungen. Durch jegliche Form der Reaktion akzeptieren Sie die Gültigkeit der AGB der Firma Heinhuis und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2008 zulässiges Gesamtgewicht: 51.600 kg Predpfx Aoxvypzsb Nsd ausziehbarer Aufbau: ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, skupna dolžina: 15.700 mm, skupna širina: 2.750 mm, skupna višina: 1.290 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: oranžna, Leto izdelave: 2010, Colour: Orange Loading capacity: 40,600 kg Loading deck height: 54 cm Extendable Braked Main Features Manufacturer: Goldhofer Model: STZ VKL3 34/80 A Chassis number: WG0STZV3590030501 Year of manufacture: 2010 Weights / Loading Capacity Kingpin load: 24,000 kg Axle load: 11,200 kg Total axle load: 33,600 kg Prjdjuu Hifspfx Ab Ned Gross vehicle weight (GVW): 57,600 kg Unladen weight: 17,000 kg Payload: 40,600 kg Axles Axle make: BPW ECO Air suspension All axles with hydraulic steering High/low valve AGS / ALB / ABS Tyres: 245/70 R17.5, twin mounted Load index: 143/141G Dimensions Total length: 15,700 mm – 26,000 mm Loading floor length: 6,600 mm Extension: 4,300 mm Telescopic beams: 6,000 mm Max. loading floor length: 16,900 mm Loading floor width: 2,750 mm Beam thickness: 380 mm Kingpin height: 1,295 mm Additional Information Operated via truck hydraulics Lashing rings Hydraulically operated gooseneck Detachable gooseneck Marker boards for oversize loads Rear underrun with integrated lights Kingpin 2.0" Central lubrication Removable floor sections 4x extension crossbeams Toolbox on gooseneck = Further information = General Information Year of manufacture: 2010 Axle Configuration Tyre size: 245/70R17.5 Axle brand: BPW ECO Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 11,200 kg; Steered Rear axle 2: Twin tyres; Max. axle load: 11,200 kg; Steered Rear axle 3: Twin tyres; Max. axle load: 11,200 kg; Steered Weights Unladen weight: 17,000 kg Payload: 40,600 kg Gross vehicle weight (GVW): 57,600 kg Functional Loading platform height: 55 cm Extendable body: Yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Stanje: zelo dobro (rabljeno), skupna širina: 3.000 mm, barva: zelen, Leto izdelave: 2023, Farbe: Grün Ausziehbar Gebremst Einheiten: 1x Goldhofer THP / ADD 2.0 6 / 12×08 S 1x Goldhofer PPU / ADD – 530 / 3000 1x Goldhofer THP SL 6 SPLIT 1x Goldhofer THP SL 2 01x Goldhofer THP / ADD 2.0 6 – 12 x 08 s Baujahr: 2023 Fahrgestellnummer: WG0THPA68N0062326 Nur wenige Testkilometer! (ca. 7 km) Achslast: 36 t. pro Achsreihe Lenkwinkel: 55° in jeder Federstufe BPW-Achsen Michelin-Reifen / 215 / 75 R 17,5 EBS-Bremssystem Hydro-mechanische Lenkung Zentrale Schmierstelle 01x Goldhofer THP SL 2-Achsmodul Baujahr: 2023 Fahrgestellnummer: WG0THPS26N0042340 Nur wenige Testkilometer! Achslast: 45 t. pro Achsreihe Lenkwinkel: 55° BPW-Achsen Michelin-Reifen Hydro-mechanische Lenkung Zentrale Schmierstelle 01x Goldhofer THP SL 6 Split Baujahr: 2023 Fahrgestellnummer: WG0THPS64N0042341 Nur wenige Testkilometer! Achslast: 45 t. pro Achsreihe Lenkwinkel: 55° BPW-Achsen Michelin-Reifen / 215 / 75 R 17,5 EBS-Bremssystem Hydro-mechanische Lenkung Pedpov I A Syjfx Ab Njrd Zentrale Schmierstelle 01x Goldhofer PowerPack Unit/ ADD – 530 / 3000 Baujahr: 2023 Fahrgestellnummer: 62327-00 Deutz 6-Zylinder-Dieselmotor 390 kW / 530 PS Betriebsstunden: nur 32 Stunden! Abgasnorm: EU Stage 5 Funkfernsteuerung = Weitere Informationen = Baujahr: 2023 Technischer Zustand: sehr gut Optischer Zustand: sehr gut Preis: auf Anfrage Bitte wenden Sie sich an Stefan Schaapveld für weitere Informationen.