Müller-Mitteltal Polpriklopniki nakup rabljenega (241)

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (giving a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrical System / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (operated via reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages front and rear * Landing gear at the front * External folding supports at rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side impact protection * Rear underrun protection * Plastic quarter mudguards Cedpfx Aev D Tbdshujgn ----Platform: * 400 mm high bolted front wall * 50 mm softwood floor, * 2 pairs container locks (extendable for 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this is not DIN compliant) with a total outside width of 3,000 mm ----Load securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - 5 x 3 t UVV lashing rings fitted on each side - * In the corners at front and rear, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wood floor, and at rear in the end crossmember) * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * 1 pair aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t / pair) suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment under the platform integrated in the chassis ----Painting: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear and flange towing eye painted in a shade of black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 09/2026

Stanje: rabljeno, največja dovoljena obremenitev: 8.700 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 08/2014, Leto izdelave: 2014, Oprema: ABS, Internal vehicle no.: 001713 Location: Jaweed GmbH in Ober Mörlen (ZIP 61239), Hasselhecker Straße 30 * Tel.: Technical Data Sheet: ---- * Flatbed Trailer * Manufacturer: Müller-Mitteltal * Model: KA-TA-R11,9 * Year of manufacture: 08/2014 Cedpjx T I E Uefx Ahusgn * Number of axles: 2 * Length: 7,150 mm * Width: 2,550 mm * Empty weight: 3,200 kg * Gross vehicle weight rating: 11,900 kg * Payload: 8,700 kg * Landing gear: Jost * Spare wheel included * Tires: 235/75R17.5 143J ---- * Our machine inventory is updated regularly and always available on our website. * We offer more than 200 units for sale at any time. * Our location is 30 km north of Frankfurt/Main Airport. * We specialize in international transport and worldwide shipping. * We assume no liability for printing or typographical errors. Our Services: * Export declarations * Customs declarations * Temporary (yellow) license plates * Transit (red) customs license plates * Purchase of your used construction machinery or commercial vehicle * Financing assistance available * Complete transport solutions Vehicle and machine inspections: * Monday to Friday, from 08:00 to 16:30 * Saturdays by appointment only * Of course, you can also reach us by phone or WhatsApp with any questions ---- Jaweed GmbH Hasselhecker Straße 30 D-61239 Ober Mörlen Tel.: Mobile: This offer is non-binding and subject to prior sale. Sales are always based on our Terms and Conditions. Input errors, mistakes, and intermediate sale reserved. The information provided in adverts (including online listings), price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability for typographical or transmission errors. Listed equipment must be verified separately where necessary. No liability is accepted for concealed defects or previously unlisted damage. Any remaining risk after vehicle disassembly. All details in the advertisements are non-binding and provided without guarantee. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of the term. ----.

Stanje: rabljeno, lastna masa: 4.500 kg, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2015, naslednji pregled (TÜV): 07/2025, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.000 mm, barva: modra, Leto izdelave: 2015, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German trailer * Condition as shown in photos * Müller-Mitteltal three-way tipper, model KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost landing gear * Payload: 13,500 kg If a new TÜV inspection is required, we are happy to offer this through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods, to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. Cjdpfx Aewz H Nbohusgn All details are without guarantee. We do not assume liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ---Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ---Axles: * 2 x 7 t Gigant axles ---Suspension: * Parabolic springs with equalizing aggregate ---Drawbar / Flange draw eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ---Electrics / Lighting: Cgodpfxsrwc R Ro Ahuon * Tire pressure monitoring with display option in the truck via EBS signal – no vehicle-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ---General Attachments: * Support winch front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm front right external on the front wall * Side underrun protection * Plastic quarter mudguards ---Low Loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for subsequent installation of container locks * 400 mm bolted smooth sheet metal bulkhead * Bolted rear stakes * Dropsides with spring balancer ---Load Securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * One 6.3 t lashing ring at each front and rear corner * Various drilled holes in the front and rear crossmember for 1.2 t lashing options ---Ramps: * One-piece hydraulic grate loading ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Hydraulic flow divider in the trailer (with hydraulic pump capacity in the truck from over 40 l/min up to max. 140 l/min) ---Paintwork: * Chassis, drawbar, front wall, mechanical drop supports and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange draw eye painted in a shade of black * Dropside paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color available for an additional charge ---Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ---Delivery time: * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) Cgodpfx Ajl Tlhrshuon * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: Cgedpfx Ahol Th Eyouon * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on towing eye ----General attachments: * Jost landing gear at the front * Side underrun protection * Foldable A-panel at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions * Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear ----Loading edge: * Unloaded loading edge approx. 710 mm ----Load securing: * 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * The axles, springs, landing gear, and air tank painted in a black tone ----General information: * Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing ring * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located in the central locking storage areas, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with continuous side walls, upper section reinforced with internal tube, without central stakes, fold-down sides with drop-side spring assist * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270°, not foldable, with additional pivot frame for automatic rear door opening during tipping, locking by galvanized rotary bar lock at the rear and central locking, deactivation function for the automatic rear door when reversing with open swing doors * Each corner with 1 x 5 t lashing point, plus 4 x 3 t recessed lashing rings per side in the outer frame * 4 mm fine-grain steel floor plate * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles Cgjdpfx Ahjl Th Hteusn * Lockable storage compartment for ramps recessed under the loading area at the rear * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanized * Axles, suspension, air tank, and landing gear painted in black * Tires: 285/70 19.5 * Sideboard paint finish in RAL 9010 pure white * Additional color options for side walls in RAL colors available at extra cost * Vehicle has a day registration (not in use) * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * Drawbar extension by 250 mm to 2,250 mm total length ----Electrics / Lighting: * Tire pressure monitoring with display function in truck via EBS signal - no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on headboard exterior * Side underrun protection * Plastic quarter mudguards Coderwc R Aspfx Ahusgn ----Low Loader Area: * 50 mm softwood flooring * Pre-fitting at headboard for retrofitting container locks * Bolted 400 mm smooth plate headboard * Bolted rear stanchions * Sideboards with spring assist ----Load Securing: * Perforated outer frame, approx. 45°, bent, with 2 t lashing capacity every 480 mm * Option for 3 t retractable lashing rings every 600 mm * One 6.3 t lashing ring in each corner front and rear * Various bores for 1.2 t lashing points in headboard and rear crossmember ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm proximity) * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40l/min up to max. 140l/min) ----Paintwork: * Chassis, drawbar, headboard, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange eye painted in black * Sideboard paint in RAL 9010 pure white * Painting of side panels available in any RAL color at extra cost ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Lateral underrun protection * Foldable A-frame shield at the rear ----Electrics / Lighting: * 15-pin power socket * Multi-chamber taillights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each * Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unloaded loading height approx. 710 mm ----Load Securing: * 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips * Each side with 1 x (13.5 t) UVV tie-down point for securing lashings * 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 Cjdpfxol Th Dme Ahujgn ----Wheelbase: * Wheelbase: 1,140 mm ----Paint / Finish: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – truck-side installation not required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with both 12 and 24 V electrical systems ----General Equipment: * Front support winch * Outward-folding rear supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted on the right front side of the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fixture in front of bulkhead for retrofitting container locks * 400 mm screwed bulkhead made of smooth sheet Cgsdpfx Ahoxvgrpsusn * Removable rear stanchions * Drop sides with spring assist ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece hydraulic open-grid loading ramps, approx. 2,750 x 600 mm (can be telescoped to 20 mm spacing) * Hydraulic flow divider in the trailer (for pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical rear supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange eye painted black * Drop sides painted in RAL 2011 deep orange * Side walls can be painted in any RAL color for an extra charge ----Notes: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with compensating aggregate ----Drawbar / Flange towing eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: Cjdpfoxvgrijx Ahusgn * Tire pressure monitoring system, displayable in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the headboard * Side underrun protection * Plastic quarter mudguards ----Low loader deck: * 50 mm softwood flooring * Headboard fitted for subsequent installation of container locks * 400 mm smooth steel removable headboard, bolted * Rear stanchions bolted * Sideboards with spring assist ----Load securing: * Outer frame perforated and edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Multiple bores in the front and rear cross members for 1.2 t lashing options ----Ramps: * Single-piece hydraulic mesh ramps approx. 2,750 x 600 mm (collapsible to 20 mm apart) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, headboard, mechanical drop-down supports, and ramps hot-dip galvanized * Axles, springs, air tank, front landing gear and flange towing eye painted in black * Sideboards painted in RAL 2011 deep orange * Painting of side panels in any RAL colour available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering function as well as return-to-ride valve * Pressure gauge for axle load determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panels front and rear * Front axle: plastic quarter mudguards with spray guards * Rear axle: straight, galvanized steel side skirts with spray guards * Reflective contour marking tape, side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reverse lights (controlled by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section ahead of turntable platform approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye left & right in front of front bulkhead support, 4 holes per side in the turntable platform for 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the end support, 4 pairs per side of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and recessed in the outer frame, 3 stake pockets per side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out outriggers for 3 m overall width (not in the rear slope) * Plank holder for extensions mounted longitudinally under the chassis on the left * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, with 2 pairs per side of 6.4 t lashing eyes in the excavator arm rest * Hardwood floor on the running surfaces of the low bed platform * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer boards of the loading ramps made of hardwood Codpol Tnu Aofx Ahuegn * Steel construction prepared for 6-valve control block * Loading edge unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, and drawbar painted in black shade-- * Tires 235/75 R 17.5 * The vehicle has a day registration from 07/2024, due to the lack of a tire pressure monitoring system, and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm front right side on the chassis * 15-pin power socket * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks installed at each locking point of the central locking system, plus 2 hooks on the front wall * Chassis made of fine-grained steel * Steel pallet three-way tipper body with continuous side walls, internal tube reinforcement, no center posts, foldable with drop-side spring assist * Rear posts bolted Cedjl Th Duspfx Ahujgn * Combination steel wing-door tailgate, asymmetrically split with 2 leaves, can be swung and locked to 270°, not foldable; with additional pendulum frame for automatic tailgate opening during tipping, rear locking with galvanized rotary bolt and central locking system, deactivation function for automatic tailgate function when tipping backwards with open wing door * Each corner fitted with 1 x 5 t lashing ring, and each side with 4 x 3 t lashing points recessed in the outer frame * 4 mm fine grain steel floor plate * Rear mounting rail for loading ramps * Reinforced structure with cargo securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment from the rear, recessed under the loading area in the chassis for storing the ramps * Chassis, drawbar, underrun protection, rear post, and rear folding supports galvanized * Axles, springs, air tank, and landing gear painted black * Tires 285/70 R 19.5 * Drop-sides painted RAL 9010 pure white * Sidewall painting available in an RAL color of your choice for an additional charge * Vehicle has day registration (unused) * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Available end of February 2026 | Reference number for inquiries: 27678 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- * Gross vehicle weight: 14,400 kg, Payload: 10,950 kg * LED lighting system * GIGANT axles, EBS, twin tyres 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized front wall, 400 mm high * Excavator bucket support made of hardwood, screwed onto the front wall * Floor height unloaded: 930 mm / loaded: 870 mm * One-piece ramps with hot-dip galvanized grating, anti-slip design, can be pushed together to approx. 20 mm, secured by holding rods and angled supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV folding lashing brackets (LC 6,300 daN) * Perforated outer frame (45°-angled with hole pattern for lashing equipment, lashing capacity per point LC 2,000 daN at a minimum distance of 480 mm. Installation of folding lashing brackets LC 3,000 daN at approx. 600 mm spacing possible) with closely spaced cross-members, high-profile front and rear ends, and rear access slope, hot-dip galvanized * 10 UVV lashing brackets, LC 3,000 daN, retractable into the existing hole grid in the outer frame, additional Cgsdpfxoyadz Rj Ahujn * Additional lashing options through holes (Ø 50 mm, LC 1,200 daN) in front and end beams * Toolbox in front of the front wall * Side marker lights with indicator activation * Softwood flooring, 50 mm thick. Chassis hot-dip galvanized * 2 recessed container locks in the front beam * Height-adjustable landing leg in the front, folding support legs in the rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, 50 mm eye available on request * 1 removable LED warning light at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. 515 euros for 60 months term, no down payment, no residual value * ---- * Our opening hours * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 Outside of business hours, we are available by appointment We speak German, English, Polish, and French Leasing, financing, and trade-in options available

Stanje: rabljeno, največja dovoljena obremenitev: 28.700 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2013, naslednji pregled (TÜV): 09/2026, skupna širina: 2.550 mm, Oprema: ABS, Celoten naš vozni park z vozili, ki so takoj ali kmalu na voljo, najdete na naši spletni strani. Codpfxjx Tx Elj Ahuogn Izvleček opreme. Celoten seznam opreme na zahtevo. * Bager korito, približno 2.800 x 770 x 280 mm * 2-delne hidravlične rampe, približno 2.100 x 2.100 x 700 mm, hidravlično pomične * Hidravlična zadnja podpora * Hidravlična dvižna postelja, dolžina približno 4.020 mm * Deloma gumirana nakladalna površina in rampe * Prekrivna plošča za rampe * Razširljiva nakladalna površina * Wabco Smartboard * Zračno vzmetenje z dvigovanjem in spuščanjem * 2 delovni žarometi na rampah * Hidravlične povezave za vlečno vozilo * 15-polna elektrika + ABS * 50 mm vlečni obroč * BPW osi * Labodji vrat z leseno podlago * Vratna orodjarna z vgrajenim pokrovom v labodjem vratu

Stanje: rabljeno, največja dovoljena obremenitev: 22.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2002, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 24.000kg/ 30.000kg Lastna teža: 7.500kg Nosilnost: 16.500kg/ 22.500kg Skupna dolžina: 11.600mm Nakladalna dolžina: skupno cca 9.250mm/ nizkopodnožni del cca 7.150mm/ dvignjen del 2.100mm Širina: 2.550mm/ nakladalna širina cca 2.500mm Višina nakladalne površine: 900mm Dodatne informacije Codpox E I Uaefx Ahujgn - Kolesne vdolbine - Vdolbina za roko bagra - Hidravlične rampe, deljene, cca 640x3.300mm - Razširitev 3m - Opozorilne table - Shranjevalni prostor pod nakladalno površino - Velik komplet za privezovanje - Shranjevalni prostor v dvignjenem delu - Žepki za količke - LED vzvratne luči - Dvojna montaža 235/75R17,5 - BPW osi - Zaščita proti podvozu Na voljo takoj tudi novi in rabljeni nizkopodnožni priklopniki s 3 ali 4 osmi. Več informacij na

Stanje: rabljeno, največja dovoljena obremenitev: 8.000 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2000, dolžina tovornega prostora: 5.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Gross weight: 11,000 kg Unladen weight: 3,000 kg Payload: 8,000 kg Overall length: 7,450 mm Loading length: total 5,600 mm, including rear sloping section 1,000 mm Width: overall width 2,550 mm / platform width 2,480 mm Loading height: approx. 900 mm Further information - Sideboard height: 400 mm, split, foldable - Split spring-assisted ramps, dimensions approx. L: 3,380 mm W: 600 mm - Ramps covered with phenolic resin-coated plywood - Large lashing package - BPW axles - Tyres 235/75 R17.5 - LED reversing lights - Plastic toolbox Cgjdpjwz Drgefx Ahuon

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation at front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning panel packages at front & rear * Contour tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrical systems * Removable rear LED warning beacon * 24 V – 15-pin, plus additional 12 V – 7+4-pin power cable * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel, as well as basket-style spare wheel holder on the right side * Closed front single plastic mudguard Cgodpfxjrczm Ds Ahuon * Straight rear steel mud aprons each with spray protection (spray suppressant) * Side underrun protection * Extended offset kink by 500 mm forward * Turntable platform front extension by 520 mm with 45° corners and 3 recessed storage compartments incl. covers and lockable * Chassis made of high-tensile fine-grained steel * Turntable platform flooring made of 50 mm, and low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo wood * Four stake pockets each side (stakes not supplied), with simultaneous 2 t lashing capacity * Load securing package consisting of: 2 lashing eyes 6.4 t at the front left and right on the main frame of turntable platform, one pair each 13.4 t lashing rings at the front and rear on the outer frame, plus four pairs each side 10 t swivel and retractable lashing rings, loadable in all directions and recessed into frame; 2 pairs 6.4 t lashing rings by the excavator arm recess; 8 pairs galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in a side compartment on the left * Excavator arm recess above rear axle extending to the end of the approach slope, approx. 2,300 x 740 x 190 mm * Mechanical rear landing legs * Hydraulically operated, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp displacement on sliding pipe from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, turntable, loading ramps, rear mechanical folding supports hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black shade * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 14 / 2026

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2025, * EK 9.6 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brake ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Drawbar Eye: * Drawbar as central beam with 40 mm bolted drawbar eye * Infinitely adjustable drawbar height with spindle lifting element instead of fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck via EBS signal – no truck-side installation required * 15-pin electrical connector * LED tail lights * Flashing side marker lamps ----General Fittings: * Landing gear at the front * Enclosed plastic mudguards * Foldable underrun protection for paver operations ----Chassis: * Chassis made from high-tensile fine-grain steel ----Tipper Body: * Pallet- 3-way tipper body * 700 mm steel front wall * Asymmetrical continuous aluminum sideboards without central stanchion, fold-down with full-length latches and swinging function via manual central locking * Steel rear wall, 800 mm high, with automatic rear wall opening during tipping to the rear Cgjdpfjw Ndr Usx Ahuon * 4 mm Hardox 450 steel floor ----Load Securing: * Each side has 2 pairs of 3 t lashing rings, recessed and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underrun protection hot-dip galvanized * Tipper body painted RAL 9010 pure white ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display option in truck via EBS signal (no truck-side installation required) * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5 ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment mechanism * Tool box made from powder-coated sheet steel as well as spare wheel holder in basket design, mounted right side * Reflective contour markings on sides & rear Cgedpfx Ahsl Tnwzsujn * Enclosed side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper protection buffer * Foldable rear A-sign * LED tail lights * 15-pin electrical power connector * Hot-dip galvanized main frame with raised outer frame rails for roll container guidance * Sheet steel floor with integrated roll pockets in bogie area * When transporting roll-off containers, container lengths of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking plus mechanical insertable stop angles front along the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers possible with a maximum volume of 10 m³ * 8 lockable, repositionable skip locators for lateral centering of skips, front 4 are insertable with swiveling stops * 3 pairs of 10 ton UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips, 4 lashing bars in cloverleaf design (side) each, and 1 pair of 13.4 ton UVV lashing rings toward the front * Load securing package with additional 4 x 8 ton lashing eyes per side, recessed in the outer frame * Load securing certificate as per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in ramp running area * Mechanical rear support legs * Aluminum loading ramps (10.6 tons/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage from rear) * --Permissible gross weight technically possible: 20,000 kg-- * New vehicle, unregistered, with manufacturer's warranty * Subject to prior sale and errors * Immediately available ex Egstorf

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (adjustable by 300 mm) * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * Tire Pressure Monitoring System (TPMS) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation for subsequent mounting of container locks in front of the bulkhead * Bolted smooth sheet steel bulkhead * Side walls made of trapezoidal-profiled steel, foldable with board wall spring lifts * Steel rear wall, slidable between the ramps — storage bracket for unused rear wall in front of the bulkhead * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various drill holes in the header and tail member for 1.2 t lashing options ----Ramps: Cgodpfx Aorvvflehuon * One-piece mechanical grating ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear access slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall * Drop side color in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available for an additional charge ----Information: * -- Reinforced and certified body according to EN 12642 XL incl. load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display possible in truck via EBS signal (without truck-side installation) * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5 t axles * Air suspension with manual lowering at rear * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Side and rear reflective contour tape * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bump stops * Foldable A-sign at rear * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised external frame for guiding roll containers * Steel deck with roll recesses in the bogie area * Suitable for roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp lock and mechanically insertable front guide blocks in the track * Load securing certificate according to DIN 30722-1 Cgsdpjl Tld Iefx Ahuon * 1 transport of up to 2 skip containers with max. 10 m³ volume possible * 8 exchangeable skip stops for lateral centering of the skips, front 4 skip stops plugged in with swiveling retaining block * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning devices for friction- and force-fit securing of the skips, 4 lashing bars in cloverleaf design (side) each and 1 pair of 13.4 t UVV lashing rings at the front * Lashing package with additional 4 x 8 t lashing eyes each side integrated into the outer frame * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip coating in the running track area of the ramp slope * Mechanical drop-down supports at rear * Aluminium loading ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible gross weight technically up to 20,000 kg-- * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with load equalizer unit ----Drawbar / Towing Eye: * Height-adjustable drawbar with 300 mm adjustment range * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange-mounted towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, with drop side assist * Steel rear wall, slidable between the ramps (with storage holder inside front bulkhead when not in use) Cgjdjxglibspfx Ahuen * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t flip-up lashing brackets every 600 mm * In each corner at front and rear, 1 x 6.3 t lashing ring * Various holes in front bulkhead and rear cross-member for 1.2 t securing options ----Ramps: * One-piece mechanical steel grid drive-on ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear slope approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop side color in RAL 2011 deep orange * Side wall paintwork in any RAL color shade available at extra cost ----Further Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles Csdpfx Aheq Dyvveuegn ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release mechanism for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (up to 300 mm) * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * RDÜ (Tyre Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanised folding supports at the rear * Plastic toolbox front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards Cjdoxglh Rjpfx Ahusgn ----Low-loader Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Trapezoidal-profiled steel side panels, foldable and with board wall spring lift * Steel rear wall can be slid between the ramps; storage bracket in front of bulkhead when not in use * Bolted rear posts ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating access ramps with spring unit for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanised chassis as well as drawbar, bulkhead, ramps and rear wall * Side panel colour RAL 2011 deep orange * Painting of side walls in other RAL colours possible at extra charge ----Information: * --Reinforced and certified body in accordance with EN 12642 XL including load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from KW 08/2026