Saris Tieflader Mit Rampen*Tüv*4 M Lang*Trommelbremsen nakup rabljenega (59.821)

Stanje: rabljeno, največja dovoljena obremenitev: 2.000 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2016, naslednji pregled (TÜV): 11/2025, Leto izdelave: 2016, Oprema: ABS, SARIS TRAILER WITH 2-AXLE LOW LOADER WITH RAMP, TÜV VALID UNTIL 11/2025 ----VEHICLE FEATURES * TYPE: C2C * 2 AXLES * DRUM BRAKES * ADJUSTABLE RAMP * PERFECTLY SUITABLE FOR MINI EXCAVATORS, FORKLIFTS, ETC. * 4 M LONG * PERMISSIBLE TOTAL WEIGHT: 3,500 KG * UNLADEN WEIGHT: 1,500 KG * PAYLOAD: 2,000 KG * TIRE SIZE: 185 / 70 R13 * TÜV: 11 / 2025 * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) ----EXPORT DECLARATION / CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5-DAY, 30-DAY PLATES, AND 17–21-DAY AUSTRIA PLATES (EURO 1 DOCUMENT) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and non-EU countries, a deposit of at least €500.00 / €1,000.00 is required. Subject to change, error, and prior sale! You can find more vehicles on our website. Csdpfxeuidc Rs Al Horb Sales are exclusively according to our General Terms and Conditions—see website. Important Notice—Important Information: Despite careful verification of all details in our offer, errors may occur. Some can result from transmission issues with platform providers’ systems. Therefore, please note that all information is given without guarantee and does not constitute a legal claim. Legal Notice: This sales listing does not constitute an offer under §145 BGB (German Civil Code). It is provided as information to initiate a contract. The details provided are without guarantee and do not represent warranted characteristics.

Stanje: rabljeno, največja dovoljena obremenitev: 29.580 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2019, skupna širina: 2.550 mm, skupna višina: 3.020 mm, Oprema: ABS, Kässbohrer nizkopodni polpriklopnik s 3 osmi in 2 rampama Oprema: + 1. os dvižna + 2. in 3. os krmiljena + 2x hidravlični nakladalni rampi, 300 mm + 2x podstavki + Raztegljiv do 4 metrov + Odstranljive kolesne vdolbine za stroje do 3,40 m + BPW osi + Zračno vzmetenje + ABS Nudimo tudi podporo pri financiranju/leasingu s partnerji. Vse informacije brez garancije. Pridržujemo si pravico do napak in vmesne prodaje. Cjdpfx Aloy H Tfms Hsrb

Stanje: rabljeno, prva registracija: 01/1989, barva: rdeča, Leto izdelave: 1989, Oprema: ABS, Langendorf 2-axle Low loader with ramps ABS Tyres 60% GR 10.5-20 10PR IDNR 686 We look forward to advising you, signing the contract or handing over the vehicle at our dealership. Please arrange an appointment. If you are unable to visit us in person, we offer full processing via phone, email, WhatsApp or fax. On request, we can deliver your new vehicle directly to your door. This means you benefit from the best price as well as maximum safety and convenience when making your purchase. We are happy to accept your used vehicle as part exchange. We offer digital vehicle valuation based on photos of your vehicle without requiring a visit to our dealership. Our specialised purchasing team guarantees you the highest price. On request, we can deliver your new pre-owned vehicle nationwide directly to your doorstep and collect your old vehicle—trade-in, financing, or leasing options available. Instant approval and old loan settlement possible. Your specialist partner for cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Estate) Codpoxxkrrsfx Al Herb Over 400 vehicles always in stock. All information provided in advertisements, on the internet, price tags and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical or transmission errors. Listed features may need to be checked separately. All offers are generally without new TÜV inspection; we are happy to provide you with an offer for a new inspection via our partner workshop. Subject to errors and prior sale. = Further information = Unladen weight: 1,700 kg Payload: 3,300 kg Gross vehicle weight: 5,500 kg VAT/margin scheme: VAT deductible.

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear Cedpfx Alol Tlhrj Herb * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes Crodpfx Ael Tnu Asl Heb * 4 x 11 t Gigant axles * Air suspension with lift and lowering function as well as return-to-ride valve * Pressure gauge for axle load determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panels front and rear * Front axle: plastic quarter mudguards with spray guards * Rear axle: straight, galvanized steel side skirts with spray guards * Reflective contour marking tape, side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reverse lights (controlled by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section ahead of turntable platform approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye left & right in front of front bulkhead support, 4 holes per side in the turntable platform for 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the end support, 4 pairs per side of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and recessed in the outer frame, 3 stake pockets per side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out outriggers for 3 m overall width (not in the rear slope) * Plank holder for extensions mounted longitudinally under the chassis on the left * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, with 2 pairs per side of 6.4 t lashing eyes in the excavator arm rest * Hardwood floor on the running surfaces of the low bed platform * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer boards of the loading ramps made of hardwood * Steel construction prepared for 6-valve control block * Loading edge unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, and drawbar painted in black shade-- * Tires 235/75 R 17.5 * The vehicle has a day registration from 07/2024, due to the lack of a tire pressure monitoring system, and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 30.700 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2002, Oprema: ABS, * MüllerMitteltal nizkopodni priklopnik s 4 osmi T40 * 2x krmiljeni vrtljivi osi * Nemška prikolica * pero * hidravlično pomične rampe / levo-desno * deljene preklopne rampe * možnost razširitve * ABS Codpfx Ajyuri Eol Herb * BPW osi * 40 t * lastna teža: 9300 kg * osne obremenitve = 10 t na os * popolnoma funkcionalen * pnevmatike v redu

Stanje: novo, največja dovoljena obremenitev: 2.625 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.560 mm, širina tovornega prostora: 1.840 mm, višina nakladalnega prostora: 350 mm, Saris K3 356 184 3500 E Three-way Tipper with Ramp Channels Body size: 3.56 x 1.84 x 0.35 m Permissible total weight: 3,500 kg Crjdpfex T R S Rsx Al Hob NEW VEHICLE – Robust three-way tipper with a steel floor reinforced by a sturdy wooden base. Electrically tipperable with integrated ramp channels. * Steel sheet floor with reinforced wooden base * Ramp channels located under the loading platform * Electro-hydraulic tipping function incl. battery * All-sided, drop-down and removable aluminium side panels * 8 tie-down rings inside and 8 outside * Fully galvanized and welded frame * Overrun brake with automatic reverse function Available accessories: * Pair of aluminium loading ramps (load capacity 2,700 kg/pair) for €639 incl. VAT * 100 km/h upgrade for €250 incl. VAT * Heavy-duty rear support stands for €250 incl. VAT * 60 cm mesh sides, removable on all 4 sides, for €1,189 incl. VAT * 90 cm mesh sides, opening on all 4 sides, for €1,449 incl. VAT * High tarpaulin and bows on request Sales, consultation and pickup in Zell by appointment only. Please note: Due to current material shortages affecting suppliers, quoted prices for trailers, accessories, and components may vary due to material surcharges. Subject to prior sale and errors. Please inquire for availability and final prices. Large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Hapert, and WM-Meyer always available immediately or at short notice. Online ordering also possible. For home transport, we offer our temporary transit plates for €20. Delivery within Germany available for an additional fee!

Stanje: novo, največja dovoljena obremenitev: 2.525 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 2.040 mm, višina nakladalnega prostora: 350 mm, Saris K3 406 204 3500 Heavy Duty E4 Meter Three-Way Tipper Electric with Ramp Compartments Internal dimensions: 4.06 x 2.04 x 0.35 m. Gross vehicle weight: 3,500 kg NEW VEHICLE – Robust 4-metre three-way tipper with steel floor reinforced by a sturdy wooden base. Electrically tipper-operated with integrated channels for loading ramps. * Steel sheet floor reinforced with wooden base * Ramp compartments included under the load area * LED lighting * Electrohydraulic tipping incl. battery * All aluminium drop sides foldable and removable * 8 internal and 8 external lashing rings * Fully galvanised and welded frame * Overrun brake with reverse automatic Available accessories: * Pair of aluminium loading ramps (load capacity 2,700 kg/pair) for €689 incl. VAT * 100 km/h upgrade for €250 incl. VAT Crjdpfxjx T R Tho Al Heb * Heavy-duty rear supports for €250 incl. VAT * Mesh sides (60 cm or 90 cm), as well as high tarpaulin and bows available on request Sales, consulting, and collection in Zell by appointment only. Please note: Due to the current shortage of materials from suppliers, the advertised prices for trailers, accessories, and components may vary due to surcharges for increased material costs. Subject to prior sale and errors excepted. Please enquire for availability and final prices. We always have a large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Humbaur, and WM-Meyer available immediately or at short notice. Also available for online order. For your journey home, we can provide you with a transit number plate for €20. Delivery within Germany available for an extra charge!

Stanje: novo, največja dovoljena obremenitev: 2.700 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.840 mm, višina nakladalnega prostora: 300 mm, Saris K3 306 184 3500 E Three-Way Tipper with Ramp Compartments Bed dimensions: 3.06 x 1.84 x 0.30 m Permissible total weight: 3,500 kg NEW VEHICLE – Robust three-way tipper with a steel floor reinforced by a sturdy wooden base. Electrically tiltable with compartments for loading ramps. * Steel floor reinforced with wooden base * Ramp compartments located under the loading area * Electro-hydraulic tipping function incl. battery * All side walls made of aluminum, foldable and removable * 8 lashing rings inside and 8 outside * Fully galvanized and welded frame * Overrun brake with automatic reversing function Available accessories: * Pair of aluminum loading ramps (load capacity 2,700 kg/pair) for EUR 639 incl. VAT * 100 km/h upgrade for EUR 250 incl. VAT * Heavy-duty rear support legs for EUR 250 incl. VAT * Removable mesh sides 60 cm, four-sided, for EUR 989 incl. VAT * Opening mesh sides 90 cm, four-sided, for EUR 1,149 incl. VAT * High tarpaulin and bows on request Cedpfx Alox T Sa Ns Horb Sales, consulting, and pick-up in Zell by appointment. Please note: Due to the current material shortages at our suppliers, the listed prices for trailers, accessories, and components may be subject to surcharges for increased material costs. Subject to prior sale and errors. Please inquire about availability and final prices. We always have a large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Humbaur, and WM-Meyer available immediately or at short notice. Also available for online order. For self-collection, we can provide a temporary license plate for EUR 20. Delivery within Germany is possible for an additional fee!

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension of 250 mm for a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck cab via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrics ----General attachments: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Pre-equipment in front of the bulkhead for subsequent installation of container locks * Bolted 400 mm bulkhead made of smooth sheet * Rear stakes bolted * Drop sides with spring-assisted lifting mechanism ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various drill holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail along the centre longitudinal axis, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (collapsible to 20 mm spacing) * Hydraulic flow divider in the trailer (when hydraulic pump output in truck exceeds 40 l/min, max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical rear supports and ramps hot-dip galvanized * Axles, springs, air tanks, landing gear and flange eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls available painted in any RAL colour for an additional charge Csdpfx Aerwc R Rjl Hsrb ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from approx. week 16/2026

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Support winch at the front * Foldable external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Prepared in front of bulkhead for retrofitting container locks * Bolted 400 mm bulkhead of smooth steel plate * Bolted rear posts * Side boards with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing brackets every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various drilled holes in bulkhead and rear cross member for 1.2 t lashing points * Profifix lashing rail, centrally along longitudinal axis, for load securing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be retracted to 20 mm clearance) * Hydraulic flow divider in trailer (for hydraulic pump output in the truck of over 40 L/min to a max. of 140 L/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop-down supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted black * Drop sides painted in RAL 9010 pure white * Side panels painted in RAL colour of choice at extra cost ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images Credpforwc R Aex Al Hjb ----Delivery time: * Available from approx. week 16/2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm, up to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fittings for retrofitting container locks in front of the headboard and rear slope for the transport of 20" containers * Bolted headboard, smooth sheet * Side walls: folding, split once in the middle, made of trapezoidal sheet metal * Steel rear wall, can be inserted between ramp holders, stored in front of the headboard when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various holes in headboard and end beam for 1.2 t lashing options * Profifix lashing rail in longitudinal axis, central, for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance) * Rear approach slope approx. 860 mm chassis Credpev Eq Evofx Al Hsb ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, headboard, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted in black * Side wall panels painted in a RAL colour of your choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power plug * LED lighting ----General Fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation before the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers * Bolted bulkhead made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, folding design, divided centrally Csdpfxov D Tcbe Al Herb * Steel rear wall, can be inserted between the ramp brackets, stowed inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Slotted outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optionally, installation of 3 t folding lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing point * Various holes for 1.2 t lashing options in the bulkhead and rear crossmember * Profifix lashing rail along the centerline for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid approach ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach slope approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, rear panel, folding supports, and approach ramps hot-dip galvanized * Axles, springs, air tank, flange drawbar eye, and support winch painted in black * Side wall paint in a RAL color of your choice (special or metallic paints not available), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified construction according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions Crsdpfx Aloxglibj Heb ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front Codpfxoxglh Re Al Hjrb * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: rabljeno, prva registracija: 04/1993, lastna masa: 550 kg, največja dovoljena obremenitev: 1.450 kg, skupna masa: 2.000 kg, barva: siv, vrsta prenosa: mehanski, vzmetenje: drugo, Low-loader, first registered on 06/04/1993. Loading ramp, Rockinger coupling. Payload: 1,450 kg. Permissible total weight: 2,000 kg. FOR US, CONDITION AND OVERALL IMPRESSION ARE CRUCIAL, PRICE IS SECONDARY. For further information, please contact Mr. Faller at the provided number. //*TRADE-IN, ACCEPTANCE OF YOUR VEHICLE AS PART PAYMENT OR COLLATERAL, AS WELL AS FINANCING POSSIBLE! All information without guarantee* More offers can be found on our homepage. The description and specified data do not constitute a guarantee and are not binding. The only binding agreement is the purchase contract concluded at the dealership when buying the vehicle. Subject to errors and prior sale! Crsdsl Tikhepfx Al Hsb

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Additional Options and Accessories = - Spare wheel - Twin tires = Notes = Müller Mitteltal 2-axle T5 2AL low loader with ramps Air suspension BPW axles ABS ZSA Tires 60% tread, GR 235R17.5 ID No.: 665 We look forward to welcoming you for consultation, contract signing or vehicle collection at our dealership. Please arrange an appointment in advance. If you are unable to visit us in person, we offer complete processing via phone/email/WhatsApp/fax. On request, we deliver your new vehicle directly to your door. This means you get the best price, maximum security, and convenience when buying your vehicle. Trade-in We are happy to take your used vehicle in part exchange. We offer the possibility of digital vehicle valuation based on your photos, even without visiting our dealership. Our specialized purchasing team offers you a guaranteed top price. On request, we will deliver your new pre-owned vehicle nationwide right to your doorstep and take your old vehicle back with us. Financing – Leasing Credpfsxw T Uaox Al Hob Immediate approval and settlement of existing loans. Your specialist partner for cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Visit us on our website Always over 400 vehicles in stock The information provided in advertisements, online, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may require separate verification; the offer is generally without new TÜV inspection, but we would be pleased to make you an offer through our partner workshop. Subject to errors and prior sale. = Additional Information = Unladen weight: 8,900 kg Payload: 26,100 kg Gross vehicle weight: 35,000 kg Sales price: €18,000, US$21,210

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) Crodpfxeq Dyvyj Al Hsb ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Braking System: * EBS Electronic Braking System * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow Bar / Flange Towing Eye: * Height-adjustable tow bar, adjustable by 300 mm * Tow bar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: Cjdpfx Aopk Dv Rel Hsrb * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist * Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard * Bolt-on rear posts * Rear approach angle approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps * Side wall color RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 2.700 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 1.820 mm, višina nakladalnega prostora: 300 mm, Saris Magnum Maxx 3500 V Excavator Transporter New, robust transporter trailer designed for excavators and machinery, featuring a low loading height and excellent chassis. Large model with a 4-meter load area! Load area dimensions: 406 x 182 x 30 cm (LxWxH) Permissible gross weight: 3,500 kg * Fully welded and hot-dip galvanized frame * Heavy-duty steel loading ramps (140 cm, continuously adjustable) * Solid waterproof wooden floor * 10 heavy-duty lashing rings (1,000 kg each) * Heavy-duty jockey wheel * Reinforced, walkable mudguards * Protected lighting bar * Price includes vehicle documents! Available accessories: * Force One Package (aluminum checker plate overlay on wooden floor & tread plates on mudguards) for €699 incl. VAT * Excavator bucket support for €199 incl. VAT (see photos) * Rear drop-in panel for €239 incl. VAT * Rear mesh between ramps for €649 incl. VAT * 100 km/h speed conversion for €290 incl. VAT * Additional accessories available upon request Crjdpfex T Scwjx Al Hob Sales, consultation, and collection in Zell by appointment. Please note: Due to current material shortages at suppliers, listed prices for trailers, accessories, and components may be subject to material surcharges. Errors and prior sale excepted. Please inquire for current availability and final pricing. Constantly large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Hapert, and WM-Meyer available immediately or at short notice. Also available for online order. For home transport, we can provide you with a transfer license plate for €20. Delivery within Germany available for an additional charge!

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: Credorvvfljpfx Al Hjb * Height-adjustable drawbar (adjustable by 300 mm) * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * Tire Pressure Monitoring System (TPMS) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation for subsequent mounting of container locks in front of the bulkhead * Bolted smooth sheet steel bulkhead * Side walls made of trapezoidal-profiled steel, foldable with board wall spring lifts * Steel rear wall, slidable between the ramps — storage bracket for unused rear wall in front of the bulkhead * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various drill holes in the header and tail member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear access slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall * Drop side color in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available for an additional charge ----Information: * -- Reinforced and certified body according to EN 12642 XL incl. load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: Cedpfeq Dyvvex Al Herb * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Low Loader Semi-Trailer with Ramps, Type SDS 470 T Gross Weight: 41,000 kg / 47,000 kg Unladen Weight: 8,900 kg Payload: 32,100 kg / 38,100 kg Overall Length: 13,300 mm Loading bed: 9,200 mm Ramps: 2,800 mm x 750 mm with spring assist Air suspension Excavator arm recess Csdok N Aflspfx Al Herb Large lashing package 70 mm hardwood flooring SAF axles, 3rd axle self-steering Plus pre-carriage / provision ex stock Wiesmoor €1,280.00 net Vehicle available immediately from stock. Hire purchase offer: Term 48 months, 40% residual value, down payment VAT only. Monthly installment EUR 999.00 (net only)

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.350 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Flatbed, ABS, air suspension with lift/lower function, axle load scales, total platform length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), cleat strip on outside of ramps and rear slope, ramps adjustable sideways, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, mandatory contour marking, rotating beacon, spring-loaded parking brake, incl. axle load indicators, chassis fully hot-dip galvanized, Surcharge for: hydraulic ramp adjustment, Price: €1,000. -- Subject to typing errors, mistakes, and changes. Sample images. For more data see: !, More Details: ! Cedpfx Aloy Niu Nj Hjrb

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigovanjem in spuščanjem, tehtnice za obremenitev osi, skupna dolžina tovorne površine ca: 9.100 mm, nizko ležišče ca: 6.900 mm dolgo, nakladalna višina obtežena ca. 890 mm, 24 x pritrdilnih ušes po 10 t, 12 x žepov za stebričke v zunanjem okvirju, nakladalne rampe (ca. 3.100 x 760 mm), stopničasta letev na zunanji strani ramp in zadnjega naklona, rampe bočno nastavljive, lesena tla debeline 68 mm, skladiščna škatla z pokrovom za pritrdilne verige ali pasove, označba obrisa po predpisih, rotacijska opozorilna luč, zavorni sistem s federnim pomnilnikom, vklj. z indikatorji obremenitev osi, vozilo vroče pocinkano v potopni kopeli, doplačilo za: hidravlično pomikanje ramp = cena: 1.000 €, -- napake v tisku, pomote in spremembe pridržane, slike so simbolične --, Več podatkov na: !, More Details: ! Crjdpfx Aloy Izrqj Hjb