Fliegl Dts 300 P nakup rabljenega (33.279)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS 300 P
Pokliči
Stanje: novo, številka stroja/vozila: 2dff0c136c85096f36822a0bb, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis - Low-bed Trailer
Steel welded construction
Turntable with heavy-duty slewing ring, storage box integrated into turntable front section
Foldable rear supports
2 wheel chocks with holders
Aluminium side underrun protection
Full-width rear mudflaps
Extendable extensions to 3,000 mm (not at the rear bevel)
(Note: The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Central storage compartment for timber boards on the loading platform
70 mm timber boards for extension to 3,000 mm
Low-bed lashing rings
3 pairs of 10 t lashing points integrated into the front floor
6 pairs of 10 t lashing mushrooms recessed in the top and side of the outer frame
1 x by the neck area
The remaining points are distributed at no more than 1200 mm intervals
1 x at the rear bevel
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included)
Drawbar Turntable Trailer Coupling
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum-braked axles
Axles/chassis laser-aligned to reduce tyre wear and fuel consumption
Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical
Axle load equalisation (rocker balancing)
Brake System
2-line compressed air brake system
Coloured line routing for easy service
Spring-loaded parking brake included
2 fail-safe coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS plug at the front, with connecting cable
Note: The trailer may only be towed by vehicles ensuring the proper function of ABS!
Wheels and Tyres
235/75 R 17.5
Manufacturer’s choice
Steel twin wheels, factory silver finish
Electrics
24 volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin fail-safe plugs at the front, with connecting cable
1 LED beacon with holder, switched via parking lights (removable beacon)
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm
Floor
Steel floor in the front section, followed by 70 mm softwood flooring; wheel arch covers in steel/chequer plate
Rear bevel with 70 mm softwood flooring
Low-bed area incl. rear bevel 8,200 mm
Access Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered, included
With spring assist
Operating Notes
An exemption permit is required for 10,000 kg axle load—only indivisible loads allowed!
The specified total weight is technically achievable, but depending on the load, the permissible total weight may not be reached due to axle/support/kingpin limits. (Poor driving and tracking may result from incorrect load distribution)
Country of Registration/Plates
Country of registration: Germany
With Dekra inspection and appraisal (according to §13 EU-FGV)
24/7 service hotline
Prepared for double-line license plate holder
Contour marking with reflective stripes per ECE R 048, white to the side, red to the rear
Paintwork
Frame DB 7350 Novagrau
Cgodpfsi Riy Eox Al Het
10-year guarantee against rust-through
Drawbar galvanized or black, manufacturer's choice
Access ramps hot-dip galvanized
Note: Archive images!
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS 300 P mit Radmulde
Pokliči
Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information
Chassis Low-loader Trailer
Steel welded construction
1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note!
Frame is 400 mm higher in the main beam area than at the wheel recess.
If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side.
Turntable with robust ball race ring, storage box integrated in the turntable front section
Rear supports foldable
2 wheel chocks with holder
Aluminium side underrun protection
Full-width rear mudflap
Extending wideners to 3,000 mm (not in rear bevel area)
(The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm)
Central storage compartment for wooden planks on loading area
70 mm wooden planks for widening to 3,000 mm
Lashing eyes low-loader
3 pairs of 10 t lashing points integrated in the floor at the front incl.
6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t
1 x at the gooseneck
The remaining distributed between, spacing not greater than 1,200 mm
1 x rear bevel
5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
Drawbar assembly trailer turntable
Drawbar with tested 40 mm towing eye
Axles & Suspension
SAF drum-braked axles
Axles/chassis laser aligned to reduce tyre and fuel wear
Parabolic suspension with maintenance-free steel-rubber bearings
Brake system
2-line compressed air brake system
Colour-coded piping for easy service
Spring loaded parking brake
2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS plug at the front, with connection cable
Note: The trailer may only be towed by tractor units which ensure the functionality of ABS!
Wheels and tyres
235 / 75 R 17.5
Manufacturer’s choice
Cgsdpfxsi Ri Rye Al Hjt
Steel rims in twin arrangement, factory silver
Electrics
24 Volt, multi-chamber lights, side yellow LED illumination
2 white position lights at front
2 white/red track marker lights at rear
2 x 7-pin interchange-proof plugs at front with connecting cable
1 LED beacon with bracket, switched via parking light (removable lamp)
2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm
Floor
Front area steel floor, incl.
Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering
Rear bevel with 70 mm softwood floor
Low-loader deck incl. rear bevel 8,200 mm
Loading ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered
With spring lifting aid
Operating instructions
For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!!
The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution)
Country of registration / Plates
Country of registration: Germany incl.
With Dekra approval and certificate (according to §13 EC - FGV)
24/7 service hotline
Prepared for two-line number pla
Mali oglas
Gralla
84 km
Prikolica z nizko platformo
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Pokliči
Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, cargo area length: 6,500 mm. Tyre size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: . Leaf suspension. 3-axle low-bed trailer with drop-bed DTS-S 300
- Turntable with robust ball bearing ring
- Rear supports, foldable
- 1 spare wheel carrier for 1 spare wheel, incl. wheel mounting kit
- 1 spare wheel, same brand and type as main tyres, steel rim
- 1 plastic toolbox
- Extendable load width up to 3,000 mm (not in rear slope)
- Storage compartment for timber planks in the centre of the low-bed platform
- Timber planks, 70 mm, for widening to 3,000 mm
Tie-down points on low-bed:
- with spring-loaded lifting aid
Axles + suspension:
- SAF
- Drum brake axles
- Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation)
Braking system:
Csdotcwkrjpfx Al Hogt
- Dual-line compressed air brake system
- Spring-loaded parking brake
Electrics:
- 24 Volt, multi-chamber lights, yellow LED side lights
- 1 LED beacon with mounting bracket, controlled via parking light (removable beacon)
- 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm
Floor:
- Storage box recessed into drive-up angle at the drop bed
- Then 70 mm softwood floor, steel/chequer plate covering in wheel arch area
- Rear slope with 70 mm softwood floor
Ramps:
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, covered with wood
- 1 pair of ring lashing eyes recessed front in drop bed, 10 t
- 4 pairs of lashing holes in rear area, 5 t each for tensioning strap hooks
- 7 pairs of lashing points recessed top and side in outer frame, 10 t each (1 x front in drop bed, 6 x in low bed)
- 5 pairs of stanchion pockets recessed in outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes for extra cost)
- 2 additional pairs of folding lashing eyes, 10 t each, 1 x front in drop bed, 1 x behind 3rd axle
Axles + suspension:
- SAF
- Drum brake axles
- Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation


Več kot 140.000 povpraševanj po nakupu mesečno
Izvedite več zdaj
+49 201 858 95 507
Mali oglas
Gralla
84 km
Prikolica z nizko platformo
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfun7
Pokliči
Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device
Codpfxoyxh Rzo Al Hegt
Mali oglas
Burghaun
637 km
Nizki nakladalnik
FlieglDTS 300 Rampen BPW auf 3.000mm verbreiterbar
Pokliči
Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2018, Oprema: ABS, = Dodatne opcije i oprema =
- Vazdušno ogibljenje pozadi
- Vazdušno ogibljenje napred
= Napomene =
Za sva pitanja vezana za vozilo, obratite se gospodinu Seidelu (telefon: ) rado.
Fliegl DTS 300 niskopodni prikolica
BPW osovine, doboš kočnice, federski akumulatori, mehaničke rampe, dozvoljena ukupna masa: 24.000 kg, težina praznog vozila: 6.350 kg, nosivost: 17.650 kg, dimenzije tovarnog prostora: dužina 8.490 mm, širina 2.510 mm, profil guma: 1. osovina 7-12 mm, 2. osovina 7-8 mm, 3. osovina 4-7 mm
Na zahtev, nudimo vam ponudu za lizing ili finansiranje.
Gospodin Seidel (telefon: ) vam rado stoji na raspolaganju.
Više informacija možete pronaći na našoj web stranici.
Cgodpjy Adc Isfx Al Het
... Greške, izmene i prethodna prodaja zadržane!!! -
= Dodatne informacije =
Težina praznog vozila: 6.350 kg
Nosivost: 17.650 kg
Dozvoljena ukupna masa: 24.000 kg
Spoljašnje dimenzije: 0x2550x3500
Za više informacija obratite se Tobiasu Ebertu.
Mali oglas
Gralla
84 km
Prikolica z nizko platformo
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Pokliči
Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate approval technically possible Gross weight: 24,000 kg, 30,000 kg, payload approx.: 17,400 kg, 23,400 kg; unladen weight approx.: 6,600 kg +/- manufacturing tolerance. Dimensions (approx.): Total length 10,900 mm, total width 2,550 mm, gooseneck length 2,180 mm, low bed platform length incl. rear chamfer 6,500 mm, rear chamfer length 950 mm, frame width 2,520 mm, loaded loading height in low bed 860 mm, coupling height 900 mm, drawbar length 1,900 mm.
Equipment:
- Extendable width up to 3,000 mm (not in rear chamfer), incl. timber planks
- SAF drum brake axles
- Parabolic suspension
Cgedpfx Aox Nrp Nol Hst
- Drawbar with certified 40 mm towing eye
- Tyres 235/75 R17.5
- Storage box recessed at the transition to the gooseneck
- 1 plastic toolbox with shelf, 620 mm wide / 360 mm high / 440 mm deep
- Steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, timber-coated
- Ramps with spring assist
- Frame hot-dip galvanised
Subject to errors and changes.
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS S 300 Parab/Hydr.
Pokliči
Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holders
Aluminium side underrun protection
Full-width rear mudflap
Half-shell mudguards on 1st axle with anti-spray mudflaps
Anti-spray mudflaps behind 2nd and 3rd axle
1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock
Extendable width up to 3,000 mm
Central storage compartment for timber planks on loading area
70 mm timber planks for widening to 3,000 mm
Lashing rings for low-bed (40 lashing points)
1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t
4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks)
7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t
1 at the front on the gooseneck
6 in the low-bed section
First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm
5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes)
2 pairs of additional folding lashing eyes, each rated for 10 t
1 on the gooseneck (protruding)
1 recessed behind the last axle
Drawbar coupling for turntable trailer
Drawbar with certified 40 mm towing eye
Axles + Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer)
Wheels and tyres
235/75 R 17.5
Manufacturer's choice
Steel rims in twin configuration, factory silver
Braking system
2-line pneumatic braking system
Spring-actuated parking brake
2 fail-safe coupling heads at the front, with connecting lines to towing vehicle
ABS and ALB, ABS connector at the front with connecting cable
Brand: Wabco, Knorr or Haldex
Electrics
24 Volt, multi-chamber rear lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marking lights at the rear
Cedpoi Ri Dlsfx Al Hegt
2 x 7-pin fail-safe plugs at the front, with connecting cable
1 LED beacon with bracket, controlled via parking lights (removable beacon)
2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm
Floor
Gooseneck front with steel tread plate covering
Storage box recessed in the transition to the gooseneck
Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering
Rear chamfer with 70 mm softwood flooring
Low-bed area incl. rear chamfer: 6,500 mm
Loading ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Timber-layered
Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front
Hydraulic connection with SVK coupling NW 10/3, including connecting hose
Country of registration / Plates
Country of registration: Germany
24/7 service hotline
Prepared for two-line number plate holder
Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear
Warning board according to ECE - 70
Paintwork
Frame hot-dip galvanized incl. passivation
15-year warranty against rust-through
Drawbar galvanized or black, at manufacturer's discretion
Loading ramps hot-dip galvanized
Note: These are archive images!
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS S 300 Parab/Feder
Pokliči
Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low-Loader Trailer
Steel welded construction
Turntable with robust ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear spray flap
Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle
1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included)
Extendable width up to 3,000 mm
Storage compartment for wooden planks in the centre of the loading area
70 mm wooden planks for extension to 3,000 mm
Tie-down lugs for low loader (40 lashing points)
1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t
4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps)
7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t
1 at the front on the gooseneck
Codpfx Alsi Ri Ddj Hjgt
6 in the low bed
First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included)
2 additional pairs of folding lashing rings, each rated at 10 t
1 on the gooseneck (protruding)
1 behind the last axle, recessed in the floor
Towing Device Turntable Trailer
Drawbar with certified 40 mm towing eye
Axles and Suspension
Drum brake axles, manufacturer’s choice
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel rims, twin arrangement, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit
ABS and ALB, with ABS socket at the front and connecting cable
Manufacturer: Wabco or Knorr
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane lights at the rear
2 x 7-pin non-interchangeable plugs at the front with connecting cable
1 LED beacon with bracket, switched with parking lights (removable beacon)
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm
Floor
Gooseneck at the front with steel/chequer plate covering
Toolbox recessed into transition slope to gooseneck
Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area
Rear taper with 70 mm softwood floor
Low-loader deck including rear taper: 6,500 mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Timber surfaced
With spring lift assistance
Country of Registration / License Plates
Country of registration: Germany
24/7-Service Hotline
Prepared for two-line license plate holder
Contour marking with reflective strips according to ECE R 048, white on sides, red at rear
Warning sign according to ECE-70
Painting
Frame hot-dip galvanized including passivation
15 years’ warranty against corrosion perforation
Drawbar galvanized or black, manufacturer’s choice
Loading ramps hot-dip galvanized
Attention! Archive images shown!
Mali oglas
Wiesmoor
957 km
Prikolica z nizko platformo
FLIEGLDTS 300 3-Achs Tiefl 6,5m Parab Hydraulik
Pokliči
Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, From ongoing production
Gross weight: 24,000 kg / 30,000 kg
Unladen weight: 6,100 kg
Payload: 17,900 kg / 23,900 kg
Overall length: 10,890 mm
Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm loading deck
Width: 2,520 mm
Loading height: 860 mm
Additional information
Steel welded construction
Turntable with heavy-duty slewing ring
Foldable rear supports
Wheel chocks with holder
Aluminum side underrun protection
Full-width rear spray flap (not compatible with forklift holder)
Half-shell mudguards on 1st axle with anti-spray flaps
Anti-spray flaps behind 2nd and 3rd axles
Plastic toolbox
Extendable width up to 3,000 mm
Storage compartment for timber planks positioned centrally on the loading area
70 mm timber planks for widening to 3,000 mm
Tie-down points for low-loader
1 pair of lashing cut-outs in the front longitudinal beam on the gooseneck, each 10 t
4 pairs of lashing holes on the outer frame of the gooseneck, each 5 t (for attaching tension belts)
7 pairs of lashing mushrooms flush-mounted on top and on the sides of the outer frame, each 10 t
1 in front on the gooseneck, 6 in the low-bed
Pairs of ring lashings flush-mounted in the outer frame, each 5 t (can be converted to stake pockets)
Cgodeuytx Sepfx Al Hjt
Additional pairs of folding lashing points, each 10 t
1 on the gooseneck
1 recessed in the floor behind the last axle
Drawbar equipment for turntable trailer
Drawbar with certified 40 mm towing eye
Drawbar height adjustment via spring
Axles and suspension
Drum brake axles, manufacturer’s choice
“Axle/chassis laser alignment” for reducing tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancer)
Wheels and tires
235/75 R 17.5"
manufacturer’s choice
Steel twin wheels, factory silver
Braking system
Dual-line compressed air brake system
Spring-loaded parking brake
2 fail-safe coupling heads at the front, with connector lines to the tractor unit
24 V ABS and ALB, with ABS plug at the front and connecting cable
Electrics
24 V, multi-chamber lights, yellow LED side marker lights
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pole fail-safe plugs at the front, with connecting cable
LED beacon with holder, switched via parking light (removable beacon)
Pair of double warning boards, LED-illuminated and extendable to 3,000 mm
Floor
Gooseneck at front with steel/chequer plate decking
Storage compartment recessed into the transition slope to the gooseneck
Then approx. 70 mm softwood floor, in wheel arch area with steel/chequer plate decking
Rear bevel with 70 mm softwood floor
Low bed area including rear bevel 6,500 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Additional lower ramp safety (prevents lateral slippage of ramps, not compatible with side hydraulic ramp adjustment)
Wooden covering (tip area with steel/chequer plate)
Hydraulic operation via tractor PTO with restrictor, operation on driver side left
Hydraulic connection with SVK plug NW 10/3, incl. connection hose
Paintwork
Frame hot-dip galvanized including passivation
Access ramps hot-dip galvanized
plus freight / provision ex works 26639 Wiesmoor: €1,280.00 net
Mali oglas
Wiesmoor
957 km
Prikolica z nizko platformo
FLIEGL3 Achsen Tieflader DTS 300, hydraulische Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan
Cgedpfx Aoxb Nmyol Hst
Skupna masa 24.000 kg / 30.000 kg
Nosilnost 17.920 kg / 23.920 kg
Lastna teža 6.080 kg
Skupna dolžina 10.900 mm
Nakladalna dolžina 8.680 mm
Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom
Parabolično vzmetenje
Dolge rampe 2.800 mm s hidravličnim upravljanjem
Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo
Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton
5 parov žepov za nosilce
Vlečni obroč 40 mm
plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto
Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV.
Mesečna najemnina: 500,00 EUR
Mali oglas
Wiesmoor
957 km
Prikolica z nizko platformo
FLIEGLDTS 300 3-Achs Tiefl 6,5 Parabel Feder - 843
Pokliči
Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000 kg / 30,000 kg
Unladen weight: 6,100 kg
Payload: 17,900 / 23,900 kg
Overall length: 10,890 mm
Load length: total 8,670 mm; gooseneck section 2,170 mm; loading deck 6,500 mm
Width: 2,520 mm
Loading height: 860 mm
Further information:
Plus pre-carriage / provision ex stock location 26639 Wiesmoor: 1,280.00 €/net
Chassis Low-bed trailer
Cgjdswlmr Repfx Al Het
Steel welded construction
Turntable with heavy-duty slewing ring
Foldable rear supports
2 wheel chocks with holder
Aluminum side underrun protection
Full-width rear spray flaps (not in conjunction with forklift holder)
Quarter-shell mudguards in front of 1st axle
Anti-spray flaps behind the 2nd and 3rd axle
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable
Extendable deck widenings to 3,000 mm (not in rear incline area)
(Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm)
Storage compartment for timber planks in the center of the loading deck
70 mm timber planks for widening to 3,000 mm
Tie-down points low-bed
1 pair of lashing recesses in the longitudinal beam at the front, integrated into gooseneck, each 10 t
4 pairs of lashing holes in outer frame of gooseneck, each 5 t (for attaching tension straps)
7 pairs of lashing mushrooms, integrated top and side in outer frame, each 10 t
- 1 x front in gooseneck section
- 6 x on lower deck
First lashing eye 250 mm from front, last max. 250 mm from rear; maximum distance between lashing eyes 1,100 mm
5 pairs of ring lashing eyes, integrated into the outer frame, each 5 t (convertible to stake pockets)
2 pairs of additional folding lashing eyes, each 10 t
- 1 x on gooseneck (overhanging)
- 1 x in floor behind last axle
Towing unit trailer turntable
Drawbar with certified 40 mm towing eye
Drawbar height adjustment by spring
Axles + suspension
BPW drum brake axles
"Axle/chassis laser alignment" - reduces tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancing)
Wheels and tires
235 / 75 R 17.5"
manufacturer’s choice
Steel rims in twin arrangement, factory silver
Braking system
2-line compressed air brake system
Spring-actuated parking brake
2 error-proof coupling heads at the front with connecting lines to towing vehicle
24V ABS and ALB, with ABS socket at the front and connecting cable
Attention: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS!
Electrics
24 volts, multi-chamber lights, yellow LED side marker lights
2 white position lights at the front
2 white/red lane indicator lights at the rear
2 x 7-pin error-proof plugs at the front, with connecting cable
1 LED rotating beacon with holder, switched via parking light (removable lamp)
2 pairs of warning boards, double-sided LED illuminated and extendable to 3,000 mm
Floor
Gooseneck front with steel/chequer plate covering
Storage box recessed into drive-over slope of gooseneck
Followed by approx. 70 mm softwood floor, steel/chequer plate covering at wheel arch area
Rear slope with 70 mm softwood floor
Low-bed area incl. rear slope: 6,500 mm
Access ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp safety lock, foldable at bottom (prevents lateral slippage, not in conjunction with side hydraulic ramp adjustment)
Wood surfaced (tip area with steel/chequer plate)
With spring-assisted lifting
Operating instructions
With 10,000 kg axle load, a special permit is required, only
Mali oglas
Schwebheim
554 km
Prikolica z nizko platformo
FlieglDTS 300 3 Achs Tiefladeranhänger
Pokliči
Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm.
This vehicle is being offered on behalf of a bank.
Cedpfx Ajy Izthol Hegt
-- Subject to typographical errors, mistakes, and changes. Sample images --
More data at: !
More details: !
Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
FlieglDTS-S 300, verbreiterbar auf 3,05m
Pokliči
Stanje: novo, lastna masa: 5.740 kg, največja dovoljena obremenitev: 24.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, barva: srebrn, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, rotacijska luč, 3 osi, SAF osi, vrtljiva ploščad, listnate vzmeti, ABS (protiblokirni sistem), možnost razširitve na 3 m, pritrdilne zanke, nakladalne rampe v dveh delih, mehanske rampe, izvlečna vlečna gred, stranska aluminijasta zaščita, dvojne pnevmatike, EBS.
Nadgradnja: dolžina nakladalne površine pribl. 8,5 m, možnost razširitve na 3,05 m. Predstavitveno vozilo!
Parabolično vzmetenje z izravnavo osi zadaj, 3x 10 t SAF osi, možna dovoljena skupna masa 30 t, po dolžini nastavljiva vlečna gred.
Novo vozilo iz zaloge z enodnevno registracijo na proizvajalca! PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, spremembe, vmesna prodaja in napake so pridržane!
Cgsdpjxbttqjfx Al Hot
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS 300 mit Radmulden
Pokliči
Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low Loader Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holders
Aluminum side underrun protection
Rear mudflaps across the entire width
Quarter shell fenders in front of 1st axle
1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess.
2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess.
Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area)
(The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area)
(The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
70 mm timber planks for extension to 3,000 mm
Tie-down points on low loader
1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t
4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps)
7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t
1x at the front in the kink
6x in the loading bed
First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm
Drawbar for turntable trailer
Drawbar with certified 40 mm towing eye
Axles & suspension
SAF drum brake axles
Laser axle/chassis alignment – reduces tire wear and fuel consumption
Parabolic spring suspension with maintenance-free steel-rubber bushings
Wheels and tires
235 / 75 R 17.5
Manufacturer's choice
Steel rims in twin arrangement, factory silver
Braking system
2-line compressed air braking system
Spring-applied parking brake
2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!
Electrics
24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front
2 white/red lane guidance lights at the rear
2 x 7-pin fail-safe connectors at the front, with connection cable,
1 LED rotating beacon with holder, switched via side light (removable beacon)
2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm
Floor
Front kink with steel/checkered plate covering
Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering
Tail ramp with 70 mm softwood floor
Low loading area including tail ramp: 6,500 mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Cgodpsi Ri Rvjfx Al Hjt
Wood-covered
With spring assist
Operating Instructions
For 10,000 kg axle load an exemption is required, only indivisible loads allowed!
The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTS 300
Pokliči
Stanje: novo, številka stroja/vozila: f8fb99947a1c19bc4d63549ff, lastna masa: 6 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Cgedpji Riwfsfx Al Het
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Rear foldable support
2 wheel chocks with holders
Side underrun protection in aluminium
Full-width rear mudflap
Half-shell mudguards on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles
1 plastic toolbox with shelf, dimensions: width 620 mm, height 360 mm, depth 440 mm, lockable with padlock (padlock not included)
Extendable width up to 3,000 mm (not at rear slope) (track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm)
Central storage compartment for timber planks on the loading platform
70 mm timber planks for widening to 3,000 mm
Tie-down eyes for low-loader:
1 pair of flush-mounted ring lashing eyes at the front on the swan neck, each rated at 5t
7 pairs of lashing mushroom pins, recessed on top and sides of outer frame, each rated at 10t
1x front on swan neck
6x in low bed area
First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included)
2 additional pairs of foldable lashing eyes, each rated at 10t
1x on swan neck (protruding)
1x behind the last axle, recessed in the floor
Drawbar assembly for turntable trailer:
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Parabolic springs with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation)
Wheels and Tyres
235/75 R 17.5
Manufacturer's choice, with M&S marking
Steel rims in twin arrangement, factory silver finish
Braking System
2-line compressed air braking system
Spring-actuated parking brake
2 foolproof coupling heads at the front, with connecting lines to the towing vehicle
ABS and ALB, with ABS socket at the front and connecting cable
Brand: Wabco or Knorr
Note: The trailer may only be towed by vehicles that ensure the proper functioning of the ABS!
Electrics
24 Volt, multi-chamber lights, yellow LED side marker lights
2 white position lights at the front
2 white/red lane departure lights at the rear
2x 7-pin foolproof plugs at the front with connecting cable
1 LED beacon with bracket, switched via parking lights (lamp removable)
2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm
Floor
Front swan neck with steel chequer plate covering
Storage box recessed in the approach slope to the swan neck
Then 70 mm softwood flooring, in wheel arch area with steel chequer plate
Rear slope with 70 mm softwood flooring
Low-bed area incl. rear slope 6,500 mm
Loading Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp safety device, foldable at the bottom (prevents lateral displacement of ramps, not in combination with laterally hydraulic ramp adjustment)
Wooden covering
Spring-assisted lifting support
Operating Instructions
At 10,000 kg axle load, a special permit is required, only indivisible loads allowed!
The specified total weight is technically possible, but depending on the cargo, the total weight may not be achievable while complying with the permissible axle, support, and king pin loads (poor handling or tracking may result from incorrect load distribution)
Country of Registration / Pla
Mali oglas
Wiesmoor
957 km
Prikolica z nizko platformo
FLIEGL3 Achsen Tieflader DTL-S 300 P Agrar Plateau
Pokliči
Stanje: novo, največja dovoljena obremenitev: 23.340 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, chassis and frame hot-dip galvanized
Gross weight: 24,000 kg / 30,000 kg
Payload: 17,340 kg / 23,340 kg
Unladen weight: 6,660 kg
Overall length: 11,625 mm
Cedpfjllwhnsx Al Hegt
Platform length: 9,000 mm incl. 900 mm approach slope
Loading height: 900 mm
Large lashing package
40 mm drawbar
Tyres: 235 / 75 R 17.5'' twin wheels
without ABS, approval max. 60 km/h
Electrical system 12 Volt, LED rotating beacon
Ramps with spring lifts, ramp length 2,800 mm
Vehicle from ongoing production – delivery lead time approx. 14 days.
plus freight/preparation ex stock Wiesmoor €1,280.00 / net
Towing vehicle LoF, agricultural or forestry registration
Lease-purchase offer: term 48 months, residual value 40%, down payment only the VAT.
Monthly rate: €599.00
Mali oglas
Wiesmoor
957 km
Prikolica z nizko platformo
FLIEGL3 Achsen Tieflader DTS 300 Luftfederung
Pokliči
Stanje: novo, največja dovoljena obremenitev: 23.890 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Vehicle from current production
Cgedpfxok N Adke Al Het
NEW VEHICLE Fliegl 3-axle low loader type DTS 300, hot-dip galvanized
Gross weight: 24,000 kg / 30,000 kg
Payload: 17,890 kg / 23,890 kg
Unladen weight: 6,080 kg
Overall length: 10,900 mm
Load length: 8,680 mm
Loading bed: 6,500 mm incl. 900 mm approach ramp
Loading height: 860 mm
Air suspension with lift and lower valve
Long loading ramps 2,800 mm, hydraulically operated
Extendible width to 3,000 mm with warning signs and rotating beacon
Heavy-duty lashing package with 5.0 and 10.0 t lashing points
5 pairs of stake pockets
Drawbar eye 40 mm
plus delivery/transport fee ex-stock Wiesmoor EUR 1,280.00 net
Hire purchase offer: Term 48 months, final residual value 40%, down payment VAT only.
Monthly instalment: EUR 609.00
Mali oglas
Wiesmoor
957 km
Prikolica z nizko platformo
FLIEGLDTS 300 3-Achs Tiefl Luft Hydraul - 780
Pokliči
Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300
Vehicle fully hot-dip galvanized
Gross weight: 24,000kg / 30,000kg
Unladen weight: 6,100kg
Payload: 17,900 / 23,900kg
Overall length: 10,890mm
Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck
Width: 2,520mm
Loading height: 860mm
Further information:
plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net
Leasing offer: Term 48 months, down payment only the VAT. Residual value 40%
Monthly installment: EUR 569.00
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
Wheel chocks with holders
Aluminum side underrun protection
Full-width rear mudflaps (not in combination with forklift mounting)
Semi-shell fenders on 1st axle with anti-spray mudflaps
Anti-spray mudflaps behind 2nd and 3rd axles
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable
Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm)
Central storage compartment for wooden planks on the loading area
70 mm wooden planks for extension to 3,000 mm
Lashing points for low-loader
1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t
4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps)
7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed)
First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm
5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets)
2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle)
Drawbar assembly for turntable trailer
Drawbar with certified 40 mm towing eye
Drawbar height adjustment via spring mechanism
Axles & Suspension
Drum brake axles, brand per manufacturer’s choice
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Air suspension with raise & lower valve
Cgsdpfx Aov D T R Eol Hst
Wheels and tires
235/75 R 17.5'', per manufacturer’s choice
Steel twin wheels, factory silver finish
Braking system
Dual-line compressed air brake system
Spring-operated parking brake
Vehicle stability control system
Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale)
2 non-interchangeable coupling heads at front with connection lines to tractor unit
24V EBS, electronic braking system with EBS connector at front and connecting cable
Note: The trailer may only be towed by towing vehicles that ensure proper ABS function!
Electrics
24V, multi-chamber lights, side yellow LED lighting
2 white position lights at front
2 white/red lane control lamps at rear
2 x 7-pin non-interchangeable connectors at front, with connection cable
1 LED revolving beacon with holder, switched via parking light, removable
2 pairs of warning panels, double LED-lit and extendable to 3,000mm
Floor
Gooseneck front with steel/chequer plate cover
Storage compartment recessed in gooseneck ramp
Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate
Rear bevel with 70 mm softwood flooring
Low-loader platform including rear bevel: 6,500mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, side mounted
Mali oglas
Apeldoorn
941 km
Nakladalna ploščad
FlieglDPS 300 2016 BPW, Trommelremmen
Pokliči
Stanje: rabljeno, prva registracija: 09/2016, barva: drugo, Leto izdelave: 2016, Oprema: ABS, = Druge možnosti in oprema =
Cedpfx Aey Avafjl Hsgt
- BPW osi
- Dvižna os
- Bobnaste zavore
= Opombe =
Fliegl,
2016,
BPW osi,
1. os dvižna,
bobnaste zavore
= Podatki o podjetju =
Bančni podatki:
Račun pri Rabobank: 39.33.10.655
IBAN: NL73RABO0393310655
SWIFT koda: RABONL2U
- Pred transakcijo vedno preverite naše bančne podatke!
- Vozila ni možno rezervirati brez pologa.
- Pridržujemo si pravico do napak pri pisanju in besedilu za vsa ponujena vozila.
Mali oglas
Mühldorf am Inn
298 km
Prekucna polprikolica
FlieglFliegl ZSKA 300
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S1576, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 20 m³, vzmetenje: hidravlika, velikost pnevmatike: 600/55-R26,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.810 mm, največja hitrost: 60 km/h, barva: rdeča, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2025, Opis
Podvozje lakirano u novosivoj: Optimizovano za korisnu nosivost s integriranim okvirom vozila
Ukupna masa 31.000 kg, opterećenje na zadnjoj osovini do 20.000 kg, prihvaćeno opterećenje sedla 11.000 kg, međuosovinski razmak cca 1810 mm,
Visina sedla cca 1400 mm
Podizna nožica
Teška kiper korpa 30 cbm s cilindrom napred
Poluokrugli čelični bunker od Hardoxa 400, debljine 6 mm, cca 7.200 mm x 2.250 mm x 1.200 mm, kompletno čelična korpa grundirana, boja crvena
Hidraulična zadnja stranica (potreban 1 dvosmerni hidraulički priključak)
Kočioni sistem sa 2 kruga zraka
2 osovine s kočnicama, zadnja osovina upravljiva, automatski blokirajuća
Osovine s doboš kočnicama standard
Čelične felne
Cgodoyik R Iepfx Al Hot
Izvedba za 60 km/h za Nemačku s TÜV dokumentacijom (uključuje kontur svetla, bočne oznake)
Hidraulično vešanje
Hidraulično preklopiva zaštita od podletanja
Osvetljenje 24 V s 15-polnom utičnicom, bez spojnog kabla
Zadnja kontur svetla (bela/crvena)
Prednja poziciona svetla (bela)
Označavanje kontura po ECE R 048
Prodaja podložna prethodnoj prodaji! Informacije bez garancije!
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglZTS 200 P
Pokliči
Stanje: novo, številka stroja/vozila: 535119ca408d3bd5a8e74be51, lastna masa: 6 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information
Chassis Low-bed Trailer
Steel welded construction
Turntable with robust ball bearing slewing ring, storage box integrated into turntable front section
Foldable rear support
Wheel chocks with holders
Aluminum side underrun protection
Cgedpfji Ri N Hsx Al Hjt
Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle
with anti-spray flaps behind each axle
1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (lock not included)
Extendable widening to 3,000 mm (not in rear taper)
(Track width of construction machines or vehicles to be transported must not exceed 2,550 mm external frame width), storage compartment for wood planks centered in the loading area, 70 mm planks for widening to 3,000 mm,
Tie-down eyes low-bed
3 pairs of lashing points integrated in the floor at the front, each rated for 10 t
6 pairs of lashing mushrooms recessed in the top and sides of the external frame, each rated for 10 t
1x after neck area, rest distributed in between, spacing not greater than 1,200 mm
1x rear taper
5 pairs of ring lashing eyes recessed in external frame, each rated for 5 t (instead of stake pockets)
Trailer turntable drawbar
Drawbar with tested 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings
Wheels and Tires
235 / 75 R 17.5
manufacturer's choice
Twin steel rims, factory silver
Braking System
2-line air brake system
Spring-loaded parking brake
2 fail-safe coupling heads at the front, with connecting lines to the tractor unit,
ABS and ALB, with ABS connector at the front, with connecting cable
Attention: The trailer must only be towed by towing vehicles that ensure the effectiveness of ABS!
Electric system
24 Volt, multi-chamber lights, yellow LED side marker lights
2 white/red width marker lights at rear
2 white position lights at front
1 rotating beacon with bracket, switchable via parking lights (removable beacon)
2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm
2 x 7-pin fail-safe connectors at the front, with connecting cable
Floor
Front area steel floor,
then 70 mm softwood floor, wheel arch area with steel/tread plate covering
Rear taper with 70 mm softwood floor
Low-bed area incl. rear taper 8,200 mm
Access Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp safety below, foldable (prevents lateral slipping, not in conjunction with hydraulic side shift)
wooden planking
with spring assist
Operational Notes
A special permit is required for an axle load of 10,000 kg. The permit must be applied for individually in each federal state, and the legislator is not obliged to grant approval for a 20 t gross vehicle weight. Customer's risk.
The specified gross weight is technically possible, depending on the cargo the gross weight may not be achievable while observing the permitted axle, support, and kingpin loads.
Registration / Plates
Registration country: Germany
EC type approval acc. to 2007/46
24/7 service hotline
Prepared for two-line number plate holder
Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear
Warning sign according to ECE - 70
Paintwork
Frame DB Nova grey
Access ramps hot-dip galvanized
Note: Archive images!
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglDTL 300 Agrar
Pokliči
Stanje: novo, številka stroja/vozila: b50cac2c60a813b0968994fa0, lastna masa: 5.700 kg, največja dovoljena obremenitev: 18.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Full-width rear mudflap
Preparation for widening to 3,000 mm (holes in outer frame, not in rear bevel)
Low-loader lashing rings
1 pair of lashing cutouts embedded in the front longitudinal beam at the gooseneck, each rated for 10 t
7 pairs of lashing mushroom pins embedded on top and side of the outer frame, each rated for 10 t
1 x on the front gooseneck
5 x in the low-bed area
1 x in the rear bevel
12 pairs of lashing holes in the outer frame, each rated for 5 t (for lashing strap hooks)
5 x at the gooseneck, 6 x in the low-bed area, and 1 x in the rear bevel
Drawbar system for turntable trailer
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles, brand as per manufacturer’s choice
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer)
Wheels and Tires
235 / 75 R 17.5 Fulda
Steel rims in twin arrangement, factory silver
Brake System
2-line air brake system
Spring-loaded parking brake
2 unmistakable coupling heads at the front, with connecting lines to the truck,
Connecting lines extended by approx. 60 cm
No ABS, but with mechanical ALB (automatic load-dependent brake valve), thus maximum 60 km/h permit
Electrics
Cjdsi Ri Agspfx Al Hogt
12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors
2 white position lights at the front
2 white/red lane marker lights at the rear
1 x 7-pin 12 Volt plug at the front with connecting cable, extended by approx. 60 cm
1 LED beacon with holder, operated via parking light (lamp removable)
2 pairs of illuminated and extendable warning plates up to 3,000 mm
Floor
Front gooseneck with steel/chequer plate covering
Toolbox recessed in the drive-over slant to gooseneck
Following area with 70 mm softwood floor, wheel arch area with steel/chequer plate covering
Rear bevel with 70 mm softwood floor
Low-bed loading area including rear bevel: 5,900 mm
Loading Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wooden covering
Spring-assisted lifting
Operating Instructions
For axle loads of 10,000 kg, an exemption permit is required; only indivisible loads permitted!!!
The stated total weight is technically possible; depending on the load, the total weight may not be achievable within the allowable axle/support and fifth wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution)
Country of Registration / Plates
Country of registration: Germany
With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle as agricultural/forestry vehicle (LoF), (for Switzerland, max. 40 km/h possible)
Prepared for double-line license plate holder
No contour markings / reflective tape according to ECE R 048
Painting
Frame: DB 7350 Novagrau
10-year corrosion protection warranty
Drawbar galvanized or black, according to manufacturer’s choice
Loading ramps hot-dip galvanized
Note: Archive images!
Mali oglas
Triptis
562 km
Nizki nakladalnik
FlieglVTS 400 P
Pokliči
Stanje: novo, številka stroja/vozila: 55d3c5c03e032385649769b1b, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information
Chassis Low-Loader Trailer
Steel welded construction
Turntable with heavy-duty slewing ring, integrated storage box incl.
Turntable front structure
Foldable rear support
2 wheel chocks with holders
Aluminum side underrun protection
Cgjdpfx Aji Ri I Eol Het
Full-width rear mud flaps
Extendable widenings to 3,000 mm (not at rear taper)
(track width of the machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm)
Central compartment on loading area for timber planks
70 mm timber planks for widening to 3,000 mm
Lashing points Low-loader
3 pairs of integrated lashing points, each rated to 10 t, at the front floor
6 pairs of mushroom lashing points, top and side integrated in outer frame, each 10 t
1 x at neck area
remaining points distributed, distance no greater than 1,200 mm
1 x at rear taper
5 pairs of stake pockets integrated in the outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
Drawbar assembly for trailer turntable
Drawbar with certified 40 mm towing eye
Note: For 40 mm towing eye, the maximum permissible gross weight of the towing vehicle is 18,000 kg. Otherwise, a 50 mm towing eye is required.
Axles + Suspension
SAF drum brake axles
Laser-aligned axles/chassis to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization front and rear (rocker compensation)
Wheels and Tires
235 / 75 R 17.5
manufacturer's choice
Steel twin wheels, factory silver
Brake system
2-line compressed air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connection lines to the truck
ABS and ALB, with ABS connector at front, connection cable included
Attention: The trailer may only be towed by vehicles that ensure ABS functionality!
Electrics
24-volt multi-chamber lights, side yellow LED lighting
2 white front position lights
2 white/red rear lane marker lights
2 x 7-pin non-interchangeable connectors at the front, with connection cable
1 LED beacon with bracket, operated via parking lights (removable beacon)
2 pairs of warning boards, double LED-lit and extendable to 3,000 mm
Floor
Steel floor at front section
thereafter 70 mm softwood floor, in wheel arch area with steel/chequer plate covering
Rear taper with 70 mm softwood floor
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
wooden inlays
spring-assisted lifting
Operating instructions
Exception permit required for 10,000 kg axle load, only indivisible loads allowed!!!
The specified total weight is technically possible. Depending on the cargo, the full gross weight may not be achieved while observing permissible axle/pin/support loads (poor tracking and handling may result from incorrect load distribution)
Country of Registration / Plates
Registration country: Germany
1 with Dekra inspection and report (according to §13 EC-FGV)
24/7 service hotline
prepared for 2-line license plate holder
Conspicuity markings with reflective strips acc. ECE R 048, white on the sides, red at the rear
Paint
Frame RAL 3002 Carmine Red
10 years warranty against rust-through
Drawbar galvanized or black, at manufacturer's discretion
Loading ramps hot-dip galvanized
Attention: Archive photos!
Mali oglas
Wiesmoor
957 km
Prikolica z nizko platformo
FLIEGLDTL 300 3-Achs Tieflader Agrar Greenl. Hydraulik
Pokliči
Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg
Unladen weight: 5,600kg
Payload: 18,400 / 24,400kg
Overall length: 10,290mm
Loading length: 5,900mm incl. rear bevel
Width: 2,520mm
Loading height: 860mm
Further information:
plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net
Chassis Low-bed trailer
Steel welded construction
Turntable with robust ball bearing ring
Rear support, foldable
2 wheel chocks with holders
Rear splash guards full width (not in combination with forklift holder)
1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable
Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel)
Tie-down points low loader
1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t
7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t
1 x at the front on the cranked section
5 x in the low-bed
1 x in the rear bevel
12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks)
5 x cranked section, 6 x low-bed and 1 x rear bevel
Drawbar equipment Turntable trailer
Drawbar with certified 40 mm towing eye
Drawbar height adjustment by spring
Axles + Suspension
Drum brake axles by manufacturer’s choice
"Axles / chassis laser aligned" reduces tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing)
Wheels and Tires
235 / 75 R 17.5"
by manufacturer’s choice
Steel twin rims, factory silver
Braking system
2-line air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm
Without ABS, but with mechanical ALB, thus max. 60 km/h permitted
Electrics
12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors
2 white position lights front
2 white/red lane marker lights rear
1 x 7-pin 12V plug front, with extension cable approx. 60 cm
1 LED beacon with bracket, switched via sidelights (removable light)
2 pairs warning plates illuminated, extendable to 3,000 mm
Floor
Cranked section front with steel/chequer plate covering
Stow box recessed in transition bevel to cranked section
then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate
Rear bevel with 70 mm softwood floor
Low-bed loading area incl. rear bevel 5900 mm
Ramps
Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable
with timber covering (front area with steel/chequer plate)
Hydraulic via tractor auxiliary drive with restrictor, operation side FR left
Hydraulic connection with SVK plug NW 10/3 incl. connector hose
Operating notes
At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted!
The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect)
Country of registration / plates
Country of registration: Germany
With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry,
(country of registration Switzerland max. 40 km/h possible)
Csdpfxeynvrwe Al Hegt
prepared for double-line license plate holder
without outline marking / reflective strips according to ECE R 048,
Paintwork
Frame hot-dip galvanized incl. passivation
"15 year warranty against penetra—"
Mali oglas
Wiesmoor
957 km
Prikolica z nizko platformo
FLIEGLDTL 300 Agrar Greenlight Hydraul. 3-Achs Tieflad
Pokliči
Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg
Curb weight: 5,600kg
Payload: 18,400kg / 24,400kg
Overall length: 10,290mm
Loading length: 5,900mm incl. rear bevel
Width: 2,520mm
Loading height: 860mm
Additional information:
Plus pre-carriage / handling from storage location 26639 Wiesmoor: €1,280.00 net
Chassis: Low-bed trailer
Steel welded construction
Turntable with heavy-duty ball race bearing
Folding rear support
Wheel chocks with holder
Rear mudflaps across full width
1 plastic toolbox
Preparation for widening to 3,000 mm (holes in outer frame with covers, not in rear bevel)
Lashing rings for low-bed trailer
1 pair of lashing openings in the front beam on the cranked section, each rated 10 t
7 pairs of lashing pins recessed in the top and side of the outer frame, each rated 10 t
1 x in front on the cranked section
5 x in the low-bed section
1 x in the rear bevel
12 pairs of lashing holes in the outer frame, each rated 5 t (for securing straps)
5 x cranked section, 6 x low-bed, 1 x rear bevel
Drawbar coupling (for turntable trailer)
Drawbar with tested 40 mm towing eye
Height adjustment of drawbar by spring
Axles & suspension:
Drum brake axles, manufacturer’s choice
Laser axle/chassis alignment – reduces tire wear and fuel consumption
Parabolic spring suspension with maintenance-free steel-rubber bushing and mechanical load equalization (rocker equalizer)
Wheels and tires:
Cjdpfswlmr Djx Al Hegt
235 / 75 R 17.5”
manufacturer’s choice
Steel rims, dual arrangement, factory silver
Brake system:
2-line compressed air braking system
Spring-loaded parking brake
2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, lines extended by approx. 60 cm
Without ABS, but with mechanical ALB; maximum approved speed 60 km/h
Electrics:
12 Volt, multi-chamber lights, no side LED (yellow) lighting, reflectors on side
2 white position lights at front
2 white/red marker lights at rear
1 x 7-pin 12 Volt plug at front, with connection cable, extended by approx. 60 cm
1 LED beacon with holder, switched via sidelights (lamp removable)
2 pairs of warning plates, double LED illuminated and extendable to 3,000 mm
Floor:
Cranked section at front with steel / checker plate covering
Stowage box recessed in the ramp transition near the cranked section
Then with 70 mm softwood flooring, steel / checker plate in the wheel arch area
Rear bevel with 70 mm softwood floor
Low-bed area incl. rear bevel 5,900 mm
Ramps:
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wood covering (front edge with steel/checker plate)
Hydraulically operated via tractor PTO with throttle, operation LH side compartment
Hydraulic connection with SVK plug NW 10/3, incl. hose
Operating notes:
For 10,000 kg axle load, a special permit is required, only indivisible loads allowed!
The stated total weight is technically possible; depending on the load, it may not be possible to achieve total weight while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking performance possible due to incorrect load distribution)
Country of registration / Signs:
Registration country: Germany
With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (agricultural/forestry),
(Switzerland max. 40 km/h approval possible)
Prepared for double-line license plate holder
Without contour marking / reflective tape per ECE R 048
Paintwork:
Frame RAL 7021, black-grey
"10 years warranty against rust-through"
Drawbar hot-dip galvanized
Ramps hot-dip
Olajšamo vam iskanje: "fliegl dts 300 p"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

















































































































































































