Fliegl Dhks 390 25M³ Stahl-Mulde 3-Achs Hinterki nakup rabljenega (41.507)

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Vehicle is from current production - available in approx. 2 weeks Vehicle / Body: Tipping Trough Gross Weight: 35,000kg / 39,000kg Unladen Weight: 5,500kg !!! Payload: 29,500kg / 33,500kg Total Length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Coupling height approx. 1,200mm Chassis – Semi-Trailer Tipper: - Fine-grained steel welded construction, basic lightweight design - 1x centre support leg - Folding underrun protection - Underrun protection with "spring assistance" for easier operation - Half-shell mudguards - Integrated “mudguard holder” with a stone-repellent surface - With antispray mud flaps only on the rear axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - “Axle/chassis laser measured" for reduced tyre wear and fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted front on curved chassis - 1st axle is an automatic lift axle, also electrically operable from the truck, including forced lowering and start-off assist, without truck installation (start-off assist is functional up to 30% axle overload and up to a max. speed of 25 km/h) Braking System: - 2-line compressed air brake system Coloured line routing for easy servicing. - Spring-actuated parking brake - 2 front foolproof coupling heads, without connecting line - 24 volt EBS, Electronic Braking System with EBS socket at the front, without connection cable - With raise & lower valve - Vehicle stability control system - Automatic tip lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5" European brand, manufacturer’s choice Electrics: - 24 volt, multi-chamber LED lights, side yellow LED marker lights, number plate illumination in LED (Note: with some tractors, diagnostic errors may occur even though functions are correct) Side yellow LED lighting linked with indicator - "flashing side marker lights" - Premium LED side marker lamps, each with 20 LEDs per unit - 2 white front position LED lights included - 2 white/red lane control rear LED lights included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, no connection cables - LED working lights mounted on both sides (activated via reverse light) - 2 additional LED work lights recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm - Hyva make - Operated hydraulically via truck PTO - Hydraulic connection with hose and vehicle plug NW = 54 mm with large wing nut Tipping Body: HARDOX steel round trough in “Stone Master Design” of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Interior with ladder at front wall - Greenline – conical, aerodynamic body design Ljdpfxevhyf Rj Aiceac - Shovel and broom holder on exterior front wall - "Membrane" tailgate - Tailgate as pendulum flap with "double-joint hinge", externally mounted with dual hook lock. 2 clamping bolts with toggle locks at the bottom on each side - Tailgate with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear- and weight-optimised structure - Fliegl S.T.E.P. – swivelling platform at front with folding ladder for side access LH side,

Stanje: rabljeno, največja dovoljena obremenitev: 33.787 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2017, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, skupna širina: 2.550 mm, Skupna teža: 39.000kg/35.000kg Lastna teža: 5.213kg Nosilnost: 33.787kg/29.787kg Ledpfsycbi Rsx Aiceac Skupna dolžina: 8.200mm Nakladalna dolžina: 7.200mm Širina: nakladalna širina 2.350mm / skupna 2.550mm Dodatne informacije: - Notranja višina kesona 1.450mm - Prostornina: 24,5 m³ - Višina pripenjanja: 1.200mm - Palica za ponjavo z nosilcem - BPW osi - Zračno vzmetenje - Jeklen okrogel keson v obliki kadi - Zadnja stena kot nihajna loputa - Ploščad s stopniščem - Enostranska rolo ponjava Vozilo je lahko polepljeno in/ali označeno z reklamami.

Stanje: rabljeno, lastna masa: 5.380 kg, največja dovoljena obremenitev: 30.620 kg, skupna masa: 36.000 kg, prva registracija: 06/2021, vzmetenje: zrak, barva: siv, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, FLIEGL SDS01 DHKS 390 priklopnik prekucnik Jeklena prekucna cisterna, dvigovalna os, aluminijasta platišča, ponjava za streho, lastna masa 5.380 kg, nosilnost 30.620 kg, skupna masa 36.000 kg, 1. lastnik. Odkupimo tudi vaš tovornjak ali ga vzamemo v račun. Ogled vozila na daljavo prek WhatsAppa in Viberja. Po dogovoru lahko organiziramo dostavo na vaš naslov v Nemčiji, Evropi ali do mednarodnih pristanišč za doplačilo. Na zahtevo lahko izvajamo tudi nadzor kakovosti na daljavo, tako da opravimo TÜV za vas (za doplačilo). Hitre in enostavne možnosti financiranja za stranke iz Nemčije. Pri izvozu izven EU je treba kot kavcijo plačati zakonsko določeni DDV. Lodjzd D Tmepfx Aicsac Pridržujemo si pravico do napak in vmesne prodaje. Več ponudb najdete na naši spletni strani. Z veseljem odgovorimo na vaša vprašanja. Govorimo nemško in angleško; češko, francosko, rusko, bolgarsko, nemško in angleško. Vse navedene informacije so brez garancije, vključno z opremo in dodatki.

Stanje: rabljeno, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2021, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Jeklena zadnja kiparska keson cisterna približno 50 m³, kombinirana zadnja vrata z dvojnimi krilnimi vrati z vrtečim zapahom / nihajna loputa, 2 x žitna drsnika, samodejno-mehanska 4-kaveljska zapora, HYVA kiper cilindri, rolo ponjava, podporniki, ABS, EBS, SAF INTRA CD os(i), kolutne zavore, dvižna os, zračno vzmetenje z dvižno-spuščalno napravo, stikalo za vklop/izklop za spuščanje kiperja, vozilo je lahko polepljeno z oglaševalskimi nalepkami in/ali napisano. SI86095 Ljdpfx Aew Ertgeicsac Naša ponudba je načeloma brez novega tehničnega pregleda. Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno z oglaševalskimi nalepkami in/ali napisano. Veljajo naši splošni pogoji dobave in plačila. Z veseljem vam pripravimo ponudbo financiranja ali leasinga za ta predmet. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 28.550 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 1.300 mm, prostornina tovornega prostora: 24 m³, Leto izdelave: 2020, Oprema: ABS, Zrak, dvig, BPW-disk, EBS, PVC polovični blatniki, sredinsko oporni pad, aluminijasta platišča, zložljiv UFS, termoizolacija, naležna zadnja stena, pohodna steza z lestvijo, PVC zadnja ponjava, PVC rolo ponjava. Lsdpfx Aisy Dy Agocjac

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.350 kg, največja dovoljena obremenitev: 33.650 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.650 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje vozilo Fliegl po vaših zahtevah. Prikazano vozilo je primer. Proizvodnja in oprema sta individualno prilagojeni željam kupca. Dodatne informacije Podvozje polprikolice kiper Varjena konstrukcija iz finezrnatega jekla, v osnovni lahki izvedbi, sedelna plošča z zamenljivim 2" kraljevskim zatičem Patentiran ukrivljen prednji zaključek Telekopno podnožje na sredini, odklop prikolice s tovorom ni možen, v odklopljenem stanju mora vozilo stati nagnjeno nazaj. Klinasti podložki z nosilcem Zložljiva zaščita pred spodvajanjem Polovični blatniki Integrirani nosilec blatnika s površino, odporno na kamenje Palica za ponjavo z nosilcem Vlečna kljuka zadaj Preme in vzmetenje SAF osi z disk zavorami, premer diskov 430 mm Laserska meritev osi/podvozja za zmanjšanje obrabe pnevmatik in porabe goriva Osi v offroad izvedbi Zračno vzmetenje 1. os avtomatska dvižna os, vključno s prisilnim spuščanjem in pomočjo pri zagonu Vroče pocinkan mehanizem dvižne osi – 10 let garancije proti prerjavenju Zavorni sistem Dvocevni zračni zavorni sistem, barvno označene cevi za enostavno servisiranje Parkirna zavora s tlačnimi vzmetmi 2 varna priključna spoja spredaj, brez povezovalnih cevi EBS – elektronski zavorni sistem s priključkom spredaj, brez povezovalnega kabla Pozor: Priklopno vozilo sme vleči le vozilo, ki zagotavlja delovanje ABS! S funkcijo dviga in spuščanja ventila Sistem za stabilnost vožnje Kolesa in pnevmatike 385/65 R22.5 Jeklena platišča, tovarniško srebrna "RDKS" sistem za nadzor tlaka v pnevmatikah po ECE R 141, prikaz prek zaslona v vlačilcu (prek EBS, brez vgradnje v tovornjak – pogoj je zagotovljena funkcija v tovornjaku, velja samo za osnovno opremo pnevmatik) Elektrika 24 V, večkomorni žarometi, rumene LED stranske luči Rumene LED stranske luči povezane z utripalko (utripajoče stranske luči) 2 x 7-polni varni priključki spredaj, brez povezovalnega kabla Hidravlika Nizkotlačni cilindri max. 170 bar, najmanjša stopnja trdo kromirana, HDK navojna spojka, fiksni del, nazivni premer 48 mm (brez cevnih povezav) Upravljanje hidravlike prek pomožnega pogona tovornjaka Korito Jekleno polkrožno korito v dizajnu Stone Master iz zelo odpornega jekla HB 400/450. Poševna čelna stena z zunanjo hidravliko in dostopom na čelni steni. Greenline – konična in aerodinamična oblika korita Nosilec za lopato in metlo zunaj pri čelni steni Membranska zadnja stena Zadnja stena kot nihajna loputa z dvojno vzmetno spono, zunanja, z dvojnim kavljem. 2 vpenjalna vijaka z ročnimi zapirali spodaj stransko. Stranske stene neprekinjeno 4 mm, dno 4/5 mm debelo, konstrukcija optimizirana za obrabo in težo Delovni podest z dostopom, priključna plošča za zrak/elektriko in zavore z dovolj prostora za optimalno upravljanje Enostranska rolo ponjava za nalaganje na FR-desno, z centralnim zaklepanjem na FR-levo Registracijska država/tablice Nemčija Homologacija po EG 2007/46 Stabilnost nadgradnje po EN 12642 24/7 servisna linija Pripravljeno za enovrstni nosilec tablice Opozorilna tabla po ECE-70 Konturno označevanje z reflektivnimi trakovi po ECE R 048, stransko belo, zadaj rdeče Barvanje Ljdpfx Aji Ri Dpoicoac Okvir: DB 7350 Novasiva 10 let garancije proti prerjavenju Podporne noge: pocinkane Korito: v izbrani barvi RAL, enobarvno Rolo ponjava: RAL 7035 svetlo siva

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.400 kg, največja dovoljena obremenitev: 33.600 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 2.960 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, stanje pnevmatik: 100 odstotek, Rešitev za transport, prilagojena po meri Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta individualno prilagojeni željam stranke. Dodatne informacije Podvozje Varjena konstrukcija iz finezrnatega jekla, lahka izvedba, sedlasta plošča z izmenljivim 2-pinskim zatičem Patentiran zaobljen sprednji zaključek Teleskopska podpora na sredini, odpenjanje vozila pod obremenitvijo ni možno, v odpetem stanju mora vozilo stati nagnjeno nazaj. Zagozde za kolesa + nosilec Opozorilna zaščita proti podletu, zložljiva Polovični blatniki Integriran nosilec blatnika, površina odbijajoča kamenje Blatniški lopar za zadnjo os, asfaltna različica, s tečajem pritrjen na blatnik, možnost obešanja na zgornji del blatnika, blatnik skrajšan Vlečna kljuka zadaj Premi in vzmetenje SAF premi z diski in 430 mm premerom Lasermeritev osi/podvozja, zmanjšana obraba pnevmatik in poraba goriva Premi v offroad izvedbi Zračno vzmetenje 1. os samodejno dvižna, vključno s prisilnim spuščanjem in pomočjo pri speljevanju Pocinkan dvižni mehanizem osi Zavorni sistem 2-cevni tlačni zavorni sistem, barvno kodirane cevi za lažji servis Povratna vzmetna parkirna zavora 2 varnostni priključka spredaj, brez povezovalnih cevi EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Pozor: Prikolico sme vleči le vlečno vozilo, ki zagotavlja delovanje ABS! S funkcijo dviga in spusta Stabilizacijski sistem za varno vožnjo Kolesa & pnevmatike 385/65R22,5 Jekleni platišči, tovarniško srebrna 'RDKS' v skladu z ECE R141, prikaz na zaslonu vlečnega vozila preko EBS, brez vgradnje v tovornjak (pogojeno osnovnimi pnevmatikami). Elektrika 24 V, večkomorni žarometi, ob strani rumene LED luči povezane z utripalkami, "utripajoče bočne luči" 2 bele pozicijske luči spredaj 2 beli/rdeči markerji zadaj 2 x 7-polna varnostna vtičnika spredaj, brez povezovalnega kabla Hidravlika Visokotlačni valj max. 250 bar, z HDK spojko, fiksni del, NW 48 mm Hidravlično upravljanje preko priključka na vozilu Kiparska korita Jeklena okrogla korita Stone Master Design iz visoko odpornega jekla HB 400/450. Poševna čelna stena z zunanjim hidravličnim pogonom in stopnicami na sprednji strani. Membranska zadnja stena Zadnja stena kot nihajna vrata, zunanja z dvojnim priklepanjem. 2 vpenjalna vijaka z ročnim zapiranjem na spodnji strani. Stranske stene debeline 4 mm, dno 4/5 mm, konstrukcija optimizirana zaradi obrabe in teže, Korito izolirano, Fliegl Asphalt Profi Thermo, izolirano spredaj, ob strani, spodaj in zadaj s Fliegl Isotherm. Prevleka BASIC, platnena stranica Delovni podest + dostop, priključna plošča za zrak/elektriko in zavore z velikim prostim prostorom za optimalno upravljanje. Enostransko prekrivanje s ponjavo FR-desno, z centralnim zaklepom FR-levo Država registracije/tablice Nemčija Homologacija v skladu z EG 2007/46 Strukturna trdnost po EN 12642 24/7 servisna linija Certifikat proizvajalca za termo vozila po RS 10 - 2013 Pripravljeno za enovrstične nosilce tablic Opozorilna tabla po ECE-70 Barva Okvir: DB 7350 Nova siva "10 let garancije proti prerjavitvi" Lasdpfx Aji Rix Isicoc Podporne noge: pocinkane Korito/stranska ponjava: po RAL, enobarvno Prekrivna ponjava: RAL 7035 svetlo siva Termoizolacija na voljo tudi v BASICplus (kovinska obloga) in Premium (inox obloga)!

Stanje: rabljeno, največja dovoljena obremenitev: 30.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.750 mm, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.380 mm, Oprema: ABS, Fliegl DHKA 390 SDS01 30m³ Rear Tipper Aluminium Body Light 3-axle rear tipping semi-trailer with aluminium body Light, Type DHKA 390 • 30 m³ with drop-in rear tailgate, Greenline---### Aluminium Body Light / Aluminium Box Body ###--- Aluminium tipping body, Capacity: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Gross vehicle weight: 35,000 kg, Unladen weight: 4,800 kg, Payload: 30,200 kg, 1st axle liftable, Roll tarp, single-sided, stores on front-right, with central locking front-left, 2x LED working lights, rear, SAF axles, Steel stand platform with anti-slip grating and guardrail, Hard-chromed tipping cylinder, Rear underrun protection, foldable, 1x drop-leg support, Disc brakes, Broom and shovel holders mounted on front wall, Air suspension, Mechanical pendulum tailgate latch (2-hook locking), Pendulum tailgate/rear wall sealed with rubber gasket, Sideboard screw locks, 1x grain chute, 1x side locker, left, 1x front locker, Mudguards on all wheels, Cargo area dimensions (LxWxH): approx. 7,200 x 2,420 x 1,750 mm, Sidewall height: approx. 1,750 mm, Loading height: approx. 3,239 mm, External dimensions (LxWxH): approx. 8,600 x 2,550 x 3,340 mm, Wheelbase: 3,100 x 1,310 x 1,320 mm, Tyres: 385/65R 22.5 on aluminium rims, Tread depth, tyres left front: 14 mm, Tread depth, tyres left centre: 14 mm, Tread depth, tyres left rear: 4 mm, Tread depth, tyres right front: 12 mm, Tread depth, tyres right centre: 15 mm, Tread depth, tyres right rear: 12 mm, Tipping floor worn Additional equipment: Overall length: approx. 8,600 mm, Overall width: approx. 2,550 mm, Overall height: approx. 3,340 mm, Internal body height: approx. 1,750 mm, Capacity: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Neck height: approx. 190 mm, Kingpin mounting dimension: approx. 600 mm, Telescopic landing gear, central, Uncoupling with load not possible, trailer must stand inclined when uncoupled, Foldable underrun protection, Half-shell mudguards, Tarp bar with holder, Aluminium ladder approx. 3,550 mm with side holder, SAF disc-braked axles, Air suspension, 1st axle automatic lift axle, additionally electrically controlled from the truck, with traction aid, no truck installation required (traction aid operational up to axle overload of 30% and max. speed of 25 km/h), Spring-loaded parking brake, EBS, electronic braking system with EBS socket front, no connecting cable, Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Laedswr Ry Eepfx Aicec 24 volts, 4x3 chamber lamps + 1 round reversing lamp + 1 round rear fog light, all LED, 2 white position lights at the front, 1x 15-pin socket front, without connecting cable, Low-pressure cylinder max. 170 bar, with HDK screwed coupling, fixed part, NW 48 mm, Hard-chromed tipping cylinder, Body: Aluminium box body made of high-grade, wear-resistant material, Sloped front wall, 5 mm thick, With external cylinder mount, Side walls made of 30 mm hollow-chamber profiles, neatly welded, With bulk material repelling top rail profile, Greenline • conical and aerodynamic body shape, “membrane” rear wall, Rear wall as pendulum flap, external mounting with double hook locking, Rear wall with additional clamping screws at sides and bottom, Rear wall with rubber gasket, Note! Heat-resistant up to max. 170 °C! Central grain chute, Continuous floor 6 mm thick, Wear plates at the rear corners of the side walls,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.000 kg, največja dovoljena obremenitev: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, dolžina tovornega prostora: 7.630 mm, širina tovornega prostora: 2.335 mm, višina nakladalnega prostora: 1.570 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.945 mm, skupna širina: 2.533 mm, skupna višina: 3.164 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.310 mm, barva: srebrn, Leto izdelave: 2026, Oprema: ABS, NEW – 3-Axle Tipper Semi-Trailer – Steelpipe 25 m³ HARDOX 450 with External Tailgate Available immediately -- Brand-new vehicle Robust 3-axle tipper semi-trailer with highly wear-resistant HARDOX 450 body (25 m³), designed for demanding construction and bulk material applications. Available immediately and ready for use, the vehicle can be viewed and collected at any time in 07368 Eliasbrunn. Technical Data Body: • Internal dimensions: approx. 7,630 x 2,335 x 1,570 mm (L x W x H) • Body color: White aluminum RAL 9006 • Volume: approx. 25 m³ • Material: HARDOX 450 (floor 5mm thick & walls 4mm thick) • Tailgate: External tailgate • Chassis: Straight version, material MC700, black RAL 9005 • Unladen weight: approx. 6,150 kg Chassis & Axles: • SAF Intra-CD axles with disc brakes Ø 430 mm / ET 120 • 1st axle with automatic lift function • Pneumatic suspension with constant ride height • SAF steel landing legs • Chassis height: fifth wheel height 1,200 mm • Axle load: 9,000 kg Tyres & Rims: • 6x Bridgestone Duravis RT-2, 385/65 R22.5 • Steel rims Hydraulic System: • HYVA Short Cover high-pressure front cylinder (250 bar) • Hydraulic hose with quick coupling • Automatic lowering with switch on the chassis Braking System: • KNORR ABS/EBS system complies with UN/ECE R12.11 • Dual-circuit braking system, ADR compliant • Automatic brake force control Electrics & Lighting: • Aspöck Europoint III lighting, 24V • LED side marker lights • 1 white LED work lamp at the rear • 2x 7-pin and 1x 15-pin sockets Accessories & Equipment: • PVC rolling tarp 900g/m², silver, quick-release • Tarp quick-release • Platform with ladder (access on both sides) • Reisch trailer side skirt • Water tank • Side-mounted toolbox Ledpjy Ufwqefx Aicsac • 2 wheel chocks • Warning triangle, wheel nut wrench, pressure gauge Availability • Available immediately – viewing daily in 07368 Eliasbrunn • Delivery ex works 07368 Eliasbrunn

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024358, lastna masa: 6.149 kg, največja dovoljena obremenitev: 28.851 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: modra, The images shown are archive photos; the vehicle may still be in use! Chassis Semi-trailer Haulage Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin Outer frame slightly inclined with 'Load-Lock profile' for lashing strap attachment Note! To hook in the straps in conjunction with drop sides, the side walls must be opened! Pair of lashing eyes additionally flush-mounted in the outer frame, each rated to 2.5 t 24 t, two-speed landing gear, single-sided operation, with straight lower section, without compensating mechanism Pull-out ladder at rear Side door retainers Wheel chocks with holder Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free landing leg corner dimension or rearward swing clearance approx. 1930 mm Rear underrun protection, steel, galvanized Full-width rear mudflap Half-shell fenders With anti-spray mudflap only on the last axle Rear collision protection 'Blocker' – transverse galvanized steel angle as forklift and rear door hinge protection Pair of ferry rings, yellow marked Pallet stops on both sides, approx. 15–20 mm high, bolted design (loading height reduced by approx. 15–20 mm) Spare wheel holder for one spare wheel, complete with fixing kit, basket design by Schoch! Spare wheel, same make as original tyres, steel rim Stainless steel toolbox, w=600/h=400/d=500 mm, with polished, lockable door Stake pockets Right side: 5 rows of aluminium V-insert slats Left side: no insert slats Rear wall / Rear corner posts Rear corner posts steel, up to roof edge, lashing for tarpaulin with round tubes and tensioning ratchet Ljdpfjwyiw Esx Aicoac Rear portal doors, double-leaf, each with 2 internal bar locks Tarpaulin Tarpaulin with integrated horizontal and vertical belts Quick Lock system for side curtain with central locking, one-sided on left Tension locks in stainless steel on right duty-free cable all around, with holder on front wall (no customs lock, not in conjunction with Quick Lock) Customer branding on side curtains and rear portal Tarpaulin with high-strength built-in spring steel strips, left side (note: no insert slats on left when equipped) Roof Sliding roof, rear end lift-up, can be pushed open front-to-rear, tarpaulin colour: white EcoLift – lifting roof, raisable by approx. 380 mm on both sides, with gas strut assistance, Optimum rear rain rail, top of rear bow, above doors Paintwork Frame: hot-dip galvanized with passivation Landing legs: black coated Front corner posts: galvanized and painted to front wall colour Front wall: MB 5328 blue Rear corner posts: galvanized and painted to rear wall colour Rear wall: MB 5328 blue Tarpaulin: RAL 5010 gentian blue Pallet box lid: RAL 2011 deep orange The images shown are archive photos; the vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902031174, lastna masa: 5.835 kg, največja dovoljena obremenitev: 29.165 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2023, prostornina tovornega prostora: 50 m³, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, skupna višina: 3.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: siv, The photos provided are archive images. The vehicle may still be in use. Chassis Tipper Semi-Trailer Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall "patented" 24 ton, 2-speed landing gear, single-sided operation, with straight lower section, without push compensation 2x wheel chocks with holders Aluminium side underrun protection Foldable rear underrun protection 6x half-shell fenders Integrated "fender holder" with stone-repellent surface Tarp bar with holder 2x towing hooks at the rear Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Air suspension Lajdoy Efcuspfx Aicec 1st axle automatic lift axle, including forced lowering and starting aid, operated by "braking 3x" Braking System 2-line compressed air braking system Color coded lines for ease of service Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! With raise & lower valve Vehicle stability control system Wheels and Tires 6x 385/65 R22.5" 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Body Aluminium box body made from premium, wear-resistant material Inclined front wall, 5 mm thick, with external cylinder mount Side walls made from 30 mm hollow chamber profiles, cleanly welded, with top profile to prevent bulk material sticking. Internal ladder at the front wall Shovel and broom holder on the outside of the front wall Tailgate mounted on swing hinges with "double joint hinge" and 2-leaf design (1/2 to 1/2 split), equipped with upper swing frame and a grain chute per leaf Tailgate with rubber seal Continuous 6 mm thick floor Standing platform with ladder, connection plate for air/electrics and brakes. Roll tarp can be stowed on the right-hand side (FR-right), with central locking on the left (FR-left) Operating Instructions For transporting salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and rust caused by the cargo. The stated gross weight is technically possible. Depending on the load, the actual permissible gross weight may not be achieved due to axle and support load limits. (Poor driving and trailing behavior possible due to incorrect load distribution) Note! Not suitable for chemically aggressive substances (e.g. acids, chlorine compounds, sulfur compounds, "alternative fuels"); Such media, especially with moist contact to the body, can cause stress corrosion cracking and lead to severe cracks in the body structure! Vehicles with load bodies are designed for non-chemically aggressive cargoes. Using them for transporting aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, or household waste is at your own risk. This can result in stress corrosion cracking or pitting. The provided images are archive photos!

Stanje: rabljeno, številka stroja/vozila: WFDFLT33902030053, lastna masa: 5.835 kg, največja dovoljena obremenitev: 29.165 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, prostornina tovornega prostora: 50 m³, skupna dolžina: 11.200 mm, skupna širina: 2.550 mm, skupna višina: 3.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: siv, The images are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction, lightweight basic design, fifth wheel plate with replaceable 2" kingpin Patented curved front wall 24 t, 2-speed landing gear, single-sided operation, straight base, without compensating device Foldable underrun protection Axles and Suspension 3x BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser alignment" to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, operated via "3x brake" function (traction aid operable up to a 30% axle load exceedance and up to a max. speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking System Ledey Edtfopfx Aiceac 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lifting & lowering valve Vehicle stability control system Wheels and Tires 6x 385/65 R22.5" tires 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 x 7-pin non-interchangeable sockets at the front, without connecting cable, electrical system not fully functional. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed section, NW 48 mm. (without hose connection) Body Aluminum box body made of high-quality, abrasion-resistant material. Inclined front wall, 5 mm thick, with external cylinder mounting. Side walls made of 30 mm hollow chamber profiles, neatly welded, with top rail profile for preventing bulk material accumulation. Interior with access steps on front wall (not compatible with Cramaro). Shovel and broom holder externally on front wall. Greenline - conical and aerodynamic body shape "Membrane" - tailgate Tailgate mounted on oscillating hinges with "double joint hinge" and 2-wing split (1/2 to 1/2), top with swing bracket, one grain chute per door. Floor continuous, 6 mm thick Standing platform with access, mounting plate for air/electrics and brake with large clearance for optimal operability. Roll tarp stows to right side (FR-right), with central locking on FR-left Operating Instructions For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material ingress and corrosion. The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable within the permissible axle, support, and fifth wheel loads. Note! Not suitable for chemically aggressive media (e.g., acids, chlorine compounds, sulfur compounds, "alternative fuels"); such media can cause stress corrosion cracking and severe cracking of the body if combined with a moist surface! Vehicles with loading bodies are intended for non-chemically aggressive cargo. Use for transporting aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and domestic waste is at the user's own risk. This may cause damage due to stress corrosion cracking or pitting. The images are archive photos. The vehicle may still be in use.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014232, lastna masa: 5.900 kg, največja dovoljena obremenitev: 29.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 13.650 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.638 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, The images are archive photos! The vehicle may still be in use! Chassis: Semitrailer for Freight Forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" king pin Drive-over and suitable for use with construction/agricultural machinery up to max. 24,000 kg GVW and up to a maximum machinery width of 2480 mm (the track width of machines or vehicles to be transported must not exceed 2200 mm), hook-in bar for aluminium ramps at the rear (wider construction/agricultural machinery must not be loaded) Outer frame in new slightly angled design with "Load-Lock Profile" for lashing strap attachment 14 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t 6 pairs of recessed lashing rings in the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-sided operation, with straight base, without crossbar equalizer Free landing gear foot dimension or free swing radius to the rear approx. 1920 mm Rear support foldable 2x wheel chocks with holder Side underrun protection aluminium Rear underrun protection steel Quarter mudguards in front of and behind each axle With anti-spray splash guards behind each axle 1x spare wheel holder for 1 spare wheel, with fixing kit 1x spare wheel, same make as standard tires, steel rim Axles + Suspension SAF drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, additionally electronically controllable from the truck, incl. forced lowering and starting aid, no installation required on the truck (starting aid functions up to an axle overload of 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded piping for easy maintenance Spring-actuated parking brake 2 foolproof coupling heads front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Important: The drawbar trailer may only be towed by tractor units that ensure the effectiveness of ABS! With lift & lower valve Vehicle - Driving Stability System "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via tractor unit's screen via EBS, no truck installation (requirement must be met by the tractor unit. Only for standard tires) Wheels and Tires 235/75 R17.5 twin tires Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side amber LED lighting Side amber LED lighting connected to indicators "flashing side markers" 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front, without connecting cable Floor Phenolic plywood panels approx. 30 mm thick, for high point load capacity, forklift axle load up to max. 5,600 kg Front wall / Front corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner stanchions steel, volume design Front wall additionally covered on inside with 1,250 mm high phenolic plywood panel Frame hot-dip galvanised Ledpfx Aiexb D Swecjac The images are archive photos! The vehicle may still be in use!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902036561, lastna masa: 5.820 kg, največja dovoljena obremenitev: 29.180 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rdeča, The images are sample/archival pictures! The vehicle may currently be in use! Tarp color freely selectable Chassis: Semi-Trailer Forwarder Fine-grained steel welded construction in lightweight design, fifth wheel plate with exchangeable 2" kingpin Slightly angled new design outer frame with "Load-Lock profile" for lashing strap attachment 3 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 14 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 24 t 2-speed landing gear, one-sided operation, with straight base, load equalizing type: SAF Note: Free landing gear foot spacing or free rear swing radius approx. 1930 mm Extendable rear ladder Side door holders 2 wheel chocks with holders Side underrun protection, aluminum Painted in RAL 3002 Carmine Red No warranty for coating/lacquering quality on repainted or coated attachments. Rear underrun protection, galvanized steel Painted in RAL 9010 Pure White, including rear underrun protection brackets No warranty for coating/lacquering quality on repainted or coated attachments. Quarter shell mudguards in front of and behind axle assembly With anti-spray mudflaps according to EU regulations Rear crash protection 1 aluminum ladder approx. 2550 mm, with side holder, behind side underrun protection Mounting rail on outer frame for direct tarp tensioners, bolted design, stands approx. 15–20 mm above loading surface, upper section with perforated profile for lashing straps, load-lock side rail must remain usable (since no lashing eyes). With bottom aluminum drop-in slat usable as stopper! (not in conjunction with sideboards) 2 plastic toolboxes, w = 800 / h = 450 / d = 450 mm 1 each on front left and right, behind the 3rd axle Axles & Suspension BPW disc brake axles with 430 mm disc diameter Wheel hubs painted in RAL 3002 Carmine Red "Axle/chassis laser alignment" to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connector line 24 Volt EBS, manufacturer Wabco, electronic brake system with EBS socket at the front, without connection cable Attention: This trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lift & lower valve + auto-reset function Vehicle stability control system Telematics Idem Telemetry incl. LIN battery, coupling sensor and GPS (no contract included, customer must arrange contract). Lasdpfx Aijxbzkkjcjc Wheels & Tires 385/65 R22.5, manufacturer as selected by the supplier Polished aluminum rim, make Alcoa Dura-Bright Electrics 24 Volt, multi-chamber lighting units, side yellow LED lighting Lamp carrier painted in RAL 9010 Pure White No warranty for coating/lacquering quality on repainted or coated attachments. 2 white marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connector cable LED working lights on both sides (controlled via reverse light), positioned at height of first cross-member behind landing gear 2 additional LED working lights at the rear, controlled via reverse light Tarp Tarp with welded horizontal and vertical belts Customer branding possible on tail portal, tarp color freely selectable

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902028859, lastna masa: 5.660 kg, največja dovoljena obremenitev: 29.340 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, Chassis Semi-Trailer for Freight Forwarding Steel welded construction in reinforced design, only two longitudinal beams as double T-beams with steel/checker plate between the beams. Fifth wheel plate with replaceable 2" king pin. Protective cover for rear lights. 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer’s choice. 24 t two-speed landing gear, single-sided operation, with straight base, without compensating leg. Wheel chocks with holders. Side underrun protection in aluminium. Rear underrun protection in galvanized steel. Half-shell mudguards with anti-spray flaps according to EC specifications. 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit. 1 toolbox recessed between the longitudinal beams. 8 wooden stake pockets, as per manufacturer’s preference, bolted onto the frame, each with 2 telescopic wooden stakes adjustable from 1800 mm to 2800 mm, 7 t per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift & lower valve, axle safety cables. First axle with automatic lift, incl. forced lowering and start assist, activated by “3x brake” (start assist functions up to 30% axle overload and up to 25 km/h). Axle spacing offset 1410/1310 mm (suitable for combined transport) up to 44 t gross train weight. Wheels and Tyres 385/65 R 22.5" Manufacturer’s choice. Steel rims, factory silver. Brake System 2-line compressed air brake system. Spring-type parking brake. Axle load detection via EBS CAN-bus signal for display in truck cab (truck must be equipped accordingly, no truck installation, not a verified scale). 2 front coupling heads, non-interchangeable, without connection line. EBS (Electronic Braking System) with front EBS socket, without connecting cable. Note: The trailer may only be towed by tractors that can guarantee ABS effectiveness! “Safe Parking.” Electrical System 24 Volt, multi-chamber tail lights, side LED marker lamps in yellow. 2 white position lamps front. 2 white/red lane-control lamps rear. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cables. Front Bulkhead/Corners Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame. Approval / Signage Registration country: Germany Type approval according to EC 2007/46 Prepared for single-row license plate holder Contour marking with reflective tape per ECE R 048, white on sides, red at rear Warning sign per ECE-70 Paintwork Frame: DB 7350 Novagrau Landing gear legs: black coated Bulkhead: hot-dip galvanized Lsdpfx Aisza Anvscjac

Stanje: novo, največja dovoljena obremenitev: 28.760 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear fenders and manual paver switch ---- Axles: * 3 x 9-ton BPW axles * 1st axle liftable with start-off aid ---- Suspension: * Air suspension with automatic lowering during the tipping process (for increased stability; can be deactivated for pavers) ---- Electrical / Lighting: * 1 x 15-pin trailer socket * LED rear lights * 1 x additional LED work light * Flashing side marker lights * Tire Pressure Monitoring System (TPMS) ---- General fittings: * Aluminum air tanks * Jost telescopic steel landing legs with plate foot (can be unhitched only when unladen) * 4 m aluminum access ladder, stored laterally right above the fenders * Closed individual plastic fenders * 4 m aluminum access ladder, stored above the fenders * Folding underrun protection * Rear towing eye * Access steps and external aluminum standing platform in front of the front wall ---- Frame: * Chassis made of high-strength fine-grain steel with Meiller-specific torsion cross members ---- Tipping body: * Half-shell rear tipping steel body (front-mounted hydraulic cylinder with medium working pressure) * Side walls with robust continuous inward-sloped top rail * Superimposed tailgate with rubber seal and 2 additional toggle fasteners as well as automatic 2-hook locking system ---- Thickness of base, side walls, front and rear wall: * Front and rear wall slanted * Front wall: 4 mm BS 70 steel * Side walls and tailgate: 4 mm HBW 450 steel * Tailored floor made of 5 / 6 mm HBW 450 steel ---- Tarpaulin: * Manual rolling tarpaulin - RAL 9006 white aluminum ---- Loading volume: * Approx. 25 m³ Laodpfsuqtcdsx Aicec ---- Fifth wheel height: * Unladen approx. 1,247 mm * Laden approx. 1,217 mm ---- Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminum ---- General information: * --Permissible total weight technically up to 39,000 kg-- * Errors and prior sale excepted * New vehicle with manufacturer warranty ---- Delivery time: * Available from week 32/2026

Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes. Laodpfx Astcwmisicjc

Stanje: novo, največja dovoljena obremenitev: 28.600 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Braking System: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW or SAF axles * Lifting axle with start-up aid ----Suspension: Ledpfow Eg D Tjx Aiceac * Air suspension with automatic lowering during tipping process (to increase stability, can be deactivated for paver operation) ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective housing * 1 x additional LED work light * Flashing side marker lights ----General Attachments: * Aluminium air tanks * Telescopic steel landing legs with plate foot (can only be uncoupled when unladen) * 4 m aluminium access ladder, positioned to the right side above the mudguards * Enclosed individual plastic mudguards * Folding underrun protection * Tow eye at the rear * Folding access ladder on the front left side * Document box on the front wall ----Chassis: * High chassis frame made of high-strength fine-grain steel with Meiller-specific torsion cross members ----Tipping Body: * Half-shell rear tipper body made of STEELECT 450 steel -HBW 450- * Front hydraulic cylinder with medium working pressure * Front wall with 600 mm front roof as tarpaulin carrier * Side walls with sturdy, continuous, inward-sloping top rail * Overlapping tailgate with rubber seal, 2 additional toggle locks and automatic 2-hook locking ----Thickness of Floor, Side Walls, Front and Rear Wall: * Front, side and rear wall 4 mm * Front and rear wall inclined * Tailored floor 5 / 6 mm ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminium- with manual switch on chassis and radio remote control ----Payload Volume: * Approx. 25 m³ ----Coupling Height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminium ----General Attachments: * --Technically feasible gross vehicle weight of 39,000 kg-- * Errors and prior sale excepted * New vehicle with manufacturer warranty ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 55 kg, največja dovoljena obremenitev: 33.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.410 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r22.5, stanje pnevmatik: 100 odstotek, Dodatne informacije Podvozje Vario iz finezrnatega jekla, varjena konstrukcija lahke izvedbe, sedelna plošča z izmenljivima 2 kraljevska zatiča Patentiran ukrivljen prednji zaključek Teleskopska sredinska podporna noga, razklop s tovorom ni možen; ko je prikolica razklopljena, mora vozilo stati nagnjeno nazaj. Zagozde + nosilec Preklopna zaščita proti podvozu Polovični blatniki Integrirani nosilec blatnika z zaščito proti kamenjem Brizgalne zavese za zadnjo osjo, asfaltna izvedba, s tečajem pritrjene na blatniku, možnost obešanja zgoraj na blatnik, zadnji blatnik skrajšan Vlečna kljuka zadaj Premne in vzmetenje SAF bobnaste osi Laserjsko merjeno vzmetenje/podvozje – zmanjšana obraba pnevmatik in poraba goriva Osi v terenski izvedbi Zračno vzmetenje 1. os avtomatska dvižna os, vklj. s prisilnim spuščanjem in pomagalom pri speljevanju, upravljanje s 3-kratnim zaviranjem (funkcija pomagala pri speljevanju do prekoračitve osne obremenitve za 30 % in hitrosti do največ 25 km/h) Pocinkan mehanizem dvižne osi Zavorni sistem Dvokrožni zračni zavorni sistem, barvno označene cevi za lažji servis Vzmetna parkirna zavora 2 napeljavi zaščiteni priključni glavi spredaj, brez priključne cevi EBS - elektronski zavorni sistem z vtičnico spredaj, brez kabla Pozor: priklopno vozilo sme vleči le vlečno vozilo z zagotovljeno funkcijo ABS! Z ventilom za dvig in spust Sistem stabilnosti vozila Kolesa in pnevmatike 385/65R22,5 – proizvajalec po izbiri Jeklena platišča, tovarniško srebrna Električna napeljava 24 V, večkomorni žarometi, stranska rumena LED osvetlitev 2 beli pozicijski luči spredaj 2 belo/rdeči označevalni lučki zadaj 2 x 7-polni zaščiteni vtičnici spredaj, brez kabla Hidravlika Visokotlačni cilinder maks. 250 bar, s HDK vijak spojko, togi del, NW 48 mm (brez cevne povezave) Hidravlično upravljanje preko dodatnega pogona tovornjaka Korito Jeklena okrogla korita v Stone Master dizajnu iz visoko obrabno odpornega jekla HB 400/450. Poševna prednja stena z zunanjim hidravličnim pogonom in vzpon na prednji strani. Membranska zadnja stena Zadnja stena kot nihajna loputa, zunanja, z dvojno kaveljsko zaporo. Dva vpenjalna vijaka s ročnimi zapirali spodaj ob straneh. Stranske stene neprekinjeno 4 mm debele, dno 4/5 mm debelo, konstrukcija optimizirana za obrabo in težo, Korito izolirana izvedba, Fliegl Asphalt Profi Thermo, korito spredaj, ob straneh, spodaj in zadaj izolirano s Fliegl Isotherm. Prekritev BASIC, ponjava Laedpfei Rix Sjx Aicec Delovni podest z vzponom, priklopna plošča za zrak/elektriko in zavore z veliko prostora za optimalno upravljanje. Navojna ponjava enostransko odlaganje na desno (FR), centralno zapiranje na levo (FR). Navodila za uporabo Pri prevozu soli, apna itd. priporočamo kiperski cilinder s trdo kromirano batnico za zaščito pred rjo. Navedena skupna masa je tehnično možna; glede na vrsto tovora lahko skupna masa ob upoštevanju dovoljenih osnih/podpornih in sedelnih obremenitev ni dosežena. (Nepravilno razporejena teža lahko povzroči slabe vozne lastnosti.) Država registracije/Tablice Nemčija z Dekra potrditvijo in oceno (po §13 EG – FGV) Konstrukcijska trdnost v skladu z EN 12642 24/7 servisna linija Certifikat proizvajalca za termo vozila v skladu z RS 10 – 2013 Pripravljeno za enovrstično tablico Obrisna označba

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 5.700 kg, največja dovoljena obremenitev: 33.300 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.700 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 31 m³, skupna dolžina: 9.090 mm, skupna širina: 2.550 mm, skupna višina: 3.110 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema potekata individualno po željah stranke. Dodatne informacije Podvozje: polosni prekucnik Varjena konstrukcija iz drobnozrnatega jekla, osnovna lahka gradnja, sedelna plošča z zamenljivim 2" kraljevskim zatičem Patentiran ukrivljen sprednji zaključek Podporna noga 24 t, 2-stopenjska, enostransko upravljanje, ravno spodnje ohišje, brez izravnave potiska Klinasti podstavki s pritrjevalcem Zložljiva zaščita proti podletu Polovični blatniki Integrirani nosilec blatnikov s površino, ki odbija kamenje Zavesa proti pršenju le na zadnji osi Palica za ponjavo z nosilcem Vlečna kljuka zadaj Premi in vzmetenje BPW premne z disk zavorami, 430 mm premer Lasersko merjeno podvozje za zmanjšanje obrabe pnevmatik in porabe goriva Laedsi Rivdopfx Aicec Zračno vzmetenje 1. os: avtomatska dvižna os, vključuje prisilno spuščanje in pomoč pri speljevanju Pocinkan mehanizem dvižne osi, 10 let garancije proti predrjavenju Zavorni sistem 2-cevni tlačnozračni zavorni sistem, barvne cevi za lažje servisiranje Vzmetna parkirna zavora 2 varna priključna spoja spredaj, brez povezovalnih cevi EBS – elektronski zavorni sistem s priključkom spredaj, brez povezovalnega kabla POZOR: Prikolico sme vleči le vlečno vozilo, ki zagotavlja delovanje ABS-a! S funkcijo dviga & spuščanja ventila Sistem stabilnosti vozila med vožnjo Kolesa in pnevmatike 385/65 R22.5 Jeklena platišča, tovarniško srebrna RDKS sistem nadzora tlaka v pnevmatikah po ECE R 141, prikaz na zaslonu vlečnega vozila prek EBS, brez vgradnje v tovornjak (potrebna predpriprava v tovornjaku, le za osnovno opremo). Elektrika 24 voltov, večkomorni žarometi, rumena LED stranska osvetlitev Rumena LED stranska osvetlitev, povezana z smerokazi "utripajoče stranske luči" 2 x 7-polni varni vtiči spredaj, brez povezovalnega kabla Hidravlika Nizkotlačni cilinder maks. 170 bar, najmanjša stopnja trdo kromiran, s HDK vijačno spojko, fiksni del, NW 48 mm (brez hidravlične cevi) Upravljanje hidravlično prek PTO tovornjaka Korita Jeklena okrogla korita v "Stone Master Design" iz visoko odpornega jekla HB 400/450. Poševna sprednja stena z zunanjim hidravličnim cilindrom. Notranjost z dostopom na sprednji steni. Greenline – stožčasta in aerodinamična oblika korita Nosilec lopate in metle zunaj na sprednji steni Membranska zadnja stena Zadnja stena kot nihajoča loputa z dvojnim tečajem, zunanji nosilec z dvojnim kavljastim zapiralom. 2 vijačna zapirala s čepom spodaj ob strani. Stranske stene povsod debeline 4 mm, dno 4/5 mm, konstrukcija optimizirana za obrabo in težo. Stoječa ploščad z dostopom, priključna plošča za zrak/elektriko in zavoro z veliko prostostjo za lažje upravljanje. Rollponjava za odlaganje na FR-desno, centralno zapiranje na FR-levo. Registracija/oznake Nemčija Preverjanje skladnosti po EG 2007/46 Trdnost nadgradnje po EN 12642 24/7 servisna telefonska podpora Pripravljeno za enovrstični nosilec tablice Opozorilna tabla po ECE-70 Obrisna označitev z odsevnimi trakovi po ECE R 048, ob strani bela in zadaj rdeča Barvanje Okvir – DB 7350 nova siva "10 let garancije proti predrjavenju" Podporna noga - črna prevleka Korito – RAL po izbiri, enobarvno Rollponjava – RAL 7035 svetlo siva

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.200 kg, največja dovoljena obremenitev: 33.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.110 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 100 odstotek, Rešitev za transport po meri Konfigurirajte svoje vozilo Fliegl po vaših zahtevah. Prikazano vozilo je primer. Proizvodnja in oprema sta individualno prilagojeni željam strank. Dodatne informacije Podvozje polpriklopnika kiperja Varjena konstrukcija iz finega zrnatega jekla, v osnovni lahki izvedbi, sedelna plošča z zamenljivim 2. kraljevim zatičem Ukrobljen, patentiran sprednji zaključek Teleskopska podpora na sredini, snemanje s tovorom ni možno, v odklopljenem stanju mora vozilo stati nagnjeno nazaj. Laedpsi Ri A Iefx Aicjc Podložne zagozde z nosilcem Zložljiva stranska zaščita proti podvozu Polovični blatniki Integriran nosilec blatnika, površina odbija kamenje Palica za cerado z nosilcem Vlečna kljuka zadaj Osi in vzmetenje SAF diskaste zavore z 430 mm premera diska Laser-merjanje osi/podvozja – zmanjšanje obrabe pnevmatik in porabe goriva Osi v offroad izvedbi Zračno vzmetenje 1. os avtomatska dvižna os, vključno s prisilnim spustom in pomočjo pri speljevanju Pocinkan mehanizem dvižne osi – 10 let jamstva proti predrji Zavorni sistem Dvovodni pnevmatski zavorni sistem, barvna napeljava za lažje servisiranje Zavorni zasilni zavorni cilinder 2 nezamenljivi priključni glavi spredaj, brez povezovalnega voda EBS, elektronski zavorni sistem s vtičnico spredaj, brez kabla Pozor: priklopno vozilo lahko vleče samo vlečno vozilo, ki zagotavlja delovanje ABS! Z dvižnim/spustnim ventilom Sistem stabilnosti vožnje vozila Kolesa in pnevmatike 385/65 R22.5 Jeklena platišča, tovarniško srebrna Sistem za nadzor tlaka v pnevmatikah "RDKS" po ECE R 141, prikaz na zaslonu vlečnega vozila preko EBS, brez vgradnje v tovornjak (potrebni pogoji na tovornjaku, samo za osnovne pnevmatike) Elektrika 24V, večkomorni žarometi, stranske rumene LED luči Stranske rumene LED luči povezane z utripalkami 2 bele pozicijske luči spredaj 2 belo/rdeča svetila za sledenje zadaj 2 x 7-polni nezamenljivi vtikači spredaj, brez kabla Hidravlika Nizkotlačni valj, max. 170 bar, najmanjša stopnja trdo kromirana, z HDK vijačno spojko, fiksni del, nazivni premer 48 mm (brez cevi) Delovanje hidravlike preko dodatnega pogona na tovornjaku Korita Jekleno okroglo korito v Stone Master izvedbi iz zelo obraboodpornega jekla HB 400/450. Poševna sprednja stena z zunanjim hidravličnim motorjem; stopnice na sprednji steni. Greenline – konična in aerodinamična oblika korita Nosilec za lopato in metlo zunaj na sprednji steni Membranska zadnja stena Zadnja stena kot nihajna loputa z dvojnim tečajem, zunanja z dvojno kljuko. 2 objemni vijaki s krilnimi maticami spodaj ob strani. Stranske stene 4 mm, dno 4/5 mm, konstrukcija optimizirana proti obrabi in teži Stopna ploščad s stopnicami in priklopno ploščo za zrak/elektriko in zavoro, z veliko prostora za najboljšo uporabnost Premična rolo cerada, odlaganje na desni strani, centralno zaklepanje levo Država homologacije / Tablice Nemčija Certifikat skladnosti po EG 2007/46 Stabilnost nadgradnje po EN 12642 24/7 servisna telefonska številka Pripravljeno za enovrstno tablico Opozorilna tabla po ECE-70 Označba obrisa z odsevnimi trakovi po ECE R 048, ob strani bela in zadaj rdeča Barva Okvir: DB 7350 novosiva "10 let garancije proti predrji" Podporne noge: pocinkane Korito: po naročilu, enobarvno RAL Rolo cerada: RAL 7035 svetlo siva

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 6.750 kg, največja dovoljena obremenitev: 32.250 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.950 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 50 m³, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, skupna višina: 3.670 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Rešitev prevoza po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema se izvajata individualno po želji kupca. Dodatne informacije Šasija polprikolice kiper Izjemno fina zrnata jeklena varjena konstrukcija, v osnovni lahki izvedbi, sedelna plošča z zamenljivim kraljevskim zatičem številka 2 Patentan zaobljen sprednji zaključek 24 t, dvorazredni podporni vitel, enostransko upravljanje, z ravnim spodnjim delom, brez kompenzacije pomika Zagozde za kolesa s pritrjevalnikom Preklopna zaščita proti naletu od zadaj Pol-lupinski blatniki Integriran nosilec blatnika z zaščiteno površino proti kamenju Palica za cerado z držalom Vlečna kljuka zadaj Premi in vzmetenje BPW preme z diski s premerom 430 mm Osna/nosilna konstrukcija merjena z laserjem za zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje 1. os samodejna dvižna os, vključno s prisilnim spuščanjem in pomočjo pri izstavi Vroče cinkan dvižni mehanizem za os z 10-letno garancijo proti prerjavenju Zavorni sistem 2-vodni pnevmatski zavorni sistem, barvno označene cevi za lažje servisiranje Parkirna zavora z vzmetno posodo 2 varni priključni glavi spredaj, brez povezovalne cevi EBS (elektronski zavorni sistem) z vtičnico spredaj, brez povezovalnega kabla Pozor: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja učinkovitost ABS! Z dvigalnim in spustnim ventilom Sistem za stabilnost vožnje vozila Kolesa in pnevmatike 385/65 R22,5 Jeklena platišča, tovarniško srebrna Sistem za nadzor tlaka v pnevmatikah "RDKS" v skladu z ECE R 141, prikaz na zaslonu v vlečnem vozilu, preko EBS, brez vgradnje v LKW (pogoj: predpriprava v LKW, uporabno samo za osnovno obutev). Elektrika 24 V, večkomorni žarometi, stranske rumene LED luči Stranske rumene LED luči povezane z utripalniki "utripajoče stranske luči" 2 x 7-polne varnostne vtičnice spredaj, brez povezovalnih kablov Hidravlika Nizkotlačni cilinder maks. 170 bar, najmanjša stopnja trdo kromirana, s HDK navojno spojko, fiksni del, NW 48 mm (brez cevi) Upravljanje hidravlike preko pomožnega pogona tovornjaka Korito Jekleno korito iz visoko odpornega HB 400 jekla, poševna sprednja stena z zunanjim nosilcem hidravličnega cilindra. Nosilci za lopato in metlo na zunanji strani sprednje stene. Notranja stran: dostop ob sprednji steni. Stranske stene enotne debeline 3 mm, dno enotne debeline 3 mm Membranska zadnja stena Notranja širina spodaj cca 1440 mm Zadnja stena iz aluminija, nihajno nameščena z "dvojno tečajno spono" in z dvokrilnimi vrati delitev 1/2 do 1/2, zgoraj z vrtljivim nosilcem, vsak vrata s polžastim drsnikom. Stoječa platforma z dostopom, priključna plošča za zrak/elektriko in zavore z velikim delovnim prostorom za najboljšo uporabnost. Prekrivna cerada s stranskim odlaganjem na FR-desno, z centralnim zaklepanjem na FR-levo Registracijska država / tablice Nemčija Homologacija po EG 2007/46 Statična odpornost skladno z EN 12642 24/7 servisna linija Pripravljeno za enovrstični nosilec registrske tablice Opozorilna tabla po ECE-70 Obrisna označba z odsevnimi trakovi po ECE R 048, ob strani bela in zadaj rdeča Barvanje Okvir: DB 7350 Novagrau "10 let garancije proti predrjavenju" Lajdpfxsi Rizfo Aicoc Korito: RAL po želji, enobarvno Prekrivna cerada: RAL 7035 svetlo siva

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 7.900 kg, največja dovoljena obremenitev: 31.100 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1.950 mm, prostornina tovornega prostora: 50 m³, skupna dolžina: 11.200 mm, skupna širina: 2.550 mm, skupna višina: 3.470 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, Rešitev po meri za prevoz Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema potekata individualno po željah strank. Dodatne informacije Podvozje polpriklopnika – kiper Ledpfxoi Rizqo Aicsac Konstrukcija iz finezrnatega jekla, varjena, lahka izvedba z rahlim upogibom okvirja, sedelna plošča z zamenljivim 2" kraljevskim čepom 24 t, dvostopenjska podporna noga z enostranskim upravljanjem in ravnim spodnjim delom, brez kompenzacije premika Zagozde za blokiranje s pritrjevalci Zložljiva podvozna zaščita Polovične blatnike Integriran nosilec blatnika, površina odporna na kamenje Držalo za palico cerade Vlečna kljuka zadaj Premi in vzmetenje BPW premi z disk zavorami, premer diska 430 mm Premi/podvozje lasersko izmerjeno za zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje 1. os: avtomatska dvižna os z prisilnim spuščanjem in pomočjo pri speljevanju Vroče pocinkan dvižni mehanizem – 10 let garancije proti prerjavenju Zavorni sistem Dvocevni zračni zavorni sistem z barvno označenimi cevmi za lažje servisiranje Vzmetna parkirna zavora 2 varna priključka spredaj, brez povezovalnih cevi EBS, elektronski zavorni sistem s priključkom EBS spredaj, brez priključnega kabla Pozor: Prikolica se sme vleči le z vlačilci, ki zagotavljajo delovanje ABS! S funkcijo dviga & spuščanja Stabilizacijski sistem vozila Kolesa in pnevmatike 385/65 R22.5 Jekleni platišči, tovarniško srebrne Sistem za nadzor tlaka v pnevmatikah "RDKS" po ECE R 141, prikaz na prikazovalniku v vlačilcu prek EBS, brez vgradnje v tovornjak (pogoj: mora biti predpripravljeno v tovornjaku, le za osnovne pnevmatike) Elektrika 24 V, večkomorni žarometi, stranske rumene LED luči Stranske rumene LED luči povezane s smernikom za utripajoče stransko označevanje 2 bele pozicijske luči spredaj 2 beli/rdeči črtači zadaj 2 x 7-polni varni vtičnici spredaj, brez povezovalnih kablov Hidravlika Nizkotlačni cilinder max. 170 bar, najmanjša faza trdo kromirana, s HDK vijčnimi spojkami, fiksni del, NW 48 mm (brez hidravličnih cevi) Upravljanje hidravlike preko priklopa na tovornjak Keson Jekleni keson iz zelo odpornega HB 400 jekla, poševna prednja stena z zunanjim hidravličnim cilinderjem. Zložljivi alu ščitnik na desni za rolo ponjavo. Nosilec za lopato in metlo zunaj na prednji steni. Notranji dostop na prednji steni. Stranske stene neprekinjene, debeline 4 mm, dno 5 mm Membranska zadnja stena Zadnja stena s 2-krilnim vratom 1/2 na 1/2, z enim drsnikom v desnem krilu. Zunanje vrtljive palice za zapiranje in mehanski spodnji zaklep Podest z dostopom, povezovalna plošča za zrak/elektriko in zavoro z velikim prostim prostorom za optimalno upravljanje Rolo ponjava s shrambo na desni, centralno zaklepanje na levi Registracija/Tablice Nemčija Certifikat po EG 2007/46 Trdnost nadgradnje po EN 12642 24/7 servisna linija Priprava za enovrstično držalo tablice Opozorilna tabla po ECE-70 Označba s trakom po ECE R 048, stranice belo, zadnja stran rdeča Barvanje Okvir DB 7350 Novasivo 10 let garancije proti prerjavenju Podporne noge – črno lakirane Keson – po želji po RAL, enobarvno Rolo ponjava – RAL 7035 svetlo siva

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902035293, lastna masa: 5.663 kg, največja dovoljena obremenitev: 29.337 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.310 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: modra, zavoro prikolice: prikolica s zavoro, These images are for illustration purposes only (archive images) // Multiple units available! // The vehicle is currently in transit! Chassis: Tipper semi-trailer frame Basic lightweight design, fifth wheel plate with replaceable 2" kingpin, Curved front wall (patented) Central telescopic support leg, uncoupling when loaded not possible; when uncoupled, vehicle must be parked on a rearward incline. 2 wheel chocks with holders Lsdjyux H Dopfx Aiceac Foldable underrun protection Underrun protection with spring assist for easier operation 6 half-shell mudguards Integrated mudguard holder, stone-repellent surface Splash flaps behind the last axle, asphalt version, mounted on hinges on the mudguard, can be hooked to the top of the mudguard, shortened mudguard Tarpaulin support rod with holder 2 rear tow hooks Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift (controllable also electrically from the truck), including forced lowering and start assist, no truck installation required Galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system Color-coded lines for easy service Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connection line 24V EBS (Electronic Braking System) with EBS socket at the front, no connection cable With lift/lower valve Vehicle Stability Control System Ready brake, can be controlled electrically from the truck, no truck installation required Automatic tip lowering with shut-off valve Trailer Info Module for vehicle data display Axle load detection via EBS CAN bus signal Wheels & Tires 385/65 R22.5" brand at manufacturer's choice Polished aluminum rims Wheel nut protection caps Electrics 24V, multi-chamber lights, yellow LED side markers 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, no connection cables LED work lights mounted on both sides Additional integrated LED work lights at rear Hydraulics High-pressure cylinder (max. 250 bar), lowest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm Operated hydraulically via truck PTO Body (Tipper) Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Angled front wall with external cylinder mount. Interior with ladder on front wall External shovel and broom holder on front wall "Membrane" tailgate Tailgate as pendulum flap, external, with double hook locking. 2 clamp screws with lever locks at lower sides. Holder for pendulum tailgate—can be hooked into the clamp screws Central grain chute Fliegl S.T.E.P.—swiveling front access platform with foldable ladder for side access, front left Body in insulated Fliegl Asphalt Profi Thermo version, metal cladding "Flip Top Sliding Cover"—automatic rear lock with folding bows. Cover folds forward. Electrically operated cover, with 7-pin socket (charging plug) at the front, no connection cable, incl. loose coupling socket for tractor unit, operation on trailer and via remote control. 7-pin spiral cable to truck for sliding cover, socket must be available on truck.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902035294, lastna masa: 5.663 kg, največja dovoljena obremenitev: 29.337 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.310 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.310 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: modra, Leto izdelave: 2024, The images are archive photos // Multiple units available! // The vehicle is still in transit! Chassis Tipping Semi-Trailer Basic lightweight construction, fifth wheel plate with interchangeable 2" king pin Curved front panel Telescopic support leg in center, uncoupling under load not possible Foldable underrun protection Half-shell mudguards Tarpaulin pole with bracket Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis measured by laser 1st axle is automatic lift axle, additionally controllable electrically from the truck, incl. forced lowering and start-up assistance, no truck installation required Brake System 2-circuit compressed air braking system Spring-loaded parking brake 2 unmistakable coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connection cable Automatic tipping reduction with shut-off valve Trailer Info Module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages Axle load detection via EBS CAN-bus signal Wheels and Tires 385/65 R22.5 Polished aluminum rims Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white positioning lights at the front in LED 2 white/red lane indicator lights at the rear 2x7-pin and 1x15-pin unmistakable sockets at front Hydraulics High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection Body / Dump Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount Internal ladder at front wall Shovel and broom holder externally on front wall Tailgate as pendulum-type, external mounting with double hook locking. 2 clamping screws with toggle latches at lower sides Spacers for pendulum tailgate lockable in the clamping screws Side walls continuously 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized design Fliegl S.T.E.P. – foldable access platform at front with foldable step ladder for side access, driver’s side only with "Flip Top sliding cover" Ljdpfxsyu Rlls Aicjac Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom and rear with Fliegl Isotherm. Sheet metal cladding "Flip Top sliding cover", automatic rear closure as folding bar. Cover built forward. Electrically powered cover, with 7-pin socket (charging plug at front without connection cable, incl. loose tractor connection, without truck installation, operation on trailer and via radio remote control) 7-pin spiral connection to truck for sliding cover, truck must have appropriate socket Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion and damage from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be reached due to permissible axle/support/kingpin loads. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels); vehicles with tipping bodies are intended for non-chemically aggressive loads. Paintwork Frame: DB 7350 Nova Grey Support legs: galvanized Body: RAL 5002 Ultramarine Blue Roll tarp: RAL 5002 Ultramarine Blue