Faymonville Multimax -Nz-4(1+3) Radmulde Stielmulde Auszieh. nakup rabljenega (63.536)

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End Redpfoy Iq Tdox An Ejt - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Coupling height loaded: 1,250 mm Loading Platform Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Stepped up to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: rabljeno, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, Leto izdelave: 2024, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Loading platform: - Extendable loading platform, approx. 8,800 mm long, with chamfer at the rear approx. 500 mm x 10° - A recess in the loading platform and into the chamfer to accommodate the excavator's dipper stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood surface on the chamfer of the loading platform Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood inlay - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted approx. 235 mm outwards and 215 mm inwards individually - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre pressure sensors Included Accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for hydraulic operations - 1 spare wheel - Outer beams on the gooseneck with fixing holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized - 2" kingpin - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable galvanized outriggers, approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, open continuously in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminium elements fitted on the extension pipes of the outriggers - Widenable U-profiles for inserting the ALU covers - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminium elements fitted on the extension pipes of the outriggers Rsdpsypb Akofx An Eet - 1 pair of mechanical rear supports - Remote steering control from both front and rear by cable remote control, with axle single-track alignment control - 1st axle with automatic lift axle function and start assist according to EU Directive 2021/535 - Under the gooseneck and at the rear crossmember left and right: 7-pin sockets with mountings for warning plates - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the chamfered part of the loading platform outer frame - Central lubrication system with 1 pump, BEKAMAX - Radio remote control for steering in addition to cable remote - Wabco Smart Board system - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm Redpfx Ask Aht Uon Est - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation Rodpervw U Sjfx An Ejt • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: rabljeno, lastna masa: 14.350 kg, največja dovoljena obremenitev: 48.650 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - SNT design gooseneck for optimized loading platform length, length approx. 3,700 mm - Gooseneck rear with approx. 1,000 mm x 10° bevel Loading Platform: - Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - Recessed area in platform and bevel for accommodating the excavator’s dipper stick Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually, approx. 235 mm outward and 215 mm inward - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the ramp outer frame Axles and Suspension: - BPW axles and suspension, first axle steering assist, all other axles forced steered hydromechanical - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse-lock, activated via reverse gear or manually - Air suspension with lift/lower valve - 235/75 R 17.5 tires - TPMS tire monitoring system Included Accessories: - Detachable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic controls (except hydraulic winches) - Park position for warning signs on gooseneck when not in use - 1 spare wheel - Gooseneck outer beams with fixing holes for bolted lashing rings - First borehole approx. 200 mm from the front, then every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of recessed lashing rings at the rear of the gooseneck - Gooseneck with 1 pair of plug-in anodized ALU sideboards, approx. 400 mm high - Gooseneck with plug-in anodized ALU rear board, approx. 400 mm high - Gooseneck deck with 40 mm thick hardwood, with checker plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - Round NATO socket on the front connector strip - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - Loading platform with continuous and between-axle interrupted approx. 50 mm thick hardwood deck - Platform locking with conically welded locking profiles every 250 mm - Including pre-tensioning plate Rjdpfxjyrfn Nj An Est - 1 intermediate table, approx. 300 mm wide, for extension tube with large cross-section; intermediate table has offset loading surface and extendable hanging rails for aluminum bridging elements - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in outer frame of platform, can be folded outwards - Galvanized extensions extendable by approx. 230 mm per side - Wheel wells with square climbing bars, 15 x 15 mm, open continuously in front of the axles to the gooseneck cross member, approx. 700 x 410 mm - ALU covers for wheel wells, also usable as bridging elements for extension or as widening planks - Aluminum elements lockable onto extension tubes of the widenings - Extendable U-profiles for ALU covers - Wheel wells with square climbing bars, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - 1st axle with automatic lift axle function - 4 warning signs, approx. 423 x 423 mm - Radio and cable remote control

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg Rsdpewta Aljfx An Ejt -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Rjdpfx Aneya E A Ne Eet Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually Rsdpfxetx Nwno An Eet * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.500 kg, dovoljena osna obremenitev (os 2): 12.500 kg, dovoljena osna obremenitev (os 3): 12.500 kg, prva registracija: 07/2000, skupna dolžina: 15.410 mm, skupna širina: 2.540 mm, skupna višina: 890 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, stanje pnevmatik: 50 odstotek, medosna razdalja: 12.460 mm, barva: drugo, Leto izdelave: 2000, Oprema: ABS, dvižna zadnja plošča, = Druge možnosti in dodatki = - 4 OSI - Zadnja loputa Rjdpsy Dd Tpefx An Ejt - Hidravlika - Zračno vzmetenje - Krmiljena os = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 245/70 R17.5 Znamka osi: SAF Zavore: bobnaste zavore Zadnja os 1: dvojna guma; Največja osna obremenitev: 12.500 kg; Profil pnevmatik: 50% Zadnja os 2: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 60% Zadnja os 3: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 70% Zadnja os 4: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 30% Teže Lastna teža: 12.800 kg Nosilnost: 68.450 kg Skupna dovoljena masa: 81.250 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: dobro Identifikacija Registrska številka: ZZ-98-52

Stanje: rabljeno, največja dovoljena obremenitev: 56.200 kg, skupna masa: 69.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/2021, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.625 mm, Leto izdelave: 2021, Oprema: ABS, FYAMONVILLE 4(2+2)-axle MULTIMAX low loader semi-trailer, air-suspended, with 2 self-steering trailing axles Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM German trailer, 1st owner 4.1 m telescopic extension, fully hydraulic ramps and supports, wheel recesses, extensions, ALLOY WHEELS, FULL EQUIPMENT!!! Gooseneck: Gooseneck SNT design approx. 3.7 m, bevel approx. 1,000 mm x 10° Loading platform: Telescopic loading platform, approx. 8.8 m long, ramped at approx. 500 mm x 10° Excavator dipper recess approx. 2,490 x 750 x 210 mm Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually Axles and suspension: 4x BPW axles 12 t, 2 fixed, 2 trailing, self-steering axles Electromagnetic reverse gear lock + manual operation Air suspension with raise/lower valve Tyres: 235/75 R17.5 3PMSF MICHELIN / PIRELLI Load index: 143/141J (144/144F), new spare wheel 16x ALLOY WHEELS, POWDER-COATED WABCO brake system, EBS-E EU regulations 24-volt lighting system by ASPÖCK-NORDIK ASPÖCK-UNIBOX sockets: 24N, 24S & 15-pin PAINTWORK Standard HRM metallization of outer frame Complete steel structure shot-blasted, ARC-ZINCED ZINACOR 850 (Zinc 85% - Alu 15%) hot finished Steel structure: Steel grades: * S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) * Welders certified to DIN-EN 287-1 * Welding process MAG according to EN ISO 4063 * Shielding gas M21 according to EN ISO 14175 Accessories: * Removable steel front wall, approx. 400 mm high * NATO socket + spiral cable * 3 kW electro-hydraulic power unit for hydraulic functions * Spare wheel bracket on the front wall * Mounting holes for bolt-on lashing rings * First hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings (LC 5,000 daN) * Mounting hole at the upper rear of the outer longitudinal member * 1 pair screw-in lashing rings (LC 10,000 daN) * Gooseneck with approx. 40 mm thick hardwood flooring * 1 pair removable aluminum side boards, aluminum rear board approx. 400 mm high, anodized * 2" kingpin * Guide plate on the gooseneck for the fifth wheel plate approx. 500 mm wide * 4 wheel chocks with bracket * Receptacles for ALU approach ramps * JOST mech. landing gear with 2-speed gearbox and crank * Continuous hardwood flooring, approx. 50 mm thick, interrupted between axles * Platform lock with conically welded locking profiles, 250 mm incl. pretension plate * Slots for insertable and repositionable bridging elements at the front of the platform * 1 intermediate table with offset platform, approx. 300 mm wide for the sliding tube * Front and rear with slots for insertable and repositionable bridging elements * Removable cover flush with the loading platform * Extensions extendable by approx. 230 mm per side * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm, in platform before 1st axle Redpfxjy Iq Ars An Eot * Wheel recess covers split lengthwise, with wooden overlay, secured externally with locking pins * Wheel recesses with steel covering and 15 x 15 mm square climbing bars approx. every 200 mm * Between the 2nd and 3rd axle, in the platform, one pair of fixed wheel recesses * Rubber flooring "Super Grip" 25 mm and steel covering approx. 5 mm as additional reinforcement on the ramped section of the platform * Control valves for hydraulic ramps on the right an...

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) Redpfxjy Auh Io An Ejt EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, dolžina tovornega prostora: 17.320 mm, širina tovornega prostora: 3.200 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 17.320 mm, skupna širina: 3.200 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70 R 17.5 | 143/131L (146/146F), barva: bež, Leto izdelave: 2021, Colour: Yellow Load capacity: 64,800 kg Main Features Manufacturer: Faymonville Type: GigaMax 1+4 / F-S45-2GXX Chassis number: YAFTL1009M0027562 Year of manufacture: 2021 Weights / Payload King pin load: 25,000 kg Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg Gross vehicle weight: 84,200 kg Unladen weight: 20,200 kg Payload: 64,800 kg Axles Pendle axles Hydraulic suspension All axles with hydraulic steering WABCO EBS-E braking system Tyres: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Length: 17,320 mm Load floor length: 6,800 mm 2x extension beams: 2,000 mm / 3,000 mm Load floor width: 2,750 mm / 3,200 mm Load floor height: 400 mm Ground clearance: 150 mm King pin height: +/- 1,340 mm Additional information: Gooseneck with integrated 1-axle pendle axle Hatz diesel powerpack Hydraulically operated gooseneck Aluminium sideboards on gooseneck 2x extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless steel toolbox Spare wheel + holder Rear bumper with lights 3.5" king pin Central lubrication system with 2 BEKAMAX pumps = Further Information = General Information Redpfxevzaans An Eot Year of manufacture: 2021 Axle configuration Tyre size: 245/70 R 17.5 | 143/131L (146/146F) Suspension: Hydraulic suspension Front axle: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Rear axle 1: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Rear axle 2: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Rear axle 3: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Rear axle 4: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Weights Unladen weight: 20,200 kg Payload: 64,800 kg Gross vehicle weight: 85,000 kg Functional Load floor height: 40 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Further information Please contact Stefan Schaapveld for further information.

Stanje: rabljeno, prevoženi kilometri: 74.000 km, moč: 94 kW (127,80 KM), število postelj: 2, vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 04/2004, naslednji pregled (TÜV): 05/2026, skupna dolžina: 7.720 mm, skupna širina: 2.260 mm, skupna višina: 2.780 mm, konfiguracija osi: 3 osi, skupna masa: 4.500 kg, Oprema: kopalnica, Viewing strictly by prior telephone appointment only!!! Rsdpfsyygqpox An Eot Vehicle location: 41066 Mönchengladbach Base vehicle: Fiat 2.8 JTDi with 94 kW * The motorhome is from first ownership and is well-maintained inside and out * TÜV valid until 05/2026 * Get in and drive off with joy Timing belt, water pump, V-belt, etc. were replaced at approx. 70,000 km (see photos of invoices) _____ * ALKO AMC chassis (increased safety, greater comfort) * Awning * Solar system * TV * Power steering * Refrigerator with separate freezer compartment * 3-burner stove * Stainless steel sink * Hot water boiler * Fresh water tank * Waste water tank * Trumatic circulation heating * 2x gas bottle holders * Fly screens on all windows * Blackout blinds on all windows * Wardrobe * Roof hatches * Toilet * Shower almost never used (mainly for drying laundry) * Tires will be renewed in summer 2025 * Number of sleeping places: 2 * Number of seats: 4 (as per vehicle registration) * Number of seat belts: 3 * Unladen weight: 3,470 kg * Gross vehicle weight: 4,500 kg * Payload: 1,030 kg * Dimensions (L/W/H): 7,720/2,260/2,780 mm * Many more extras * The unmatched performance level of the AL-KO AMC CHASSIS is based on hot-dip galvanized low and high frame structures in lightweight construction, as well as the AL-KO developed wide-track chassis with independent wheel suspension. An innovative concept for greater safety, better driving dynamics, and noticeably higher driving comfort! * The lower center of gravity noticeably improves road holding – you drive safely through every curve and crosswind problems are a thing of the past! * For further questions, please call (also available via WhatsApp) _____ * Test drives are of course possible by prior arrangement. * Available by phone on Sundays and public holidays. * Trade-in of your old motorhome or caravan is possible. _____ * The information provided in advertisements, on the internet, on price tags and in images are non-binding descriptions and do not constitute assured characteristics. The seller assumes no liability for typographical and data transmission errors. Listed features must be checked separately where applicable. All information in adverts is non-binding and provided without guarantee.

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Below is an excerpt from the equipment list. Full specification available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included Rsdpfx Aneyhkqns Eet REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit * 4 pairs of hanging la

Stanje: rabljeno, največja dovoljena obremenitev: 40.800 kg, skupna masa: 53.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Faymonville 4-osovinski Multimax STN-4AX niskopodni teleskopski poluprikolica Godina proizvodnje: 11.2012 Tara: 13.000 kg Dozvoljena ukupna masa: 53.800 kg Tehnički dozvoljena masa: 55.400 kg Nosivost: 40.800 kg Podpritisna sila: 25.000 kg Rodpou Aynlefx An Eet Dimenzije guma: 205.65R17,5 3. i 4. osovina – prinudno upravljane 4x SAF osovine 7.600 kg sa vazdušnim ogibljenjem Dužina: 13.475 mm do 20.275 mm (izvlačiva) Širina: 2540 mm do 2620 mm Visina: 1200 mm ! Dodatne informacije na zahtev putem e-maila ! Podaci su informativni i bez garancije na tačnost! Informacije dostupne na internetu su neobavezujući opisi i ne predstavljaju zagarantovane karakteristike. Prodavac ne odgovara za greške, tipografske greške ili greške u prenosu podataka. Zadržavamo pravo na izmene. Stalan otkup i prodaja, kao i zamena i iznajmljivanje dizalica i podiznih vozila, kao i građevinskih i teških vozila.

Stanje: novo, Please note! This model is the wide version, which offers significantly more interior space. A narrow version is available at a lower price! 9934806 Silver Edition Toilet Trailer with 3 x Ladies' WCs, 1 x Gents' WC, and 4 x Urinals Type: 3 x Ladies’ WC, 1 x Gents' WC, and 4 x Urinals Internal dimensions: approx. 5630 x 2380 x 2130 mm (L x W x H) Attention! This is the wide version, offering much more room inside. A narrower variant is available at a more attractive price! Permissible total weight: 2700 kg Durable, low-maintenance grey PVC flooring 4 heavy-duty crank supports including crank handle for secure setup LED exterior lighting for the entrance area Split side wall flap consisting of a fold-out stair section and an extendable canopy for the entrance area 3-step staircase made from aluminium checker plate, including lifting aid Folding and lockable side railings to the left and right of the stairs Low-frame chassis with 10-inch tyres Robust sandwich-box construction with 50 mm polyurethane core, hot-dip galvanized and powder-coated exterior and interior walls (insulated) Exterior colour: silver Reinforced automatic jockey wheel 3 service flaps on the left when viewed in the direction of travel 4 stable manoeuvring handles Concealed pipework Ladies' Area Equipment: Rsdpfx Anjy E Rqqe Eot 3 WC cubicles, each with wall-mounted, flush toilet Stainless steel toilet roll holders per cubicle Washstand with double basin incl. under-sink cupboard 2 sensor taps for touchless use 10 litre hot water boiler Paper towel dispenser Roof hatch with integrated fly screen and sun shade LED interior lighting Electric heater One spare socket Large mirror above the washbasin (1120 x 1220 mm) 4 floor drains for easy interior cleaning Gents' Area Equipment: 1 WC with wall-mounted, flush toilet Stainless steel toilet roll holder 4 urinals with contactless automatic flush Privacy screens between urinals Washstand with double basin incl. under-sink cupboard 2 sensor taps for touchless use 10 litre hot water boiler Paper towel dispenser Roof hatch with integrated fly screen and sun shade LED interior lighting Electric heater One spare socket Large mirror above the washbasin (1120 x 1220 mm) 4 floor drains for easy interior cleaning Technical Room Equipment: Fuse box Power supply: 380 V, 16 A incl. cable Freshwater connection incl. GEKA coupling, 3/4 inch, incl. 20 m hose 110 mm waste outlet pipe

Stanje: rabljeno, prevoženi kilometri: 618.325 km, moč: 375 kW (509,86 KM), prva registracija: 11/2015, vrsta goriva: dizel, gorivo: dizel, emisijski razred: Euro 6, Leto izdelave: 2015, Lastna teža: 11.800 kg Rjdpfxjy H Uwks An Eot

Stanje: dober (rabljeno), prevoženi kilometri: 812.271 km, moč: 320 kW (435,08 KM), prva registracija: 08/2015, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5, konfiguracija osi: 6x2, medosna razdalja: 6.700 mm, gorivo: dizel, barva: zelen, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 10.170 mm, skupna širina: 2.550 mm, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, dovoljena osna obremenitev (os 3): 7.500 kg, Leto izdelave: 2015, Oprema: AdBlue, centralno zaklepanje, parkirna klimatska naprava, parkirni grelec, spojler, tempomat, = Additional Options and Equipment = - Aluminium fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Roof spoiler - Windshield - Cabin - Air suspension - Sleeper cab - Auxiliary heater = Notes = Daf XF440 SuperSpaceCab 6x2*4 - Cuppers 1-2-3 deck Livestock + Cuppers 3 deck trailer 2009 MY: 13-8-2015 / 18-2-2009 KM: 812271 XLRASH4100G073990 / XL9VA101092053008 76-BGG-7 / 83-WD-LH APK/TUV: 24 DAF XF440 6x2*4 SSC 76-BGG-7 Rodpeymaqnefx An Est 812,200 km Alcoas Steering axle 1/2/3 decks Lifting roof Swinging floorboards Remote control Night air conditioning Coffee maker 2015 3-deck cuppers, approx. 2002 Cupper 3-deck trailer 83-WD-LH 02-2009 BPW axles Automatic doors Swinging floorboards Folding roof 3 decks Fans Remote release = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Front axle: Tire size: 385/55R22.5; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50%; Suspension: Leaf spring Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Suspension: Air suspension Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Tire tread left: 50%; Tire tread right: 50%; Suspension: Air suspension Weights Unladen weight: 14,507 kg Payload: 13,493 kg gross vehicle weight: 28,000 kg Functional Bodywork manufacturer: ZF Maintenance, History and Condition APK (Roadworthiness inspection): tested until 08.2026 Technical condition: good Visual condition: good Identification Registration number: 76-BGG-7 Further information Please contact VAEX The Truck Traders for further information.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 08/2022, barva: siv, Leto izdelave: 2022, = Dodatne možnosti in oprema = - Zračno vzmetenje = Opombe = Pezzaioli 1/2/3/4-nadstropni prevoz živine – voda & ventilacija – dvižno nakladalo – dvižna streha – BPW os Leto izdelave: 19-8-2022 ZFJSBA32UNM008036 1/2/3/4 nadstropja (spredaj 3 nadstropja / zadaj 4 nadstropja) Spredaj: 1. nadstropje: 9,4 2. nadstropje: 8,8 3. nadstropje: 8,6 Zadaj: 1. nadstropje: 23,9 2. nadstropje: 22,4 3. nadstropje: 21,9 4. nadstropje: 21,4 Voda & ventilacija Dvižno nakladalo Dvižna streha BPW os = Dodatne informacije = Znamka osi: BPW Zadnja os 1: dvojna montaža; alu platišča; max. osna obremenitev: 9000 kg Zadnja os 2: dvojna montaža; alu platišča; max. osna obremenitev: 9000 kg Zadnja os 3: dvojna montaža; alu platišča; max. osna obremenitev: 9000 kg Lastna masa: 13.500 kg Nosilnost: 25.500 kg Skupna masa: 39.000 kg Rsdpfxsy Aml Eo An Eot Tehnično stanje: dobro Optično stanje: dobro

Stanje: novo, konfiguracija osi: 3 osi, prva registracija: 11/2011, skupna dolžina: 14.040 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, medosna razdalja: 9.300 mm, Leto izdelave: 2011, Konfiguracija osi Zadnja os 1: dvižna os; Največja dovoljena osna obremenitev: 9.000 kg Zadnja os 2: Največja dovoljena osna obremenitev: 9.000 kg Zadnja os 3: Največja dovoljena osna obremenitev: 9.000 kg Teže Lastna teža: 12.920 kg Nosilnost: 26.080 kg Skupna dovoljena masa: 39.000 kg Vzdrževanje APK (tehnični pregled): veljaven do 08.2026 Stanje Splošno stanje: zelo dobro Rjdpfx Ajyza Hmen Ejt Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: dober (rabljeno), prevoženi kilometri: 812.271 km, moč: 320 kW (435,08 KM), prva registracija: 08/2015, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5, konfiguracija osi: 6x2, medosna razdalja: 6.700 mm, gorivo: dizel, barva: zelen, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 10.170 mm, skupna širina: 2.550 mm, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, dovoljena osna obremenitev (os 3): 7.500 kg, Leto izdelave: 2015, Oprema: AdBlue, centralno zaklepanje, parkirna klimatska naprava, parkirni grelec, spojler, tempomat, = Additional Options and Equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Roof spoiler - Windshield - Cabin - Air suspension - Sleeper cabin - Auxiliary heater Redpfx Aoywtuvsn Ejt = Notes = Daf XF440 SuperSpaceCab 6x2*4 - MY: 13-8-2015 KM: 812,271 XLRASH4100G073990 76-BGG-7 APK/TUV: 24-08-2026 DAF XF440 6x2*4 SSC 76-BGG-7 812,200 km Alcoa rims Steering axle 1/2/3 decks Lifting roof Swinging floorboards Remote control Night air conditioning Coffee maker 2015 3-deck cuppers, approx. 2002 = Further Information = Technical Data Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Front axle: Tire size: 385/55R22.5; Max. axle load: 9,000 kg; Left tire tread: 50%; Right tire tread: 50%; Suspension: leaf spring Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50%; Suspension: air suspension Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Left tire tread: 50%; Right tire tread: 50%; Suspension: air suspension Weights Unladen weight: 14,507 kg Payload: 13,493 kg Gross vehicle weight: 28,000 kg Functional Body manufacturer: ZF Maintenance, History, and Condition APK (main technical inspection): valid until 08.2026 Technical condition: good Optical condition: good Identification Registration number: 76-BGG-7

Stanje: novo, največja dovoljena obremenitev: 94.250 kg, skupna masa: 129.000 kg, konfiguracija osi: 3 osi, Eurocompact 1+2 Excavator Deck 1+4 with Pendular Axles Weights and Speed at 80 km/h: Fifth wheel load: 29,000 kg Axle load: 8 x 12,000 kg Gross vehicle weight rating: 129,000 kg Unladen weight: approx. 34,750 kg Payload: approx. 94,250 kg Gooseneck Length x width: 3,755 mm x 2,480 mm Fifth wheel height (laden): 1,350 mm Outer turning radius, front/rear: 1,300 mm / 2,750 mm Rodpfxowcy Efj An Ejt King pin: 3.5'' Fifth wheel load: 29,000 kg Unladen weight: 4,000 kg Front 1-Axle Bogie Single tyres: 245/70 R 17.5 with pendular axles (12-14 t axle load) Steering: countersteered axle arrangement Wheelbase: 1,500 mm Track width: 2,750 mm Unladen weight: 3,700 kg Front 2-Axle Bogie Single tyres: 245/70 R 17.5 with pendular axles (12-14 t axle load) Steering: countersteered axle arrangement Wheelbase: 1,500 mm Track width: 2,750 mm Unladen weight: 5,550 kg Excavator Deck – Single extendable, with separation point at rear Length x width: 7,000 mm x 1,380 mm with folding outriggers and mattress inserts Telescoping extension: up to 4,000 mm Construction height: 400 mm Loading height when loaded: approx. 500 mm (at 100 mm ground clearance) Unladen weight: 10,000 kg Rear 1-Axle Prisma Bogie Single tyres: 245/70 R 17.5 with pendular axles (12-14 t axle load) Steering: forced-steered Wheelbase: 1,500 mm Track width: 2,850 mm Unladen weight: 3,000 kg Rear 4-Axle Prisma Bogie Single tyres: 245/70 R 17.5 with pendular axles (12-14 t axle load) Steering: forced-steered Wheelbase: 1,500 mm Track width: 2,850 mm Unladen weight: 8,500 kg Radio remote control Central lubrication system

Stanje: dober (rabljeno), prevoženi kilometri: 999.999 km, moč: 375 kW (509,86 KM), prva registracija: 02/2011, vrsta goriva: dizel, velikost pnevmatike: 385/65, konfiguracija osi: 6x2, medosna razdalja: 6.200 mm, gorivo: dizel, zavore: retarder, vrsta prenosa: mehanski, število prestav: 16, emisijski razred: Euro 5, skupna dolžina: 9.600 mm, skupna širina: 2.550 mm, Leto izdelave: 2011, Oprema: retarder, zapora diferenciala, Berdex Tip 2 Alcoa Stacionarna klima Retarder 1790113 = Dodatne informacije = Tehničke informacije Broj cilindara: 6 Redpex Tu Aaofx An Eot Zapremina motora: 12.902 cc Menjač Menjač: manuelni retarder, 16 brzina, ručni menjač Konfiguracija osovina Prednja osovina: Dimenzije pneumatika: 385/65; alu felne; Maksimalno opterećenje osovine: 9000 kg; Profil gume levo: 65%; Profil gume desno: 65% Zadnja osovina 1: Dimenzije pneumatika: 315/70; duple gume; diferencijal sa blokadom; alu felne; Maksimalno opterećenje osovine: 11500 kg; Profil gume levo unutra: 40%; Profil gume levo spolja: 40%; Profil gume desno unutra: 40%; Profil gume desno spolja: 40% Zadnja osovina 2: Dimenzije pneumatika: 315/70; alu felne; podizna osovina; Maksimalno opterećenje osovine: 7500 kg; Profil gume levo: 45%; Profil gume desno: 45% Težine Prazna masa: 13.790 kg Nosivost: 14.210 kg Dozvoljena ukupna masa: 28.000 kg Funkcionalno Marka nadogradnje: ZF Stanje Tehničko stanje: dobro Vizuelno stanje: dobro Dodatne informacije Za više informacija obratite se Maarten Busser ili Niels Busser.

Stanje: rabljeno, največja dovoljena obremenitev: 8.500 kg, skupna masa: 13.500 kg, konfiguracija osi: 1 os, prva registracija: 10/1983, dolžina tovornega prostora: 9.900 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.900 mm, skupna širina: 2.500 mm, skupna višina: 3.900 mm, Kässbohrer 1-axle box trailer for 4 horses or 3 carriages with living area & cupboards - 1 large rear flap – 1 large side flap – 1 small front entrance door plus storage compartment - Approved as a semi-trailer for animal transport for sporting purposes – horse transporter – - Loading area length: 9,900 mm – total length: 10,520 mm - Loading area width: 2,400 mm – overall width: 2,500 mm - Internal height: approx. 2,900 mm – overall height: 3,900 mm - Gross vehicle weight: 8,770 kg – unladen weight: 3,750 kg – payload: 5,020 kg - Mechanically sound – trailer is sealed and dry – needs cosmetic attention - German vehicle – German registration document – - Viewing by appointment only - Contact: Mr. Andreas Vogel Rjdpsxglfvsfx An Ejt - The information provided online is for general guidance and non-binding. - It does not constitute warranted characteristics. - The seller is not liable for typographical or data transmission errors. - Subject to prior sale, changes, and errors.

Stanje: novo, lastna masa: 2.050 kg, največja dovoljena obremenitev: 650 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 5.600 mm, širina tovornega prostora: 2.170 mm, višina nakladalnega prostora: 2.100 mm, velikost pnevmatike: 195/55R10C, Large restroom trailer with aesthetic interior fittings. For a party, city festival, street festival, corporate event, or any other outdoor event, a restroom trailer is often indispensable. We have made it our mission to help here by developing affordable car trailers with toilet facilities. For us, an attractive interior design is just as important as good equipment in a restroom trailer. The car trailer is divided into two sections for ladies and gentlemen. Lighting, heaters, and hot water heaters are operated via the electrical connection. Wall-mounted toilets with built-in cisterns and concealed piping ensure an attractive atmosphere. There is a fresh water supply, and gray water disposal is handled through a drainage channel. Access to the mobile toilet is provided by a wide, fold-down staircase with lifting aids. The remaining part of the side wall folds up to serve as weather protection. Pivoting handrails provide safety. Two entrance doors protect against wind and weather. The stairway is illuminated with an LED strip. Standard equipment in the ladies' area includes three lockable cubicles with wall-mounted toilets, built-in cisterns, and toilet paper holders. The main room features a heater, drain for interior cleaning, PVC flooring, washbasin with cabinet and instantaneous water heater, mirror, LED lighting, roof fan with mosquito net and blackout blind, light switch, and power outlet. The gentlemen's section contains just one cubicle, which is equipped the same way as those on the ladies’ side. The basic equipment is also the same. Additionally, there are four wall-mounted urinals with touch-free sensors. The general features of the box trailer with toilet equipment include a 50mm insulated sandwich construction (silver exterior, white interior), insulated flooring, technical access flaps on the left, 230V supply socket, distribution box with circuit breaker, fresh water inlet, gray water drain connection, four robust crank supports, very stable frame and V-drawbar, hot-dip galvanized. Rjdpfx Aeuh Rzqen Eet Further technical details can be found below. Optional accessories for our toilet vehicles include 100 km/h shock absorbers, anti-theft devices, and drawbar storage boxes.