Schwarzmüller Mega 96 M3/3-Achs /Bpw /Alu / Lift / 08 Mm Boden nakup rabljenega (53.976)

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 1.335 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.220 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2000.27 Permissible Total Weight: 2,000 kg Payload: 1,335 kg Unladen Weight: 665 kg Body Dimensions: 2,670 x 1,500 x 350 mm Tyres: 13 inch Gbjdpfjgi Sr Sox Acgsl Loading Height: 750 mm Load Area hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg total weight, electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made from powder-coated, galvanized sheet steel, fully removable - Rear flap with swing function - 6 tie-down rings mounted on bed floor, load capacity 800 kg per ring, DEKRA certified - Jockey wheel - Channel as preparation for aluminium ramps for easy retrofitting Price includes vehicle registration document (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transit license plate. We repair trailers of all makes. Additional accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Reverse-automatic, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, galvanized steel sheet, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized by immersion, tipping bridge made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg total weight electric pump with hand pump, 13-pin connector and reversing lights, powder-coated, fully removable drop sides, rear flap with swing function, 6 tie-down rings mounted on the bed floor, load capacity 800 kg per ring, DEKRA certified, ramp channel prepared for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyre Size: 13 inch Loading Height: 740 mm Loading platform can be hydraulically tipped with hand pump and electric pump Tipping angle: rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge, fully hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear flap is swing- and drop-type - 6 lashing rings mounted on the platform floor, tensile force 800 kg per ring, Dekra approved - Jockey wheel - Shaft for installing aluminum ramps, pre-equipped for easy retrofitting - Black side walls Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. A free transfer license plate is available upon request. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices and availability subject to change. No liability for errors or misprints. Features: automatic reverse, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side walls, fully removable, swing-type rear flap, 6 lashing rings on the platform floor (800 kg tensile force each, Dekra approved), shaft pre-installed for retrofitting aluminum ramps, black side walls. Gbsdpfx Asvtf I Ujcgsl

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.500 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.210 mm, delovna širina: 2.003 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 3500.37 Permissible gross weight: 3,500 kg Payload: 2,500 kg Unladen weight: 1,000 kg Load bed dimensions: 3,630 x 1,850 x 350 mm Tyres: 13 inch Loading height: 740 mm Load platform hydraulically tipppable with manual pump and electric pump Tipping angle rear 42°, side 50° Gbsdpfxorq Exbs Acgjl - V-drawbar, fully hot-dip galvanized - Chassis and tipping platforms, fully hot-dip galvanized - One-piece steel tipping platform - 4-stage hard chrome tipping cylinder - Manual pump, and from 3,000 kg permissible gross weight onwards, electric pump with manual pump - 13-pin plug and reversing lights - Aluminium side boards, 350 mm high, fully removable - Swinging rear gate - 8 lashing rings on the bed, pull force 800 kg per ring, Dekra-certified - Support wheel - Plank compartment prepared for aluminium planks for easy retrofitting Price includes vehicle registration certificate (Certificate of Registration Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary license plate. We repair trailers of all makes. Further accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Features: automatic reverse, rubber suspension axle, independent suspension, tilting load platform, support wheel, position lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard chrome tipping cylinder, manual pump, from 3,000 kg permissible gross weight electric pump with manual pump, 13-pin plug and reversing lights, aluminium sidewalls 350 mm high, fully removable, swing rear gate, 8 lashing rings on the load bed, pulling force 800 kg per ring, Dekra certified, plank compartment prepped for easy retrofitting of aluminium planks.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2700.27 Gross Vehicle Weight: 2700 kg Payload: 2025 kg Unladen Weight: 675 kg Internal Dimensions: 2670 x 1500 x 350 mm Tyres: 13 inch Loading Height: 725 mm Load bed hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping frame, hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump; for permissible total weight from 3000 kg electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made of powder-coated, galvanized steel plate, completely removable - Rear tailgate with swing function - 6 lashing rings mounted on platform floor, rated for 800 kg per ring, Dekra certified - Jockey wheel - Boarding plank compartment pre-installed for retrofitting aluminium planks Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Godpfsri Tbxsx Acgsbl Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary registration plate from us. We repair trailers from all manufacturers. Additional accessories upon request. Subject to technical modifications, price changes, and errors. No liability for errors or misprints. Features: Automatic reverse, rubber suspension axle, independent wheel suspension, tilting load area, jockey wheel, marker lights, galvanized steel plate, braked, includes warranty, hot-dip galvanized V-drawbar, hot-dip galvanized chassis and tipping frame, one-piece steel tipping platform, 4-stage hard-chromed tipping cylinder, hand pump (from 3000 kg permissible total weight: electric pump with hand pump), 13-pin connector and reversing lights, powder-coated drop sides, fully removable, rear tailgate with swing function, 6 lashing rings mounted on floor rated at 800 kg each, Dekra certified, boarding plank compartment prepared for easy retrofitting of aluminium boarding planks.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 2700.27 Permissible total weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Bed dimensions: 2670 x 1500 x 350 mm Tyres: 13-inch Loading height: 725 mm Load platform hydraulically tipable via manual pump Tipping angle: rear 45°, sides 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chrome tipping cylinder Gsderi Tb Aspfx Acgsbl - Electric pump with emergency hand pump - 13-pin connector and reversing lights - Side panels made of powder-coated, galvanized steel, fully removable - Rear tailgate can be swung - 6 lashing rings mounted on the bed, each with 800 kg load capacity, Dekra certified - Jockey wheel - Lashing trough preinstalled for optional aluminum floor inserts – easy to retrofit Price includes vehicle registration documents (registration certificate Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. You can request a free temporary number plate for transport. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. We accept no responsibility for mistakes or typographical errors. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, galvanized steel panels, braked, includes warranty, V-drawbar hot-dip galvanized, chassis and tipper platform hot-dip galvanized, single piece steel tipper platform, 4-stage hard-chrome tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reversing lights, powder-coated fully removable side panels, swing rear tailgate, 6 lashing rings mounted in bed rated to 800 kg each (Dekra certified), preinstalled trough for easy retrofitting of aluminum floor inserts.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Box Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Gjdorazk Uopfx Acgjbl Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tipping angle: rear 42°, side 50° Key Features: - V-drawbar, hot-dip galvanised - Chassis and tipping bridge hot-dip galvanised - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight with electric pump and hand pump - 13-pin plug and reversing lights - Side walls made from 350 mm high aluminium, completely removable - Rear tailgate can swing - 6 lashing rings mounted on the platform floor, each with 800 kg pull force, Dekra certified - Support wheel - Channel prepared for easy retrofit of aluminium loading ramps Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price adjustments, and errors excepted. No liability for errors or misprints. Features: Reverse automatic brake, rubber suspension axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipper platform hot-dip galvanised, braked, including warranty, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium drop sides, completely removable, swinging rear gate, 6 lashing rings on floor (800 kg pull each, Dekra tested), ramp channel for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Gbjdpfjktm Susx Acgol Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.100 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.251 mm, delovna širina: 2.022 mm, Manufacturer: Humbaur Gbjdpfx Asl Dqldocgol Model: 3-Way Tipper HTK Alu 3000.37 Permissible Gross Weight: 3000 kg Payload: 2100 kg Unladen Weight: 900 kg Body Dimensions: 3630 x 1850 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable via manual pump and electric pump Tipping angle rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platform fully hot-dip galvanized - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Manual pump; from 3000 kg gross weight onwards: electric pump with manual backup - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear tailgate can be used as a swinging gate - 8 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra tested - Jockey wheel - Preparation for aluminum ramps (ramp compartment) for easy retrofitting Price includes registration documents (Certificate of Title Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Features: auto-reverse brakes, rubber suspension axle, independent suspension, tiltable loading platform, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from one-piece steel, 4-stage hard-chromed tipping cylinder, manual pump, from 3000 kg gross weight electric pump with manual backup, 13-pin plug and reversing lights, aluminum side walls 350 mm high, fully removable, rear swinging tailgate, 8 lashing rings mounted to the platform with 800 kg tensile load per ring, Dekra approved, ramp compartment as preparation for retrofitting aluminum ramps.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 24.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65-22,5, barva: črn, Oprema: ABS, = Further Options and Accessories = - EBS - LED lighting - Air suspension - Disc brakes - Toolbox = Notes = Internal reference number for customer inquiries: 2315 Immediately Available!!! PAVIC trailer timber transport platform, hardwood floor, 43 t technical gross weight, 13,500 mm loading length. With quick-change pocket system. Only the stanchion is removed; the mechanism remains in the pocket. Your advantage: standard stanchions with low weight at reasonable prices. IMMEDIATELY AVAILABLE! * Chassis length approx. 13,510 mm (front frame to front frame) * Chassis width approx. 2,540 mm (outer frame to outer frame) * Ride height unladen approx. 1,400 mm at a fifth wheel height of 1,200 mm * Maximum kingpin load: approx. 16,000 kg * Front overhang (kingpin to front edge of front frame): 1,550 mm * 2" kingpin according to SAE standard, replaceable from below * E-wheel holder for 1 E-wheel * Headboard approx. 2,500 mm high, corners angled with metal cladding * Steel floor, 4/6 mm checker plate cover * Outer frame with rounded edges and lashing holes for load securing approx. every 500 mm * First axle lift, automatic function with starting aid * Axle spacing approx. 1,310/1,310 mm * Premium tires 385/65 R 22.5 * EBS braking system with Roll Stability Program * Smartboard/TIM/Infocenter, in addition to the H+S valve * LED lighting system * LED work lights * 2x plastic toolboxes * 2x long custom-made aluminum storage boxes by Pavic * Optional with OPIPA AL10 aluminum stanchions Financing available through our financing partners. Our sales team will be happy to answer any further questions you may have. This is a non-binding offer. Subject to prior sale, errors and changes. Gbjdpfx Aoylvk Uscgol = Further Information = Tyre size: 385/65-22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Gross vehicle weight: 40,000 kg Body manufacturer: PAVIC short timber platform quick-change General condition: Very good Technical condition: Very good Visual condition: Very good

Stanje: rabljeno, prva registracija: 09/2009, Leto izdelave: 2009, REISCH 3-osna / 3-stranski prekucnik za žito, aluminij/jeklo ODLIČNO STANJE!! Gbodpswmpk Ssfx Acgol • Polno zračno vzmetenje • 3 x BPW ECO - Plus osi • ABS / EBS • Aluminijasta prekucna nadgradnja • Jekleno dno z vponkami za privez • Deljene, stranske aluminijaste stranice • Zadnja vrata iz jekla • Žitni izpust • Skupna dolžina vozila: 8.950 x 2.550 x 2.750 mm (D x Š x V) • Notranje mere nadgradnje: 6.600 x 2.470 x 1.210 mm (D x Š x V) • Prostornina: 20 m³ • Pnevmatike: 385/65 R 22.5 • Dober profil! • Lastna masa: 6.000 kg • Skupna masa: 24.000 kg - Nemško vozilo! - Tehnični pregled / TÜV: NOV! Pridržujemo si pravico do napak in predhodne prodaje!

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame Gjdpfjiu Er Asx Acgobl - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: Gbedpfx Acek Eammogjl JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Gbedpfx Aol Ux Rwjcgel Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2013, dolžina tovornega prostora: 13.320 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.600 mm, skupna dolžina: 14.000 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 65 R 22,5, Leto izdelave: 2013, Konfiguracija osi Dimenzija pnevmatik: 385 65 R 22,5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Profil pnevmatike levo: 90 %; desno: 90 % Zadnja os 2: Profil pnevmatike levo: 30 %; desno: 70 % Zadnja os 3: Profil pnevmatike levo: 40 %; desno: 90 % Teža Lastna masa: 9.000 kg Nosilnost: 30.000 kg Dovoljena skupna masa: 39.000 kg Gbedpfxewymz Ue Acgjl Funkcionalno Hladilni motor: dizelski in električni (14.693 obratovalnih ur dizel; 3.334 elektrika) Debelina stene: 5 mm = Druge možnosti in oprema = - Zadnja vrata - Thermoking = Opombe = Znamka hladilne enote: Thermo King

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Gedpoikyh Hsfx Acgebl Tires 385/65 R 22.5 Braking system: WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: Gedpfxoiuy Nlo Acgjbl - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) Gbodpoi Dwlwefx Acgsl - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2170, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/1999, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.000 mm, vzmetenje: zrak, medosna razdalja: 1.310 mm, barva: modra, Leto izdelave: 1999, Oprema: ABS, Krone mega polpriklopnik z Edscha pomično streho, portalnimi vrati, stransko perforirano letevjo, nemško vozilo iz prve roke. Prodaja samo podjetnikom in z izključitvijo kakršnegakoli jamstva. Dostavljamo v katerokoli nemško morsko pristanišče. Godpfjx Rrbbjx Acgebl

Stanje: rabljeno, največja dovoljena obremenitev: 29.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2008, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2008, Oprema: ABS, * Manufacturer: Wilken * Trideck forced steering, 3rd axle * Lift axle * Mounting bracket for truck-mounted forklift * 500 mm aluminum side walls Gjdswaph Ropfx Acgjbl * SAF axles * Full air suspension * Disc brakes

Stanje: rabljeno, največja dovoljena obremenitev: 29.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2008, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2008, Oprema: ABS, * Manufacturer: Wilken * Trideck with forced steering on the 3rd axle * Lift axle * Mounting bracket for truck-mounted forklift * 500 mm aluminium drop sides * SAF axles * Full air suspension Gbjdpfxowaph Dj Acgjl * Disc brakes

Stanje: novo, Leto izdelave: 2025, Oprema: ABS, F.X. Meiller 25 m³ NOVO VOZILO 5 x na zalogi - 3. dvižna os - Jeklena prekucna kesona - Dvižna os Gjdpfx Aow Rittocgjbl - LED zadnje luči - LED stranske označevalne luči - LED osvetlitev registrske tablice - Kolutna zavora - Prednja stena: 4 mm BS 70 - Zadnja stena: 4 mm HNW Hardox - Stranske stene: 4 mm HBW Hardox 450 - Dno: 5/6 mm HBW 450 Hardox, po meri - Višina stranskih sten: 1.500 mm Pridržujemo si pravico do napak in vmesne prodaje. Interna številka vozila: 11235+11236+11237+11238+11239 Podpora preko WhatsApp na voljo! Za vprašanja glede vozila ali dodatne informacije nam pišite prek WhatsApp Whatsapp Whatsapp

Stanje: rabljeno, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2026, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete specification upon request. Frame: * Conventional ladder frame in lightweight steel construction with through-bolted cross members * Chassis frame with camber * Cover plate between outer frame and longitudinal member, serving as tire protection for the drive axle of the tractor unit * Fifth wheel plate approx. 8 mm thick with 2-inch kingpin according to DIN 74080 / ISO 337 Running Gear: * Axle lift mechanism on axle 1 * BPW three-axle module ECO Air with disc brakes, approx. Ø 370 mm, ET 120 * Air suspension with approx. 260 mm stroke Vehicle Tires: * 6x 445/45 R 19.5, 160J tires Chassis attachments: * Mechanical landing legs with compensating foot, approx. 24 t lifting capacity, operation on right side in direction of travel * Side underrun protection, tool-free folding, on right and left in direction of travel * Spare wheel mount with winch, incl. 1 wheel fixing kit, mounted behind axle module Gbodpfx Acex Tx Efsgsl * Storage for 16 square tube stakes approx. 80 x 80 x 1,990 mm, mounted to the longitudinal member on left and right in the direction of travel * Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, installed rear left in direction of travel * Rear right access ladder, extendable Brake / Air suspension system: * EBS system 2S/2M with stability control (including ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines) * Parking brake with spring accumulator, external pneumatic connectors, as well as external EBS diagnostic connector via ISO 7638 plug * WABCO EBS system * Air suspension system incl. 1 raise/lower valve, mounted in direction of travel left behind axle module. Ride height is self-adjusting * 2 confusion-proof coupling heads front ISO 1728 * Air reservoir for brake system and air supply in steel (EN 286-2) Floor: * Board floor approx. 30 mm thick, multiple-bonded plywood * Rear floor jointed * Stake pockets for square tube stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 stake pocket rails (18 stake pockets per rail, 4 outer + 10 center per rail) Front wall: * Front wall approx. 2,000 mm high with steel volume corner posts, profiled steel sheet, bolted/riveted to frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on bulkhead according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used if the vehicle is operated without sideboards and rear drop / tailgate! * Sidewall VarioFix steel lashing outer frame without stake storage * 24 pairs of lashing rings in the outer frame (according to EN 12640), allowable drawbar pull approx. 5,000 kg per ring Electrics / Electronics: * Lamp bracket made of steel, positioned above underrun protector * KÖGEL LUXIMA Premium package, consisting of: LED license plate light, LED marker lights and front reflectors, flashing LED side marker lights, Superseal and bayonet connectors on the lights * 2 outline marker lights with arm, attached to multiple-chamber tail light * 2 multiple-chamber tail lights * Fixed adapter box with 2x 7-pin sockets (1 x ISO 1185 / 1 x ISO 3731, 24 V-N / 24 V-S) and 15-pin socket ISO 12098 * Compact LED rotating beacon, orange, with mounting tube, positioned on lamp carrier. Switch located in the lamp

Stanje: rabljeno, največja dovoljena obremenitev: 31.915 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2013, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.995 mm, prostornina tovornega prostora: 101 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Mega Liner, drop-side body with tarpaulin and curtain-side construction, lateral sliding tarpaulins, sliding roof, translucent roof tarpaulin, steel container doors with bar lock systems, phenolic resin coated plywood floor, continuous lashing holes in the outer frame, support legs, front and rear, ABS, EBS, BPW EcoPlus axle(s), disc brake system, air suspension with lifting and lowering function, lift axle, 2x storage boxes. Vehicle may be covered with advertising stickers and/or lettering. Gbsdpfx Acovr Rdfogel Our offer is generally without a new roadworthiness inspection (TÜV). Should a new TÜV inspection be required, we will gladly provide you with an offer from our partner workshops! Vehicle may be covered with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to prepare a finance or leasing offer for this unit. Please contact us!

Stanje: rabljeno, največja dovoljena obremenitev: 33.100 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2022, skupna širina: 2.550 mm, skupna višina: 3.780 mm, Oprema: ABS, Benalu BulkLiner S 95, 51.5 m³!!! FOR RENT!!! * ? Unladen weight: 5,900 kg Gsdpfx Acetpfn Tsgjbl * Axles: Single tires * Coupling plates and kingpin: Bolted steel coupling plate - thickness 8 mm * Axles: SAF axles - disc brakes * 1st axle lift: Lift axle control * Tires: 6 x 385/65 R 22.5 Bridgestone Regional * Aluminum rims: Speedline Satin finish * Automatic lowering when tipping * Load pressure indicator: Load pressure indicator with manometer 0-10 bar * Electrical and brake box: Cable tray for electrical and pneumatic lines * Work lights: Central and rear white LED work lamps * Work lights / Number: 4 * Tipping cylinder manufacturer: Hyva * Tipping angle (°): 48 * Tow coupling: - * Toolbox / Number: 1 toolbox * Side walls: Smooth aluminum - double-walled longitudinal hollow profiles - vertical gradient, inner thickness 3 mm at mid-height ? * Internal length: 9.50 m * Usable internal height: 2,200 mm * Top rail profiles beveled inward * Floor tub thickness: 5 mm * Usable internal width (mm): 2,410 * Floor reinforcement struts: - * Front wall: 14° sloped front wall - thickness 4 mm * Door: Universal door - double rod locks - foldable upper crossbeam - 2 door wings - 1 grain chute with protective cover in each wing - rubber gaskets on the wings and the fixed frame, door type: wing construction with ribbing * Half locking bar - Door locking: Pneumatic automatic release of the pendulum frame with 4 hooks * Upper door hinge * Pendulum flap: Upper aluminum double hinge - detachable - integrated at side wall height * Grain chutes: Right & left (aluminum) * Locking on doors and grain chutes * Hyfix: HYFIX tipping body locking system * Rear ladder: Removable rear access ladder * Tarp system: Rolling tarpaulin system - white transparent strip * Platform at the front wall: Access on right and left * Smartboard (digital control panel) We are an authorized Benalu dealer and would be happy to provide you with a quote for your desired vehicle. Prior sale and errors expressly reserved!

Stanje: rabljeno, največja dovoljena obremenitev: 26.200 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, Oprema: ABS, Polpriklopnik Schwarzmüller J-serije, priklopnik za prevoz pijač, aluminijasta platišča, dvižna os, certifikat o varovanju tovora in poseben certifikat o varovanju tovora za prevoz pijač, pnevmatike približno 40 - 50 % splošne obrabe, priklopnik ima avstrijske dokumente, lastna teža: 5.800 kg, št. šasije: VAVJS1339FH354928, kontakt: Ivelina Redl (ruščina, bolgarščina, srbščina, angleščina, nemščina) Tel., napake in vmesna prodaja pridržane! Godpfxsy I E Uij Acgebl