Priklopnik sedeža z delovno ploščadjo

KÖGEL 3-Achs-Mega Chassis

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Excerpt from the equipment. Complete specification upon request.

Frame:
* Conventional ladder frame in lightweight steel construction with through-bolted cross members
* Chassis frame with camber
* Cover plate between outer frame and longitudinal member, serving as tire protection for the drive axle of the tractor unit
* Fifth wheel plate approx. 8 mm thick with 2-inch kingpin according to DIN 74080 / ISO 337

Running Gear:
* Axle lift mechanism on axle 1
* BPW three-axle module ECO Air with disc brakes, approx. Ø 370 mm, ET 120
* Air suspension with approx. 260 mm stroke

Vehicle Tires:
* 6x 445/45 R 19.5, 160J tires

Chassis attachments:
* Mechanical landing legs with compensating foot, approx. 24 t lifting capacity, operation on right side in direction of travel
* Side underrun protection, tool-free folding, on right and left in direction of travel
* Spare wheel mount with winch, incl. 1 wheel fixing kit, mounted behind axle module
* Storage for 16 square tube stakes approx. 80 x 80 x 1,990 mm, mounted to the longitudinal member on left and right in the direction of travel
Giedpfx Afox Tx Efozol
* Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, installed rear left in direction of travel
* Rear right access ladder, extendable

Brake / Air suspension system:
* EBS system 2S/2M with stability control (including ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines)
* Parking brake with spring accumulator, external pneumatic connectors, as well as external EBS diagnostic connector via ISO 7638 plug
* WABCO EBS system
* Air suspension system incl. 1 raise/lower valve, mounted in direction of travel left behind axle module. Ride height is self-adjusting
* 2 confusion-proof coupling heads front ISO 1728
* Air reservoir for brake system and air supply in steel (EN 286-2)

Floor:
* Board floor approx. 30 mm thick, multiple-bonded plywood
* Rear floor jointed
* Stake pockets for square tube stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 stake pocket rails (18 stake pockets per rail, 4 outer + 10 center per rail)

Front wall:
* Front wall approx. 2,000 mm high with steel volume corner posts, profiled steel sheet, bolted/riveted to frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on bulkhead according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used if the vehicle is operated without sideboards and rear drop / tailgate!
* Sidewall VarioFix steel lashing outer frame without stake storage
* 24 pairs of lashing rings in the outer frame (according to EN 12640), allowable drawbar pull approx. 5,000 kg per ring

Electrics / Electronics:
* Lamp bracket made of steel, positioned above underrun protector
* KÖGEL LUXIMA Premium package, consisting of: LED license plate light, LED marker lights and front reflectors, flashing LED side marker lights, Superseal and bayonet connectors on the lights
* 2 outline marker lights with arm, attached to multiple-chamber tail light
* 2 multiple-chamber tail lights
* Fixed adapter box with 2x 7-pin sockets (1 x ISO 1185 / 1 x ISO 3731, 24 V-N / 24 V-S) and 15-pin socket ISO 12098
* Compact LED rotating beacon, orange, with mounting tube, positioned on lamp carrier. Switch located in the lamp

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.