Müller-Mitteltal 21 To Luftgef. Tandemtieflader Mit Auffahrrampen nakup rabljenega (32.794)

Stanje: novo, največja dovoljena obremenitev: 9.130 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronisches Bremssystem) * RDÜ (Reifendrucküberwachung) * Trommelbremsen, 2 x 5,5 t Gigant Achsen * Parabelfedern mit Ausgleichsaggregat * ca. 300 mm höhenverstellbares Zugrohr * BPW Stützwinde * mechanische Fallstützen hinten * Kunststoff-Werkzeugkasten vorne rechts an der Stirnwand Rcsdpfewyhzpsx Acnof * seitlicher Anfahrschutz * LED-Beleuchtung * 50 mm Nadelholzboden * in den Ecken vor der Stirnwand und am Abschlussträger jeweils 1 x 6,3 t Zurröse sowie seitlich je 2 x 6,3 t UVV-Zurringe im Außenrahmen eingelassen * einteilige mechanische Gitterrost-Auffahrrampen mit Federmechanismus für Einmannbetrieb ca. 2.350 x 870 mm (Innenabstand 20 mm, Rampen nicht verschiebbar) * Stirnwand, Seitenwände, Kotflügel und Zugrohr feuerverzinkt * Achsen, Federn, Luftkessel, Stützwinde vorne in einem Schwarzton lackiert * Neufahrzeug mit voller Herstellergewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Sofort lieferbar ab Egestorf

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper buffer * Mechanical drop-down supports at the rear ----Container / Low-bed platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roll grooves in the bogie area * When transporting roll-off containers, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking and mechanically insertable front stop angles in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops fitted with pivoting stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 Rcodpfjpk D Awjx Acnjf ----Ramps: * Weld bead as anti-slip surfacing in the running area of the access slope * 1 pair of aluminium loading ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height, loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape, side and rear * Axles, turntable, drawbar and air tank painted black * Hot-dip galvanized main frame ----Information: * Gross vehicle weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash guards Rcsdpfxspk D Iio Acnof * Plastic rear impact protection buffer * Mechanical rear support legs ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * Suitable for roll-off container transport with container lengths from 5,500 to 7,000 mm * Pneumatic 4-point container clamp lock and mechanical plug-in end stops at the front of the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swinging end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 cloverleaf-style lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp run-up area * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible total weight technically possible: 27,000 kg * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: rabljeno, največja dovoljena obremenitev: 23.180 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, dolžina tovornega prostora: 8.300 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 10.805 mm, skupna širina: 2.550 mm, Skupna masa: 24.000 kg / 30.000 kg Lastna masa: 6.820 kg Nosilnost: 17.180 kg / 23.180 kg Skupna dolžina: 10.805 mm Dolžina tovornega prostora: skupaj približno 8.300 mm / približno 6.500 mm za nizkopodvojno različico, vključno z zadnjim delom Širina: 2.550 mm Višina tovornega prostora: 900 mm Dodatne informacije: Niše za kolesa Nagibne plošče Stranske nagibne plošče, ki se premikajo vstran Rotacijska luč Opozorilne table spredaj in zadaj Dvojne pnevmatike Os BPW Plastična orodjarna omara Rcedpfx Aszwkkrjcnjf Zložljiva zadnja opora Niša za bager, približno 2.400 mm x 800 mm Velik komplet pritrdilnih trakov Pritrdilne obroče na zunanjem okvirju Prostor za shranjevanje v ukrivljenem delu

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Rcsdpfx Acoflw Sbenof Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized - Tipping platform made of steel, pressed from a single piece - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear tailgate, swinging - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, največja dovoljena obremenitev: 14.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RA-T 18,0 / 018: ----Zavore: * Wabco EBS-E (elektronski zavorni sistem) * Sistem za hitro sprostitev zavor za cilindr s pomnilnikom vzmeti * Diskovne zavore ----Osi: * 2 x 10 ton, široke osi BPW ----Vzmetenje: * Zračno vzmetenje (avtomatsko spuščanje ob sprostitvi zavor) ----Povezovalna naprava: * Povezovalna naprava, dolžina približno 2.300 mm, z 40 mm vtičnico in nastavitvijo višine s pomočjo vzmetne palice in zapornice ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * 15-polni električni vtič * LED zadnje luči ----Splošni dodatni deli: * Plastična orodjarna škatla 450 x 470 mm, na desni strani * Omara za orodje, na strani, 1.000 x 500 x 5.000 mm * Zaprti plastični blatniki, spredaj in zadaj * Zaprt bočni odbijač kot reklamna površina * Podvozni ščit zadaj * Plastični odbijač zadaj * A-oznaka zadaj ----Površina za zabojnik: * Dolžina valjčne tirnice, približno 6.830 mm * Pnevmatska 4-kraka zapornica * Mehansko nastavljivi oporni koti (2 položaja), spredaj na levi in desni strani na valjčnih tirnicah * Primerno za zabojnike dolžine 5.500 - 7.000 mm ----Pnevmatike: * 265/70 R 19,5, dvojne pnevmatike ----Lastna teža: * 3.220 kg ----Višina v praznem stanju: * približno 1.130 mm pri obremenitvi ----Barvanje: * Vroče pocinkano podvozje Rcedpfsv Nulzex Acnof * Zračni rezervoar, osi, vrtilni obroč in povezovalna naprava ----Informacije: * --Dovoljena skupna masa 20.000 kg je tehnično možna-- * Novo vozilo z garancijo proizvajalca * Pridržana možnost sprememb in napak * Medtem lahko pride do prodaje ----Dobavni rok: * Na voljo takoj, od Egestorfa

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: Rodjtpta Djpfx Acnocf * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: novo, lastna masa: 700 kg, največja dovoljena obremenitev: 2.650 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: srebrn, gradbena višina: 2.800 mm, delovna širina: 2.163 mm, Manufacturer: Humbaur Model: High-loader HT 354121 Permissible total weight: 3500 kg Payload: 2800 kg Payload with high tarpaulin approx. 2650 kg Unladen weight: 700 kg Unladen weight with high tarpaulin approx. 850 kg Loading dimensions: 4100 x 2100 x 350 mm With high tarpaulin: internal height 220 cm Color: Silver Tyres: 185 R14C 104 load index Loading height: 770 mm Incl. 100 km/h approval Both sides with sliding tarpaulin Rodpsfic T Isfx Acnjcf Tarpaulin silver with frame, internal height 220 cm, Made in Germany Only high-quality truck tarpaulin used (680 g/m²). Tarpaulin color is freely selectable (color chart available by email on request). Custom dimensions and versions available upon request. Lettering available in stencil, screen print, or digital print. We would be happy to provide a customized offer. V-drawbar, hot-dip galvanized 13-pin plug and reversing lights 18 mm thick phenolic coated floor plate Side walls made of anodized aluminium with recessed locks, fully removable Lashing rings integrated in the V-exterior frame profile, lashing force 400 kg per lashing ring, Dekra certified Support wheel Price includes vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Upon request we provide a free temporary license plate for transport. We repair trailers of all makes. Further accessories available on request. Technical specifications, pricing, and errors subject to change. No liability for mistakes or printing errors. Features: Reverse-automatic brake, rubber suspension axle, independent suspension, high tarpaulin, support wheel, marker lights, hot-dip galvanized V-drawbar, braked, incl. warranty, 13-pin plug and reversing lights, 18 mm thick floor plate, side walls made of anodized aluminium with recessed locks, fully removable, lashing rings integrated in the V-exterior frame profile, lashing force 400 kg per lashing ring, Dekra certified, 8 tie-down rings.

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized Rcsdpfx Ajl Th Nnecnof * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2014, dolžina tovornega prostora: 9.650 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 12.250 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, Nizkopodvozna prikolica T4 RM 40.0 z nišami za kolesa: spredaj – (D x Š x V) 1900 x 670 x 320 mm, zadaj – (D x Š x V) 1200 x 670 x 210 mm, dolžina tovornega prostora: 6960 mm, možnost razširitve na 3000 mm, višina tovornega prostora: pribl. 920 mm, naklon zadaj: 870 mm, višina zgornje plošče 1500 mm / prednji prostor za shranjevanje pribl. (D x Š) 500 x 2200 mm, 7 x močne pritrdilne točke na vsaki strani / + 2 para na sredini, niša za roko bagra / (D x Š) 2500 x 730 mm, stranske dvižne rampe, ki se premikajo vstran (D x Š) 2900 x 720 mm z vzmetnim dvižnim mehanizmom / pocinkano, okrogla opozorilna luč, 50 mm kroglična prikolica, kamera za vzvratno vožnjo, ABS, EBS, osi SAF, bobnasta zavora, vzmetenje s listnatimi vzmetmi, vozilo se lahko oblije z reklamnimi grafikami in/ali označuje z logotipi. SI87185 Naša ponudba na splošno ne vključuje novega tehničnega pregleda (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo se lahko oblije z reklamnimi grafikami in/ali označuje z logotipi. Veljajo naši splošni pogoji dostave in plačila. Rcsdpfjzw Sfkjx Acnef Z veseljem vam pripravimo ponudbo za financiranje ali lizing tega vozila. Prosimo, stopite v stik z nami!

Stanje: novo, lastna masa: 510 kg, največja dovoljena obremenitev: 1.990 kg, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.100 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,4 m³, barva: drugo, gradbena višina: 2.800 mm, delovna širina: 1.913 mm, Manufacturer: Humbaur Model: Hochlader HT 253115 Permissible total weight: 2,500 kg Payload: 1,990 kg Unladen weight: 510 kg Bed dimensions: 3,100 x 1,850 x 350 mm with high tarpaulin and 2,000 mm hoops Internal clearance height including four-sided digital print with UV protective varnish High-quality truck tarpaulin, 680 g/m² Tyres: 15 inch Loading height: 735 mm Exclusively fitted with premium quality truck tarpaulin (680 g/m²). Tarpaulin colour can be freely selected (colour chart available by email on request). Special dimensions and configurations can be offered at any time. Lettering available in stencil-screen or digital print. Tailored quotations available on request. V-drawbar, hot-dip galvanized immersion bath 13-pin plug and reversing lights 18 mm thick floor plate Side panels made of anodised aluminium with recessed locks, fully removable Lashing rings integrated into the V-shaped outer frame profile, tensile force of 400 kg per lashing ring, Dekra-certified 6 lashing eyes Jockey wheel Humbaur multifunctional lighting integrated into underrun protection Price includes vehicle registration certificate (Zulassungsbescheinigung Teil II and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit number plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or typographical mistakes. Reversing automatic, rubber spring axle, independent suspension, high tarpaulin, jockey wheel, marker lights, V-drawbar, hot-dip galvanized, braked, includes warranty, 13-pin plug and reversing lights, 18 mm thick floor plate, aluminium side panels with recessed locks, fully removable, lashing rings integrated into the V-shaped outer frame, tensile force 400 kg per ring, Dekra-certified, 6 lashing eyes. Redpfx Acow Df Rpsnjcf

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) Rjdpoykx Nkofx Acnjcf ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: Rodpfx Ajykx Nqocnjcf * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (elektronski zavorni sistem) * Naprava za sprostitev v sili za cilindrične vzmetne akumulatorje * Bobnaste zavore * 2 x 7 ton, osi Gigant * Zračno vzmetenje s sistemom za dvigovanje in spuščanje * Povezovalna palica, nastavljiva po višini za 300 mm * Podaljšek povezovalne palice za 250 mm na 2.250 mm * Nadzor tlaka v pnevmatikah s prikazom v kabini tovornjaka prek signala EBS – brez dodatne vgradnje v tovornjak * 15-polni vtič za napajanje * LED osvelitev * Prednja oporna noga * Zunanja, zložljiva oporna noga zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, na desni strani spredaj na čelni steni * Stranska zaščita pred trkom * Plastični blatnik * 50 mm debela deska iz iglastih vrst lesa * Pred čelno steno in zadaj pritrdilna točka za poznejšo namestitev 20-palčnih zapahov * Vijakom pritrjena čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine – trapezno profilirane – zložljive, na sredini enkrat razdeljene * Jeklena zadnja stena, ki se lahko vrine med rami, v primeru, da ni v uporabi, se shrani v notranjosti pred čelno steno * Zadnji nosilci, vijakom pritrjeni * Zunanji okvir z luknjami, približno 45 stopinj, s 2 tonami nosilne sile na vsakih 480 mm * Možnost vgradnje 3-tonskih pritrdilnih obročev na vsakih 600 mm – na vsaki strani nameščenih 4 pritrdilni obroči * V kotih spredaj in zadaj, na vsaki strani po 1 x 6,3 tone nosilne sile * Profifix pritrdilna letva na vzdolžni osi, na sredini, za pritrditev do LC 3000 daN * Na čelni in zaključni nosilci različne luknje za pritrditev do 1,2 tone * Enodelna mehanska rešetasta ploščad za dostop z vzmetnim mehanizmom za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se skupaj potisne do 20 mm) * Naklon za dostop zadaj, približno 860 mm * Podvozje, povezovalna palica, čelna stena, zadnja vrata, zložljive oporne noge in ploščadi za dostop, vroče pocinkane * Os, vzmeti, zračni rezervoar, priključna cev in oporne noge, prebarvani v črno * Stranske stene v barvi RAL 9010, čisto bela * – ojačan in certificiran nadgradnji po EN 12642 XL vključno s potrdilom o varnosti tovora – * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja pridržani Rcjdpfxel Th Dfs Acnef * Na voljo takoj iz Egestrofa

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (elektronski zavorni sistem) * Naprava za sprostitev v primeru izredne potrebe za vzmetne cilindrove zavore * Bobnovi zavori * 2 x 7 ton, osi Gigant * Zračno vzmetenje s sistemom za dvigovanje in spuščanje * Vlečna palica, višina nastavljiva za 300 mm * Podaljšek vlečne palice za 250 mm na 2.250 mm * Nadzor tlaka v pnevmatikah z možnostjo prikaza v kabini tovornjaka prek signala EBS - brez vgradnje na strani tovornjaka * 15-polni vtič za elektriko * LED-osvetlitev * Podpiralna opora spredaj * Zunanja, zložljiva podpiralna opora zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, spredaj na desni strani, na čelni steni * Stranski zaščitni sistem * Plastični četrtni odbijač * 50 mm lesen talni oblog * Pred čelno steno in zadaj, naprava za naknadno montažo 20-palčnih zaklepnih mehanizmov * Vijatična čelna stena iz gladke pločevine Redpfjl Thvxox Acnscf * Stranske stene iz jeklene pločevine – trapezno profilirane – zložljive, na sredini 1x razdeljene * Jeklena zadnja stena, ki jo je mogoče vstaviti med rampe, držalo za uporabo pa je v notranjosti pred čelno steno, kadar ni v uporabi * Zadnji nosilci, vijatični * Zunanji okvir z luknjami, približno 45 stopinj, ukrivljen, z vlečno silo 2 tone na 480 mm * Vgradnja 3-tonskih pritrdilnih čepov je možna na vsakih 600 mm – na vsaki strani je nameščenih 4 pritrdilni obroči * V vogalih spredaj in zadaj je na vsaki strani po 1 pritrdilni obroč s kapaciteto 6,3 tone * Profifix pritrdilna letev v vzdolžni osi, na sredini, za pritrditev do 3000 daN * V čelni in končni nosilni konstrukciji so različne luknje za pritrditev z zmogljivostjo 1,2 tone * Enodelna mehanska rešetasta rampa z vzmetjo za enoosebno uporabo, približno 2.750 x 600 mm (lahko se podaljša do 20 mm) * Zadnja nagibna plošča, približno 860 mm * Podvozje, vlečna palica, čelna stena, zadnja vrata, zložljive podpore in rampe so vroče pocinkane * Osje, vzmeti, zračni rezervoar, priključni spoji in podpiralne opore so pobarvane v črni barvi * Stranske stene v barvi RAL 9010, čisto bela * --ojačana in certificirana nadgradnja po standardu EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja pridržane * Na voljo takoj, dobava iz Egestrofa.

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, Leto izdelave: 2025, ABS Müller Mitteltal ETÜ TA R 11,9 Tandemska nizkotonska prikolica z veliko dodatno opremo: Oprema: 2 dvižna mehanizma za 400 mm visoke jeklene stranske stene, ojačana in certificirana konstrukcija po standardu EN 12642 XL, vključno s certifikatom za pritrditev tovora, 10 kosov UVV pritrdilnih sponk na obstoječem razmaku lukenj na zunanjem okvirju, dodatno leseno dno v sponjeni izvedbi, pnevmatike 235/75R17.5, 4-osna BPV os namesto osi GIGANT, podaljšek platforme za 870 mm na 6.270 mm, enodelne rampe z vroče pocinkanimi rešetkami v nedrseči izvedbi, zaklenljiv orodjarni predal z nosilnostjo 45 kg. Barva: Redpfxjxcxmfo Acnscf * Platišča srebrna * Podvozje/čelna stena/vlečna priprava/zadnja stena/stranske letve/rampe vroče pocinkane * Osi/vzmeti črne * Stranske stene RAL 2011 oranžna Z veseljem vam ponujamo ustrezno financiranje, nakup na obroke ali lizing. Dostava ali pošiljanje po dogovoru. Vedno imamo na zalogi izbor novih naprav in naprave za demonstracijo. Obrnite se na nas! Oddajamo vozila s in brez voznika ter stroje. Vedno je na voljo veliko rabljenih strojev in naprav. Pridržujemo si pravico do tehničnih sprememb, napak in vmesnih prodaj.

Stanje: novo, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 20 lashing rings, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, ramps laterally adjustable, ramps with spring lifting system, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour markings in accordance with regulations, incl. axle load indicators. Surcharge for: steel front wall, galvanized: €500. -- Subject to misprints, errors, and changes. Sample images --. More data at: !, More details: ! Rcsdpfx Aszw Alzjcnsf

Stanje: rabljeno, lastna masa: 3.680 kg, največja dovoljena obremenitev: 10.720 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 12/2021, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55R19,5 156J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R19,5 156J, velikost zadnje pnevmatike: 385/55R19,5 156J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, KOT NOVO, široke pnevmatike, kiper ploščad CINKANA, 12 pritrdilnih obročev, stranske stene 600 mm, doplačilo za rampe 1.000 €, -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, vzorčne slike --, Več podatkov na zahtevo! Rcsdozv I S Dspfx Acnef

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes Rcedpol Thyxefx Acnjf ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: Rcsdpsl Thymsfx Acnef * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, lastna masa: 350 kg, največja dovoljena obremenitev: 950 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.660 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 4,7 m³, barva: drugo, gradbena višina: 810 mm, delovna širina: 2.260 mm, Proizvajalec: Neptun, tip: Multiprikolica GN155, N13-305, večnamenska prikolica. Dovoljena skupna masa: 1300 kg, z zavorami. Nosilnost: 950 kg. Lastna masa: 350 kg. Dimenzije tovornega prostora: 3050 x 1660 x 100 mm. Pnevmatike: 185 R14C. Višina tovornega prostora: 450 mm. Tovor lahko prekucate, pri čemer se uporablja rešetka za listje, višina 80 cm. - Visoka strukturna trdnost zaradi popolnoma varjenega okvirja, hladno upognjenih stranskih delov U-profilnega okvirja in 5 prečnih nosilcev. - Nagibna platforma olajša nakladanje in razkladanje. - Okrepljena vlečna prikolica, vzmetenje z enim kolesom in elementi iz gume na osi zagotavljajo varno in stabilno vožnjo. Rcjdpfxoyw Ez Ij Acnof - Platforma modela 305 multi ima stransko nameščene zadnje luči, tako da lahko med nagibanjem tovorno vozilo naložite neposredno, brez uporabe rampe. Višina roba platforme je le 4 cm. Na voljo so naslednje možnosti: - Trestene ograje na treh straneh, višina: 20 cm, izdelane iz 1,5 mm pločevine in vroče pocinkane. - Vijačni mehanizem, nameščen na sprednji strani prikolice, za vlečenje težkih tovorov, vozil ali quadov, dvigalni element za nagibno platformo. Cena vključuje vozilne dokumente (potrdilo o registraciji, del II, in COC-dokumente). Na zalogi imamo veliko število prikolic naslednjih proizvajalcev: Brenderup, Humbaur, Cheval Liberte, Hapert, Brian James Trailers. Na željo vam lahko zagotovimo brezplačne registrske tablice za prevoz. Prikolice vseh proizvajalcev popravljamo. Dodatna oprema je na voljo po povpraševanju. Pridržujemo si pravico do tehničnih sprememb, sprememb cen in napak. Ne odgovarjamo za napake in tiskarske napake. Gumna vzmetna os, vzmetenje z enim kolesom in elementi iz gume na osi zagotavljajo varno in stabilno vožnjo, tovorno površino lahko naklonite, ima podporno kolo, obrobne luči, vroče pocinkana, z zavorami, vključno z garancijo, visoka strukturna trdnost zaradi popolnoma varjenega okvirja, hladno upognjenih stranskih delov U-profilnega okvirja in 5 prečnih nosilcev, nagibna platforma olajša nakladanje in razkladanje, okrepljena vlečna prikolica, platforma modela 305 multi ima stransko nameščene zadnje luči, tako da lahko med nagibanjem tovorno vozilo naložite neposredno, brez uporabe rampe. Višina roba platforme je le 4 cm.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WSM00000005204913, lastna masa: 8.738 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, naslednji pregled (TÜV): 09/2026, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, stanje pnevmatik: 70 odstotek, barva: bela, Leto izdelave: 2018, obratovalne ure: 14.000 h, 2018 VI Hladilna enota - SCHMITZ Rsdpfxsyhcyzj Acnjcf 1 LASTNIK, SERVISNA ZGODOVINA 7 cm stena 4 ključavnice Dvojna paluba 14000 delovnih ur MOŽNA PRODAJA 10 ALI VEČ ENOT. VELIKA KOLIČINA - NIŽJA CENA TELEFON, WHATSAPP, VIBER +37061546814 LITVA, KLAIPEDA Podjetje AGROLOGISTIKA

Stanje: rabljeno, največja dovoljena obremenitev: 1.950 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 115 mm, skupna širina: 2.540 mm, skupna višina: 640 mm, PKW-Transportanhänger Fabr. STEMA, Typ FTAK 27-40-21.2, Gesamtgewicht: 2.700 kg, auflaufgebremst, Seilwinde WAP901, Tieflader, hydraulisch kippbar Grundrahmen: Extrem stabil und verwindungsfrei mit crash-getesteter Sicherheits-V-Deichsel. Kippbare, robuste Rahmenkonstruktion mit Sicherheitsverschlüssen. Sämtliche Rahmenteile sind im Tauchbad feuerverzinkt und daher korrosionsbeständig. Laufschienen: Extrabreite, gelochte, rutschfeste Laufschienen aus Zinkblech mit großen Langlöchern zum sicheren Fixieren der Spanngurte. Die überbreite Laufschiene ermöglicht den problemlosen Transport von Fahrzeugen mit verschiedenen Radständen. Angebaute Auffahrschienen sorgen für ein einfaches Be- und Entladen. Bordwände: Signalrote Pulverbeschichtung (korrosionsfrei und kratzunempfindlich) für mehr Sicherheit. Fhz. nicht aufbereitet ...u.v.a.m. Irrtümer und Zwischenverkauf vorbehalten. Rcedeyn Ubqopfx Acnjf

Stanje: rabljeno, največja dovoljena obremenitev: 1.950 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 115 mm, skupna širina: 2.540 mm, skupna višina: 500 mm, A25 GW26NG000031 PKW-Transportanhänger, proizvođač STEMA, tip FTAK 27-40-21.2, Ukupna masa: 2.700 kg, sa inercionom kočnicom, vitlo WAP901, niskopodni, hidraulično nagibni. Osnovni okvir: Iznimno stabilan i otporan na uvijanje sa sigurnosnom V-vučnom ručkom testiranom na sudar. Nagibna, robusna konstrukcija okvira sa sigurnosnim bravama. Svi dijelovi okvira su uronjeni i vruće pocinčani, što ih čini otpornim na koroziju. Vodilice: Ekstra široke, perforirane, protuklizne vodilice od pocinčanog lima s velikim izduženim otvorima za sigurno učvršćivanje veznih traka. Široka vodilica omogućuje laku prevoz vozila s različitim međuosovinskim razmacima. Ugrađene rampe za lakše utovar i istovar. Bočne stranice: Signalno crvena plastificirana zaštita (otporna na koroziju i ogrebotine) za veću sigurnost. Vozilo nije pripremljeno ...i mnogo više. Zadržavamo pravo na greške i međuprodaju. Rcedpfxeyn Ucbj Acnef

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 14,2 kW (19,31 KM), vrsta goriva: dizel, barva: rumena, obratovalna teža: 2.030 kg, dvižna višina: 3.275 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, širina izkopne žlice: 400 mm, Leto izdelave: 2025, obratovalne ure: 5 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, klimatska naprava, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, zaščita za glavo, The Berger Kraus BK2000NKSR with KUBOTA engine is a robust excavator designed for foundation work, fencing, connection and landscaping applications. The excavator features an electric air conditioning system, adjustable undercarriage, swing boom, hydraulic quick coupler, hydraulic thumb, and much more. Model BK2000NKSR including extensive accessory package! Features: - Electric air conditioning mounted on the rear cabin wall - Hydraulic thumb - Hydraulic quick coupler for easy attachment change without leaving the cab - Adjustable undercarriage: 1025-1275 mm - Swing boom Our machines are sold as demonstration vehicles, since loading and unloading for transport and minor test drives may result in up to 5 operating hours. Every excavator purchased from us comes with a CE certificate, an invoice with VAT shown, and a German-language operating/repair manual. We also offer commercial financing, spare parts sourcing, and excellent service! Sales also available to private customers! This machine is AVAILABLE IMMEDIATELY! Technical Specifications: - Model: BK2000NKSR with swing boom and adjustable undercarriage - Hydraulic joysticks - Manufacturer: Berger Kraus - Operating weight: 2,030 kg - Engine: KUBOTA D1105, 3-cylinder, water-cooled (diesel), Euro 5 - Rated power: 14.2 kW / 2200 rpm - Engine displacement: 1,123 l - Main pump: TaiFeng piston pump 39.6 l/min - Swing motor: EATON - Travel motor: EATON with planetary gearbox - Two travel speeds: high and low - Maximum pressure: 220 bar - Hydraulic oil tank capacity: 15.3 l - Fuel tank capacity: 18 l Working ranges: - Max. digging reach: 3,610 mm - Max. digging depth: 2,150 mm - Max. reach: 3,275 mm - Max. dumping height: 2,310 mm - Max. vertical digging depth: 1,740 mm - Minimum turning radius: 1,580 mm - Max. bucket lift height: 275 mm - Max. blade digging depth: 180 mm - Boom swing left: 390 mm - Boom swing right: 510 mm - Swing radius: 360° Dimensions: Redox El Uwepfx Acnjcf - Overall dimensions: 3,475 x 1,025-1,275 x 2,455 mm - Total track length: 1,590 mm - Undercarriage width: 1,025-1,275 mm - Ground clearance: 473 mm - Track width (rubber): 230 mm - Turning radius: 790 mm Accessory package: - Hydraulic quick coupler pre-installed - Hydraulic thumb pre-installed - Hydraulic grading bucket 1000 mm - Hydraulic breaker - Bucket 200 mm - Bucket 400 mm - Grapple for wood, kerbstones, manure, and more - Ripper tooth - Rake - Earth auger 20 cm diameter - Toolbox Warranty according to legal requirements. As a licensed partner for Berger Kraus and Martz, we are your contact for spare parts, additional attachments, and any questions regarding your new machine. All information without guarantee. Subject to errors and changes.