Max Trailer Nizki Nakladalnik nakup rabljenega (34.271)

Stanje: novo, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, MAX Trailer Type 100 NEW | Extendable | 39t Payload | 3 Axles | from €66,900 New vehicle – individually configurable to suit your application. High payload capacity with rugged construction and maximum cost-efficiency. --- Highlights: • Approx. 39,600 kg payload • Loading platform 8,600 mm + 5,400 mm extendable • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system --- Technical Data: Tjdjypa Npepfx Agtjc • Gross vehicle weight: 49,500 kg • Unladen weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm • Overall width: 2,540 mm • Speed: 80 km/h --- Standard Equipment: • Extendable loading platform with durable hardwood floor • Galvanised steel ramps with hydraulic lifting mechanism • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) --- Included Options: • Spare wheel with holder • Galvanised front wall (approx. 400 mm) • Electro-hydraulic power pack under loading platform • Extendable warning signs with LED • Reflective tape in accordance with EU regulations • Rotating beacon holder at rear • Ramp control valves on right side Additional equipment and individual adaptations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: zelo dobro (rabljeno), prva registracija: 06/2018, barva: drugo, Leto izdelave: 2018, Konfiguracija Letnik izdelave: 2018 = Dodatne informacije = Lastna teža: 6.630 kg Nosilnost: 23.370 kg Dovoljena skupna masa: 30.000 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Registrska številka: QAKP268 Tjdpoy H Ewbefx Agtoc = Informacije o podjetju = Če imate kakršna koli vprašanja ali predloge, nas brez obveznosti kontaktirajte. Zagotavljamo odgovor v 8 urah. Cene so brez DDV. Iz navedenih informacij se ne morejo izpeljati nobene pravice. Telefonska številka pisarne: MOB: (Na voljo na WhatsAppu in Viberju: nizozemščina – angleščina – nemščina – francoščina – španščina – italijanščina) MOB: (Na voljo na WhatsAppu in Viberju: nizozemščina) Pri plačilu z bančnim nakazilom je treba denar nakazati na spodnji bančni račun. Vedno preverite podatke o plačilu, ki so navedeni na naši spletni strani. Če ste prejeli drugačne informacije, nas kontaktirajte. Če imate kakršne koli dvome, nas pokličite, da lahko preverimo račun in/ali plačilo. Bančni podatki: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/DDV/DAVK: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 02/1996, vzmetenje: zrak, velikost pnevmatike: 265/70 R 19.5, medosna razdalja: 5.000 mm, Leto izdelave: 1996, = Dodatne možnosti in oprema = - Zračno vzmetenje = Dodatne informacije = Konfiguracija osi: Velikost pnevmatik: 265/70 R 19.5 Znamka osi: BPW Zavore: bobnaste zavore Vzmetenje: zračno Tsdpozvczgofx Agtec Prednja os: Dvojna montaža; Krmiljena; Profil pnevmatike levo znotraj: 80%; levo zunaj: 80%; desno znotraj: 80%; desno zunaj: 80% Zadnja os: Dvojna montaža; Profil pnevmatike levo znotraj: 65%; levo zunaj: 65%; desno znotraj: 65%; desno zunaj: 65% Teže Lastna teža: 4.600 kg Nosilnost: 15.400 kg Dovoljena skupna masa: 20.000 kg Funkcionalno Višina nakladalne površine: 105 cm Stanje Poškodbe: nobene Identifikacija Registrska številka: WP-66-LH

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, skupna masa: 24.000 kg, konfiguracija osi: > 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.940 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed Todpei Ri Dajfx Agtec 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with holder, operated via parking light (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Stanje: rabljeno, številka stroja/vozila: NR9AGM303T1398021, skupna dolžina: 13.600 mm, skupna širina: 3.000 mm, Leto izdelave: 2026, Neuporabljena prikolica Önder AGM3, 56 ton – izdelana leta 2026 – naprodaj pri BIG Machinery Ta neuporabljena prikolica Önder AGM3, 56 ton, je zdaj na voljo pri BIG Machinery na Nizozemskem. Prikolica je bila izdelana leta 2026 in je izdelana iz jekla S355JR. Dovoljena bruto masa je 56.000 kg, dovoljena obremenitev pete je 36.000 kg, opremljena pa je s tremi osmi, pri čemer je dovoljena obremenitev posamezne osi 12.000 kg. Prikolica ima tovorno površino dolžine 9.300 mm in pnevmatike 275/70 R22.5. • Model: Önder AGM3 • Leto: 2026 Todpjztdd Djfx Agtsc • Stanje: Neuporabljena • Material: Jeklo S355JR • Dovoljena bruto masa: 56.000 kg • Os: 3 • Obremenitev osi: 3 × 12.000 kg = 36.000 kg • Dovoljena obremenitev pete: 36.000 kg • Tehnično dovoljena maks. dovoljena masa vlečnega vozila (T): 20.000 kg • Bruto masa ob izvozu (prazna/za transport): 33.000 kg • Celotna dolžina: 13.600 mm • Dolžina tovorne površine: 9.300 mm • Zunanja širina: 3.000 mm • Širina tovorne površine (notranja, med okvirji): 2.540 mm • Višina rampe/prikolice s peto: 2.950 mm • Oddaljenost od tal/najnižja točka tovorne površine: 110 mm • Razmik osi: 7.500 mm • Velikost pnevmatik: 275/70 R22.5 Ali vas zanima ta neuporabljena prikolica Önder AGM3, 56 ton? Za več informacij, podrobnosti o pregledu ali ponudbo se obrnite na BIG Machinery. Dostavljamo po vsem svetu in lahko uredimo celotno izvozno dokumentacijo in transport iz našega sedeža na Nizozemskem. Zakaj izbrati BIG Machinery? Pri BIG Machinery izkoriščate več kot 30 let izkušenj na področju trgovanja z novimi in rabljenimi stroji. Z našim sedežem na Nizozemskem, predano in usklajeno ekipo ter obsežnimi strokovnimi znanjem na področju pomorskega transporta zagotavljamo zanesljivo in hitro dostavo po vsem svetu. Odlikujemo se po konkurenčnih tržnih cenah, skrbno izbranih strojih in zagotavljanju dolgoročnega partnerstva. Z našimi lastnimi transportnimi storitvami zagotavljamo brezhibno in učinkovito storitev od začetka do konca. Izberite BIG Machinery kot svoj zanesljivega partnerja in odkrijte, zakaj smo najboljša izbira za stranke po vsem svetu. Kakovost, hitrost in zanesljivost – Kupujte pri BIG!

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: oranžna, Leto izdelave: 1995, ACTM S38315 CHC Leto izdelave: 1995 3 osi Listnato vzmetenje Skupna masa: 34.000 kg Lastna masa: 6.800 kg 3 osi Listnato vzmetenje Interna številka: 25A042 Znamka: Drugo = Dodatne informacije = Tjdpfjz A E Iyjx Agtjc Lastna teža: 6.800 kg Nosilnost: 27.200 kg Največja dovoljena masa: 34.000 kg

Stanje: rabljeno, konfiguracija osi: > 3 osi, prva registracija: 01/2019, skupna dolžina: 13.800 mm, skupna širina: 2.750 mm, skupna višina: 3.200 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2019, Oprema: ABS, = Dodatne možnosti in dodatna oprema = Drugo - Dvigalna os Drugo - Os za krmiljenje = Opombe = Šasi Premer spojnega bolta / sedelne sklopke: 2 palca Višina spojnega bolta / vlečne palice: 120 cm Bobnasta zavora: ✓ Posebni transport Dvodelne cestne plošče: ✓ Hidravlične rampe: ✓ Dolžina tovorne površine: 920 cm (1420 cm, podaljšana) Nizkopodna prikolica: ✓ Maksimalna širina: 325 cm Maks. dolžina: 1420 cm Tedpfx Agszc Eiujtoc Možnost podaljšanja: ✓ Možnost izvlečenja: ✓ = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 245/70 R17.5 Znamka osi: Bpwecoplus Zavore: Bobnaste zavore Vzmetenje: Zračno vzmetenje Prednja os 1: Dvojne pnevmatike; profil pnevmatik, levi zunanji rob: 45 %; profil pnevmatik, desni zunanji rob: 45 % Prednja os 2: Dvojne pnevmatike; profil pnevmatik, levi zunanji rob: 30 %; profil pnevmatik, desni zunanji rob: 55 % Srednja os: Dvojne pnevmatike; profil pnevmatik, levi zunanji rob: 25 %; profil pnevmatik, desni zunanji rob: 20 % Zadnja os 1: Dvojne pnevmatike; krmilna; profil pnevmatik, levi zunanji rob: 45 %; profil pnevmatik, desni zunanji rob: 50 % Zadnja os 2: Dvojne pnevmatike; krmilna; profil pnevmatik, levi zunanji rob: 35 %; profil pnevmatik, desni zunanji rob: 35 % Teže Maks. dovoljena masa: 84.000 kg Identifikacija Registrska številka: N2627491 = Informacije o podjetju = Za več informacij o tej napravi pokličite na: ali pošljite e-pošto na: . Celoten pregled zaloge najdete na: . Prosimo, da se naročite na naše novice, da boste prejemali tedenske posodobitve o naši zalogi.

Stanje: rabljeno, konfiguracija osi: > 3 osi, prva registracija: 04/2007, skupna dolžina: 23.880 mm, skupna širina: 2.550 mm, vzmetenje: zrak, Leto izdelave: 2007, Dodatne informacije: Znamka: VOLVO Model: FH 16 750 Tip: vlečna enota Letnik: 08.2015 Prevožena razdalja: 578339 km VIN: ... A777655 Število osi: 8x4 Medosna razdalja: 3900 mm Motor: D16K750 VEB+ 552 Kw / 750 KM / Euro 6 Menjalnik: I-Shift (ATO3512E) + zaviralnik Vzmetenje: zračno / zračno Zavore: diskovne Dimenzije: D/Š: 7440 mm / 2550 mm Mase: polna/prazna: 44000 kg / 12230 kg GVW 180 ton / DOLLY / ZAVIRALNIK / GLOBE XL CENA SAMO ZA VOLVO: 98900,00 EUR Znamka: VANG Model: Athls 111+1 Tip: nizkopodvozna prikolica Letnik: 04.2007 Vzmetenje: zračno Zavore: bobnov Dimenzije: D/Š: 23880 mm / 2550 mm Mase: polna/prazna: 75000 kg / 18140 kg CENA SAMO ZA PRIKOLICO: 64900,00 EUR Letnik modela: 2007 Vrsta vzmetenja: zračno Zavore: bobnov Vrsta vzmetenja: zračno Zavore: bobnov Vrsta vzmetenja: zračno Zavore: bobnov Krmiljenje: krmiljenje Vrsta vzmetenja: zračno Krmiljenje: krmiljenje Zavore: bobnov = Več informacij = Vzmetenje: zračno vzmetenje Srednja os 1: krmiljenje Zadnja os: krmiljenje Tedsznkf Dspfx Agtjc Prazna teža: 18.140 kg Nosilnost: 56.860 kg GVW: 75.000 kg Za več informacij se obrnite na Marka Ševtšenka ali Alejandra Goyenecheja.

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 Tjdpok Aht Uefx Agtsc - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 12/2013, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, skupna višina: 3.450 mm, vzmetenje: jeklo, velikost pnevmatike: 245/70R17,5, barva: modra, Leto izdelave: 2013, Goldhofer TU 3-24/80. Letnik izdelave: 2013. 10-tonske osi BPW. Maksimalna teža: 30.000 kg. Jeklena vzmetna vzmet. EBS, ABS, ALB. Mehanske rampe: - Dolžina: 2750 mm. Dimenzije nakladalne površine: D: 8300 mm. Š: 2550 mm. V: gooseneck: 1040 mm. V: nakladalna površina: 900 mm. Pnevmatike: 245/70R17,5 (60 %). Dimenzije: D: 10.900 mm. Š: 2550 mm. V: 3450 mm. Nemški priklopnik! ID št.: 432. Za vse oglase, ponudbe in ponudbe podjetja Heinhuis ter za vse pogodbe, sklenjene s podjetjem Heinhuis, in za predhodna pogajanja veljajo splošni pogoji poslovanja podjetja Heinhuis. S kakršnim koli stikom potrjujete veljavnost splošnih pogojev poslovanja podjetja Heinhuis in potrjujete, da ste se z njimi seznanili. Naše cene so neto izvozne cene. = Dodatne informacije = Konfiguracija osi Mere pnevmatik: 245/70R17,5 Znamka osi: BPW Tsdpfxsz Ha S Ue Agtjc Vzmetenje: listnato vzmetenje Sprednja os: dvojne pnevmatike; maks. obremenitev osi: 10000 kg; krmilna; profil pnevmatik, levo notranji: 60 %; profil pnevmatik, levo zunanji: 60 %; profil pnevmatik, desno notranji: 60 %; profil pnevmatik, desno zunanji: 60 % Zadnja os 1: dvojne pnevmatike; maks. obremenitev osi: 10000 kg; profil pnevmatik, levo notranji: 60 %; profil pnevmatik, levo zunanji: 60 %; profil pnevmatik, desno notranji: 60 %; profil pnevmatik, desno zunanji: 60 % Zadnja os 2: dvojne pnevmatike; maks. obremenitev osi: 10000 kg; profil pnevmatik, levo notranji: 60 %; profil pnevmatik, levo zunanji: 60 %; profil pnevmatik, desno notranji: 60 %; profil pnevmatik, desno zunanji: 60 % Teže zGG: 30.000 kg Funkcionalnost Višina nakladalne površine: 90 cm Stanje Tehnično stanje: dobro Vizualno stanje: dobro = Informacije o podjetju = Za več informacij:

Stanje: novo, Lastna teža: 13.170 kg Nosilnost: 33.830 kg Dovoljena skupna masa: 47.000 kg Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Tsdpfxoz Hlrye Agtsc Vizualno stanje: zelo dobro Odgovorna oseba/podjetje v EU: Gomez Trading Holland B.V., Spitsstraat 29C, 91205 Raalte, Nizozemska.

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2010, Oprema: ABS, Znamka: Drugo ACTM 46315 C /HC Listnato vzmetenje Razširitev Hidravlične rampe 2 x podpore Krmilna os : 34.000 kg Interna številka: 26A008 KRMILNA OS Tsdpfx Agoz A E Tpetjc = Nadaljnje informacije = Lastna teža: 8.400 kg Nosilnost: 25.600 kg Dovoljena skupna masa: 34.000 kg

Stanje: rabljeno, številka stroja/vozila: SCKD00000N520xxxx, Leto izdelave: 2022, Na zahtevo posredujemo referenčno številko: 24333 Tehnični podatki: Letnik izdelave: 2022 Število osi: 2 Notranja dolžina: približno 3,67 m Notranja širina: približno 1,80 m Skupna dolžina: 563,2 cm Lastna teža: 789 kg Maksimalna nosilnost: 2.711 kg Samo en lastnik Na voljo takoj Opis: Prikolica je bila uporabljena za transport tovornjaka Giant ali dvižne ploščadi. Na voljo takoj. Tedpfozy Nk Nex Agtec Lastna teža: 789 Skupna teža: 3500 Nosilnost: 2711 Širina: 230,8 Dolžina: 563,2 = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2012, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.530 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, medosna razdalja: 1.400 mm, Leto izdelave: 2011, Pogonski sklop Pogon: Kolesni Konfiguracija osi Dimenzija pnevmatik: 245/70R17.5 Vzmetenje: zračno vzmetenje Zadnja os 1: dvojna montaža Zadnja os 2: dvojna montaža Tjdpfx Agjw I R S Setec Zadnja os 3: dvojna montaža; krmiljena Teže Lastna teža: 10.480 kg Nosilnost: 40.770 kg Dovoljena skupna masa: 51.250 kg Funkcionalno Znamka nadgradnje: NOOTEBOOM OSDS-41-03 Višina nakladalne površine: 93 cm

Stanje: rabljeno, največja dovoljena obremenitev: 36.515 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, naslednji pregled (TÜV): 05/2027, Oprema: ABS, Izvod opreme: V-priklop: V-priklop s poševnimi robovi, spredaj pribl. 45° in zadaj pribl. 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN). Tla iz trdega lesa, debeline pribl. 30 mm. Platforma z raztegljivo izvedbo: Platforma z raztegljivo izvedbo in zadaj poševnimi robovi pribl. 1.000 mm x 8°. 5 parov pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 5.000 daN). 3 pari pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno na sprednjem delu platforme (LC 10.000 daN). Tla iz trdega lesa, debeline pribl. 48 mm, nad osmi rebrasto jeklo. Osi: Osi BPW in vzmetenje, vse osi so hidravlično-mehansko prisilno usmerjene. Tehnična obremenitev osi: 12.000 kg na os. Zračno vzmetenje z ventilom za dvig in spuščanje. Orodje za osi. Pnevmatike: Pnevmatike 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) – znamka po naši izbiri. Podporne noge: JOST podporne noge (mehanske) z 2-stopenjskim menjalnikom za pribl. 24 t nosilnosti (pribl. 50 t testna obremenitev). Zavorna sistema: Zavorna sistema v skladu z direktivami EU s sistemom EBS-E (2S2M) brez povezovalnih vodov do vlečne enote. Lakiranje: Odlična in dolgotrajna protikorozijska zaščita standardno peskanega jeklenega okvirja, zagotovljena s 2-komponentno (2K) osnovo z večjo vsebino cinka. Kakovostno 2-komponentno (2K) končno lakiranje v eni barvi, RAL 3002, karminska rdeča. Zadnji del je metaliziran in lakiran v RAL 9010 (čista bela). Metalizirano lakiranje ni mogoče. Jeklena konstrukcija: Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa). Električna napeljava: Električna napeljava v skladu z direktivami EU, razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX na sprednji priključni plošči z vtičnicami 24N, 24S in 15-polna. Priključek v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098. Vključeno naslednje dodatne opreme: - 2-palčni kraljevi zatič - pocinkana jeklena sprednja plošča, pribl. 400 mm visoka - rumeno-rdeče zračne spojke na pocinkani sprednji priključni plošči - 4 klini z nosilci na sprednji plošči (± 5 kg) Tjdpfozqiiasx Agtoc - nosilec za rezervno kolo pred sprednjo ploščo - elektro-hidravlična agregat (± 45 kg) - dodatno krmiljenje od spredaj in zadaj s kabelskega daljinskega upravljalnika preko gumbov, z nadzorom enoslednosti osi (brez vgradnje v vlečno enoto) - nosilec na zadnjem delu V-priklopa za aluminijaste rampe - evropske odsevne table (rdeče-rumene) na zadnjem delu prikolice - rumen odsevni trak v skladu z direktivami EU na straneh, na raztegljivi platformi in na zadnji strani prikolice - na V-priklopu in zadnji plošči, na levi in desni strani, po en nosilec za opozorilne table, vključno z vtičnico - nosilec za okroglo luč na zadnji strani prikolice - pocinkani zložljivi nosilci pod poševnino platforme - odbijač blata na zadnji strani prikolice - priročnik in opis na USB-pomnilniku - nalepka za omejitev hitrosti 80 km/h na zadnji strani in na obeh straneh - manometer za obremenitev osi, za ugotavljanje obremenitve osi, vključno z diagramom obremenitve.

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.500 mm, skupna višina: 32.000 mm, Leto izdelave: 2024, Oprema: ABS, Za vprašanja v zvezi z vozilom vam je na voljo gospod Seidel (na tel. št.). Wörmann BauTL 105 55/200 nizkopodna prikolica: SAE-SMB osi, bobnaste zavore, Knorr ABS, vzmetno-hidravlični zavorni valj, 40 mm vlečna zanka, duomatik, notranje mere tovornega prostora: dolžina 5.600 mm, širina 1.990 mm, višina 400 mm, profil pnevmatik: 1. os 14 mm, 2. os 13 mm. Na željo vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel (tel.) vam z veseljem pomaga. Dodatne informacije najdete na naši spletni strani. ... Spremembe, napake in vmesna prodaja so pridržane!!!- = Dodatne informacije = Tjdpfxjyfqa Ds Agtsc Lastna teža: 2.700 kg Nosilnost: 7.800 kg Skupna dovoljena teža: 10.500 kg Za več informacij se obrnite na Tobiasa Eberta.

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Tsdek Ahugjpfx Agtec Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards Tsdpfeunrapox Agtsc - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2019, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: siv, Leto izdelave: 2019, Faymonville F-S43-1AAF Tedpfezinblex Agtjc 660 cm, možnost podaljšanja Hidravlične rampe Vitli Prisilno usmerjeno = Dodatne informacije = Velikost pnevmatik: 245/70R17.5 Vzmetenje: zračna vzmet Prednja os: dvojne pnevmatike; usmerljiva; profil pnevmatike, levi notranji del: 50 %; profil pnevmatike, levi zunanji del: 50 %; profil pnevmatike, desni notranji del: 50 %; profil pnevmatike, desni zunanji del: 50 % Osrednja os: dvojne pnevmatike; usmerljiva; profil pnevmatike, levi notranji del: 50 %; profil pnevmatike, levi zunanji del: 50 %; profil pnevmatike, desni notranji del: 50 %; profil pnevmatike, desni zunanji del: 50 % Zadnja os: dvojne pnevmatike; usmerljiva; profil pnevmatike, levi notranji del: 50 %; profil pnevmatike, levi zunanji del: 50 %; profil pnevmatike, desni notranji del: 50 %; profil pnevmatike, desni zunanji del: 50 % Lastna teža: 13.500 kg Nosilnost: 47.500 kg Dovoljena skupna masa: 61.000 kg Številka modela: F-S43-1AAF / PODALJŠAN / HIDRAVLIČN = Informacije o podjetju = VSE CENE SO NETO ZA IZVOZ (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT). Govorimo rusko. Prizadevamo si, da bi navedli čim bolj natančne informacije. Kljub temu iz objavljenih besedil ne moremo izpeljati nobenih pravic.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.300 kg, dovoljena osna obremenitev (os 2): 10.300 kg, dovoljena osna obremenitev (os 3): 10.300 kg, prva registracija: 08/2013, vzmetenje: zrak, velikost pnevmatike: 265/70R19.5, barva: modra, Leto izdelave: 2013, = Further options and accessories = - Air suspension = Notes = HRD STTM3N – Low loader – Extendable – SAF axle – Steering axle Year of manufacture: 7-8-2013 W09STTM3NCEN10148 Extendable Steering axle SAF axle = Further information = Axle configuration Tyre size: 265/70R19.5 Axle make: SAF Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 10,300 kg; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Rear axle 2: Twin tyres; Max. axle load: 10,300 kg; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Rear axle 3: Twin tyres; Max. axle load: 10,300 kg; Steering; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Weights Unladen weight: 10,800 kg Payload: 40,100 kg Gross vehicle weight: 50,900 kg Tjdpsy Rxrmsfx Agtoc Condition Technical condition: good Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/1992, barva: drugo, Leto izdelave: 1992, Os 1: levo 10-10 mm, desno 10-10 mm Todezqy E Sepfx Agtoc Os 2: levo 8-8 mm, desno 8-8 mm Os 3: levo 6-6 mm, desno 6-6 mm = Več informacij = Nosilnost: 35.000 kg

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Further options and accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = TECHNICAL SPECIFICATIONS MASSES & DIMENSIONS - Gross Vehicle Weight (kg): 70,000 - Loading Platform Length (mm): 9,000 - Weight of Axle Group (kg): 48,000 - Total Length (mm): 13,550 - Kingpin Capacity (kg): 22,000 - Total Width (mm): 2,550 - Curb Weight (kg): 13,000 - Loading Platform Height (mm): 920 - Pay Load (kg): 57,000 - Height of 5th Wheel (mm): 1,310 CONSTRUCTION - Base chassis - Heavy-duty, high-durability BOX-type chassis, fully welded, S355 steel - Outer frame profile: UPE 240 - Welding (Chassis): Automatic submerged arc process - Welding (Superstructure): Robotic welding - Axle (Brand/Type): Özkoç Trax or Osman Koç, Turkish make - Drum brakes: Four axles, 12-ton each - Axle lifting: 1st axle automatic, 4th axle manual lifting - Suspension: Air suspension - Steering axles: -- - King pin (Type): Single-position, 1x coupling pin 2” - Tyres: 16+1 units, 245/70 R17.5 - Rims: 16+1 units, 6.75 x 17.5 steel - Landing gear: Mechanically operated from one side, two-speed - Brake system: Wabco EBS (4S/3M) with RSS, EC-compliant, with ADR adaptation - Brake chambers: 2 axles with 4 emergency brake chambers, 2 axles with 4 service brake chambers Electrical System - 24V, 2x7 + 1x15 pin sockets, SAE standard, SABA brand, ADR-compliant - 2 x rear stop lights, 4 x side LED lights - 2 x white LED lights, 2 x front LED lights - 2 x registration plate lights, 2 x rotating lights Floor - Above wheels and platform edges covered with checker plate and hardwood - Central surface covered with smooth sheet steel Rear Loading Ramps - Hydraulic rear ramps with electric pump (cable-controlled) - Remote control push-button - Foldable rear ramps, length: 2500 mm + 1500 mm, width: 900 mm - Rear ramps with internal and external hydraulic sliding - Short steel ramps behind the neck Coating Process Tedpfxoyil Ihj Agtsc - Sandblasted, chemically cleaned, HYZINC-coated, epoxy primed, finished with two coats of acrylic paint TECHNICAL SPECIFICATION ACCESSORIES - 2 x 8 heavy-duty lashing rings (mushroom type), mounted to outer frame - 4 x certified spray mud flaps - 1 x plastic water tank - 2 x wheel chocks with holders - 2 x 8 galvanized side extension brackets (250 mm + 250 mm) - 2 x side guards, aluminium - 1 x toolbox - 1 x spare wheel carrier with one tire (on gooseneck) - 2 x manual support legs at the rear - 2 x reflective tapes and reflector plates, rear and side - 2 x side extension reflectors - Steel front panel (height: 400 mm) - Aluminium side panels on gooseneck section (height: 400 mm) - 1 plate mounting point on rear ramps or bumper = Further information = Unladen weight: 13,000 kg CE marking: yes

Stanje: rabljeno, konfiguracija osi: > 3 osi, prva registracija: 04/2007, skupna dolžina: 23.880 mm, skupna širina: 2.540 mm, vzmetenje: zrak, Leto izdelave: 2007, Dodatne informacije: Znamka: VANG Model: Athls 111+1 Tip: prikolica z nizko nosilnostjo Letnik: 04.2007 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 23880 mm / 2550 mm Mase: bruto/neto: 75000 kg / 18140 kg Znamka: VOLVO Model: FH 16 750 Tip: traktor Letnik: 08.2015 Prevožena razdalja: 578339 km VIN: ... A777655 Število osi: 8x4 Medosna razdalja: 3900 mm Motor: D16K750 VEB+ 552 Kw / 750 KM / Euro 6 Menjalnik: I-Shift (ATO3512E) + retarder Vzmetenje: zračno / zračno Zavore: diskovne Dimenzije: D/Š: 7440 mm / 2550 mm Tjdpoyrbtbefx Agtsc Mase: bruto/neto: 44000 kg / 12230 kg Bruto kombinirana masa: 180 ton / DODATNA OSPRAVA / RETARDER / GLOBE XL Vrsta vzmetenja: zračno Zavore: bobnaste Vrsta vzmetenja: zračno Zavore: bobnaste Vrsta vzmetenja: zračno Zavore: bobnaste Vrsta vzmetenja: zračno Zavore: bobnaste Letnik modela: 2007 = Več informacij = Vrsta vzmetenja: zračno Lastna teža: 18.140 kg Nosilnost: 56.860 kg Dovoljena skupna masa: 75.000 kg Za več informacij se obrnite na Marka Ševtšenka ali Alejandra Goyenecheja.

Stanje: novo, Leto izdelave: 2026, = Additional Options and Accessories = Tsdpfx Agszrd Iyotsc - Spare wheel = Notes = Masses & Dimensions: The vehicle has a gross weight of 90,000 kg, a payload capacity of 80,000 kg, and an unladen weight of 15,540 kg. The kingpin load is 22,000 kg, and the axle group load is 64,000 kg. The loading platform measures 11,250 mm in length, with an overall length of 15,650 mm, a width of 3,000 mm, and a loading height of 1,350 mm. The kingpin height at the fifth wheel is 1,400 mm. Construction & Chassis: The chassis consists of a heavy-duty I-beam frame constructed from fully welded S355-grade steel, with a UPE 240 outer frame for enhanced durability. The chassis is welded by automatic submerged arc welding, and the superstructure is assembled using robotic welding processes. The vehicle is equipped with 4 x 16-ton Özgül drum-brake axles, mechanical leaf spring suspension (12–14 leaves), a single-position, EU-approved 2" kingpin (Çayırova brand), 16+1 12 R 22.5 tyres on 9.00 x 22.5 steel rims, and two-speed mechanically operated landing gear (Gos brand). Technical Features & Accessories: The braking system is a dual-circuit air brake system with emergency and service brake chambers. The 24V electrical system meets SAE/ADR standards and provides all-round lighting. The loading platform is a combination of 6/7 mm chequered steel plate with wooden edge boards, and the hydraulically operated rear loading ramps (2,800 x 900 mm) are reinforced with steel bars. = Further Information = Unladen weight: 15,540 kg CE marking: yes

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2011, Oprema: ABS, Znamka: Other ACTM S46315 Zračno vzmetenje : 34.000 kg Tedpfez A E Nqsx Agtoc Razširitev 3 metre Hidravlične rampe Nastavljive rampe Premični labodji vrat Interna številka: 26A006 = Dodatne informacije = Lastna masa: 9.480 kg Nosilnost: 24.520 kg Skupna dovoljena masa: 34.000 kg