Nizki nakladalnik

NOOTEBOOM OSDS-41 KG

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper Gksdpohlz S Njfx Ahlea • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 16.300 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2018, vzmetenje: drugo, velikost pnevmatike: 205/65 R 17,5, barva: zelen, Oprema: ABS, EBS (Elektronski zavorni sistem), - 5 osi: 1. os vodena s trenjem in dvižna; 2.-5. os hidravlično vodene - Raztegljivo: 6.200 mm (skupna dolžina: 12.800 mm - 19.000 mm) - SAF osi - Premične hidravlične dvojne rampe z nosilnimi nogami - Dvižni in spustni sistem - Bobnaste zavore - Vzmetenje: zračno-lift Pridržujemo si pravico do napak Gksdpfx Ahoymnmwjlja

Stanje: novo, največja dovoljena obremenitev: 34.104 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Further details here: Gedpfx Ahjv D Abgoleka

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 1.582 km, moč: 520 kW (707,00 KM), prva registracija: 01/2026, vrsta goriva: dizel, konfiguracija osi: 8x4, medosna razdalja: 5.300 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 500 l, zavore: intarder, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna dolžina: 10.700 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.120 mm, Leto izdelave: 2026, Oprema: AdBlue, Bluetooth, airbag, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, meglenke, navigacijski sistem, računalnik na krovu, servovolan, spojka prikolice, zapora diferenciala, = Further Options and Accessories = - Aluminum fuel tank - Differential lock - Low noise - Speed limiter - Air suspension - Air horn - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Towing pintle = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 15,480 kg Payload: 19,520 kg gross vehicle weight (GVW): 35,000 kg Functional Body manufacturer: WIESE MACHINE TRANSPORTER Loading platform height: 112 cm Maintenance, history, and condition APK (Technical Inspection): New roadworthiness certificate at delivery Technical condition: very good Visual condition: very good MAN TGS 35.520 H Ramp Truck/Machine Transporter/Flatbed EURO 6 L PACKAGE 520 HP DRIVE 8x2 HYDRODRIVE, REAR AXLE LIFT- AND STEERABLE WHEELBASE 530 CM AIR SUSPENSION DIFFERENTIAL LOCK TGS SLEEPER CAB WITH FULL EQUIPMENT: AIR CONDITIONING, NAVIGATION, REFRIGERATOR AUTOMATIC TRANSMISSION WITH RETARDER TRAILER COUPLING LED LIGHTING LOADING PLATFORM LENGTH 820 CM LOAD FLOOR HEIGHT ±112 CM EQUIPPED WITH 2 LARGE, ADJUSTABLE HYDRAULIC RAMPS 290 CM X 98 CM, SPLIT LARGE WINCH WITH REMOTE CONTROL 2 STABILIZING LEGS AT THE REAR TOOLBOXES Gjdpozata Nsfx Ahloka FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO WATCH VIDEOS OF OUR TRUCKS AND MACHINERY FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.300 kg, dovoljena osna obremenitev (os 2): 10.300 kg, dovoljena osna obremenitev (os 3): 10.300 kg, prva registracija: 08/2013, vzmetenje: zrak, velikost pnevmatike: 265/70R19.5, barva: modra, Leto izdelave: 2013, = Further options and accessories = - Air suspension = Notes = HRD STTM3N – Low loader – Extendable – SAF axle – Steering axle Year of manufacture: 7-8-2013 W09STTM3NCEN10148 Extendable Steering axle SAF axle = Further information = Axle configuration Tyre size: 265/70R19.5 Axle make: SAF Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 10,300 kg; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Rear axle 2: Twin tyres; Max. axle load: 10,300 kg; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Rear axle 3: Twin tyres; Max. axle load: 10,300 kg; Steering; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Weights Unladen weight: 10,800 kg Payload: 40,100 kg Gross vehicle weight: 50,900 kg Gjdpfx Ajy Rxrmohljka Condition Technical condition: good Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Coupling height loaded: 1,250 mm Loading Platform Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Stepped up to (LxW): 11,600 x 2,550 mm Steering Gkjdpfx Aey Iq Tdehlsa 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2012, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.300 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2012, Oprema: ABS, = Additional Options and Accessories = - Drum brakes = Remarks = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Length over axles: 900 cm Platform length: 900 cm Gooseneck length: 360 cm Maximum width: 290 cm (250+20+20) Extendable: × = Further Information = Axle configuration Tire size: 245/70 R17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tires; Tire tread left inside: 40%; Tire tread right inside: 25% Middle axle: Twin tires; Tire tread left inside: 50%; Tire tread right inside: 40% Rear axle: Twin tires; Tire tread left inside: 15%; Tire tread right inside: 25% Weights Unladen weight: 11,000 kg Payload: 37,000 kg Gross vehicle weight: 48,000 kg Godpjx U D Alofx Ahljka Identification Registration number: C340521 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.500 kg, največja dovoljena obremenitev: 52.500 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 980 mm, skupna dolžina: 13.550 mm, skupna širina: 3.000 mm, skupna višina: 3.565 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.360 mm, največja hitrost: 100 km/h, barva: sivo-črna, Leto izdelave: 2026, NÜKTE – CETRATEK 4-Axle Lowbed Semi-Trailer Gkodoy Awchjpfx Ahlja Powerful. Robust. Built for tough applications. The NÜKTE – CETRATEK 4-axle lowbed semi-trailer stands for maximum stability, high payload, and uncompromising everyday usability in professional heavy-duty transport. Featuring massive 4 x 10-tonne axle configuration on robust TRAX axles, a durable air suspension system, and a high-strength I-beam chassis constructed from S355J2+N quality steel, this lowbed trailer is the ideal solution for transporting construction machinery, agricultural equipment, wheel loaders, excavators, and heavy-duty vehicles. Even in its standard configuration, this semi-trailer impresses with well-thought-out, practice-oriented features: The first TRAX axle is configured as a lift axle, which significantly reduces tire wear during empty runs while improving maneuverability. The fourth TRAX axle is steered, allowing for precise maneuvering even on tight construction sites and company premises. A particular highlight is the hydraulically operated, laterally adjustable, one-piece loading ramps, enabling fast, safe, and convenient loading and unloading. Each ramp is rated for 20 tonnes of load per ramp, making them perfect for heavy machinery and vehicles. Maximum stability during loading is ensured by the standard hydraulic rear support system, which includes mechanical drop-down props. User-friendly operation is possible either via hydraulic remote control or directly at the vehicle, allowing all ramp and support functions to be operated safely and efficiently. In terms of quality, this trailer sets new standards: The entire chassis is shot-blasted, primed, and then coated twice with a high-quality 2-component paint system. We offer a 5-year warranty on the paintwork. The loading platform is fitted with 55 mm Dabema hardwood and protected in high-stress areas with reinforced checker plate. A high-quality Aspöck ADR-certified electrical system ensures maximum operational safety and meets the highest requirements for professional road use. With a loading platform length of 9,000 mm, width of 2,550 mm plus side extension of 250 + 250 mm, total length of 13,550 mm, loading height of 980 mm, and permissible gross weight of 64,000 kg, this lowbed trailer is perfectly suited for daily heavy-duty operations. The kingpin load is 24,000 kg, total axle load is 40,000 kg (4 × 10 t). Additional standard features include: - WABCO EBS 4S/2M - Air suspension - 16 + 1 tyres - 245/70 R 17.5 - Galvanised 12-tonne lashing rings - Toolboxes - Spare wheel - Aluminium covers on the gooseneck - Side extensions - Wooden decking on the platform Quality that convinces The high-grade finish with the modern 2-component paint system and the use of robust Dabema hardwood combined with additional reinforced checker plate ensure an exceptionally long service life—even under the harshest operating conditions on construction sites and in heavy-duty applications. CETRATEK—Technology you can rely on. Technical specifications and prices subject to change. All images are examples and may show special equipment or optional features.

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.500 kg, dovoljena osna obremenitev (os 2): 12.500 kg, dovoljena osna obremenitev (os 3): 12.500 kg, prva registracija: 07/2000, skupna dolžina: 15.410 mm, skupna širina: 2.540 mm, skupna višina: 890 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, stanje pnevmatik: 50 odstotek, medosna razdalja: 12.460 mm, barva: drugo, Leto izdelave: 2000, Oprema: ABS, dvižna zadnja plošča, = Druge možnosti in dodatki = - 4 OSI - Zadnja loputa - Hidravlika - Zračno vzmetenje - Krmiljena os = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 245/70 R17.5 Znamka osi: SAF Zavore: bobnaste zavore Zadnja os 1: dvojna guma; Največja osna obremenitev: 12.500 kg; Profil pnevmatik: 50% Zadnja os 2: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 60% Zadnja os 3: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 70% Zadnja os 4: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 30% Teže Lastna teža: 12.800 kg Nosilnost: 68.450 kg Skupna dovoljena masa: 81.250 kg Stanje Splošno stanje: povprečno Gjdpfxezqmbao Ahloka Tehnično stanje: povprečno Vizualno stanje: dobro Identifikacija Registrska številka: ZZ-98-52

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Further options and accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = TECHNICAL SPECIFICATIONS MASSES & DIMENSIONS - Gross Vehicle Weight (kg): 70,000 - Loading Platform Length (mm): 9,000 - Weight of Axle Group (kg): 48,000 - Total Length (mm): 13,550 - Kingpin Capacity (kg): 22,000 - Total Width (mm): 2,550 - Curb Weight (kg): 13,000 - Loading Platform Height (mm): 920 - Pay Load (kg): 57,000 - Height of 5th Wheel (mm): 1,310 CONSTRUCTION - Base chassis - Heavy-duty, high-durability BOX-type chassis, fully welded, S355 steel - Outer frame profile: UPE 240 - Welding (Chassis): Automatic submerged arc process - Welding (Superstructure): Robotic welding - Axle (Brand/Type): Özkoç Trax or Osman Koç, Turkish make - Drum brakes: Four axles, 12-ton each - Axle lifting: 1st axle automatic, 4th axle manual lifting - Suspension: Air suspension - Steering axles: -- - King pin (Type): Single-position, 1x coupling pin 2” - Tyres: 16+1 units, 245/70 R17.5 - Rims: 16+1 units, 6.75 x 17.5 steel - Landing gear: Mechanically operated from one side, two-speed - Brake system: Wabco EBS (4S/3M) with RSS, EC-compliant, with ADR adaptation - Brake chambers: 2 axles with 4 emergency brake chambers, 2 axles with 4 service brake chambers Electrical System - 24V, 2x7 + 1x15 pin sockets, SAE standard, SABA brand, ADR-compliant - 2 x rear stop lights, 4 x side LED lights - 2 x white LED lights, 2 x front LED lights - 2 x registration plate lights, 2 x rotating lights Floor - Above wheels and platform edges covered with checker plate and hardwood - Central surface covered with smooth sheet steel Rear Loading Ramps - Hydraulic rear ramps with electric pump (cable-controlled) - Remote control push-button - Foldable rear ramps, length: 2500 mm + 1500 mm, width: 900 mm - Rear ramps with internal and external hydraulic sliding - Short steel ramps behind the neck Coating Process - Sandblasted, chemically cleaned, HYZINC-coated, epoxy primed, finished with two coats of acrylic paint TECHNICAL SPECIFICATION ACCESSORIES - 2 x 8 heavy-duty lashing rings (mushroom type), mounted to outer frame - 4 x certified spray mud flaps - 1 x plastic water tank - 2 x wheel chocks with holders - 2 x 8 galvanized side extension brackets (250 mm + 250 mm) - 2 x side guards, aluminium - 1 x toolbox - 1 x spare wheel carrier with one tire (on gooseneck) - 2 x manual support legs at the rear - 2 x reflective tapes and reflector plates, rear and side - 2 x side extension reflectors - Steel front panel (height: 400 mm) - Aluminium side panels on gooseneck section (height: 400 mm) - 1 plate mounting point on rear ramps or bumper = Further information = Gedpfx Aey E Nxaohljka Unladen weight: 13,000 kg CE marking: yes