Müller-Mitteltal Priklopnik Sedeža Z Delovno Ploščadjo nakup rabljenega (28.161)

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (therefore B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electric / Lighting: * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated by reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Landing gear at the front * External folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted to the left and right sides * Lateral underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall Dsdpfov D Tbkox Al Hscg * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable, locking dimension retracted to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with an absolute external width of 3,000 mm. ----Cargo Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing force every 480 mm * Option to fit 3 t drop-in lashing rings every 600 mm - 5 x 3 t UVV lashing rings installed per side - * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front and rear cross member for 1.2 t lashing points ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Storage compartment from the rear, recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from week 22/2026

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 06/1998, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, 2-osna BlomenRöhr platforma SDAH 8,5T Leto izdelave: 06.1998 Proizvajalec: BlomenRöhr Listnato vzmetenje Pnevmatike: 215/75 R17 Dolžina: 6240 mm / Višina: 2360 mm Dodpfx Asv Ridhsl Hscg Brez tehničnega pregleda (TÜV) Dodatna posebna oprema, podatki ali slike na zahtevo! Podatki brez garancije/možne napake! Podatki na internetu so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne odgovarja za napake, tipkarske napake ali napake pri prenosu podatkov. Pridržujemo si pravico do sprememb. Stalni odkup in prodaja ter prevzem v račun in najem komunalne tehnike / vozil za zbiranje in čiščenje kanalov, storitev odvoza tekočih in nevarnih odpadkov.

Stanje: rabljeno, skupna masa: 2.000 kg, prva registracija: 08/1995, Prikolica z ogrodjem za reklamne ponjave ali za prevoz stvari Dcsdpfx Ajynvdmjl Heg Lokacija: Im Erlenkamp 15

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available immediately | Reference number for inquiries: 11611 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Excavator bucket rest made of hardwood, bolted to the front wall * Floor height unladen 930 mm / laden 870 mm * One-piece ramps with hot-dip galvanized grid surface, slip-resistant design, retractable down to approx. 20 mm. Secured by retaining bar and diagonal brace * Ramp lifter with upright, adjustable springs for easy one-man operation * 4 UVV drop lashings (LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN at a minimum spacing of 480 mm. Installation of drop lashings LC 3000 daN at approx. 600 mm spacing possible), closely spaced cross-stiffeners, high-ribbed front and rear closure with rear loading ramp, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN retractable in the existing hole grid in the outer frame, additional * Additional lashing options via bore holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmembers * Toolbox in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable, 50 mm eye possible on request * 1 removable LED warning light at the rear * ---- * Leasing, hire purchase, financing, trade-in possible * Example: 510 euros for 60 months’ term, no down payment, no final installment * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Dcjdpfx Aeyndh Hol Hjg Outside of business hours, viewings possible by appointment. We speak German, English, Polish, and French Leasing, financing, trade-in possible

Stanje: rabljeno, skupna masa: 3.500 kg, konfiguracija osi: 1 os, prva registracija: 09/1996, Leto izdelave: 1996, Oprema: žerjav, * Technische Daten: * Name: DENKA LIFT MK 25 *Clemens AB 25meter Arbeitshöhe: 25,00 m / 200 kg Dedpfx Aexzw Hzsl Hecg Korblast: 200 kg / 2 Personen Drehbereich: 360° endlos Reichweite: 11,40 m / 80 kg Reichweite: 9,00 m / 200 kg Eigengewicht: 2.450 kg Arbeitskorb: 0,70 x 1,40 m Durchfahrtsbreite: 1,69 m Durchfahrtshöhe: 2,11 m Gesamtlänge: 9,07 m Gesamtlänge minimal: 8,30 m * Abstütz-Quadrat: 3,90 x 3,90 m * Ausstattung - 24 V Batterieantrieb mit eingebautem Automatik-Ladegerät - hydraulische Schnellabstützung - zweites Bedienpult am Unterwagen - 230 V Steckdose und Werkzeugablage im Korb - Winkelarm mit drehbarem Korb - manueller Notbetrieb - Sicherheitsüberwachung für Stützbeine und Überlast - stufenlose Proportionalsteuerung * Arbeitszeit von Mo bis Fr 07:30-12:00 13:00-18:00, Samstag 07:30-17:00. * E-Mail: * Tel/ Whatsapp/ Viber: Alexandar Ilic * Tel/ Whatsapp/ Viber English: Mladen Ilic

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Dcodeq Dyvyjpfx Al Hsg * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: Dedpfx Aoq Euaksl Hocg * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2018, dolžina tovornega prostora: 6.060 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 300 mm, Errors and prior sale excepted! Internal number: 1448. EQUIPMENT * Flatbed trailer * 3 axles * Jockey wheel * AL-KO coupling * Side planks all around ... and much more. ----The vehicle is offered in unrefurbished condition! Dedevwh U Sjpfx Al Hjcg Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to take your vehicle in trade-in. Financing / leasing possible even without down payment! Do you have further questions? We are happy to advise you!

Stanje: rabljeno, največja dovoljena obremenitev: 4.930 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 1.990 mm, skupna širina: 2.545 mm, skupna višina: 2.850 mm, Errors and prior sale excepted! Internal number: 1457. 1083677 --- Please refer to the photos for equipment and condition. --- The vehicle is in unprepared (as-is) condition! Dodowtvvnepfx Al Hjcg Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to accept your vehicle as a trade-in. Financing / leasing available with no down payment required! Do you have any further questions? We are happy to advise you!

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection Dcodpetplwisfx Al Heg * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V Djdpfx Asq Dyv Ijl Hecg * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Availability from week 19/2026

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs, 110 mm wide, with tandem equalizer unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal front wall * Side walls made of trapezoidal profiled steel sheet, foldable with board spring lifter * Steel rear wall, insertable between the ramps (holder for unused panel inside the front wall) * Bolted rear stanchions * Outer frame perforated and angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Possible installation of 3 t recessed lashing rings every 600 mm * In each corner front and rear: 1 x 10 t lashing ring; various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail centrally along longitudinal axis for lashing up to LC 3,000 daN * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Side boards painted RAL 9010 pure white * Side wall painting in a RAL color available at extra charge * Axles, springs, air tank, flange towing eye, and landing gear painted in black * New vehicle with full manufacturer warranty Dcodpfxel Th Hwj Al Hjg * Errors and prior sale excepted * Available approx. from calendar week 21/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector Dcsdpepk D Dqsfx Al Heg ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 7.200 kg, skupna masa: 9.000 kg, konfiguracija osi: 1 os, prva registracija: 03/2008, - Platform for ballast weights - 40 mm towing eye - 9 lashing rings - Drum brakes - Leaf suspension Dsdpfx Ajwfku Asl Hecg - Support legs - BPW axles All information subject to change / Prior sale reserved.

Stanje: rabljeno, največja dovoljena obremenitev: 15.150 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/1994, ? Platforma za balastne uteži ? 50 mm vlečna očesca ? 4 x pritrdilna očesa ? Bobnasta zavora ? Listnato vzmetenje Dsdpfx Aljw Sqils Hscg ? Podporna stojala ? SAF osi Vsi podatki brez garancije / Vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 12.100 kg, skupna masa: 16.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2011, dolžina tovornega prostora: 7.400 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, * ABS * Rotating beacon, orange * Duomatic air coupling * 5-chamber rear lights * Front landing gear * BPW ECO axles ----Body: Open platform (loading height approx. 950 mm), hardwood floor, rear extendable by 1,685 mm, 4 pairs of extendable container locks (twist locks), stainless steel toolboxes. Dcjdpfx Aevy Nw Tsl Hsg Sale exclusively to business customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see Legal Notice) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.

Stanje: novo, največja dovoljena obremenitev: 11.400 kg, skupna masa: 15.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Metal-Fach T009 Bale Trailer 3-Axle Platform Trailer Flatbed Trailer New Vehicle Year of Manufacture: 2026 Overall dimensions: 11990mm + 800mm x 2480mm x 2900mm Internal dimensions: 9300mm + 800mm x 2380mm x 1875mm Gross weight: 15,000 kg Unladen weight: 3,560 kg Payload: 11,440 kg Loading height: 1,160 mm Tyres: 500/50-17 Extendable loading platform Wide tyres Air brake system Load-dependent brake force regulator (ALB) Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading grids Y-drawbar 40 km/h road approval possible Mudguards Custom paint available !!! ATTENTION – PLEASE READ !!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend inspection and verification to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are for illustration purposes and may show optional accessories at additional cost. The internal dimensions stated are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE DEALS AND SURCHARGE POSSIBLE!!! Dcodpfxotw N D So Al Hsg Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 9.000 kg, skupna masa: 11.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 9.080 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Metal-Fach T014/2 Bale Trailer 2-axle Platform Trailer Flatbed Trailer New vehicle Year of manufacture: 2026 Overall dimensions: 9089mm + 800mm x 2520mm x 2880mm Internal dimensions: 6409mm + 800mm x 2380mm Loading height: 1150mm Gross weight: 11,600kg Empty weight: 2,600kg Payload: 9,000kg Tyres: 400/60-15.5 Extendable loading platform Wide tyres Air-braked ALB valve Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading gates Y-drawbar 40km/h road approval possible Mudguards Custom paint possible IMPORTANT!!!! PLEASE READ!!!! We expressly reserve the right of prior sale as this item is also advertised on other platforms. We strongly recommend an inspection and review to avoid any misunderstandings regarding the condition or suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Dedpfx Aljhlr Rds Hjcg Images are similar and may show accessories subject to an extra charge. All internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 2.110 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.550 mm, višina nakladalnega prostora: 200 mm, B27300/150 MACHINE TRANSPORTER TECHNICAL DATA * Trailer type: B27300/150 * Gross vehicle weight: 2,700 kg * Payload: 2,075 kg * Internal dimensions: L: 305 cm, W: 155 cm, H: 20 cm * Loading height: approx. 54 cm * Floor: multiplex wooden floor * Integrated lashing points recessed in the loading floor * Side walls: steel * Frame: welded steel, hot-dip galvanized by immersion * Electrics: 13-pin, 12V * Tyres: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axles * Standard jockey wheel * Walkable steel mudguards * Shovel holder * Rear support stands * Loading ramps – 200 cm plus vehicle registration document/COC certificate €39.00 All prices include VAT. Images may not correspond to the standard equipment. Technical changes (e.g. tyre sizes) reserved. Delivery: Delivery by forwarding agent possible, €1.50 per transport kilometre one-way throughout Germany (from Seesen to the destination), at least €270 plus VAT. Visit us also at Here you can also order your desired trailer and accessories upon request: BLYSS Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel.: Dsdjthlrhjpfx Al Hocg FINANCING OR LEASING POSSIBLE* Vehicle number (for customer inquiries) Images may not correspond to standard equipment. Technical changes (e.g. tyre sizes) reserved.

Stanje: novo, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.750 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 2.300 mm, Trade Fair Trailer Event Promotion HBA375 Please use 0566 for inquiries. * Permissible total weight: 1500 kg * Internal dimensions: 375x220x230 cm * Chassis: single-axle, high-loader, steel/galvanized with 4 retractable support legs * 10-inch tires * Automatic reverse mechanism and jockey wheel Djdpoxw Dt Tofx Al Hecg * 13-pin connector plug * Superstructure: white UV-resistant polyester sandwich panels, white painted profile strips * Walls and ceiling approx. 25 mm thick * Full-depth side flap on the right (in direction of travel) * Folding aluminum staircase with railings/handrails on both sides, including flag holder slots Plus €39 gross for vehicle documents/COC. We will send these by registered mail or hand them over in person upon receipt of (down) payment. Please contact us before visiting, as this trailer may already be sold despite our large on-site stock. By phone, you can find out if your desired trailer is immediately available – we are happy to also order new units to your specifications (dimensions, weight, equipment, etc.). Due to the large number of trailers in stock, mistakes can occasionally occur – please bear with us. Information regarding specifications and prices may contain errors.

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS braking system * Emergency release device for spring-loaded cylinders Dedpjrwc R Rjfx Al Hocg * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension of 250 mm for a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck cab via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrics ----General attachments: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Pre-equipment in front of the bulkhead for subsequent installation of container locks * Bolted 400 mm bulkhead made of smooth sheet * Rear stakes bolted * Drop sides with spring-assisted lifting mechanism ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various drill holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail along the centre longitudinal axis, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (collapsible to 20 mm spacing) * Hydraulic flow divider in the trailer (when hydraulic pump output in truck exceeds 40 l/min, max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical rear supports and ramps hot-dip galvanized * Axles, springs, air tanks, landing gear and flange eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls available painted in any RAL colour for an additional charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from approx. week 16/2026

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty Dodpfxjl Tlhre Al Hjcg * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * LED beacon (removable) on the rear * 24 V 15-pin, plus additional 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at the front * Straight steel rear mudflaps each with spray suppression (splash suppression) * Side underrun protection * Extended drop member by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 integrated lockable storage compartments incl. lids * Chassis made of high-strength fine-grain steel * Floor over turntable platform: 50 mm, low-loader platform: 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included), each with 2 t lashing capability * Load securing package includes: 2 lashing eyes 6.4 t front left and right on main turntable frame, side front and rear each 1 pair 13.4 t lashing rings on outer frame, 4 pairs per side 10 t swiveling and lowerable lashing rings loadable from all directions recessed in outer frame, 2 pairs 6.4 t lashing rings on each side in the excavator arm rest, 8 pairs galvanized folding outriggers for 3 meter total width (not at the rear bevel) * Widening planks stowed in a compartment on the left side Dcjdorczm Djpfx Al Hog * Excavator arm rest above the rear axle to end of approach ramp approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding pipe from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach ramp) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air reservoir and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and interim sale reserved * Available from CW 21 / 2026

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm via offset plate * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood flooring, clamped version * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted front bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profile steel sheet, foldable, with folding stanchion in the middle * Steel rear wall, insertable between the ramps; stowage fixture in front of the bulkhead when not in use * Bolted rear stakes * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t drop lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV lashing ring, 2 x 8 t retractable UVV lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options * One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized * ---Axles, air tanks, flanged towing eye, and support winch painted in black--- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf Dodpsmi Tmasfx Al Hocg

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear front * Rear external folding supports * Plastic toolbox front right, outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: Dcedpol Th Nrofx Al Hsg * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood flooring * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Rear wall made of steel, can be slid in between ramp mounts, stored inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear approach incline approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black * Drop-sides painted in RAL2011 deep orange * Painting of the side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf