Faymonville Stbz-2Waa 10.6 Meter Extandable! nakup rabljenega (2.743)

Stanje: rabljeno, največja dovoljena obremenitev: 25.600 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izdelki iz serijske opreme. Celotna oprema na zahtevo. Priznati del Priznati del Light, dolžina cca 4.080 mm Priznati del, hidravlično dvigljiv/spustljiv in odklonljiv Za SZM: 4 x 2 in 6 x 2 Nizka platforma Nizka platforma, zasnovana kot teleskopski most za bager z iztegom spredaj in mehanskim zaklepom. Dolžina x širina cca 6.350 mm x 1.300 mm Podvozek zadaj Podvozek zadaj v kratki izvedbi z zaprtim zunanjim okvirjem in jekleno ploščo z bagerjem, ki je v zadnji polovici zaprta za namestitev rezervoarjev za zrak Osi in vzmetenje BPW osi in vzmetenje, vse osi hidravlično-mehansko prisilno usmerjene Tehnologija osne obremenitve: 12.000 kg Zračno vzmetenje z ventilom za dvig in spuščanje Orodje za os Pnevmatike 235/75 R 17.5 3PMSF, dvojne pnevmatike Indeks obremenitve 143/141J (144/144F) Zavorna naprava Zavorna naprava znamke WABCO EBS-E v skladu z direktivami EU Brez povezovalnega kabla za vlečno enoto Gjdozlmkwspfx Af Rsbt Barvanje 6-K končna obdelava Celotna jeklena konstrukcija, peskana po varjenju 1 sloj temeljne barve na cinkovi bazi, 1 sloj prajmerja za oprijem Končni premaz z 2 plastmi dvokomponentne barve (akril), enobarvna v RAL 3002 karminsko rdeči barvi, nato pa zapiranje votlin s posebnim voskom. Platišča v srebrni barvi Dodatna oprema Jeklena sprednja stena, vstavljiva, cca 400 mm visoka Priključna letev za napajalne kable do SZM, nameščena na višini zunanjega profila okvirja Okrogla NATO vtičnica na priključni letev spredaj (Maeler & Kaege VG 96 917) 3 kW elektrohidravlična enota za upravljanje hidravličnih funkcij, razen hidravličnih vitlov 3 pari vtičnih pritrdilnih obročev na priznatem delu (LC 5.000 daN) 2 para varjenih pritrdilnih obročev LBS 3 (LC 6.000 daN), spredaj cca 600 mm za sprednjo steno in zadaj na priznatem delu 2 para varjenih pritrdilnih obročev LBS 3 (LC 6.000 daN), na zunanjem okvirju priznačnega dela Na priznačnem delu 2 para vtičnih aluminijastih stranskih desk, cca 400 mm visoke, eloksirana izvedba Na priznačnem delu ena vtična aluminijasta zadnja stena, cca 400 mm visoka, eloksirana izvedba Nad priznačnim delom cca 12 mm debel premaz Delignit 2 palčni kraljevi zatič Hidravlična prečka za oporo priznačnega dela na SZM ali priklopniku Zračna priključnica z zračno pištolo na priznačnem delu Možnost dostopa na priznačni del 2 para vtičnih žepov za nosilce na priznačnem delu, za vtične nosilce cca 100 x 100 mm Na notranji cevi zunaj, navojne luknje za pritrditev vijačnih pritrdilnih obročev M24 (LC 8.000 daN) 2 para vijačnih pritrdilnih obročev M24 (LC 8.000 daN), vključno Na zgornjem pasu zunaj cca vsakih 1.200 mm možnost obešanja ø26 mm za vijačne obroče (LC 8.000 daN) 10 parov pritrdilnih obročev na zunanjem nosilcu RBS-5 (LC 10.000 daN), pod in med podaljški Zložljivi, iztegljivi podaljški, blokirni na cca 2.550/2.750/3.000 mm, vklj. jeklene podloge v deljeni izvedbi, z leseno oblogo Poševnost spredaj na podvošku, cca 350 mm x 12°, vključno z integriranimi nosilnimi letevami spredaj in zadaj za dodatne rampe 2 para pritrdilnih obročev z zadrževalno vzmetjo na prehodu od nizke platforme do bagerja (LC 10.000 daN) 3 pari vtičnih pritrdilnih obročev v zunanjem okvirju podvoška, zložljivi navzven: spredaj in zadaj po 1 par (LC 5.000 daN), v sredini 1 par (LC 10.000 daN) 2 para pritrdilnih obročev LBS-3 (LC 6.000 daN) varjeni nad

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2009, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, Leto izdelave: 2009, Dodatne informacije: Znamka: FAYMONVILLE Model: Telemax Zgradba: nizkopodni priklopnik (platforma D=13.330-17.530 mm, raztegljiva / V=1.400 mm) Gbsdpfx Afjzhvqls Rot Leto: 01.2008 Vzmetenje: zračno Zavore: bobnaste Dimenzije: D/Š: 13.800 mm / 2.550 mm Mase: polna/prazna: 59.000 kg / 11.310 kg VSE OSI KRMILJENE Modelno leto: 2007 Tip vzmetenja: zračno Zavore: bobnaste Krmiljenje: krmiljeno = Več informacij = Vzmetenje: zračno vzmetenje Srednja os: krmiljena Zadnja os: krmiljena Lastna masa: 11.310 kg Nosilnost: 47.690 kg Skupna masa: 59.000 kg

Stanje: rabljeno, konfiguracija osi: > 3 osi, Leto izdelave: 2009, Naprodaj je Faymonville MultiMAX 4-osni pol-prikolica nizkoploščad / globoka prikolica iz leta 2009 z dovoljeno skupno maso 71.000 kg. Prikolica ima 4 osi in hidravlične nakladalne rampe. Izjemno primerna je za prevoz gradbenih strojev, delovnih strojev, nakladalnikov, bagrov, goseničarjev in težkih gospodarskih vozil. Proizvajalec: Faymonville Model / Tip: MultiMAX / TL STZ-4AU Vrsta vozila: pol-nizkoploščad / nizkoploščadna polprikolica Prva registracija: 26.02.2009 Št. šasije / VIN: YAFTL409100009798 Število osi: 4 Dovoljena skupna masa: 71.000 kg Lastna masa po homologaciji: 16.800 kg Nosilnost (preračunano): pribl. 54.200 kg Obremenitev na os: 11.500 kg Gbodozhu A Hjpfx Af Rjt Obremenitev na zatič (pivot): 25.000 kg Dolžina vozila po homologaciji: 17,76 m Širina po homologaciji: 2,76 m Barva: bela / bež 4-osna pol-nizkoploščad Hidravlične nakladalne rampe zadaj Razširljiva nakladalna površina / stranske razširitve Globokonosna izvedba za prevoz strojev Podporne noge spredaj Stranska orodjarna / zaboj za shranjevanje Rezervno kolo na labodjem vratu Privezne točke vzdolž nakladalne površine Robusten jeklen okvir Labodji vrat izvedba Osvetlitev in opozorilne table zadaj Primerna za prevoz težkega tovora in gradbenih strojev Krmarjena os = Dodatne informacije = Lastna masa: 16.800 kg Nosilnost: 54.200 kg Skupna dovoljena masa: 71.000 kg

Stanje: novo, največja dovoljena obremenitev: 46.800 kg, skupna masa: 58.000 kg, konfiguracija osi: > 3 osi, Oprema: ABS, Na naši spletni strani najdete naš celoten nabor vozil, ki so na voljo takoj ali v kratkem roku. Izbor iz opreme: Celotna oprema na zahtevo. "Labodje vrat": * "Labodje vrat" s poševnimi robovi spredaj, približno 45° in z zadnjo poševnostjo približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * Prevleka iz trdega lesa, debeline približno 30 mm Nosilna plošča, raztegljiva različica: * z zadnjo poševnostjo približno 1.000 mm x 8° * 5 parov pritrdilnih obročev, z zunanjim mehanizmom za zlaganje (nosilnost 5.000 daN) * 3 pari pritrdilnih obročev, z zunanjim mehanizmom za zlaganje (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščen vodoravno spredaj na nosilni plošči (nosilnost 10.000 daN) * Vrezanine v zunanjem okvirju nosilne plošči za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * Prevleka iz trdega lesa, debeline približno 48 mm, nad osmi protizdrsna prevleka. Osi: * Osi in vzmetenje BPW * Prva os je fiksna, vse ostale osi pa so hidravlično-mehansko sinhronizirane * Tehnična obremenitev osi: 12.000 kg na os * Zračno vzmetenje z ventilom za dvigovanje in spuščanje * Orodje za osi * Pnevmatike * 245/70 R 17.5 3PMSF * Indeks obremenitve (146/146 F) * TPMS: Sistem za nadzor tlaka v pnevmatikah, v skladu s standardom ECE R 141 Podporne noge * Podporne noge JOST (mehanske) z 2-stopenjsko prestavo za približno 24 t dvigalne nosilnosti (približno 50 t preizkusne nosilnosti) Zavorna naprava * v skladu s predpisi EU z EBS-E (4S3M) Barvanje * Celotna jeklena konstrukcija, avtomatsko obdelana s peščanjem po varjenju * Drugo peskanje s korundom za optimalno oprijemljivost prevlečnega sistema * HRM-metalizacija celotnega šasije vozila s pomočjo ZINACOR 850 (85 % cink/15 % aluminij) za zagotavljanje najboljše korozijske zaščite * Končno barvanje z 2 plastmi 2K lakom * enobarvno, v barvi RAL 3002 Karminrot, v skladu s sistemom RAL 841GL * Platišča v srebrnosivi barvi. Zadnji del metaliziran in pobarvan v barvi RAL 9010 (čista bela) * Metalizirano barvanje ni mogoče Godpfx Afozk S Dme Rjbt * Barvna prevleka preizkušena s testom solne megale v skladu s standardom ISO 9227-NSS * Zapiranje votlin s specialnim voskom Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * Kakovost jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu s predpisi EU Osvetlitev * 24 Volt ASPÖCK-NORDIK (ASS3) * Vse LED stranske gabaritne luči utripajo skupaj s smerokazom * ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S & 15 polna * Priključek v skladu z ISO. 24N ISO-1185 24S ISO-3731 15 polna ISO-12098 Vključno z naslednjo dodatno opremo: * 2-palčni kraljevi priklop * Pocinkana jeklena sprednja stena, približno 400 mm visoka * Elektro-hidravlična agregat (± 45 kg) * Pomik sprednje in zadnje osi s kabelskim daljinskim upravljanjem preko tipk, z nadzorom ene osi (brez vgradnje v centralno mazalno enoto) * 1 par potopljenih pritrdilnih obročev vzdolž centralnega nosilca zadaj v poševnem delu (nosilnost 10.000 daN) (± 3 kg) * Na "labodjem vratu" aluminijaste bočne stene in zadnja stena, vstavljivi, približno 2.440 x 400 mm (D x V) * Zadnje pocinkane vstavne ograje je mogoče odstraniti. (dolžina nadgradnje približno 2.560 mm) (± 46 kg) * Orodje, galvanizirano, integrirano v poševni del "labodjega vrata" (± 47 kg) * 3 pari WADER žeepov za kontejnerje na nosilni plošči za 20' (30?) ali 40'? kontejner (± 30 kg) * 6 parov žeepov za vstavne ograje, približno 100 x 50 mm, v zunanjem okvi

Stanje: rabljeno, največja dovoljena obremenitev: 25.630 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2024, naslednji pregled (TÜV): 11/2026, Oprema: ABS,

Stanje: novo, največja dovoljena obremenitev: 44.000 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Gbodpfx Aev D Abtef Ret

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 Gbjdjg Sk Tropfx Af Rst 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: novo, največja dovoljena obremenitev: 36.461 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.480 mm, skupna višina: 860 mm, Leto izdelave: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings at the front central beam (LC 10,000 daN). C40/4 grating floor (point load 2.3 t on an area of 20 x 20 cm), over the axles checker plate covering. Two-part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections, hydraulic lifting system. Max load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length of 16,500 mm when in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in line with ECE R 141. Data transmission to the towing vehicle is via the standardised EBS interface according to ISO 11992. The towing vehicle must be able to receive and display this data for correct indication. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lift and lower valve. Axle tool kit. Brake System: WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to tractor unit. Electrical System: Electrical system according to EU regulations, LED lighting 24 V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15 pin. Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Gjdpsw Dl Hwefx Af Rebt Steel Construction: Steel construction made of high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Curtainsider Structure: Curtainsider body, ??? 3,960 mm ??? - Galvanised front wall with a tensioning mechanism for sliding curtains. - "EDSCHA" roof, forward sliding on ALU roof beam profiles (bolted to front and rear wall). - 3 pairs of sliding stanchions in the loading platform. - The body is hydraulically extendable at the rear by approx. 750 mm left and right. - Sliding roof with upward folding portal beam. - Sliding curtain with 700 mm length reserve and tie-down straps approx. every 600 mm. Height upper edge of body approx. 3,960 mm (laden). - Driving with an open sliding roof is not permitted and will cause damage to the curtain. Paintwork: Entire steel structure is shot-blasted automatically after welding using a wheel blast system. Second blasting with corundum for optimal coating system adhesion. HRM-metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection. Final painting with two layers of 2K topcoat, single colour, shade selectable according to RAL 841GL. Rear section metalized and painted RAL 9010 (pure white). No metallic paint.

Stanje: novo, največja dovoljena obremenitev: 34.104 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Further details here: Gsdsv D Abgepfx Af Rjbt

Stanje: novo, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Gbsdpfxoizu Nwj Af Rst Speed: 80 km/h Gross weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Loaded coupling height: 1,200 mm Rear swing radius: 2,300 mm Loading platform length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Chassis length: 2,600 mm Chassis rear loading height at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Overall width: 2,540 mm Gross weight depends on fifth wheel load. Low-bed: Low-bed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking device. Supply lines are routed safely within the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of folding external lashing rings (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat lashing rings in trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm plug-in uprights in outer frame Gooseneck: Gooseneck in SNT design for maximizing loading area length, length approx. 3,785 mm. Gooseneck hydraulically lift/lower and detachable. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 PENDLE AXLE: "PENDLE-AXLE", all axles hydro-mechanically forced steered. Burst protection valve on axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position. Axles finished in 2 layers of single-color 2K paint (FAY-Gray-34-0260). Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools. Brake system: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor. Electrical system: Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S, and 15-pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Steel construction: Steel structure made of high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single-color in RAL shades of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Tyres: 245/70 R 17.5 3PMSF tyres, brand at manufacturer’s discretion. Load index (146/146F) Prepared to accommodate bolted container positioning devices for 1x 20' or 1x 40' container on the outer beams. Without container locks. - 2” king pin - Galvanized steel headboard, approx. 400 mm high - One spare wheel with holder in front of the headboard - Two wheel chocks with holder on the headboard - At the galvanized front connection panel, yellow-red air couplings - Steering from front and rear via remote cable control with push buttons, including single-track axle control (without installation on the tractor unit) Hydraulic connections from gooseneck to low-bed

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Godpfsg Sk Tvsx Af Rebt Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Gbsdpsg Sk T Dsfx Af Ret Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Maximum speed: 80 km/h (legal) Gross vehicle weight: 49,500 kg 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Turning radius king pin to rear approx.: 2,100 mm Coupling height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Load height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific legislation: Technical Description Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading platform: Loading platform approx. 9,600 mm in length with rear bevel approx. 900 mm x 6°. Loading area after gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps individually hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle according to technical datasheet: C470319 Maximum gradient angle with lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Gbedpfx Aoizu Ntsf Rot Air suspension with lifting and lowering valve. Axle tools. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion Load index 143/141J (144/144F) Brake System: WABCO EBS-E brake system according to EU regulations. No connecting cable to the tractor unit included. Lighting System: 24V lighting system in "ASPÖCK-NORDIK full LED" version according to EU regulations. (ASS 3) Metallisation: Complete HRM metallisation (High Resistance Metallisation) Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). 6-Coat Paint Treatment: Entire steel structure shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Topcoat consisting of 2 layers of 2K paint (acrylic) in a single RAL shade of choice, followed by cavity sealing with special wax. Rims in silver. Multi-colour and special coatings available at extra charge. Steel Construction: High-strength fine-grain steel structure. Steel grades: S355J2+N/S355MC (min. yield strength 355MPa) S690QL/S700MC (min. yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG-welding process to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Front bulkhead made of steel, detachable, approx. 400 mm high Connector strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. Anderson socket at the front connection strip. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or

Stanje: novo, največja dovoljena obremenitev: 40.017 kg, skupna masa: 50.960 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, Technical Specification Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading platform: 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of flat lashing rings at the front end of the platform (LC 10,000 daN). Approx. 48 mm hardwood flooring, over the axle areas with checker plate covering. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load). Tyres: 205/65 R17.5 tyres, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit occurs via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transferring and displaying this data. Axles: BPW axles, two rigid, two self-steering, air-suspended, drum brakes, with lift/lower function. The self-steering axles have an electromagnetic reverse lockout, activated via reverse gear or manually. Axle tool included. Brake System: WABCO braking system in accordance with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor. Electrical System: Electrical system per EU regulations, LED lighting, 24V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets. Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: High-strength fine-grained steel construction. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: Entire steel construction automatically shot-blasted after welding. Additional blasting with corundum for optimal coating adhesion. HRM-metallisation of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection. Final coating with 2 layers of 2K top coat, single-colour to customer choice according to RAL 841GL. Rear section metallised and painted in RAL 9010 (pure white). Metallic paints not possible. Paint finish tested with salt spray test according to ISO 9227-NSS. Cavities sealed with special wax. Options Included: 2" king pin Galvanised steel front wall. Yellow-red air couplings on galvanised front connection rail. 2 wheel chocks with holder at the front wall. Rear gooseneck ramp mounts for ALU loading ramps. Further options available. Godpfx Afsw Dl Hqs Rsbt

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2012, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.300 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2012, Oprema: ABS, = Additional Options and Accessories = - Drum brakes = Remarks = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Gbjdpfx Asx U D Alof Rot Length over axles: 900 cm Platform length: 900 cm Gooseneck length: 360 cm Maximum width: 290 cm (250+20+20) Extendable: × = Further Information = Axle configuration Tire size: 245/70 R17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tires; Tire tread left inside: 40%; Tire tread right inside: 25% Middle axle: Twin tires; Tire tread left inside: 50%; Tire tread right inside: 40% Rear axle: Twin tires; Tire tread left inside: 15%; Tire tread right inside: 25% Weights Unladen weight: 11,000 kg Payload: 37,000 kg Gross vehicle weight: 48,000 kg Identification Registration number: C340521 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: novo, največja dovoljena obremenitev: 45.115 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Dodatna vozila na voljo Izvleček iz opreme. Popoln seznam opreme na zahtevo. Tovorna površina: - Tovorna površina z okoli 30 mm debelim trdim lesom - 8 parov zložljivih pritrdilnih obročev (nosilnost LC 10.000 daN) Podporne noge: - JOST mehanske podporne noge z dvojnim menjalnikom, dvižna zmogljivost ca. 24 t (preskusna obremenitev ca. 50 t) Pnevmatike: - 385/65 R 22.5 - TPMS sistem za nadzor tlaka v pnevmatikah po standardu ECE R 141. - Prenos podatkov k tovornemu vozilu poteka prek standardiziranega EBS vmesnika (ISO 11992). - Vozilo mora podpirati prikaz in prenos podatkov. Premi in vzmetenje: - BPW-premi, tehnično dovoljene osne obremenitve po 10.000 kg - 1. in 3. os hidro-mehansko prisilno vodeni, nameščeni na vrtljivem ležaju, 2. os toga - Zračno vzmetenje s funkcijo dviga in spusta - Orodje za osi Zavorni sistem: - Wabco zavorni sistem po EU predpisih z EBS-E (4S3M), brez povezovalnih vodov k vlačilcu Električna oprema: - Električna oprema po zahtevah EU, razsvetljava 24 V ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX spredaj s priključki 24N, 24S & 15-polni (po ISO: 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098) Jeklena konstrukcija: - Jeklena konstrukcija iz visoko odpornega finega zrnatega jekla - Kakovost jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Barvanje: - Popolna jeklena konstrukcija je po varjenju avtomatsko peskana (s strojnim peskanjem) - Druga obdelava s korundom za boljši oprijem zaščitnih premazov - Končni premaz z dvema slojema 2K barve, enobarvno v RAL 3002 karmin rdeči po standardu RAL 841GL - Zadnji del kovinsko prevlečen in lakiran v RAL 9010 (čista bela) - Platišča v srebrni barvi - Premaz testiran s preskusom v slanem razpršilu po ISO 9227-NSS - Votle dele zaščiteni s posebnim voskom Gsdpfx Aszhd Niof Rebt Oprema: - Tovorna površina z okoli 30 mm trdim lesom - 2" King pin - Pocinkana jeklena čelna stena (EN12642-XL), pribl. 1.200 mm visoka - Spredaj rumeno-rdeče pnevmatske spojke na pocinkani priključni letvi - 4 zagozde s pritrjevalom spredaj - Odlagalno mesto za približno 1.000 mm dolge snemljive stranice v osrednjem nosilcu zadaj - Na labodjem vratu in na zadnji plošči levo/desno držalo za opozorilne table vklj. z vtičnico - Rumen odsevni trak po zahtevah EU po obodu in zadaj na priklopniku - 10 parov žepov za vzdolžne stranice (pribl. 100 x 50 mm) v zunanjem okviru - Evropske odsevne table (rdeče-rumene) na zadku priklopnika - Držalo za rotacijsko opozorilno luč na zadku - Blatnik na zadku - Navodila za uporabo in opis na USB ključku - Oznake za maksimalno hitrost 80 km/h zadaj in ob strani - Elektro-hidravlična enota - Vlečna spojka za manevriranje z ojačano nosilno traverso - Manometer za določanje osnih obremenitev vključno z obremenitveno shemo - Centralno mazalni sistem BEKAMAX (Pico) z običajno mastjo NLGI-2 in snemljivim zaščitnim pokrovom - Krmiljenje osi spredaj in zadaj s kablom (daljinsko upravljanje s tipkami), z nadzorom izravnanosti osi (brez namestitve v vlačilcu) - 7 parov pocinkanih snemljivih stranic (pribl. 100 x 50 mm, pribl. 1.000 mm visoke) - 4 prečne vrste žepov za stranice, nameščene prečno v tovorni površini (pribl. 100 x 50 mm) - Spiralni kabel za napajanje elektro-hidravlične enote in/ali električnega vitla (pribl. 35 mm², pribl. 3,5 m dolg, max. 250A) med priklopnikom in vlačilcem z NATO-NATO konektorjem Dostopna lestev...

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin Gbsdpfxswvzg Rs Af Rst * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: rabljeno, lastna masa: 9.600 kg, največja dovoljena obremenitev: 30.400 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 12/2011, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles steered, ABS (anti-lock braking system), extendable, lashing rings, attachable loading ramps, front support, rear support, side aluminium underrun protection, storage box. Body: 4-axle low-bed semi-trailer with attachable loading ramps, SAF axles, 3rd and 4th axles steered, 13 pairs of lashing rings, 10 pairs provisions for insertable stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm load height in the low-bed area, low-bed length retracted approx. 9,500 mm, TÜV inspection due, aluminium ramps available at an extra charge of EUR 1,500. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted. Gbsdpfx Ajxxkqzjf Rst

Stanje: novo, največja dovoljena obremenitev: 38.370 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 960 mm, širina tovornega prostora: 254 mm, Leto izdelave: 2026, Proizvajalec: Faymonville Tip: Multimax Plus Leto izdelave: 2026 Vrsta izdelka: Novo Podatki: Gosji vrat, dolžina x širina: 3,70 x 2,48 m Tovornična površina, dolžina x širina: 9,60 x 2,54 m Gbjdpfx Aszdmi Ref Rst Število osi: 3 Nosilnost: 38.370 kg Lastna teža: +/- 11.130 kg Dovoljena skupna masa: 49.500 kg Oprema: BPW osi in vzmetenje, 1. in 2. os fiksni, 3. os vodilna. 3. os z elektro-magnetno blokado za vzvratno vožnjo, samodejno ob vzvratnem prestavljanju in ročno aktiviranje. Tehnična osna obremenitev: 12.000 kg. Nanesen peskani premaz na pokrivnih pločevinah gosjega vratu ter na prehodih med vratom in dvigovalnim ležiščem, med dvigovalnim ležiščem in tovorno površino ter med tovorno površino in rampami. 1 rezervno kolo z nosilcem pod tovorno površino desno pred osmi. Izrezi v zunanjem okviru tovorne površine in dvigovalnega ležišča za obešanje zateznih trakov (LC 2.000 daN). Dodatna oprema: električna vitla, cca 5.400 kg vlečne sile, z daljinskim upravljanjem. Jeklenica cca 24 m dolga, premer cca 9,5 mm, vključno z valjčkom za pritisk vrvi. Montaža vitla spredaj znotraj na gosjem vratu. 1 INOX zaščitna omarica za električno vitlo 5.400 kg, cca 825 x 340 x 390 mm (D x Š x V), ravna izvedba, z 1 pokrovom zgoraj in izrezom za kabel vitla. 1 INOX orodjarna, cca 620 x 300/180 x 950 mm (D x V x G), montirani levo in desno pod tovorno površino pred osmi, zadaj poševni. WABCO Smart Board sistem. Podatki o osni obremenitvi so veljavni le, ko je vozilo v nominalni višini vožnje, sicer so možna odstopanja. Smart Board ima števec prevoženih kilometrov. 1. os s pomočjo pri speljevanju. Razbremenitev zračnih blazin do 30 km/h in do 130% legalne osne obremenitve na preostalih oseh. Upravljanje preko zavornega pedala v vlečnem vozilu. Odlagalna površina za mostne elemente ramp pred osmi. Informacija: vzorčne slike Opomba: Lokacija: Essen, takoj na voljo.

Stanje: novo, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 29.000 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 2.850 mm, skupna dolžina: 29.000 mm, skupna širina: 2.540 mm, skupna višina: 2.850 mm, vzmetenje: zrak, velikost pnevmatike: 385/65-R22.5, Leto izdelave: 2026, Oprema: ABS, - BPW-osovine - EBS - Zračno vzmetenje - Kolutne zavore - Centralno mazanje NOVO MAX210-Z-3AA-13.60-22.5-2.54, neposredno na zalogi Tehnični podatki MAX210-Z-3AA-13.60-22.5-2.54 Skupna masa: 48.000 kg / Pritisk na sklopki: 18.000 kg / Osna obremenitev: 30.000 kg / Lastna teža: 11.456 kg / Nosilnost cca.: 36.544 kg / Višina sklopke (naloženo): 1.150–1.250 mm / Polmer obračanja: 2.300 mm Dolžina nakladalne površine: 13.600 mm / 2-krat izvlečna (2 x 770 mm) do 2.900 mm / Medosna razdalja: 1.810 mm Tehnični opis: Izvlečna nakladalna površina s pnevmatsko zaporo / V osrednjem škatlastem okvirju je fiksna vmesna miza ± 250 mm / 8 parov navzven preklopnih pritrdilnih ušes (LC 5.000 daN) / 3 pari navzven preklopnih pritrdilnih ušes (LC 10.000 daN) / Izrezi v zunanjem okviru za obešanje trakov (LC 2.000 daN) Pnevmatike: Pnevmatike 385/65 R22.5 (znamka: Goodyear) Sistem za nadzor tlaka v pnevmatikah (TPMS): TPMS v skladu z ECE R 141 Osovine: BPW-osovine s kolutnimi zavorami, zračno vzmetene z dvižno/spustnim ventilom. Vse osi hidromehansko prisilno krmiljene. Tehnična osna obremenitev: 10.000 kg (ET 0) Zavorni sistem: WABCO zavorni sistem v skladu z EU-predpisi z EBS-E sistemom (2S2M), brez priključnega kabla na traktor. Jeklena konstrukcija: Jeklena konstrukcija iz visokokakovostnega drobnozrnatega jekla. Kakovost jekla: S355J2+N/S355MC (meja elastičnosti 355 MPa) / S690QL/S700MC (meja elastičnosti 690 MPa) Električna napeljava: Električna napeljava v skladu z EU predpisi, osvetlitev 24 V ASPÖCK-NORDIK (ASS3). Gbedpfx Aezhxgief Rjt ASPÖCK-UNIBOX na pocinkani priključni letvi spredaj s 24N-, 24S- in 15-polnimi vtičnicami. Priključki po ISO / 24N ISO-1185 / 24S ISO-3731 / 15-polni ISO-12098 Opozorilne table: Pod gosjim vratom in zadaj, levo in desno, nosilec za opozorilne table z vtičnico. Opcije: • Manevriranje spredaj in zadaj prek kablovskega daljinca z nadzorom PDC osvetlitve za poravnavo osi (brez montaže na traktor) • Elektrohidravlična enota (cca. 45 kg) • 2 zagozdi za kolesa z nosilcem na pregradi • Kraljevski zatič 2" • Pocinkana jeklena pregrada, cca. 1.600 mm visoka, EN12642-XL • Bela odsevna letev v skladu z EU-predpisi po celotni dolžini in širini. Rdeča zadaj. • EU označevalne table (rdeče-rumene) zadaj. • Nosilec za rotacijsko luč zadaj. • Nakladalna tla iz 30 mm debelega trdega lesa, ojačana z omega profili (cca. 298 kg). • 10 parov držal za kole (cca. 100 x 50 mm), v zunanjem okviru nakladalnega poda. • 1 nosilec za rezervno kolo pod nakladalnim podom desno. • BEKAMAX (Pico) centralni sistem mazanja z 2 črpalkama. • 6 parov izrezov v nakladalnem podu za WADER kontejnerske ključavnice, za 1 x 20', 2 x 20', 1 x 40' ali 1 x 45' kontejner. • 5 parov profilov za kole, nameščenih prečno v nakladalno dno, za kole 100 x 50 mm • Pocinkan prostor za shranjevanje pod nakladalnim podom (2.390 x 720 x 400 mm) • Kljuke za vrvi (8 mm), na vsakih cca. 500 mm pod robnim profilom gosjega vratu in nakladalnega poda • Lestev za vzpenjanje, nameščena levo v smeri vožnje • Inox orodjarna • LED razsvetljava • 10 parov vtičnih kolov (100 x 50 mm, dolžina 1.000 mm) • 8 kontejnerskih ključavnic Splošne informacije Letnik izdelave: 2026...

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni izrezi * Hidravlične nakladalne rampe, nastavljive po širini Gjdpfxswta Ale Af Rjbt * Zračno vzmetenje * Možnost razširitve * Lastna teža: 11.020 kg ----Interna številka vozila: 11010----Napake in vmesna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite udobno preko WhatsAppa WhatsApp nemško, angleško -- WhatsApp nemško, angleško, arabsko

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 12/1997, dolžina tovornega prostora: 16.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, Leto izdelave: 1997, Oprema: ABS, FAYMONVILLE NIZKOPODNOŽJE / RAZTEGLJIVI / AVTOVLEKA / krmilne osi / vitel - - MODEL: STN-3A DMC 38.000 KG LASTNA TEŽA 9.300 KG 3 OSI SAF OSI KRMLJENE OSI VITEL LISTNO VZMETENJE VIŠINA OD TAL 0,85 M VIŠINA DO BALKONA 1,35 M DOLŽINA ZLOŽENE PRIKOLICE 13,2 M DOLŽINA RAZTEGNJENE PRIKOLICE 16,8 M ŠIRINA NAKLADALNA: 2,55 M DOLŽINA BALKONA 4 M PNEVMATIKE: 235/75 R17.5 UVOŽENO NI BILO UPORABLJENO V DRŽAVI 100 % BREZ NESREČ - CENA NETO: 16.900 EUR - - CELOTNA PONUDBA NAŠEGA PODJETJA NA SPLETNI STRANI: Gedoybn Iwjpfx Af Rjbt MOŽNOST POŠILJANJA PODROBNIH FOTOGRAFIJ IN VIDEA NA WHATSAPP, VIBER ALI E-POŠTO ZA VEČ INFORMACIJ NAS KONTAKTIRAJTE TELEFONSKO. GOVORIMO NASLEDNJE JEZIKE: - Poljsko, angleško, nemško, romunsko, špansko, italijansko, francosko, turško, madžarsko, slovaško, slovensko, ruščino: - ukrajinsko, litovsko, latvijsko, estonsko, uzbeško, gruzijsko, armensko, azerbajdžansko, turkmenistansko, češko: -

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: > 3 osi, prva registracija: 11/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Reference number for inquiries: 68574 Faymonville, Platform trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced steering axle * Air supply coupling heads (red + yellow) * Connection plug: 2x 7-pin * Lifting and lowering device * Telescopic – extendable semi-trailer * Suspension: air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Superstructure manufacturer: ES-GE * Extension defective * Steering axles inoperative * Mobile/rollable Gbsdoyib Ahjpfx Af Rst Liability disclaimer: Subject to alterations, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Handling of all (export) documentation * Ordering export or customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport of commercial vehicles Please contact our trained specialist staff—we are happy to assist you.

Stanje: rabljeno, številka stroja/vozila: YAFTL208100007948, konfiguracija osi: 2 osi, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.010 mm, Leto izdelave: 2008, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj - Bobnasti zavorni sistem = Dodatne informacije = Teže Lastna teža: 11.660 kg Nosilnost: 26.340 kg Dovoljena skupna masa: 38.000 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Dodatne informacije Stanje pnevmatik spredaj: 70% Sprednje pnevmatike: 245/70 R17.5 Zadnje pnevmatike: 245/70 R17.5 Zadnji pregled: 29.06.2026 Dodatne informacije Za več informacij se obrnite na Lastas Sales. Gjdeziivwepfx Af Robt

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm Gbodpfozahp Sjx Af Rot * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...