Müller-Mitteltal Ka-Ta-R 14,4 Tandem Dreitseitenkipper M. Anleger nakup rabljenega (62.167)

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black Ksdpfxel Tihuo Aicjdn ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: Kdedpfx Asl Thymeicjn * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings Kdjdpfox Nlkaex Aicon * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN (trailing axle lock for maneuvering purposes—no truck-side installation—assigned to PIN 10 in the 15-pin connector, for shunting purposes only, not for use on public roads) * SmartBoard control box as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at head plate) * Mechanical support windlass at the front, mechanical swing supports at the rear of the chassis * Mechanically adjustable warning sign package at the front and rear * Toolboxes made of galvanized sheet steel—black powder-coated—approx. 650 x 300 x 600 mm on the right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the access ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon with holder and installation * 2 x LED reversing lamps at the rear of the vehicle (controlled by reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber floor * 400 mm steel front wall plug-in * Perforated outer frame approx. 45-degree angled with provisions for 3 t folding lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes in the front and end cross-members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically laterally adjustable * 4-way hydraulic control block for possible retrofit of hydraulic ramp lateral adjustment * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and front support windlass painted in black tone * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of more than 40 ltr up to 120 ltr/min) * New vehicle with manufacturer’s warranty Kodpfor Dpz Ajx Aicedn * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * EK 9.6 ----Brakes: Kdsdpfsw Ndr Uex Aicsn * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange-Type Towing Eye: * Drawbar as central axle drawbar with 40 mm screw-in towing eye * Continuously adjustable drawbar height with spindle lifting mechanism instead of fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation needed on the truck side * 15-pin power socket * LED tail lights * Flashing side marker lights ----General Attachments: * Front support winch * Closed plastic mudguards * Foldable underrun protection for pavers ----Chassis: * Chassis made from fine-grain steel ----Tipper Body: * Pallet - 3-way tipper body * 700 mm steel front wall * Asymmetrical aluminium side walls - continuous without centre stanchion - folding with overtravel catches and swinging via manual central locking * 800 mm high steel tailgate with automatic opening when tipping rearward * 4 mm Hardox 450 steel floor ----Load Securing: * Two pairs of 3 t folding lashing brackets recessed into the steel floor on each side ----Painting: * Chassis, drawbar, underrun protection hot-dip galvanized * Painting of the tipper body in a RAL colour of your choice (no special or metallic paints) can be changed up to approx. 6 weeks prior to completion ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 42/2026

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders Kjdox Nlkgspfx Aicjdn * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: novo, Leto izdelave: 2026, New model, now with 9,900 kg gross weight! Cable drum transport trailer. Permissible total weight 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol; 8.1 kW; electric start) with weather protection cover. Hydraulic drum drive with rubber-coated drive rollers. Drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centering cones for cable drums. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tires 315-80R22.5, tire pressure monitoring. 40 mm adjustable towing eye, dual-line air brakes, LED lighting 12+24 V. Toolbox, advertising panels in the side underride protection. Fully hot-dip galvanized chassis. New vehicle including factory warranty. Available from approx. calendar week 26-2026. (Archive photos) = Further Information = Unladen weight: 2,900 kg Payload: 7,000 kg gross weight: 9,900 kg Front tires: 315-80R22.5 Country of manufacture: DE Kjdpfx Aisyyhb Nocedn Please contact Jan-Marc Schwickert for more information.

Stanje: rabljeno, največja dovoljena obremenitev: 10.080 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6 m³, Leto izdelave: 2017, Oprema: ABS, Stock št. 5820 Müller-Mitteltal 3-stranski tandem jekleni kiper priklopnik / aluminijaste rampe / pocinkovano podvozje / široke pnevmatike! ---- * Proizvajalec: Müller-Mitteltal * Tip: KA-TA-R 13,5 * Prva registracija: 08/2017 * Skupna masa: 13.500 kg * Lastna masa po prometnem dovoljenju: 3.420 kg * Nosilnost: 10.080 kg * Osi: 2 x Gigant / bobnaste zavore * Vzmetenje: listnato vzmetenje * Pnevmatike: 385/55 R 19.5 približno 50% na jeklenih platiščih Kjdpfxszdm S Ss Aicedn * Tehnični pregled: 08/2026 * EBS * Barva: podvozje pocinkano, kiper nadgradnja modra * Prostornina kiperske kadi: približno 6 m³ (5,00 m dolžina x 2,42 m širina x 0,50 m višina) * izvlečne aluminijaste rampe * vlečna kljuka s 50 mm ušesom, nastavljiva po višini * kiper nadgradnja s 4 pari zložljivih pritrdilnih ušes v tleh * nosilec za polno obremenitev spredaj * dodatne zložljive opore zadaj * predal za orodje iz nerjavnega jekla spredaj desno * četrtinski blatnik * certifikat za varovanje tovora * vozilo iz prve roke Nemški priklopnik!! Nemški dokumenti!! Prva lastništvo!! Opomba o morebitnih napakah v oglasu: Kljub skrbni pripravi oglasa lahko pride do posameznih napak v besedilu ali podatkih. Ne prevzemamo odgovornosti za napake, spremembe ali vmesno prodajo. Vse informacije so brez garancije. Prosimo, da nas kontaktirate za preverjanje podrobnosti ali dodatna vprašanja.

Stanje: novo, največja dovoljena obremenitev: 6.900 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Electrical / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting * Flashing LED side marker lights ----Drawbar / Flanged towing eye: * Drawbar with 40 mm bolt-on towing eye (height adjustable in mm) ----General attachments: Kdodpfx Aexyniwoicjn * Support winch at front * Spring-assisted square tube supports at rear with base plate, safety lock pins for various support heights * Enclosed steel fenders with splash guards * Enclosed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for drum securing at the ends of the support arms, as well as latching of the cable drum superstructure to the chassis via a centrally located claw lock * Motor-driven hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepwise offset * Preparation of steel construction and hydraulics for retrofitting an auxiliary engine ----Chassis: * Chassis made of torsion-resistant square sections and cross-members ----Hydraulics: * Hydraulic lines for supply and return ----Tyres: * 315/80 R 22.5 tires ----Painting: * Vehicle is hot-dip galvanized ----Info: * 2,690 kg curb weight * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h Kdodpjr Dpzuofx Aicsn * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalization unit with 100 mm wide parabolic springs ----Drawbar / Drawtube: * Fixed welded drawtube with low-maintenance ball joint for K80 ball coupling (offset by +77 mm / 33 mm via head plate), with raised bracket for connection lines ----Electrics / Lighting: * 12 V, 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from towing vehicle without installation on towing side ----General attachments: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Hot-dip galvanized two-step access ladder in front of the front wall (on FR left) ----Chassis: * Fine-grain steel chassis ----Tipper body: * Steel Pal.- 3-way tipper body with M-Strong side panels (front wall fixed, continuous side panels - without center stanchions - swinging via manual central locking and mechanically foldable with sideboard spring assistor) * Hydraulic tailgate, 500 mm high, functioning as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7-tonne recessed and foldable lashing point in each corner * 4 x 3-tonne recessed and foldable lashing rings on each side ----Ramps: * 1 pair of aluminum drive-on ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receiving compartments for aluminum drive-on ramps, recessed from behind into the chassis * Load securing according to EN 12642 XL ----Coupling height: * Laden approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawtube, rear supports, underrun protection hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black shade ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Braking System: * Without ABS/EBS, homologated for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem-balance unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: * Rigid, welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via mounting plate) with elevated gallows for connection lines ----Electrics / Lighting: * 12 V 7 + 4-pin power supply cable * LED lighting system, 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical drop legs at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Hot-dip galvanized two-step access steps in front of the bulkhead on the left (FR) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Steel pallet three-way tipper body with M-Strong side boards (fixed front wall, continuous sides without central stanchions, swinging via manual central locking, plus mechanically folding with board spring lifters) * Hydraulic tailgate, 500 mm high, engineered as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t recessed folding lashing ring * Each side fitted with 4 x 3 t recessed folding lashing points ----Ramps: * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber and tracked vehicles * 2 recessed storage compartments for aluminum ramps in the rear of the chassis * Load securing compliant with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs, underrun protection hot-dip galvanized * Axles, air tanks, landing gear (front) * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Ksdpfsr Dpz Hox Aicedn * Immediately available ex works Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 38.230 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Müller-Mitteltal nizkopodna prikolica z vdolbinami za kolesa TS 3 RM ML 30,0, 2 višini nakladanja in rampe * Povečanje vertikalne obremenitve sedla iz 12 t na 18 t vklj. Montiran sedelni zatič v: drugi poziciji sedelnega zatiča 2", sedelni zatič do vključno krivljenja 2.750 mm. Zadnji polmer zasuka ca. 2.400 mm v svetli odprtini (priporočamo prosti prostor min. 150 mm). Sprednji polmer zasuka 1.480 mm oz. 1.570 mm z rezervnim kolesom. Opomba: Dovolj prostora do vlečnega vozila mora zagotoviti stranka. * Izvlečni deli za vdolbine za kolesa spredaj in zadaj spodaj (205 mm globoko). 6 kos desk za vdolbine za kolesa z nosilcem kot ležišče v skladu s kodo 09.112 ALU-tlačni zračni rezervoar namesto jeklenega * Smartboard upravljalna omarica kot infotool nameščena na prikolici z tlačnimi senzorji za prikaz skupne obremenjenosti osi. Prikaz možen na upravljalni omarici ali v tovornjaku preko EBS-zračnega vzmetenja (odvisno od proizvajalca tovornjaka) * ?SP-kombi paket: Orodjarna z 45° vogali iz pocinkanega jekla, dodatno prašno lakirana v RAL 9006 bela aluminij, na sedlarski platformi B=2.480 x V=500 mm z zgornjim preklopnim pokrovom, stranskimi vrati in poševno. ALU stranske stene zložljive na sedlarsko platformo (500 mm visoko), ALU zadnja stena vstavna (150 mm visoko), notranje in zunanje ALU stranice lakirane v RAL 9006 bela aluminij. Vklj. zložljivi & snemljivi zadnji stebri, pocinkani (brez zaključnega premaza). Vključuje vijačeno sprednjo konstrukcijo. Dolžina sprednjega okvirja do krivljenja 3.935 mm Sprednji polmer zasuka, brez rezervnega kolesa z dimenzijo krivljenja 2.450 mm oz. 2.750 mm ca. 1.750 oz. ca. 1.480 mm * 2 kosa ležišč za fiksiranje kontejnerjev, vgrajeni v sprednji okvir * 3 ležišča pod sedlarsko platformo za shranjevanje izbirnih ALU ramp ali lesenih desk za prekrivanje vdolbin za kolesa * Zložljivo/izvlečno konzolo (pocinkana) in lesene deske za širitev vklj. (ne na zadnji poševnini), nosilec desk na sedlarski platformi (največja širina tovora največ 2.500 mm) * Druga LED pozicijska luč v opozorilnem paketu spredaj in zadaj (dvojna osvetlitev), le v povezavi z opozorilnim paketom * 2 LED vzvratni žarometi na zadnji strani prikolice, prižgana v vzvratni prestavi (primerno za 12 V in 24 V), največ 2 dodatna kosa dovoljena * 7-polna vtičnica na zadnji strani, vezana za razsvetljavo za prekomerno dolžino z zadnjo lučjo (58 R) in maso * Gumijasta prevleka na nakladalni rampi levo in desno (ca. 860 mm dolžine) 190 07644 gumijasti trakovi, na notranji deski enodelnih ramp * Popolnoma avtomatski centralni sistem mazanja s črpalko (24V), rezervoarjem za mast ter integriranim upravljanjem prikolice, brez priklopa ramp (pri krmiljenju: vključno s priklopom razdelilnika na sedlarsko platformo). Opomba: Možno izključno za vlečna vozila z 24V razsvetljavo! Vmesna prodaja in napake pridržane! Prodaja izključno po naših Splošnih pogojih poslovanja. Kdodpfoy R Ipusx Aicjn Pomembno obvestilo – Pomembna informacija: Kljub natančnemu preverjanju vseh podrobnosti v naši ponudbi se lahko pojavijo napake, ki so posledica prenosa med različnimi platformami. Zato opozarjamo, da so vse informacije brez garancije in ne predstavljajo pravne zahteve. Pravno: Ta prodajni oglas ne predstavlja ponudbe v smislu §145 BGB, ampak informacijo za pripravo pogodbe. Tukaj navedeni podatki so brez garancije in ne predstavljajo zagotovljenih lastnosti.

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering purposes on the 1st axle (operated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle by an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping operation (can be deactivated via control unit in the driver's cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinder * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flanged Towing Eye: * Drawbar with adjustable K80 ball hitch ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with raised tower for connection lines ----General attachments: * Support winch at the front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle Kdedpfxey Tr Hie Aicsn * Removable protective grille for rear lights (not permitted under StVZO regulations and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * 3-way tipper body made of steel (fixed front wall, continuous side walls - without center pillar -, right side wall swinging via central locking and foldable with drop side spring assist) * Left side wall foldable with drop side hydromatics * Rear wall swinging with automatic hook locking * 5 mm steel floor made of HARDOX-450 steel or equivalent ----Load securing: * On each side 4 x 3 t lashing rings recessed in the outer frame, UVV-compliant ----Paintwork: * Axles, air tank, support winch, flanged towing eye painted in a black tone * Tipper body painted in a customer-specified RAL color (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and, barring any delays, will be completed in calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start assist system for maneuvering on the 1st axle (controlled via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension when tipping (can be deactivated via control element in cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes Kdedpfx Aisy Tr Hcscon ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for tractors with 12V & 24V electrics * LED tail lights 12/24 V with galvanized protection box ----Drawbar / Flange towing eye: * Drawbar with K80 ball coupling, adjustable mm ----Coupling height: * Coupling height approx. 440 - 550 mm when loaded with raised tower for connecting lines ----General attachments: * Support winch in front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable tail light guard (not permitted under StVZO, must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * 3-way steel tipper body (fixed front wall, continuous side walls without center stanchions, right side wall swinging via central locking and foldable with side wall spring-assisted lift, left side wall foldable with hydraulic side wall system) * Tailgate swinging with automatic hook locking * 5 mm steel floor made from HARDOX-450 steel or equivalent ----Load securing: * Each side with 4 x 3 ton UVV lashing rings recessed in outer frame ----Painting: * Axles, air tanks, support winch, flange towing eye painted in black * Tipper body painted in a RAL color of your choice (no special or metallic colors, changeable up to approx. 6 weeks before completion) * Chassis, tail light guards hot-dip galvanized ----Information: * Sample images ----Delivery time: * Vehicle is still under construction and, assuming uninterrupted and steady production, will be completed in week 44 / 2026

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.000 mm, skupna višina: 40.000 mm, Leto izdelave: 2014, Oprema: ABS, Za vprašanja v zvezi z vozilom je vam na voljo gospod Seidel (po telefonu). MÜLLER MITTELTAL SF32BM/BT betonska polprikolica Nadgradnja: Liebherr HTM 1004 10m³, osi BPW, bobnaste zavore, vzmetni akumulator, Wabco ABS, 1. os dvižna, zračno vzmetenje, dovoljena skupna masa: 32.000 kg, lastna masa: 6.510 kg, nosilnost: 25.490 kg, profil pnevmatik: 1. os 14-15mm, 2. os 10mm Po želji vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel vas z veseljem vodi po telefonu. Več informacij najdete na naši spletni strani. Kdsdoyfu Sdspfx Aicen ... Napake, spremembe in vmesna prodaja pridržane!!! = Dodatne informacije = Dovoljena skupna masa: 32.000 kg Za dodatne informacije se obrnite na gospoda Tobiasa Eberta.

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak Kdodsn Aw Hkspfx Aicjn ===== Telefon2 Mobilni telefon =====

Stanje: rabljeno, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, skupna dolžina: 7.500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2012, Uporabni material: Beton Lastna masa: 6.530 kg Nosilnost: 25.470 kg Kedpfx Ajx Utq Seicodn Skupna dovoljena masa (zGG): 32.000 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 4.250 kg, največja dovoljena obremenitev: 14.750 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 03/2017, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.000 mm, skupna dolžina: 7.150 mm, skupna širina: 2.550 mm, skupna višina: 2.600 mm, vzmetenje: zrak, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2017, Oprema: ABS, TAKOJ NA VOLJO!!! DOBRO STANJE!!! SCHWARZMÜLLER M-serija Trostrani kiper Tandem prikolica Neto izvozna cena: 19.500 EUR Kdsdpfey N Aitsx Aicjn

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Kdodpfxezfv I So Aicon

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Kodpfx Aiszddktecodn

Stanje: rabljeno, lastna masa: 3.420 kg, največja dovoljena obremenitev: 7.080 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 04/1998, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 245/70R19.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: v prihodu / v tranzitu, jeklena nadgradnja, listnato vzmetenje, 2 osi, tandem, bočna zaščita, podpora spredaj, podpora zadaj, nihajna vrata, nastavljiva višina vlečne naprave Nadgradnja: tristrani kiper priklopnik Priklopnik prihaja iz uprave mesta! Vse informacije brez jamstva, saj je priklopnik v prihodu! PODATKI O OPREMI BREZ JAMSTVA, spremembe, vmesna prodaja in napake pridržane! Kdsdpfsy U Ifdjx Aicon

Stanje: rabljeno, lastna masa: 2.700 kg, največja dovoljena obremenitev: 7.300 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2007, dolžina tovornega prostora: 5.020 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, storage box, height-adjustable drawbar. Body: Tandem low-bed trailer with mechanical loading ramps, 2x BPW axles, drum brakes! Loading height approx. 930 mm! Ramp length approx. 2600 mm! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors. Kdjdpfx Aijwvikqocon

Stanje: rabljeno, prevoženi kilometri: 1.100 km, vrsta prenosa: drugo, barva: rumena, skupna masa: 32.000 kg, lastna masa: 6.210 kg, največja dovoljena obremenitev: 25.790 kg, velikost pnevmatike: 425/65R22.5, prva registracija: 06/2012, vzmetenje: zrak, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, air suspension, first axle liftable, ABS (anti-lock braking system), side under-run protection Body: LIEBHERR concrete mixer type HTM 1004, approx. 10 m³, 2x BPW axles, disc brakes, first axle liftable! Kdsdpfxji Rk Epe Aicen ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 10/2016, Oprema: ABS, Dobrodošli u Johanning’s Nutzfahrzeuge, vašeg specijalistu za mlada i ekskluzivna polovna vozila. ODMAH dostupno! Moguća isporuka. Cena na upit! Finansiranje i lizing moguće na zahtev. Lokacija: 39606 Osterburg Marka: Mueller Mitteltal Tip: TA-2 / ETUE-TA-R 11,9 Godina proizvodnje: 2016 Radna težina: 3.250 kg TÜV: mart / 2026 SP: septembar 2026 Širina: 2,47 m Kjdpfxjycpd Ae Aicjdn Dužina: 6,20 m Visina: 90 cm Za dodatne slike ili video materijal slobodno nas kontaktirajte. Johanning’s Nutzfahrzeuge, Vaš partner za ekskluzivna i mlada polovna vozila. Naše usluge - Vaše prednosti (posle prodaje) - Otkupljujemo Vaše vozilo (u bilo kom stanju) - Besplatna odjava Vašeg vozila odmah - Registracioni servis za 150 € (uključuje takse i tablice) - Privremena registracija - Pregled i probna vožnja mogući u svakom trenutku uz prethodnu telefonsku najavu - Isporuka na Vašu adresu moguća po dogovoru. Greške i prethodna prodaja su mogući.

Stanje: rabljeno, največja dovoljena obremenitev: 29.850 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2012, naslednji pregled (TÜV): 06/2028, Leto izdelave: 2012, Interna številka vozila: G300402 Nemško vozilo Takoj na voljo na našem dvorišču v Kaufungen - Kassel, Nemčija Več INFO pri Luis Lucena Letnik 2012 Lastna masa priklopnika: 6.530 kg Priklopnik mešalec betona LIEBHERR 10 m³ Možne so napake. Z veseljem vzamemo vaše rabljeno vozilo v račun. Financiranje možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Kdodpfoxy Ul Sox Aicsn Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.