Müller-Mitteltal Ka-Ta-R 14,4 Tandem Dreitseitenkipper M. Anleger nakup rabljenega (62.349)

Stanje: rabljeno, največja dovoljena obremenitev: 10.960 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2024, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / Nakladalna širina ca. 2.500 mm Nakladalna višina: ca. 1.100 mm Dodatne informacije Njdpfx Aeytma Asibjla - Jeklo - Vroče cinkano - Aluminijaste naletne rampe - Predal za rampe - 500 mm stranske stranice, preklopne - Vzmeti stranskih stranic - Gigant osi - Pnevmatike 285/70R19,5 - Nastavljiv priklop po višini - Podporna noga spredaj + zadaj - Plastična orodjarnica - Vstop spredaj

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-Loader Three-Way Tipper Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 30505 * Remote diagnosis unit (RDÜ) with display option in the truck via EBS signal * Side marker lights with indicator activation * GVW: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, drop side panels, laser-welded, pendulum-mounted, fold-down and removable, prepared for later retrofitting of side wall extensions * Lockable compartment under the tipping bridge for access ramp * Incl. 1 pair of aluminum loading ramps, 8t/pair, 3.57m * Galvanized chassis, galvanized front wall * 4 UVV lashing rings LC 5,000daN at front and rear + 8 recessed and foldable lashing points LC 3,000daN in tipping floor (centered) * Hardwood excavator bucket rest * Two-step access in front of the front wall (galvanized) * Stepless height-adjustable drawbar, galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Mesh hooks, rear staking posts bolted, galvanized * Extension cables for rear side panel * Plastic toolbox on right chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire-purchase price: for example, €549 per month over 60 months, no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request an offer from us! * We are Müller-Mitteltal trading partners * Free delivery to your site possible with timely order! Nsdpfsyvxg Ijx Aibela ----Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of these hours by appointment We speak German, English, Polish, and French. Whatsapp

Stanje: rabljeno, lastna masa: 4.500 kg, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2015, naslednji pregled (TÜV): 07/2025, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.000 mm, barva: modra, Leto izdelave: 2015, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German trailer * Condition as shown in photos * Müller-Mitteltal three-way tipper, model KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost landing gear * Payload: 13,500 kg If a new TÜV inspection is required, we are happy to offer this through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods, to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details are without guarantee. We do not assume liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Nlsdpfx Aswz H Nbsibea Subject to changes, prior sale, and errors.

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, skupna širina: 2.550 mm, Leto izdelave: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem 3-Way Tipper with many extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-color paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air reservoir, etc.: black. Side and rear wall: RAL 2011 deep orange. Reinforced and certified superstructure according to EN 12642 XL including load securing certificate (only in combination with 500 mm high steel side walls). Rear stanchions bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN, recessed at the front. Mesh hooks integrated laterally and at the rear into the locks of the central locking for the base side wall, as well as an additional 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed-mounted front wall in hot-dip galvanized version, with bolted, galvanized rear stanchions, without additional coating (not on HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially on wide floor plates – warranty claims for this are excluded. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940, ramp length 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), mounted: on the chassis frame on the right in direction of travel. 1 pair of aluminium loading ramps without wheel channel (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/piece. Two-step access in front of the front wall, left side in direction of travel (hot-dip galvanized). Connecting lines extended for agricultural and forestry towing vehicles. Nodpfx Aisvy Tvtsbela Further information New: No

Stanje: rabljeno, največja dovoljena obremenitev: 7.100 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2007, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Vozilo / Nadgradnja: Tandem tri-stranski prekucnik Prva registracija: 07/07 Skupna masa: 10.000 kg Lastna masa: 2.900 kg Nosilnost: 7.100 kg Skupna dolžina: 6.900 mm Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / širina nakladalne površine cca 2.450 mm Višina nakladanja: cca 1.100 mm Dodatne informacije - 40 km/h Nledsyz H Azopfx Aiboa - 500 mm stranice - 500 mm pocinkovani sprednji nastavek - 7 parov pritrdilnih obročev na nakladalni površini - 4 pari pritrdilnih obročev pod zunanjim delom nadgradnje - Podporna noga - Zadnja opora - Dvižna vzmet za stranico - Nakladalne rampe opcijsko 1.280,00 €

Stanje: rabljeno, največja dovoljena obremenitev: 7.000 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/1999, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Skupna masa: 10.000 kg Lastna masa: 2.000 kg Nosilnost: 7.000 kg Skupna dolžina: 6.900 mm Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / Širina naklada cca 2.450 mm Nlodpfxeyz H A Ij Aibsa Višina nakladanja: cca 1.100 mm Dodatne informacije - 40 km/h - 500 mm stranice - 500 mm pocinkana prednja nadgradnja - 8 parov pritrdilnih ušes na nakladalni površini - 4 pari pritrdilnih ušes pod nadgradnjo zunaj - BPW osi - Podporna noga - Dvižna vzmet za stranice - Nalivne rampe opcijsko 1.280,00 €

Stanje: rabljeno, lastna masa: 3.650 kg, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 07/2011, naslednji pregled (TÜV): 08/2024, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 285/70R19.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, tandem, air suspension, ABS (anti-lock braking system), tailgate, lashing eyes, underrun protection, front support legs, rear support legs, pendulum tailgates, height-adjustable drawbar. Body: Tandem 3-way tipper trailer with aluminium sideboards, 2x Gigant axles, drum brakes! Nljdpfxjth Uavj Aiboa Loading ramps available at an additional cost of €990.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Stanje: rabljeno, lastna masa: 4.190 kg, največja dovoljena obremenitev: 13.810 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2016, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R22,5 160J, velikost zadnje pnevmatike: 385/55R22,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Sidrne zanke, aluminijaste stranske stranice 800 mm, doplačilo za rampe 800 €, -- Pridržujemo si pravico do tiskarskih napak, sprememb in razlik v podatkih, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Nedsy Hc T Hspfx Aibjla

Stanje: rabljeno, lastna masa: 3.680 kg, največja dovoljena obremenitev: 10.720 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2021, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55R19,5 156J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R19,5 156J, velikost zadnje pnevmatike: 385/55R19,5 156J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, KOT NOVO, široke pnevmatike, kiper ploščad CINKANA, 12 pritrdilnih obročev, stranske stene 600 mm, doplačilo za rampe 1.000 €, -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, vzorčne slike --, Več podatkov na zahtevo! Nlodpfx Aioy E H Rysbea

Stanje: rabljeno, lastna masa: 3.320 kg, največja dovoljena obremenitev: 10.180 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 12/2003, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 5.040 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19,5 148/145J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 285/70R19,5 148/145J, velikost zadnje pnevmatike: 285/70R19,5 148/145J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Sidrne ušesa, doplačilo za rampe: 800 €, -- Pridržujemo si pravico do tiskarskih napak, sprememb in drugih nepravilnosti, slike so simbolične --, Več podatkov na zahtevo!, Več podrobnosti: ! Nlsdpfx Aijyy I S Iobja

Stanje: novo, največja dovoljena obremenitev: 10.970 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, KA-TA-R 14.4 - LKW tandem trostrani kiper - Nosivost serijski cca: 11.050 kg Nljdpfxsxmwiye Aibsa - Povećanje ukupne dozvoljene mase na 14,4 t kod guma 285/70R19.5 - Unutrašnje dimenzije: 5.000 x 2.420 x 500 mm - Visina poda pod opterećenjem: 1.040 mm - 1 šasija sa zaštitom od podletanja, vruće pocinkovana - Lakiranje: osovine sa oprugama, vazdušni rezervoari itd. u crnoj boji - 3 para upuštenih i preklopnih veznih kuka u čeličnom podu, LC 3.000 daN - ABS 2S/2M, 24 volti - 2 podizne opruge za čelične bočne stranice visine 500 mm - 1 centralno zaključavanje levo i desno, njihajuće kod nepreklopnih bočnih stranica Dodatna oprema: 1 par UVV veznih prstenova upuštenih u čelični pod, umesto na čelični pod 1 čelični pod od Hardoxa 450, debljine 4 mm Podešavanje visine vučne ruke preko ugaonog prenosa sa ručnim pogonom umesto serijskog 1 par alu rampi bez ivica (8,0 t/par), 3.500 x 400 x 105 mm pogodno za pneumaticima i guseničarima Kutija za alat

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on towing eye ----General attachments: * Jost landing gear at the front * Side underrun protection * Foldable A-panel at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions * Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear ----Loading edge: * Unloaded loading edge approx. 710 mm ----Load securing: Nsdpfx Aijl Th Eysbela * 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * The axles, springs, landing gear, and air tank painted in a black tone ----General information: * Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Lateral underrun protection * Foldable A-frame shield at the rear ----Electrics / Lighting: * 15-pin power socket * Multi-chamber taillights Nodpsl Th Dmofx Aibsla ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each * Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unloaded loading height approx. 710 mm ----Load Securing: * 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips * Each side with 1 x (13.5 t) UVV tie-down point for securing lashings * 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paint / Finish: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: Nlodpfsrvvflox Aibsa ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (adjustable by 300 mm) * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * Tire Pressure Monitoring System (TPMS) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation for subsequent mounting of container locks in front of the bulkhead * Bolted smooth sheet steel bulkhead * Side walls made of trapezoidal-profiled steel, foldable with board wall spring lifts * Steel rear wall, slidable between the ramps — storage bracket for unused rear wall in front of the bulkhead * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various drill holes in the header and tail member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear access slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall * Drop side color in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available for an additional charge ----Information: * -- Reinforced and certified body according to EN 12642 XL incl. load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with load equalizer unit ----Drawbar / Towing Eye: * Height-adjustable drawbar with 300 mm adjustment range * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange-mounted towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting Nledpfxexglibs Aibja ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, with drop side assist * Steel rear wall, slidable between the ramps (with storage holder inside front bulkhead when not in use) * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t flip-up lashing brackets every 600 mm * In each corner at front and rear, 1 x 6.3 t lashing ring * Various holes in front bulkhead and rear cross-member for 1.2 t securing options ----Ramps: * One-piece mechanical steel grid drive-on ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear slope approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop side color in RAL 2011 deep orange * Side wall paintwork in any RAL color shade available at extra cost ----Further Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: Nedpfxoq Dyvvo Aibsla * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release mechanism for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (up to 300 mm) * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * RDÜ (Tyre Pressure Monitoring System) * LED lighting ----General Attachments: Nsdpoxglh Refx Aibola * Jost landing gear at the front * Externally mounted, hot-dip galvanised folding supports at the rear * Plastic toolbox front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Trapezoidal-profiled steel side panels, foldable and with board wall spring lift * Steel rear wall can be slid between the ramps; storage bracket in front of bulkhead when not in use * Bolted rear posts ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating access ramps with spring unit for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanised chassis as well as drawbar, bulkhead, ramps and rear wall * Side panel colour RAL 2011 deep orange * Painting of side walls in other RAL colours possible at extra charge ----Information: * --Reinforced and certified body in accordance with EN 12642 XL including load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from KW 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: Nodpev Eq Evefx Aibjla * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Support winch at the front * Rear fold-out support legs (external) * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead and rear slope for retrofitting container locks for transporting 20" containers * Bolt-on bulkhead made of smooth sheet metal * Trapezoidal-profiled steel side panels, mid-hinged, split once * Rear panel, insertable between the ramp holders, can be stored in front of the bulkhead when not in use * Bolt-on rear stanchions ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various holes in the bulkhead and end crossmember for 1.2 t lashing possibilities ----Ramps: * One-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approx. 860 mm chassis approach angle at rear ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, tailboard, fold-out support legs, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in a black hue * Sideboard panels painted RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ----Information: * Reinforced and certified body to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * 15-pin power connector * LED lighting ----General Fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards Nlodpev D Tcbofx Aibja ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Bolted smooth sheet metal bulkhead * Side panels made of trapezoidal profiled steel sheet, foldable, split once in the middle * Steel rear wall, can be inserted between the ramp holders when not in use, stored inside at the front wall * Bolted rear stakes ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2t lashing capacity every 480 mm * Option to fit 3t recessed lashing rings every 600 mm * 1 x 6.3t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2t lashing options ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm on chassis ----Wheelbase: * Wheelbase 1,140 mm ----Painting: * Drawbar, bulkhead, tailgate, folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye and support winch painted in a shade of black * Side panels painted in RAL 9010 pure white * Side panel painting in other RAL colors available at extra cost ----Information: * Reinforced and certified construction in accordance with EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf on the A7

Stanje: skoraj kot novo (rabljeno), največja dovoljena obremenitev: 14.400 kg, skupna masa: 12.080 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 285/70R19.5, medosna razdalja: 1.140 mm, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2022, - ETM-TA 14.4: - Wabco ABS braking system - Emergency release system for spring-loaded cylinders - Drum brakes, 2 x 7 t Gigant axles - Parabolic springs with tandem balance unit - Height-adjustable drawbar (+/- 150 mm) with 40 mm bolt-type towing eye - Jost landing gear at front, side underrun protection - Foldable A-panel at rear - 15-pin electrical connector, multi-chamber tail lights - Fixed steel front and side walls - Removable steel tailgate - Floor made of 50 mm softwood - 1 sliding wear plate 750 x 1,000 mm in the front area incl. 2 drop-in skip stops at the front, adjustable in 2 positions - 4 repositionable skip stops, adjustable in 2 positions, for lateral centering of containers Nsdjxvbcpopfx Aibjla - 1 x (13.5 t) UVV lashing eye per side for attaching tensioning elements - 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tension force 6,300 kg) - Rear crossmember for attaching aluminium loading ramps incl. 2 additional rear drop legs - Loading edge (unladen): approx. 710 mm - Chassis, front wall, side walls, mudguards, drawbar, and rear drop legs hot-dip galvanized - Axles, springs, landing gear, and air reservoir painted black - Tyres: 285/70R19.5 - Wheelbase: 1,140 mm - Loading edge (unladen): approx. 710 mm - Colour: hot-dip galvanized - Vehicle with one-day registration (06/2024), not loaded/used due to missing tyre pressure monitoring system - New vehicle with manufacturer's warranty - Errors and prior sale excepted - Immediately available ex Egestorf on the A7

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo Nedpoyxbgcefx Aibela MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Nledpfx Aeyw N Npsibsa Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-bed Three-way Tipper Trailer with Ramps Reference number for inquiries: 11612 * BRAND-NEW VEHICLE, available immediately, painted in RAL 9016 traffic white * Delivery to your site possible for an additional charge! * Gross weight: 11,900 kg, payload: 8,750 kg * Galvanized floor, 5m x 2.42m x 0.5m; side walls are pendulum-mounted, foldable, and removable; prepared for later fitting of side wall extensions * Bulkhead is hot-dip galvanized * Lockable compartment under the tipping bed for loading ramps * Includes access ramps, 3.31m, 8t pair * 4 UVV lashing rings LC 5000daN at front and rear * 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centered) * Net hooks * Drawbar infinitely height-adjustable, hot-dip galvanized, tow eye 40mm * Frame galvanized * Tyres 235/75R 17.5, (4 units), BPW axles, parabolic springs * Tire pressure monitoring * EBS (Electronic Braking System) * LED lighting system for 12+24 volts * Side marker lights with indicator activation * Bolted, galvanized rear stanchions * Excavator bucket rest mounted on the bulkhead ---- Please request an offer from us. Additional equipment available on request. Financing from as little as €405 net/month over 72 months with no down payment and no final balloon payment. Offer provided by our financing partner "FM LeasingPartner". ---- Our business hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Nlodpfx Aioyl Ebpebea Appointments outside opening hours possible by arrangement. WhatsApp Leasing, financing, and trade-in available----

Stanje: rabljeno, lastna masa: 2.910 kg, največja dovoljena obremenitev: 7.590 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2009, naslednji pregled (TÜV): 04/2025, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing rings, underrun protection, front support, rear support, swinging tailgates. Nsdpfjv S H Sfjx Aibjla Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost from €900 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, Leto izdelave: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Many Extra Features Equipment: - 2 spring-assisted lifts for 400mm high steel side walls - Reinforced and certified superstructure according to EN 12642 XL load securing certificate - 10 UVV lashing hoops in the existing perforated pattern in the outer frame - Additional clamped wooden floor - 235/75R17.5 tyres - 4 BPW axles instead of GIGANT - Platform extension by 870 mm to a total of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating Nodpfx Aisxcxmfsbjla - Lockable toolbox with 45 kg load capacity Paintwork: - Wheels: silver - Chassis / front wall / drawbar / rear wall / stakes / ramps: hot-dip galvanized - Axles / springs: black - Side walls: RAL2011 deep orange We will be happy to offer you suitable financing, hire purchase, or leasing solutions. Delivery or shipping available by arrangement. We always have a selection of new equipment in stock and demo units available. Feel free to contact us! We rent vehicles with or without drivers, as well as machinery. A wide range of used machines and equipment always available. Subject to technical modifications, errors, and prior sale.