Tristrani nagibni priklopnik

MÜLLER-MITTELTAL Tandem-3-Seiten-Kipper KA-TA-R 11,9

Stanje: novo, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.035 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 1.475 mm, Leto izdelave: 2026, Oprema: ABS, * Humbaur three-way tipper * HTK 10 50 24 * Year of manufacture: 2026 * GVW: 10,500 kg * Payload: 7,500 kg * Unladen weight: 3,000 kg * Overall dimensions: 6960 x 2550 x 1475 mm * Deck dimensions: 5035 x 2420 x 500 mm Itedpeqnrtaofx Ab Hjd * Steel drop sides: 500 mm high * Infinitely height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electrical and air brake connections on the drawbar * Ramp storage compartment with 2 aluminium loading ramps integrated into the chassis frame * 8 t loading ramps available for an extra charge of €1,499 IMPORTANT NOTICE! PLEASE READ CAREFULLY! We expressly reserve the right of prior sale, as this item is also being offered on other platforms. We strongly recommend an inspection and check to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and checks can be arranged at any time by appointment and are expressly encouraged! Images are similar and may show optional equipment subject to an extra charge. Specified internal dimensions are approximate. TRADE-IN POSSIBLE FOR ALMOST ANYTHING!! EXCHANGE DEALS AND TRADE-UPS POSSIBLE!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 5.600 kg, skupna masa: 7.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.030 mm, višina nakladalnega prostora: 400 mm, skupna širina: 2.200 mm, skupna višina: 1.400 mm, Leto izdelave: 2025, * Humbaur HTK 754020 * Three-way tipper trailer * New vehicle * Tandem axle * Year of manufacture: 2025 * Gross vehicle weight: 7,500 kg * Unladen weight: 1,900 kg * Payload: 5,600 kg Ijdjttfm Hopfx Ab Hstd * Overall dimensions: 6,040 mm x 2,200 mm x 1,400 mm * Internal dimensions: 4,000 mm x 2,030 mm x 400 mm * Loading height: 920 mm * Steel side and rear drop sides, foldable and removable * Rear drop side swinging with central locking * Height-adjustable tow bar approx. 590 mm - 930 mm * Torsion suspension and parabolic springs * Integrated shaft for ramp storage * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made of 4 mm steel sheet * 3 pairs of recessed lashing points * Air brake with load-dependent braking (ALB) / anti-lock braking system (ABS) ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to sell the item elsewhere, as it is also offered on other platforms. We strongly recommend an inspection and assessment to avoid any misunderstandings regarding condition and suitability. Viewings and inspections are possible at any time by prior arrangement and are expressly encouraged!!! Images are for reference only and may include optional, chargeable accessories. The stated internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART EXCHANGES AND EXTRA PAYMENTS POSSIBLE!!! Display location: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, lastna masa: 11.300 kg, največja dovoljena obremenitev: 29.700 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2006, vzmetenje: zrak, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German semi-trailer * Special low-loader for transporting commercial vehicles and construction machinery * Manufactured by premium Dutch builder Estepe (Estepe type E0PL 24-41) * Years of experience in building such specialized low-loaders for truck and construction machinery transport – every detail considered * Naturally equipped with extendable low-bed, hydraulic ramps, and hydraulic platform * Special winch with remote control, etc. * BPW axles * 3rd axle - lift axle * Air suspension with lift/lower function * Central lubrication system Ijdpfx Abertbb Ss Hotd * Gross vehicle weight: 41,000 kg * Unladen weight: 11,300 kg * Payload: 29,700 kg Should you require a new TÜV inspection, we will gladly provide a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV certification, new SP, or new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We strongly advise and recommend viewing and inspecting the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible and expressly welcomed at any time by appointment. All details are provided without guarantee. We do not accept liability for errors or inaccuracies in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: novo, številka stroja/vozila: ebf3f771e96394cd89e56bbb7, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Central-axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes screwed into the floor/external frame, each rated at 5 tons 2 additional pairs of lashing eyes screwed into the floor, each rated at 5 tons, in the corners Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter-shell fenders 1 plastic toolbox with shelf, dimensions 620mm (w) / 360mm (h) / 440mm (d), lockable with a padlock (padlock not included) Central-axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles and suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalization (rocker compensation) Iodpsi Rixrjfx Ab Hotd Wheels and tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Steel/Tread plate floor for high point load capacity Note: Minor floor waviness possible due to welding distortions! Platform length approx. 5,200 mm Rear slope approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, height 400 mm Sideboards 25 mm aluminum hollow profile, height 400 mm, foldable and removable Rear wall / rear corner posts 1 pair of steel posts attached to the frame with bracket for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Covered with 3 toothed steel rails With gas pressure springs for single-person operation Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Front wall: aluminum Sideboards: anodized aluminum Loading ramps: hot-dip galvanized Attention! These are archive images.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized Itedpfx Asktm Susb Hsd - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, Oprema: ABS, * Drum brakes Itedpfx Aewdcg Iob Hod * Storage compartment for ramps * Aluminium ramps, load capacity per pair: 8,000 kg available on request, price: €1,800 net * Frame fully hot-dip galvanized * 10 lashing rings on the loading area * Loading height approx. 990 mm * Height-adjustable drawbar * Side walls with spring assistance * Trailer immediately available * Suspension: leaf springs * Payload: 8,750 kg * Tyres: 235/75R17.5 ----Specifications subject to change – errors excepted – prior sale reserved

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: Ijdpfx Abjl Th Dus Hotd * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm front right side on the chassis * 15-pin power socket * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks installed at each locking point of the central locking system, plus 2 hooks on the front wall * Chassis made of fine-grained steel * Steel pallet three-way tipper body with continuous side walls, internal tube reinforcement, no center posts, foldable with drop-side spring assist * Rear posts bolted * Combination steel wing-door tailgate, asymmetrically split with 2 leaves, can be swung and locked to 270°, not foldable; with additional pendulum frame for automatic tailgate opening during tipping, rear locking with galvanized rotary bolt and central locking system, deactivation function for automatic tailgate function when tipping backwards with open wing door * Each corner fitted with 1 x 5 t lashing ring, and each side with 4 x 3 t lashing points recessed in the outer frame * 4 mm fine grain steel floor plate * Rear mounting rail for loading ramps * Reinforced structure with cargo securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment from the rear, recessed under the loading area in the chassis for storing the ramps * Chassis, drawbar, underrun protection, rear post, and rear folding supports galvanized * Axles, springs, air tank, and landing gear painted black * Tires 285/70 R 19.5 * Drop-sides painted RAL 9010 pure white * Sidewall painting available in an RAL color of your choice for an additional charge * Vehicle has day registration (unused) * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes Itsdpfx Abstr St Uj Hod ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Type Towing Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of fine-grain steel ----Tipper Platform: * Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall * Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting * Rear stanchions bolted * Steel rear wall slid in front of the ramps * Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm floor made of fine-grain steel ----Ramps: * Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tanks, towing eye, and landing gear painted in black * Sidewalls and platform in RAL 9010 pure white * Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from calendar week 07/2026