Müller-Mitteltal 18 To, Luft, Seitliche Alu Wände, Rollplane nakup rabljenega (38.272)

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrical / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: Kljdjl Thwcjpfx Aiceu * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear collision protection buffers * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, possible container length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 removable skip stops for lateral centering of the skips, front 4 skip stops inserted with pendulum mount * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 lashing bars each, cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings to the front ----Ramps: * 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side Kodpfol Tphrex Aicslu * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS brake system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange eye: * Drawbar with 40 mm screwed towing eye (height adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring ----General attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate; safety locking pins for various support heights * Closed steel sheet mudguards with splash protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Superstructure: * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with tension locks for securing the drum at the ends of the support arms, and central claw locking device securing the drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-covered drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf Kljdpfju I Iqljx Aicju

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brake System: * EBS braking system * Drum brakes * Emergency release device for spring brake cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate. Safety locking pins for various support heights * Closed steel mudguards with spray protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor inlay (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: Ksdpou I Iq Ejfx Aicelu * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock on the drum arm ends, plus central claw lock securing the cable drum superstructure to the chassis * Motor-driven hydraulic cable drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped ----Chassis: * Chassis made from torsion-resistant square tubing and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Notes: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9,9 ML: ----Zavora: * EBS-zavorni sistem * Bobnasta zavora * Naprava za nujno sprostitev za vzmetno shranjevalni valj ----Os: * BPW os ----Vzmetenje: * Parabolične vzmeti ----Vlečna cev / prirobnica vlečne zanke: * Vlečna cev s 40 mm vijačno vlečno zanko (nastavljiva po višini mm) ----Elektrika / Razsvetljava: * 15-polni električni priključek * LED razsvetljava * utripajoče LED stranske označevalne luči * RDÜ nadzor tlaka v pnevmatikah Klsdju I Iqfopfx Aiceu ----Splošni priključni deli: * Podporna vitla spredaj * Vzmetno podprte kvadratne podpore zadaj z osnovno ploščo; varnostni zaporni zatiči za različne višine podpore * Zaprta blatnika iz jeklene pločevine z zaščito pred pršenjem * Zaprta stranska zaščita z možnostjo uporabe kot oglasna površina * Plastična orodjarna z dnom (v ležeči vgradnji) pribl. 500 x 350 x 400 mm ----Nadgradnja: * Zasučna kabelska vitelna nadgradnja, svetla širina med ročicami vitla 1.700 mm, z zapiralom za pritrditev vitla na koncih nosilne roke ter z aretacijo kabelske vitelne nadgradnje in podvozja z osrednjo kremensko zaporo * Motoriziran hidravlični pogon vitla z oljnim motorjem * Ventili in premični pogonski valji z gumijasto prevleko * Hidravlični regulator hitrosti in zavora za pogon vitla * Jeklena vitelna os premera 76 mm z centriranjem in vrtljivimi konci * 1 par centrirnih stožcev iz poliamida, stopničasto oblikovanih ----Podvozje: * Podvozje iz torzijsko odpornih kvadratnih cevi in prečk ----Črpalna enota: * Hidravlična črpalna enota z bencinskim motorjem Loncin, vključno z ročnim in električnim zaganjalnikom * Rezervoar za gorivo in ročni zaganjalnik * 13 KM z zobniško črpalko (150 bar) ----Pnevmatike: * 315/80 R 22,5 ----Lastna masa: * 2.690 kg lastne mase ----Barva: * Vozilo je vroče pocinkano ----Informacije: * Novo vozilo s polno proizvajalčevo garancijo * Napake in vmesna prodaja pridržane ----Dobavni rok: * dobavljivo približno od 41. tedna/2026 dalje

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9,9 ML: ----Zavorni sistem: * EBS-zavorni sistem * Bobnaste zavore * Naprava za odklepanje vzmeti v zavornih cilindrih v sili ----Os: * BPW os ----Vzmetenje: * Parabolične vzmeti ----Vlečna gred / Vlečni obroč: * Vlečna gred z 40 mm vijačenim vlečnim obročem (nastavljiva po višini mm) ----Elektrika / Razsvetljava: * 15-polni električni priključek * LED osvetlitev * Utripajoče LED stranske označevalne luči * RDÜ sistem za nadzor tlaka v pnevmatikah ----Splošni priključki: * Sprednje podporno vitlo * Zadnje kvadratne podporne noge s podporno ploščo, vzmeteno, z varnostnimi zatiči za različne višine * Zaprti blatniki iz jeklene pločevine s ščitnikom proti brizganju * Zaprta stranska zaščita za uporabo kot oglasni prostor * Plastična orodjarna s talno oblogo (v ležeči postavitvi) pribl. 500 x 350 x 400 mm ----Nadgradnja: * Zasukljiva kabelska navojna nadgradnja, širina med nosilci 1.700 mm s pritrdilnim zapiralom za varovanje bobna na koncih rok ter zaklepom bobnaste nadgradnje s podvozjem s centralno nameščeno krempljasto zaporo * Motorno-hidravlični pogon bobna z oljnim motorjem * Ventili in pomične pogonske valje obložene z gumo * Hidravlični regulator hitrosti in zavora za pogon bobna * Jeklena os bobna s premerom 76 mm s centriranjem in vrtljivimi konci * 1 par centrirnih stožcev iz poliamida s stopničasto prehodnostjo ----Podvozje: * Podvozje iz torzijsko odpornih kvadratnih cevi in prečnih nosilcev ----Črpalni agregat: * Hidravlični črpalni agregat z bencinskim motorjem Loncin, vključno z ročnim in električnim zagonom * Rezervoar za gorivo in ročni zaganjalnik * 13 KM z zobniško črpalko (150 bar) ----Pnevmatike: * 315/80 R 22,5 ----Lastna masa: Kodpfou I Iqrox Aicelu * 2.690 kg lastne mase ----Barvanje: * Vozilo je vroče pocinkano ----Informacije: * Novo vozilo s polno garancijo proizvajalca * Napake in predprodaja pridržane ----Dobavni rok: * Na voljo približno od 41. tedna 2026 dalje.

Stanje: rabljeno, največja dovoljena obremenitev: 29.850 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2012, naslednji pregled (TÜV): 06/2028, Leto izdelave: 2012, Interna številka vozila: G300402 Nemško vozilo Takoj na voljo na našem dvorišču v Kaufungen - Kassel, Nemčija Več INFO pri Luis Lucena Kjdpfx Aijxy Ul Sjcjlu Letnik 2012 Lastna masa priklopnika: 6.530 kg Priklopnik mešalec betona LIEBHERR 10 m³ Možne so napake. Z veseljem vzamemo vaše rabljeno vozilo v račun. Financiranje možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, lastna masa: 4.500 kg, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2015, naslednji pregled (TÜV): 07/2025, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.000 mm, barva: modra, Leto izdelave: 2015, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German trailer * Condition as shown in photos * Müller-Mitteltal three-way tipper, model KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost landing gear * Payload: 13,500 kg If a new TÜV inspection is required, we are happy to offer this through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Klodpfxswz H Nbj Aicju You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods, to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details are without guarantee. We do not assume liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: rabljeno, največja dovoljena obremenitev: 9.050 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 03/2014, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Skupna teža: 11.900 kg Lastna teža: 2.850 kg Nosilnost: 9.050 kg Skupna dolžina: 7.400 mm Dolžina nakladalnega prostora: ca. 5.500 mm Širina: 2.550 mm / nakladalna širina ca. 2.430 mm Kodpfx Aijzc Dnvjcelu Višina nakladalnega prostora: ca. 1.100 mm Dodatne informacije - Vlečna ojka nastavljiva po višini - Sprednje podporno stojalo nastavljivo po višini - 800 mm stranice + zadnja stranica zložljive - Deljene stranice, Kinnegrip K20 - BPW osi - Zračno vzmetenje - Podložne zagozde Vozilo je lahko polepljeno ali označeno z oglaševanjem.

Stanje: rabljeno, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2020, naslednji pregled (TÜV): 11/2026, Oprema: ABS, Nemško vozilo iz prve roke brez nesreč Stranske stranice iz aluminija SAF osi Bobnaste zavore dobro vzdrževano stanje Kledpfx Aey Haz Ujicou najem, nakup, najem z odkupom polni servis najem od 590 EUR mesečno neto (cene najema so odvisne od trajanja pogodbe) vse informacije pod Primer najema z odkupom: 479 EUR mesečno neto pri trajanju 36 mesecev, posebna najemnina 5.000 EUR neto in končna rata 2.000 EUR neto. Vse cene so neto, brez DDV in pod pogojem pozitivne kreditne ocene.

Stanje: rabljeno, največja dovoljena obremenitev: 13.640 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2019, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.500 mm, HU: NOVO Skupna masa: 18.000 kg/20.000 kg Lastna masa: 4.360 kg Kodpfx Aioyw Ep Secelu Nosilnost: 13.640 kg/15.640 kg Dodatne informacije - dvojna kolesa 235/75R17,5 - osi Gigant - 4 pari pritrdilnih obročkov - pnevmatska zapora - znižljivo podvozje - nakladalne rampe pribl. 2.300 mm v prostor za shranjevanje - zadnja podporna noga - skladiščna omarica - zaščita proti podletu

Stanje: rabljeno, največja dovoljena obremenitev: 6.610 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2017, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 34 m³, Leto izdelave: 2017, Oprema: ABS, 2-Axle Müller-Mitteltal TA-2 Pr.+Pl. Trailer VIN: H0061885 Chassis / Attachments: * Air suspension * Tyres: 235/75 R17.5 * Remaining tread: approx. 70% * 1x Jost landing leg * 2x rear support legs Body: * Pr.+Pl. * Sliding curtain * Edscha sliding roof * Dimensions: 5,500 mm x 2,470 mm x 2,500 mm * Approx. 34 m³, 13 pallets Weights: * Gross weight: max. 10,500 kg - derated to 10,000 kg (no SP required) * Unladen weight: 3,390 kg * Payload: 6,610 kg Other: * German vehicle * Main inspection valid until 10/2026 * No SP required due to de-rating New main inspections, safety inspections, or adjustment of permissible weights (down- or upgrading) available on request. We are also happy to assist you in obtaining export/transfer registration plates. Delivery of your purchased vehicles within Germany is also possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typing errors. Subject to changes, prior sale, and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for clients worldwide. Leible Nutzfahrzeuge specializes in the sale of both new and used commercial vehicles. Our 11,000 m² premises offer a variety of vehicles to choose from. Our corporate philosophy stands for fairness and trustworthiness. Customer satisfaction is very important to us, which is why we offer our clients a comprehensive service package and provide them with a dedicated contact person to support them throughout the purchase or sale process. See for yourself! Our services for you: Kljdpfsy Squpsx Aiceu Vehicle loading We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to assist you in organising special transports. Temporary/export registration plates We are happy to assist you in obtaining export or temporary registration plates. Customs formalities We are happy to assist you with customs procedures.

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool installed with pressure sensors for displaying axle group loads * Reflective contour tape on the sides and rear * LED beacon (removable) at the rear * 15-pin electrical connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front enclosed individual plastic mudguards * Rear straight steel mudflaps with spray suppression * Side underrun protection * Extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable folding lids (folding lids open towards the rear) * Chassis made from high-strength fine-grain steel Klodpfjxmpykex Aicou * Floor over bogie platform made of 50 mm softwood, and in the low-bed platform made of 60 mm softwood * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t each at the front left and right on the main frame of the bogie platform; one pair of 13.4 t lashing rings at the front and rear sides of outer frame; one pair of 10 t lashing rings on each side foldable and lowerable, loadable in all directions, integrated into the side frame; 5 t bolted lashing rings on the outer frame of the wheel recesses (2 per front wheel recess, 1 per rear); 2 pairs of 6.4 t lashing rings at the excavator stick compartment * 11 pairs of fold-out outriggers for overall width of 3 m (not on the rear incline) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for width-extension planks, steel, mounted crosswise to the loading area in front of the first rear axle * Excavator stick compartment above the rear axle extending to the end of the ramp incline, approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulic extendable tip, approx. 4,650 x 720 mm * Hydraulic sideward ramp displacement * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded deck height approx. 890 mm ± 20 mm (including 860 mm ramp incline) * Chassis, bogie, fold-out outriggers, rear supports, and access ramps fully hot-dip galvanized * Axles, air tanks, and drawbar painted in black shade * Tires: 235/75R17.5 * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle Ksdpfxsxmpydo Aicelu * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as Return-to-Ride (RtR) valve ----Drawbar: Drawbar, 1,200 mm long with 40 mm draw eye and height adjustment via tension spring & turnbuckle ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool (for axle load display – front and rear separately) * Tire pressure monitoring system with display possibility in the truck via EBS signal, no installation required on the truck side * 15-pin power connector * LED lighting 12/24 V * LED beacon (removable) at the rear ----General Attachments: * Side underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle (FA) plastic quarter mudguards with spray protection * Rear axle (RA) straight galvanized steel mudguards with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, powder-coated black, mounted right side * Box in rotating frame for accessories, with folding lid, 2 pcs. container locks permanently fitted (directly after the rotating frame platform) * 2 galvanized steps on the rotating frame, left and right ----Low-loader Platform: * ROBOT-welded anti-slip covering to the steel plate of the rotating frame platform (protruding weld beads) ----Load Securing (Load Securing Package consists of): * 2 lashing eyes (13.4 t) front left & right at the front wall crossmember * 1 pair of UVV lashing rings (13.4 t) at the front & rear, and 3 pairs UVV lashing rings (10 t) each side, pivotable and lowerable, loadable in all directions and recessed in the outer frame * 3 stake pockets each side with simultaneous 2 t lashing capability * Profifix lashing rail lengthwise in the center axis, in the flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m total width (not on rear slope) * Widening planks stored in the middle of the loading area ----Ramps: * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for future retrofitting of hydraulic ramp shifting Klsdpfstplwisx Aicsu ----Excavator Arm Rest: * Excavator arm rest over rear axle, continuous up to the end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned laterally in the longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm air suspension ----Coating/Paintwork: * Chassis, rotating frame, folding outriggers, fall supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tanks, drawbar painted in a black tone ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, PT 30 Profile: ----Braking System: * EBS (electronic braking system) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and height adjustment via traction spring & turnbuckle ----Electrical / Lighting: * Smart-Board information system mounted on the trailer (for axle load indication – separate front and rear display) * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear ----General Attachments: Kledpfx Aisxptn Recou * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud skirts with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in the bogie for accessories, with folding lid and 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low Loader Platform: * Robot-welded non-slip overlay on the steel plate of the bogie platform (protruding weld seams) ----Load Securing (La-Si package consisting of): * 2 lashing eyes (13.4 t) front left & right on front bulkhead carrier * 1 pair of UVV lashing rings at front & rear (13.4 t) and 3 pairs of UVV lashing rings on each side (10 t), pivotable and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets on each side, each with 2 t lashing capacity * Profifix lashing rail in longitudinal axis, centered in flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear taper) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way control block for future retrofit of hydraulic ramp lateral adjustment ----Excavator Arm Rest: * Excavator arm rest above rear axle, extending to the rear end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, located laterally in the main longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm (air suspension) ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports and ramps hot-dip galvanized * Axles, slewing ring, air tanks, and drawbar painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering purposes on the 1st axle (operated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle by an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping operation (can be deactivated via control unit in the driver's cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinder * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flanged Towing Eye: Kljdpjy Tr Hisfx Aicou * Drawbar with adjustable K80 ball hitch ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with raised tower for connection lines ----General attachments: * Support winch at the front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable protective grille for rear lights (not permitted under StVZO regulations and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * 3-way tipper body made of steel (fixed front wall, continuous side walls - without center pillar -, right side wall swinging via central locking and foldable with drop side spring assist) * Left side wall foldable with drop side hydromatics * Rear wall swinging with automatic hook locking * 5 mm steel floor made of HARDOX-450 steel or equivalent ----Load securing: * On each side 4 x 3 t lashing rings recessed in the outer frame, UVV-compliant ----Paintwork: * Axles, air tank, support winch, flanged towing eye painted in a black tone * Tipper body painted in a customer-specified RAL color (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and, barring any delays, will be completed in calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start assist system for maneuvering on the 1st axle (controlled via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension when tipping (can be deactivated via control element in cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for tractors with 12V & 24V electrics * LED tail lights 12/24 V with galvanized protection box ----Drawbar / Flange towing eye: * Drawbar with K80 ball coupling, adjustable mm ----Coupling height: * Coupling height approx. 440 - 550 mm when loaded with raised tower for connecting lines ----General attachments: * Support winch in front Kodpfx Aisy Tr Hcjcolu * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable tail light guard (not permitted under StVZO, must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * 3-way steel tipper body (fixed front wall, continuous side walls without center stanchions, right side wall swinging via central locking and foldable with side wall spring-assisted lift, left side wall foldable with hydraulic side wall system) * Tailgate swinging with automatic hook locking * 5 mm steel floor made from HARDOX-450 steel or equivalent ----Load securing: * Each side with 4 x 3 ton UVV lashing rings recessed in outer frame ----Painting: * Axles, air tanks, support winch, flange towing eye painted in black * Tipper body painted in a RAL color of your choice (no special or metallic colors, changeable up to approx. 6 weeks before completion) * Chassis, tail light guards hot-dip galvanized ----Information: * Sample images ----Delivery time: * Vehicle is still under construction and, assuming uninterrupted and steady production, will be completed in week 44 / 2026

Stanje: rabljeno, prva registracija: 10/2013, Leto izdelave: 2013, ABS, EBS, avtomatski nastavki prečk, 2x 10 t osi (BPW), zračno vzmetenje, bobnaste zavore, parkirna vzmetna zavora na zadnji osi, pnevmatsko spuščljiv vlečni drog, izpušni ventil na sprednji osi, napenjalec z ragljo, hidravlično bočno vpenjanje, zaprt shranjevalni zaboj, dva vzvratna žarometa, zaboj za mrežo, nosilec rezervnega kolesa, zaprta bočna zaščita, fiksna zadnja podvozna zaščita, zadnji spodnji odbijač na podvozni zaščiti, preklopni A-znak, prostornina zabojnika 2x10 m³ ASK-kiparka. EXW 27793 Wildeshausen Na voljo takoj Kledpfjy S Sx Njx Aicou

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal T4 Low Loader Trailer * SAF axles with drum brakes * Twin tyres * Low bed with extendable loading platform * Hydraulic loading ramps, movable (2 units) Klsdpoy Skl Ijfx Aicou * Drive-over gooseneck * Additional rear supports * Turntable construction ----Dimensions & loading area * Loading area approx. 9,800 mm * Loading width: 2,550 - 3,000 mm * Loading height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892----Subject to errors and prior sale----Advertising and various lettering have been digitally removed. -----We are happy to assist you with any formalities arising from the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other things, we can offer you the following services at an additional cost: ----Trade-in of your old vehicle TÜV/general inspection Complete export processing Financing brokerage Obtaining export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----Your VTS Team

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe Kodpfx Aiowmpbdjcolu - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, skupna dolžina: 7.500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2012, Uporabni material: Beton Lastna masa: 6.530 kg Nosilnost: 25.470 kg Kledpfx Aex Utq Sjiceu Skupna dovoljena masa (zGG): 32.000 kg

Stanje: rabljeno, največja dovoljena obremenitev: 14.760 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2016, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 930 mm, prostornina tovornega prostora: 16 m³, Oprema: ABS, * 7452 - ID vozila za telefonska povpraševanja * ABS, EBS, BPW osi, kolutne zavore, zračno vzmetenje, centralno mazanje, aluminijaste stranske stranice 1,00 m, perforirani letvici levo + desno, 2x zaboj za orodje * Nakladalna višina: 1,35 m Kedpfjzd Nd Djx Aicjlu * Pnevmatike spredaj: 385/65R22,5 (3 / 11 mm) * Pnevmatike zadaj: 385/65R22,5 (3 / 6 mm) ----naš e-poštni naslov:     naša storitev za vas:       - Pridobitev kratkoročnih ali izvoznih registrskih tablic       - Transport / dostava po celotni EU       - Carinjenje vozil v tretje države Če imate vprašanja v ruskem jeziku, lahko pokličete naslednjo številko * WhatsApp samo za govorce ruščine: * Whatsapp za angleščino, nemščino in druge jezike:

Stanje: rabljeno, prevoženi kilometri: 232.524 km, moč: 251 kW (341,26 KM), prva registracija: 04/2021, vrsta goriva: dizel, lastna masa: 9.100 kg, največja dovoljena obremenitev: 8.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 4x2, medosna razdalja: 5.200 mm, zavore: zaviranje z motorjem, barva: modra, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, prostornina tovornega prostora: 40 m³, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.210 mm, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, nadzor oprijema, računalnik na krovu, tempomat, zapora diferenciala, VOLVO FM-330 4x2R keson s cerado Emisijski razred Euro 6, Razpored osi 4x2, Avtomatski menjalnik, Ksdpfxjzd D Tao Aicolu Listnato/zračno vzmetenje, VEB, Klimatska naprava, Servisna knjižica, Prostornina motorja 10.837 ccm, Lastna teža 9.100 kg, Nosilnost 8.900 kg, Skupna masa vozila 18.000 kg, Dvižna ploščad (nosilnost) 1.500 kg, Aluminijaste stranice, Tovorni prostor 7,3 x 2,48 x 2,21 m, Medosna razdalja 5,20 m, Prvi lastnik Odkupujemo tudi vaš tovornjak ali ga sprejmemo v račun. Možen je ogled vozila na daljavo preko WhatsApp ali Viber. Po dogovoru lahko organiziramo dostavo na vaš naslov v Nemčiji in Evropi ali do mednarodnih pristanišč za doplačilo. Po želji lahko na daljavo izvedemo tudi preverjanje kakovosti (TÜV - doplačilo). Hitre in enostavne možnosti financiranja za stranke iz Nemčije. Pri izvozu izven EU je treba zakonsko določeni DDV vplačati kot depozit. Pridržujemo si pravico do napak in vmesne prodaje. Več ponudb si lahko ogledate na naši spletni strani. Z veseljem odgovorimo na vsa vaša vprašanja. Nemščina in angleščina:, Češčina, francoščina, ruščina, bolgarščina, nemščina in angleščina: Vsi podatki so informativne narave vključno z opremo in dodatki.

Stanje: rabljeno, prevoženi kilometri: 11.000 km, moč: 103 kW (140,04 KM), število postelj: 2, vrsta goriva: dizel, vrsta prenosa: samodejen, barva: siv, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2027, skupna dolžina: 5.990 mm, skupna širina: 2.050 mm, skupna višina: 2.690 mm, konfiguracija osi: 2 osi, emisijski razred: Euro 6, skupna masa: 3.500 kg, Leto izdelave: 2024, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, parkirni grelec, Pozdravljeni in dobrodošli pri Reisemobile Dülmen! Želite svet odkrivati na štirih kolesih – z lastno prikolico ali avtodomom? Potem ste pri nas na pravem mestu! Ne glede na to, ali nas obiščete osebno ali pa omogočimo video-svetovanje na daljavo: naša izkušena ekipa vam je vedno na voljo, vas strokovno svetuje in deli uporabne nasvete o potovanju z vozili. Novo za vas: Enostavno in brez obveznosti si preko WhatsApp-a rezervirajte termin – vaše želeno vozilo vam pokažemo v živo in odgovorimo na vsa vprašanja. Veselimo se, da vas spoznamo – digitalno ali pri nas na lokaciji! Vaša ekipa Reisemobile Dülmen ----* Motor / podvozje: Fiat Ducato 2.2 Multijet 3 * Moč: 103 kW / 140 KM * Menjalnik: avtomatski * Prevoženih kilometrov: 11.000 km * Dovoljena skupna masa: 3.500 kg * Postelja: zakonska postelja * Sedežna skupina: stranska sedežna garnitura ----POSEBNA OPREMA: * 1. lastnik (zasebna last) * Fiat avtomatski menjalnik * Multimedia X-Zent z vključno vzvratno kamero (Play in Androidlink) 8" zaslon na dotik * Truma dizelsko ogrevanje * Truma upravljalna plošča CP+ * FIAT posebna barva CAMPOVOLO ali LANZAROTE * Premium paket Fiat: * 90 L dizelski rezervoar * Komarnik na vhodnih vratih * Priprava za radio, 2 zvočnika * Trakcija+ in pomoč pri spustu * Prednji odbijač v barvi vozila * Električna zunanja ogledala * Zatemnitvene žaluzije v kabini * Litij-ionska baterija 100 Ah * DC/DC polnilec 17 A * Solarna plošča 120 W * Vlečna kljuka Fiat Ducato furgon * Thule tenda * Dodatno zračno vzmetenje zadnje osi * 18" aluminijasta platišča z celoletnimi pnevmatikami ----Opomba k fotografijam Prikazane slike so simbolične. Lahko vsebujejo doplačljivo dodatno opremo ali prikazujejo različne barve in tkanine oblazinjenja. Naši pogodbeni partnerji Kot uradni prodajalec ponujamo vozila blagovnih znamk: * Caravelair * Eura Mobil * Forster * Frankia * Hobby * Kabe * Lifestyle Camper * Morelo * Mobilvetta * Randger * Rimor * Rhön Camp * Sun Living * Yucon Enostavno do individualnega financiranja Po želji vam nudimo prilagodljivo financiranje z ročnostjo med 12 in 150 meseci – z ali brez pologa. Če želite vaše rabljeno vozilo dati v proti račun – ni problema, pripravimo vam pošteno ponudbo. Pridržujemo si pravico do sprememb, vmesne prodaje ter napak in tiskarskih pomot. Odkrijte več na naši spletni strani Veliko naših modelov lahko poleg nakupa tudi najamete! Več informacij na:   Naš delovni čas Ponedeljek – petek: 09:00 – 18:00 Sobota: 10:00 – 16:00 Nedelja (dan za ogled): 11:00 – 16:00 (brez svetovanja, brez prodaje) Opomba: Kodpfjzfxdcex Aicelu Naš Morelo Showroom je ob nedeljah zaprt.   Tako nas kontaktirate: Pisarna: ? 78 98 563 Naša WhatsApp podpora: (0) ----Pridržujemo si pravico do sprememb, vmesne prodaje in napak. ----ustvarjeno s SYSCARA