Kässbohrer Sls Hs Tieflader Mit Hydr. Schwanenhals + Rampen nakup rabljenega (11.675)

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Cjdpfxemfqi Ie Aiqorf Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: rabljeno, lastna masa: 10.720 kg, največja dovoljena obremenitev: 37.280 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, naslednji pregled (TÜV): 02/2027, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5 ---/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70 R17,5 ---/141J, velikost zadnje pnevmatike: 245/70 R17,5 ---/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, popolnoma prevozen, -- pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Crodpfx Aijztd Snsqjf

Stanje: rabljeno, lastna masa: 8.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl. 9.500 mm, dolžina tovorne površine nizkega ležišča pribl. 7.360 mm, višina nakladanja pribl. 910 mm, 14 parov pritrdilnih obročev, vozilo se prodaja po naročilu stranke. Pridržujemo si pravico do tiskarskih napak, sprememb in napak, slike so vzorčne. Več podatkov na zahtevo! Cedpfezr Uh Djx Aiqerf

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Credpozr Uihofx Aiqef

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Credpfxozrhqls Aiqjf

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Crsdpfx Aiszrhlieqef

Stanje: rabljeno, skupna masa: 120.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2016, Števila vozila: W09TS6012G0M49121 TELESKOPSKO podaljšanje za 7.000 mm - ŠIRINA se lahko poveča do 3.200 mm hidravlično vzmetenje hidravlični pogon - vtičnica po standardu NATO največja obremenitev sedla: 24.000 kg - obremenitev osi: 2+6 x 12.000 kg skupna masa: 96.000 kg - (z reduktorjem na 2 osi 120.000 kg) lastna teža: 20.300 - 22.370 kg (z reduktorjem na 2 osi 25.280 - 27.350 kg) veljavnost nemške tehnične preglede (DE HU) globina nakladalne platforme (Schwandenhals): pribl. 3.750 mm višina sedla: 1.300 - 1.400 mm = kraljevi čep (Königszapfen) 3,5 palca nizka platforma: dolžina: 10.350 mm (od tega 350 mm nagnjena) - širina: 2.550 mm - višina nakladalne površine: pribl. 880 mm z reduktorjem na 2 osi je dolžina za 3.300 mm večja ŠIRINA se lahko poveča na 3.200 mm gumirane, hidravlično nastavljive po višini in v stranski smeri, razdeljene rampe - 2.300 + 2.300 = 4.600 mm, širina 830 mm tehnična obremenitev osi: 6 + 2 x 12.000 kg osnove Gigant z bobnovimi zavorami - HIDRAVLIČNO VZMETENJE os 1, 2, 3, 4 - možnost DVIGANJA 2+6 x VOLANJA OS, hidravlično prisilno usmerjanje radijsko upravljanje Cjdozq Ixaepfx Aiqerf centralni sistem za mazanje pnevmatike: 245/70 R 17,5 Pridržujemo si pravico do sprememb, prodaje medtem in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu kupoprodajne pogodbe. Odločilna je opis v kupoprodajni pogodbi. Naša ponudba je na splošno brez novega tehničnega pregleda (TÜV). Če je nov tehnični pregled zaželen, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko opremljeno z oglaševalnimi nalepkami in/ali oznakami. Veljajo naši splošni pogoji dostave in plačila.

Stanje: rabljeno, lastna masa: 8.620 kg, največja dovoljena obremenitev: 36.380 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 13.550 mm, vzmetenje: zrak, velikost pnevmatike: 445/45R19,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45R19,5 160J, velikost zadnje pnevmatike: 445/45R19,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Malo rabljeno, višina nakladalne platforme približno 990 mm, 12 x zaporni elementi za kontejnerje, za 1 x 20-čevni ali 2 x 20-čevna ali 1 x 40-čevni kontejner, dodatno plačilo za nakladalne rampe 1.000 €, – tiskarske napake, spremembe in napake pridržane, vzorčne slike, več podatkov na: !, Več podrobnosti: ! Crjdezqty Nopfx Aiqsf

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Csdpfx Aszqfr Deiqjrf

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Cedpfx Aijwmpbdsqorf Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * Zavorno sistema EBS * Naprava za sprostitev v sili za cilindrične vzmetne akumulatorje * Bobnaste zavore * 3 x 11 ton, osi BPW Eco * Listnate vzmeti * mehanski izravnalnik osi zadaj * stranski odbijač * vrtljive opore zadaj na okvirju voznega podvozja * mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * sprednji zaprti plastični blatniki in zadnji ravni pocinkani jekleni ščitniki, opremljeni s ščitniki proti brizganju * odsevni trak ob strani in zadaj * pokrov (vroče pocinkan), za orodjarno v platformi podvozja * orodjarna iz pocinkane jeklene pločevine, cca 650 x 300 x 600 mm – črna, prašno lakirana – na strani pod vozilom * 15-polni vtič * LED osvetlitev 12 / 24 V * LED rotacijska luč (snemljiva) zadaj * vlečna prikolica s 40 mm vlepno palico in nastavitvijo višine s pomočjo vzmeti in zapornega mehanizma * na vsaki strani 4 žepov za pritrditev (vendar brez pritrdilnih palic), hkrati možnost pritrjevanja * Paket La-Si, sestavljen iz: 2 vlepnih palic (6,4 t) spredaj levo in desno na glavnem okvirju platforme podvozja * 5 parov UVV pritrdilnih obročev, vrtljivih in spuščajočih * obremenitev v vse smeri, vgrajeno v zunanji okvir v kotih, 13,4 t, sicer 10 t * 6 parov mehanskih iztegnjenih podstavkov za 3 m celotne širine (vendar ne na zadnjem nagibu) * podaljševalne deske pod tovorno površino, shranjene v predalu * nosilec za žlico bagra, ki sega od zadnje osi do zaključnega nosilca, dolžina cca 2.100 mm (2 para 6,4 t pritrdilnih obročev na strani nosilca za žlico bagra) * hidravlične iztegnjene rampe (cca 4.650 x 720 mm) z hidravlično iztegnljivim končnim delom in varnostnimi ventili za zadrževanje tovorja, hidravlični bočni premik ramp * hidravlični razdelilnik pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 l do največ 140 l/min), dvojna hidravlična povezava Cedpfx Aoq Dyv Ijiqorf * tovorna površina nad vrtljivim obročem: cca 1.960 x 2.520 mm * zadnja tovorna površina: cca 6.500 x 2.520 mm (vključno z 860 mm nagibom za vožnjo) * višina tovora cca 860 mm +/- 30 mm kompenzacijski agregat * podvozje, vrtljiv obroč, iztegnjeni podstavki, zadnje opore in iztegnjene rampe, vroče pocinkane. * osi, vzmeti, vlečna prikolica, zračni rezervoar itd., lakirane v črni barvi. * Novo vozilo z garancijo proizvajalca. * Pridržujemo si pravico do sprememb in napak. * Na voljo takoj, dobava iz Egestorfa.

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * Zavorno sistema EBS * Naprava za odklepanje zavor v primeru izrednih razmer za cilindrične zavorne zavornice * Bobnaste zavore * 3 x 11 ton BPW osi Eco * Listne vzmeti * mehanična poravnava osi zadaj * stranski zaščitni element * vrtljiva opora zadaj na okvirju * mehansko nastavljivi opozorilni znaki spredaj in zadaj * sprednji, zaprt plastični blatnik ter zadnji, ravno upognjen jeklen zaščitni element z zaščito proti brizganju * odsevni trakovi ob straneh in zadaj * pokrov (prevlečen s cinkom) za orodjarno na platformi podvozja * orodjarna iz pocinkanega jekla, pribl. 650 x 300 x 600 mm - črna, prašno lakirana - nameščena ob strani podvozja * 15-polni električni vtič * LED-osvetlitev 12 / 24 V * LED-rotacijska luč (odstranljiva) zadaj * vlečna priprava s 40 mm vlecno palico in nastavitvijo višine s pomočjo vzmetne palice in zapornice * ob straneh po 4 žepov za pritrditev (vendar brez pritrdilnih palic), hkrati omogočajo pritrditev z jermeni * paket La-Si, sestavljen iz: 2 pritrdilnih točk (6,4 t) spredaj levo in desno na glavnem okvirju platforme podvozja * 5 parov UVV pritrdilnih obročev, vrtljivih in spustljivih * obremenljiv v vseh smereh in vgrajen v zunanji okvir, v kotih 13,4 t, sicer 10 t * 6 parov mehanskih raztegnih opor za 3 m celotne širine (vendar ne na zadnjem nagibu) * plošče za širitev pod tovorno površino, shranjene v predalu * podpora za roko bagra čez zadnjo os do zaključnega nosilca, dolžina pribl. 2.100 mm (2 para pritrdilnih obročev 6,4 t ob strani na podpori za roko bagra) * hidravlične raztegljive rampe (pribl. 4.650 x 720 mm) s hidravlično raztegljivim končnim delom in varnostnimi ventili za zadržanje tovora, hidravlična stranska premika ramp * hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku nad 40 l/min do maks. 140 l/min), hidravlični sistem z dvema vodoma * tovorna površina nad vrtljivim obročem: pribl. 1.960 x 2.520 mm Codpjtplwfjfx Aiqerf * zadnja tovorna površina: pribl. 6.500 x 2.520 mm (vključno z 860 mm nagibom) * višina nakladanja v obremenjenem stanju pribl. 860 mm +/- 30 mm kompenzacijski agregat * podvozje, podvozna plošča, raztegnite opore, opore zadaj in dostopne rampe, prevlečene s cinkom. * osi, vzmeti, vlečna priprava, zračni rezervoar itd., črne barve. * Novo vozilo s proizvajalčevo garancijo. * Pridržujemo si pravico do spremembe cen in razpoložljivosti. * Na voljo takoj iz Egestorfa.

Stanje: rabljeno, največja dovoljena obremenitev: 18.050 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, širina tovornega prostora: 2.520 mm, Oprema: ABS, ? Vzmetne rampe ? Nosilec za rezervno kolo ? Na stran: 7 x pritrdilnih obročev ? Na stran: 4 x žepki za stranice Csdpsy T Tvxsfx Aiqorf ? Vlečno oko 50 mm ? Nakladalna višina: pribl. 910 mm ? Bobnasta zavora ? ABS ? Listno vzmetenje ? EBS ? Dvojna kolesa Vse informacije brez garancije / Pridržujemo si pravico do predhodne prodaje.

Stanje: rabljeno, skupna masa: 109.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2013, skupna širina: 2.750 mm, Oprema: ABS, Identifikacijska številka vozila: XNJ76C5UC12H01185 Električna hidravlika – NATO vtičnica Dovoljena teža sedla: 25.000 kg – Osne obremenitve: 7 x 12.000 kg Skupna masa: 109.000 kg Lastna masa: 19.820 kg Tehnični pregled v Nemčiji zapade Csdpfx Aiezhdhfsqerf Labodji vrat: 4.300 mm Višina sedla: 1.300 – 1.400 mm = zatič 3,5 palca Spodnji del prikolice (tiefbett): dolžina: 12.415 mm (od tega 300 mm poševno) – širina: 2.750 mm – višina nakladanja: ca. 880 mm MOŽNOST RAZŠIRITVE do 3.200 mm Obešalne tirnice Tehnične osne obremenitve: 7 x 12.000 kg Broshuis osi z bobnastimi zavorami – HIDRAVLIČNO VZMETENE Os 1 + 2 dvižni 6 x krmiljene osi, hidravlično prisilno vodene Centralno mazalni sistem Pnevmatike: 245/70 R17,5 Pridržujemo si pravico do sprememb, vmesne prodaje in napak. Opis služi za splošno identifikacijo vozila in ne pomeni jamstva po kupnopravnem pravu. Za obvezno je šteje opis, določen v prodajni pogodbi. Naša ponudba je načeloma brez novega tehničnega pregleda (TÜV). Če želite nov tehnični pregled, vam lahko posredujemo ponudbo naših partnerskih servisov! Vozilo je lahko polepljeno ali označeno z reklamami. Veljajo naši splošni pogoji dobave in plačila.

Stanje: rabljeno, največja dovoljena obremenitev: 21.130 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 11/2026, skupna širina: 2.540 mm, skupna višina: 1.980 mm, Oprema: ABS, Kässbohrer SLL 2-axle lowbed with hydraulic steering Manufacturer: Kässbohrer Model / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed semi-trailer Country of registration: Germany Credpfsynprwjx Aiqjf Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Overall width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40/60/80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional ride height increase of 40 mm possible * Load gauge for axle load display * Semi-automatic axle alignment with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Braking system in accordance with UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED rear and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED rotating beacon (1 unit) Tyres & Wheels * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system as per R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on gooseneck Steering & Controls * Hydraulic steering on both axles * Control panel in vehicle * Radio remote control for external steering control * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallisation (85% zinc / 15% aluminium) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood flooring * Each platform: 100 × 1,300 × 2,115 mm * Weight per platform: 225 kg * Each platform with 2 × lashing rings (8,000 kg pull force) * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Load Securing * Lashing rings: * 1 × 2 units 13.4 t at gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform * Stake pockets: * 6 × 2 units in pool (50 × 100 mm) * 3 × 2 units at rear (50 × 100 mm) Body Components & Accessories * Aluminium front panel on gooseneck: 360 × 1,550 mm * Aluminium side panels: 360 × 1,900 mm * Aluminium rear panel: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning signs (423 × 423 mm, up to 1,000 mm) * Yellow side reflector band * Red rear reflector band For further information, please contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 16.950 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2006, naslednji pregled (TÜV): 04/2026, Leto izdelave: 2006, * Müller Mitteltal T3 NG * Low-loader * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tyres: see pictures * BPW axles * Immediately available * Subject to prior sale and errors excepted Crjdpfx Aioyv Ug Deqsf Do you have any questions? Contact us for prompt advice – also available directly via WhatsApp: We offer: Net purchase for companies within the EU with VAT ID number as well as for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed on classified ad platforms are gross prices and already include the statutory VAT of 19%.

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40,0 ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za izredno sprostitev zavor za cilindere vzmetne akumulacije * Bobnaste zavore ----Osi: * 4 x 11 t Gigant osi ----Vzmetenje: * Zračno vzmetenje s sistemom za dvig in spuščanje ter ventilom RtR ----Povezava vlečne glave: * Naravna povezava vlečne glave s 50 mm vtičnico in brezstopenjsko nastavljivo višino ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikazovanja na zaslonu tovornjaka preko signala EBS - brez namestitve na tovornjaku * SmartBoard kot informacijsko orodje z senzorji tlaka za prikaz obremenitve osi na posamezni skupini osi * 15-polni električni vtič * LED zadnje luči * LED obodna svetila (odstranljiva) zadaj ----Splošni dodatni deli: * Paketi opozorilnih tablic spredaj in zadaj * 2 x orodne omare iz pocinkane in prašno lakirane jeklene pločevine, cca 650 x 300 x 600 mm, na desni strani * Spredaj zaprt plastični blažilnik * Zadaj ravne jeklene zaščitne plošče s ščitnikom proti brizganju (zmanjšanje pršenja) * Stranski zaščitni element ----Površina nizkega nakladalnika: * Podaljšana platforma z vrtljivim podvozkjem za 520 mm, z 45° koti in 3 vgrajenimi predali z pokrovi in ključavnico * Talna obloga nad platformo z vrtljivim podvozkjem iz 50 mm iglasta lesa, v platformi nizkega nakladalnika pa iz 60 mm iglasta lesa * Gumijasta obloga 20 mm namesto lesene talne obloge v območju poti, s skupno dolžino nizke platforme 6.780 mm, vključno z rampo za vožnjo * Gumijasta obloga na rampi za vožnjo na levi in desni strani, dolžina cca 860 mm * Na vsaki strani 4 žepi za opornike (oporniki niso vključeni), skupaj z možnostjo pritrjevanja dveh ton * Okvir, izdelan iz visoko trpežnega finozrnatega jekla ----Šasi: * Šasi iz visoko trpežnega finozrnatega jekla ----Zavarovanje tovora (paket Lasi): Platforma z vrtljivim podvozkjem: * 2 para 13,4 t pritrdilnih točk v zunanjem okvirju platforme z vrtljivim podvozkjem Nizka platforma: * Na vsaki strani 4 pari 10 t pritrdilnih točk na zunanjem okvirju, z možnostjo spuščanja in obremenitve v vse smeri * Na vsaki strani zadaj 2 para 13,4 t pritrdilnih točk, ki se lahko vrtijo ----Rampe: Csdpeylfvmjfx Aiqorf * Gumijasta obloga na zložljivih rampah za vožnjo * Hidravlične zložljive rampe z hidravlično nastavljivim končnim delom, cca 4.650 x 720 mm * Hidravlično stransko premikanje ramp in varnostni ventili za obremenitev ----Zadnja opora: * Hidravlična zadnja opora ----Širitev: * 8 parov pocinkanih zložljivih podaljškov za 3 m skupne širine (vendar ne na zadnji rampi) * Plošče za razširitev, nameščene na levi strani v predelu za shranjevanje ----Nosilec za bager: * Nosilec za bager nad zadnjo osjo do konca rampe za vožnjo, cca D=2.100 mm x Š=740 x V=190 mm * 2 para 13,4 t pritrdilnih točk na nosilcu za bager ----Hidravlika: * Hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku, ki je večja od 40 - maks. 120 l/min) ----Dimenzije nakladalnega prostora: * zadnja nakladalna površina: cca 6.780 x 2.520 mm (vključno z 860 mm rampo za vožnjo) * nakladalna površina nad vrtljivim podvozkjem: cca 2.990 x 2.520 mm ----Višina nakladanja: * pribl. 890 mm, +/- 20 mm ----Barvanje: * Stranska in zadnja odsevna pasova * Šasi, vrtljivi podvozek, rampe za vožnjo in zložljivi podaljški, vroče pocinkani * Osi, povezava vlečne glave, zračni rezervoar in vrtljivi podvozek, pobarvani v črno barvo ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders Crjdpsl Tihuefx Aiqof * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: Cedpjl Tnvgsfx Aiqjrf * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders Crsdpfsxptn Dsx Aiqjf * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40,0 ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za hitro sprostitev zavore za vzmetne akumulatorske cilindre * Bobnaste zavore ----Osi: * 4 x 11 ton Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvigalom in spuščanjem ter ventilom za ohranjanje višine ----Vlečna naprava: * Naravna vlečna naprava s 50 mm vlečno oglico in nastavljivo višino ----Elektrika / Osvetljava: * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikazovanja na zaslonu tovornjaka preko signala EBS – brez dodatne namestitve na tovornjaku * SmartBoard kot informacijsko orodje z dajalniki tlaka za prikaz obremenitve osi na vsaki skupini osi * 15-polni vtič * LED zadnje luči * LED luči za osvetlitev vseh strani (odstranljive) zadaj ----Splošni dodatni deli: * Paketi opozorilnih tabel spredaj in zadaj * 2 x orodjna omara iz pocinkane, prašno lakirane jeklene pločevine, približno 650 x 300 x 600 mm, na desni strani * Spredaj zaprt, plastičen, posamični blatnik * Zadaj naravna jeklena ščitnika za blatnike, vsak z zaščito proti brizganju (zmanjševanje brizganja) * Stranski zaščitni sistem Cjdpfoylfvgex Aiqsrf ----Nizka platforma: * Podaljšana platforma z vrtljivo podvozi za 520 mm, z 45° koti in 3 vgrajenimi predali z pokrovi, ki se lahko zaklenejo * Talna obloga nad platformo z vrtljivo podvozi iz 50 mm, v nizki platformi pa iz 60 mm iglavca * Gumijasta obloga 20 mm namesto lesene talne obloge na območju teka, z dolžino nizke platforme 6.780 mm, vključno z rampo za vožnjo * Gumijasta obloga na rampi za vožnjo, levo in desno, dolžine približno 860 mm * Na vsaki strani 4 žepi za nosilce (vendar nosilci niso vključeni), hkrati pa omogočajo pritrditev tovora z 2 tonami * Hidravlično nastavljivi stranski raztezniki za 3 m širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu * Nosilec za roko bagra nad zadnjo osjo do konca rampe za vožnjo, približno D=2.100 mm x Š=740 x G=190 mm * 2 para pritrdilnih točk 6,4 tone, stransko v nosilcu za roko bagra ----Podvozje: * Podvozje iz visoko trdnega jekla z drobno zrnato strukturo ----Pritrditev tovora (paket Lasi): Platforma z vrtljivo podvozi: * 2 para 13,4-tonske pritrdilne točke v zunanjem okvirju platforme z vrtljivo podvozi Nizka platforma: * Na vsaki strani 4 pare 10-tonske pritrdilne točke na zunanjem okvirju, ki se lahko spustijo in so obremenljive v vse smeri * Na zadnji strani, na vsaki strani 2 para pritrdilnih točk 13,4 tone, vrtljivih ----Rampe: * Gumijasta obloga na zložljivih rampah za vožnjo * Hidravlično zložljive rampe z hidravlično nastavljivim vrhom, približno 4.650 x 720 mm * Hidravlična stranska premika rampe in ventili za zadrževanje tovora ----Zadnji opornik: * Hidravlični zadnji opornik ----Razširitev: * 8 parov pocinkanih zložljivih podaljškov za 3 metre skupne širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu ----Nosilec za roko bagra: * hidravlična enota za razdelitev pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 - največ 120 l/min) ----Mere za nakladanje: * zadnja nakladalna površina: približno 6.780 x 2.520 mm (vključno z rampo za vožnjo 860 mm) * nakladalna površina nad vrtljivim obročem: približno 2.990 x 2.520 mm ----Višina nakladanja: * približno 890 mm, +/- 20 mm ----Barvanje: * Reflektirajoči obrobni trak na straneh in zadnji strani * Podvozje, vrtljiva platforma, rampe za vožnjo in zložljivi podaljški, vroče pocinkani * Osi, vlečna naprava, zračni rezervoar in vrt

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ... Credpfx Aiswh Hdxjqof

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long Credpfxjpk D I Ae Aiqof * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: rabljeno, največja dovoljena obremenitev: 21.130 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 11/2026, skupna širina: 2.540 mm, skupna višina: 1.980 mm, Oprema: ABS, Kässbohrer SLL 2-axle lowbed with hydraulic steering Highlight: Optionally available for rent as a complete unit together with the pictured truck. Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed semi-trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 traffic red Dimensions & Weights - Overall length: 13,210 mm - Overall width: 2,540 mm - Fifth wheel height (H5): 1,250 mm - Platform height (unladen): 910 mm - Platform height (laden): 300 mm - Platform length: 6,810 mm - Extension: 5,550 mm - Gooseneck length: 3,600 mm - Rear swing door: 2,100 mm - Platform thickness: 200 mm - Wheelbase: 10,530 mm - Axle spacing: 1,360 mm - Unladen weight: approx. 12,873 kg (±3%) - Gross weight (40 / 60 / 80 km/h): 42,000 kg - Total axle load: 24,000 kg - Permissible kingpin load: 18,000 kg (40 / 60 / 80 km/h) ---Running Gear & Axles - 2 axles - 2 hydraulically steered axles - Axles: BPW - Suspension: Air suspension - Suspension stroke: 260 mm (190 mm / -70 mm) - Additional raising of driving level by 40 mm possible - Load gauge for axle load display - Semi-automatic axle centering with warning light sensor ---Brake System - WABCO EBS 2S/2M - ABS (Anti-lock Braking System) - RSS (Roll Stability Support) - Brake system in accordance with UN ECE R13 ---Electrics & Lighting - 24 V LED lighting system - 2 × 7-pin + 1 × 15-pin socket - LED brake lights - LED rear and fog tail lights - Electrical system in accordance with UN ECE R48 & ADR - Rear LED work lights (2 pieces, reverse gear dependent) - Rotating LED beacon (1 piece) ---Tyres & Rims - Tyre size: 245/70 R17.5 - Tyres: M+S - 3PMSF (winter suitable) - Tyre pressure monitoring system according to R141 - Number of wheels: 9 complete wheels - Rims: Steel rims (Kässbohrer choice) - Spare wheel holder: 1 piece on gooseneck ---Steering & Controls - Hydraulic steering on both axles - Control panel in vehicle - Remote control for external steering control - Multifunctional WABCO Smartboard - Axle load indicator - Suspension control - Tyre & brake wear monitoring - Breakdown & system monitoring ---Chassis & Frame - High-strength steel S700 MC (ISO 1726) Credoycnbaopfx Aiqof - Welded bogie bed connection - Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck - Adjustable and detachable gooseneck - 1 × 2 hydraulic cylinders, 220 bar operating pressure - Kingpin: 2 inch, bolted - Kingpin position: single ---Platform & Superstructure - 3 removable platforms with hardwood flooring - Each platform: 100 × 1,300 × 2,115 mm - Weight per platform: 225 kg - 2 × lashing rings per platform, each with 8,000 kg lashing capacity - Platform widening: 225 mm, galvanized - Extension clamps: 12 × 2 pieces, galvanized ---Load Securing Lashing rings: - 1 × 2 pieces 13.4 t on gooseneck - 7 × 2 pieces 13.4 t - 4 × 2 pieces 8 t in lowbed - 2 × 2 pieces 13.4 t - 3 × 2 pieces 8 t on rear platform Stake pockets: - 6 × 2 pieces in pool (50 × 100 mm) - 3 × 2 pieces at rear (50 × 100 mm) ---Accessories & Equipment - Aluminium front panel gooseneck: 360 × 1,550 mm - Aluminium side panels: 360 × 1,900 mm - Aluminium rear panel: 360 × 2,480 mm - Toolboxes right & left (500 × 350 × 400 mm) - Central lubrication system - Side underrun protection as per ECE R73 - Warning...

Stanje: novo, lastna masa: 3.120 kg, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, per ramp approx. 2,700 mm long x 900 mm wide, ramps with grating, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 lashing eyes each 6 t, steel side panels, foldable and removable, 50 mm wooden planks, loading area tapered at the rear, internal loading width 2,480 mm, removable rear stake, open at the front for through-loading, also available with 5,300 mm load area length! Rental price from €500, -- Errors, misprints and alterations excepted, sample images -- More data on request!, More details:! Cedszrhkrjpfx Aiqorf