Faymonville 5-Achs-Tele-Semi M. Hydr. Rampen nakup rabljenega (60.406)

Stanje: novo, največja dovoljena obremenitev: 36.360 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Neck (Gooseneck): * Gooseneck with front corners tapered approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square profile climbing strips approx. 15 x 15 mm as well as lower-width extensions * Between the first and second axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) – max. point load 5 t/each * Recess in the bevel as well as projecting into the loading area for excavator dipper stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cutouts in the outer frame of the loading area for fastening ratchet straps (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm hardwood covering * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final painting with 2 coats of 2-component topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL 841GL system * Rims in silver grey Including the following additional equipment: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Rear electro-hydraulic unit, under the loading area * On the gooseneck, aluminium side and rear plug-in walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the tapered gooseneck * 2 pairs of WADER container pockets in the loading area for one 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * 3 additional pairs of removable, galvanized covers over the wheel recess – max. point load 3.5 t/pc Lrodpfx Apsyhkq Us Djn * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hang-in intermediate table, approx. 300 mm wide * Interm

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Ledpfx Apeyhkrre Dern Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Ljdjyhkqzepfx Ap Dern Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: novo, največja dovoljena obremenitev: 91.640 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook connection front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 430 mm, beam width: approx. 1,350 mm * Load height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical pin-lug coupling for attaching a lowbed at the front, end traverse at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) guaranteeing optimal corrosion protection * Final coating with 2 coats of 2K paint, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU sideboards and tailboard, approx. 400 mm high, anodized, for installation on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication for a 3-axle chassis * One 7-pin socket left and right at the rear of the front bogie for warning plates * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * The steel mats can be inserted in 2 positions to create a lowered loading area. Please refer to the respective load diagram for the load capacity, depending on extension width * Steel mats with rubber covering approx. 12 mm thick * One 7-pin socket left and right, front and rear on the rear bogie for warning plates * BEKA-MAX central lubrication for a 5-axle chassis * Rear bogie with socket for cable remote control for steering * Rear bogie with trough Ledpfouvbdtox Ap Djrn * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm Lredpfx Apetx Nwno Djn * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 Lsdew Tpq Depfx Ap Dorn - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Area * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood floor approx. 48 mm thick, chequered plate overlay above axles * Cut-outs in the loading area outer frame for attaching tension belts (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5, load index (146/146 F) * Make of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (approx. 50 t tested capacity) Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paint finish: First class and durable corrosion protection * High-quality two-component (2K) single-colour top coat in RAL 3002 carmine red. * Rear section metallised and painted in RAL 9010 (pure white) Steel construction: Lrsdpfx Apow Tprzj Djn Steel structure made of high-strength fine-grained steels. * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Hot-dip galvanised steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanised front terminal strip * Spare wheel carrier in front of the bulkhead * Electro-hydraulic power unit * Remote steering front and rear via cable remote control with push buttons, includes axle tracking control (without installation in tractor unit) * Recess at the rear of the gooseneck for aluminium approach ramps * Anchor rail for aluminium approach ramps at the rear of the vehicle * Galvanised folding supports under the loading area rear chamfer * Aluminium drop sides and rear board on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H) * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * One galvanised toolbox integrated in the chamfered gooseneck * 4 pairs of WADER container locks in the loading area for a 20', 2x 20', 40' or 45' container * 8 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the loading area outer frame * Galvanised extensions, extendable by approx. 230 mm per side * Sliding anchor rails for aluminium approach ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard NLGI-2 grease and removable pump protection * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation), complete steel structure shot-peened to SA2.5–SA3, then wit

Stanje: rabljeno, največja dovoljena obremenitev: 29.560 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, skupna širina: 255 mm, skupna višina: 900 mm, Leto izdelave: 2008, Oprema: ABS, Ta lep Faymonville polpriklopnik sicer potrebuje novo barvo, vendar ima že opravljen tehnični pregled. Opremljen je z dvigalno ploščadjo in zložljivimi, hidravlično nastavljivimi rampami, ki jih je možno tudi bočno premikati. S 3-osno SAF osjo in z vitlom je takoj pripravljen za uporabo. Lodpsymvuiofx Ap Dern

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2020, barva: rdeča, Leto izdelave: 2020, Oprema: ABS, Rear axle 1: Dual tires Rear axle 2: Dual tires; Steering axle Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWBED TRAILER 2x SAF axles 1x steering axle (trailing) Ljdpfx Asx Upxxep Dsrn Tire size Extendable loading platform Length 680 cm + 420 cm extendable, total platform length 1,100 cm Platform width 254 cm Platform height approx. 86 cm Gooseneck length 330 cm Lashing eyes, stake pockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowbed trailer built in 2016, but sold as new in 2020 We speak German Hablamos Español We speak English

Stanje: rabljeno, številka stroja/vozila: YAFTL312000012613, konfiguracija osi: 3 osi, prva registracija: 01/2012, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.300 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2012, = Additional Options and Accessories = - Drum brakes = Remarks = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Lredpfxox U D Als Ap Dsn Length over axles: 900 cm Platform length: 900 cm Gooseneck length: 360 cm Maximum width: 290 cm (250+20+20) Extendable: × = Further Information = Axle configuration Tire size: 245/70 R17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tires; Tire tread left inside: 40%; Tire tread right inside: 25% Middle axle: Twin tires; Tire tread left inside: 50%; Tire tread right inside: 40% Rear axle: Twin tires; Tire tread left inside: 15%; Tire tread right inside: 25% Weights Unladen weight: 11,000 kg Payload: 37,000 kg Gross vehicle weight: 48,000 kg Identification Registration number: C340521 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, številka stroja/vozila: YAMT14XX5K0104637, konfiguracija osi: 3 osi, prva registracija: 01/2020, skupna dolžina: 14.100 mm, skupna širina: 2.550 mm, skupna višina: 3.350 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: drugo, Leto izdelave: 2020, Chassis Chassis height: 90 cm Kingpin diameter / fifth wheel: 2 inch Structure Deck height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Axle spacing length: 90 cm Loading platform length: 930 cm Ramp length: 405 cm Gooseneck length: 430 cm Maximum width: 305 cm (20 cm + 20 cm) Maximum length: 930 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: SAF Brakes: drum brakes Suspension: air suspension Axle 1: twin tyres; lift axle; left outer tyre tread: 15%; right outer tyre tread: 80% Axle 2: twin tyres; left outer tyre tread: 60%; right outer tyre tread: 50% Lrjdpfxju H D Taj Ap Don Axle 3: twin tyres; steering; left outer tyre tread: 70%; right outer tyre tread: 70% Axle 4: twin tyres; steering; left outer tyre tread: 75%; right outer tyre tread: 65% Weights Unladen weight: 11,480 kg Payload: 49,320 kg GVW: 60,800 kg Features Body manufacturer: Faymonville Loading platform height: 90 cm Identification Registration number: C525073 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: novo, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Višina nakladalne površine obremenjena cca 940 mm, 20 x pritrdilnih obročev po 6 t, 20 x pritrdilnih oklepajev po 6 t, 18 x pritrdilnih lukenj, 7 x žepov za stebre na sredini, 14 x žepov za stebre v zunanjem okviru, 2 para zapiral za kontejnerje, doplačilo za sprednjo steno cca 1.600 mm visoko, snemljivo Cena: 1.500 €, doplačilo za izvlečno vlečno kljuko Cena: 1.000 €, doplačilo za 4 opozorilne table z osvetlitvijo Cena: 800 €, na voljo tudi z dolžino nakladalne površine 8.600 mm, 9.000 mm ali 10.000 mm!, -- Pridržujemo si pravico do tiskarskih napak, sprememb in zamenjav, slikovni primeri --, Več podatkov na zahtevo! Ljdpfx Apszgfuko Djrn

Stanje: novo, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, vzmetenje: drugo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Bed height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,600 mm long x 900 mm wide), 10 lashing rings (2 t) on the outer frame, 8 lashing boxes (5 t) in the corners, gearbox support winch with load and quick mode, front, 2 folding supports, rear, chassis and superstructure hot-dip galvanized, extra charge for resting cradle for milling conveyor €600, also available from stock with mechanical ramps!, -- subject to errors, mistakes and changes, sample images --, More details at: ! Lrjdpfozfv Npsx Ap Dsn

Stanje: novo, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 20 lashing rings, loading ramps (approx. 3,100 x 750 mm), serrated climbing strips on the outer sides of the ramps and rear slope, laterally adjustable loading ramps, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators, Surcharges for: Front wall steel, galvanized: €500 Hydraulic sliding ramps = Price: €1,000 -- Subject to typographical errors, mistakes, and changes. Example pictures. -- More data at: ! Ledpfx Apozfv Hzj Dorn More details: !

Stanje: novo, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, vzmetenje: drugo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Bed height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,600 mm long x 900 mm wide), 10 lashing rings (2 t) on the outer frame, 8 lashing boxes (5 t) in the corners, gearbox support winch with load and quick mode, front, 2 folding supports, rear, chassis and superstructure hot-dip galvanized, extra charge for resting cradle for milling conveyor €600, also available from stock with mechanical ramps!, -- subject to errors, mistakes and changes, sample images --, More details at: ! Ljdpfezfpx Rsx Ap Dorn

Stanje: novo, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 20 lashing rings, loading ramps (approx. 3,100 x 750 mm), serrated climbing strips on the outer sides of the ramps and rear slope, laterally adjustable loading ramps, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators, Surcharges for: Front wall steel, galvanized: €500 Hydraulic sliding ramps = Price: €1,000 -- Subject to typographical errors, mistakes, and changes. Example pictures. -- Ledpfx Apszfgwke Djrn More data at: ! More details: !

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 93 kW (126,44 KM), vrsta goriva: dizel, barva: rdeča, skupna masa: 16.350 kg, dvižna moč: 5 kg/m, stanje pnevmatik: 80 odstotek, Leto izdelave: 2013, obratovalne ure: 2.454 h, številka stroja/vozila: 262, Oprema: UVV varnostni pregled, dodatne luči, kabina, klimatska naprava, nastavljiva roka, pogon na vsa štiri kolesa, spojka prikolice, vilice za palete, žerjav, RTH 5.21 Roto teleskopski nakladač 21 m / 5 t Stroj ali najemni stroj Odlično stanje - obnovljen - nov UVV! Vključuje daljinsko upravljanje in vilice za nakladanje Doplačila za priključke: - 1.000 litrska žlica za 1.000 € - Delovna košara nova, letnik 2024 za 9.000 € - Vitel s kapaciteto 5 ton za 5.000 € Ledpfx Aezdtmiep Dsrn Ponudbena cena brez priključkov Vse cene brez DDV, iz Eltmanna, spremembe, napake in vmesna prodaja pridržane

Stanje: novo, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45 R19,5 160J, velikost zadnje pnevmatike: 445/45 R19,5 160J, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Široke pnevmatike, nakladalna višina obremenjena pribl. 1.080 mm, 20 x pritrdilnih obročkov po 6 t, 20 x pritrdilnih kljuk po 6 t, 18 x pritrdilnih lukenj, 7 x sredinskih žepov za kolje, 14 x žepov za kolje v zunanjem okviru, 2 para kontejnerskih zapiral, doplačilo za sprednjo steno pribl. 1.600 mm visoko, snemljivo Cena: 1.500 €, doplačilo za izvlečno vlečno kljuko Cena: 1.000 €, doplačilo za 4 x opozorilne table z osvetlitvijo Cena: 800 €, Na voljo tudi z nakladalno dolžino 8.600 mm, 9.000 mm ali 10.000 mm! -- Pridržujemo si pravico do napak v tisku, napak in sprememb, slike so vzorčne! Več podatkov na: ! Več informacij: ! Ledezd Drijpfx Ap Dorn

Stanje: rabljeno, lastna masa: 3.450 kg, največja dovoljena obremenitev: 7.050 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2021, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.460 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R17,5, velikost zadnje pnevmatike: 235/75 R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Jeklena tla, hidravlične rampe, pritrdilne zanke, -- Pridržujemo si pravico do tiskarskih napak, sprememb in drugačnih informacij, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Lredezddhlepfx Ap Don

Stanje: rabljeno, lastna masa: 1.920 kg, največja dovoljena obremenitev: 5.580 kg, skupna masa: 7.500 kg, prva registracija: 07/2004, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 4.045 mm, širina tovornega prostora: 2.001 mm, prostornina tovornega prostora: 5 m³, vzmetenje: drugo, velikost pnevmatike: 215 / 75 R17,5, barva: siv, vrsta prenosa: drugo, velikost sprednje pnevmatike: 215 / 75 R17,5, velikost zadnje pnevmatike: 215 / 75 R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, Blomenroehr 2-osni tandem priklopnik * 2x rampe, po širini nastavljive / VZMETNO OBREMENJENE * Širina rampe 0,57 m * Dolžina rampe 2,20 m * BPW osi * Nastavljiva vlečna gred * Pnevmatike: 215/75 R17.5 * Medosna razdalja: 0,99 m * Podporne noge na rampah * 4x pritrdilna ušesa NOVO DNO, različni NOVI DELI!!!! * Teže: DGV - 7.500 kg, lastna teža - 1.920 kg, nosilnost - 5.580 kg * Notranje mere: D - 4,045 m, Š - 2,00 m, NAKLADALNI ROB: 0,65 m * NEMŠKO VOZILO / NEMŠKI DOKUMENTI Številka šasije: W095532084EB34190 Tehnični pregled: do 12/26 Lredozfp N Nspfx Ap Djn Vmesna prodaja, napake in spremembe pridržane! Na slikah so logotipi podjetja delno odstranjeni – prosimo povprašajte! Delovanje dodatne opreme brez garancije! Vaša kontaktna oseba: Marcel Schwämmle Tel. + WhatsApp:

Stanje: rabljeno, skupna masa: 133.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2023, Oprema: ABS, Trailer - Vehicle Identification Number: XNJ55H5XX23H01262 - First registration: 29.11.2023 DOLLY - Vehicle Identification Number: XNJ33H5XD23H01262 - First registration: 29.11.2023 POWER HYDRAULICS with NATO socket – or machine hydraulics German registration Unladen weight: Trailer: 27,140 kg | DOLLY: 13,200 kg Fifth wheel height: 1,350 mm – Replaceable kingpin – 3.5" Front swing clearance approx. 1,732 mm ---- Hydraulic, detachable and height-adjustable swan neck – Length 4,020 mm Lowbed: Length: 8,000 mm Width: 2,870 mm – Loading height: approx. 560 mm TELESCOPIC extension by 5,800 mm EXPANDABLE up to 3,240 mm Chassis frame: Length: 7,410 mm Width: 2,750 mm – Loading height: approx. 1,100 mm Total length with dolly: 24,622 mm / without dolly: 20,140 mm Excavator trough - dipper stick recess Central lubrication system BROSHUIS axles – PENDLE AXLES with drum brakes with radio remote control 5 x hydraulically suspended and forced-steered axles Axle loads: 5 x 12,000 kg Maximum fifth wheel load: 25,000 kg Tyres: 285/70 R 19.5 – Tread depth approx. 10 mm throughout Matching 3-axle DOLLY Hydraulically suspended axles Ledpox Ialvsfx Ap Dsrn Modifications, prior sale, and errors expressly reserved. The description serves for general vehicle identification and does not constitute a guarantee in the legal sense. The contractual vehicle specification is binding. Our offer is generally without new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or decals. Our general terms of delivery and payment apply.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 12.800 kg, največja dovoljena obremenitev: 44.200 kg, skupna masa: 57.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje vozilo Fliegl v skladu z vašimi zahtevami. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojeni posameznim željam kupca. Podvozje: polpriklopnik z nizkim ležiščem Jeklena varjena konstrukcija, sedlasta plošča z zamenljivim drugim zatičem kralja in dvema pozicijama za drugi zatič 24 t dvostopenjski podporni vitel, enostransko upravljanje Zložljiva zadnja opora 2 zagozdi za podvozje s pritrdilcem Stranska zaščita proti naletu iz aluminija 1 plastična orodjarna s polico, b =620/h =360/t =440 mm, z možnostjo zaklepanja s ključavnico Razširitve izvlečne do 3.000 mm Predal za lesene deske na labodjem vratu, spredaj prečno Lesene deske 70 mm za razširitev na 3.000 mm Teleskopski sistem Centralni cevni okvir iz natančno zvarjenih, teleskopsko prekrivajočih se delov okvirja izvlečno do maks. 6.000 mm in z možnostjo fiksacije na vsakih 1.000 mm Zavarovanje s pomočjo mehanskega zatičnega sistema s pomično mizo Pritrdilne ušice za nizkopodna vozila 2 para obročastih priveznih ušes, po 5 t, spredaj na labodjem vratu, 11 parov priveznih nastavkov zgoraj in ob strani v zunanjem okviru, vsak po 10 t, 2x na labodjem vratu, 9x na površini nizkega ležišča, prva privezna točka 250 mm od spredaj in zadnja največ 250 mm od zadaj, razdalja med ušesi ne več kot 1.100 mm 8 parov žepov za kolike, vdelanih v zunanji okvir, notranja mera 70 x 40 mm (prilagodljivi za 5 t obročasta ušesa, ni vključeno v dobavo) 3 para zložljivih priveznih ušes, dodatno vgrajenih v območju nizkega ležišča, vsak po 10 t: 1x začetek nizkega ležišča, 1x pred 1. osjo in 1x za 3. osjo Preme in vzmetenje Lredoi Ri Hnopfx Ap Den SAF bobnaste zavore Premične/šasija lasersko merjena za zmanjšanje obrabe pnevmatik in porabe goriva Zadnji dve premi vodeni, z avtomatsko blokado vzvratne vožnje prek vzvratnih luči in ročno blokado z gumbom na vozilu Zračno vzmetenje z ventilom za dvig/spust Kolesa in pnevmatike 235/75 R 17,5, znamka Fulda Jeklena platišča v dvojni postavitvi, tovarniško srebrna Zavorni sistem Dvovodni zračni zavorni sistem Vzmetna parkirna zavora Sistem stabilnosti vozila Prikaz nosilnosti osi preko EBS-Canbus signala, za prikaz na zaslonu v kabini tovornjaka, tovornjak mora biti temu prilagojen, brez LKW instalacije (brez overjene tehtnice) 2 proti zamenjavi odporna priključna spoja spredaj, brez povezovalnih cevi EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Opozorilo: Priklopno vozilo lahko vlečejo le vlečna vozila, ki zagotavljajo delovanje ABS! Elektrika 24 V, večkomorni žarometi, stransko rumena LED osvetlitev 2 bela pozicijska žarometa spredaj 2 bela/rdeča označevalna žarometa zadaj 1 LED rotacijska luč z nosilcem, upravljana prek pozicijskih luči (luč snemljiva) 2 para opozorilnih plošč, dvojno LED osvetljene in izvlečne do 3.000 mm 2x 7-polni proti zamenjavi odporni vtičnici spredaj, brez povezovalnega kabla Talna obloga Labodji vrat s prevleko iz jekla/protizdrsne pločevine Skladiščni prostor v naklonu labodjega vratu nato z 70 mm mehkim lesenim podom, v območju kolesnih vodil jekleni/protizdrsni sloj Zadnji naklon s 70 mm mehkim lesenim podom Stranske stene 25 mm aluminijasti votli profil, 400 mm visoke, spredaj in ob strani na labodjem vratu, snemljive Nakladalne rampe Jeklene rampe, dolžine 2.800 mm, širine 750 mm, bočno pomične prevlečene z lesom Hidravlično prek priklopa na pomožni pogon vlačilca z dušilnikom Hidravlični priključek s SVK spojko NW 10/3, brez povezovalnih cevi Navodila za upora

Stanje: rabljeno, lastna masa: 10.280 kg, največja dovoljena obremenitev: 29.720 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2022, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 880 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v tranzitu, 4-osna prikolica, BPW osi, vrtljiva gred, zračno vzmetenje, možnost dviganja in spuščanja, ABS (antiblokirni sistem), razširljivo do 3 m, pritrditvene ušeske, hidravlične rampe, zadnje podporne noge, stranska aluminijasta zaščita proti naletu, dvojne pnevmatike, zaboj za orodje, kolesne vdolbine. Ledezgdvgopfx Ap Dern Nadgradnja: 4-osna nizkopodno prikolica s kolesnimi vdolbinami, izvlečna razširitev in hidravlične nakladalne rampe. 4x 10 t BPW osi, bobnaste zavore, 4. os vodena, upognjena vlečna kljuka s 50 mm ušesom, kolesne vdolbine za vozila s kolesno bazo od 2.500 do 3.200 mm, bagerska vdolbina 1.990 mm dolga, 660 mm široka, razširljiva do 3 m vključno s kolesnimi vdolbinami, hidravlične nakladalne rampe nastavljive med 3.000 mm in 440 mm notranje širine, nakladalna dolžina zgornjega platoja približno 2.800 mm za 10" kontejner, spodnja nakladalna dolžina približno 6.250 mm za 20" kontejner, nakladalna višina obremenjene prikolice približno 880 mm, hidravlična zadnja podpora, pod iz 50 mm macesnovega lesa, 7 parov težko nosilnih priveznih obročev po 10 t (2x na platoju, 5x v ležišču), popolna tovarniška oprema in načrt na voljo. Vse navedbe so brez garancije, ker je vozilo v tranzitu! Podatki o opremi brez garancije, pridržujemo si pravico do sprememb, predhodne prodaje in napak!

Stanje: rabljeno, največja dovoljena obremenitev: 25.120 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2020, dolžina tovornega prostora: 13.110 mm, širina tovornega prostora: 2.350 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Postelja za nakladanje: 8960 mm, razširljiva do 3000 mm, nagib zadaj: 600 mm, labodji vrat: 3550 mm, jeklene stranice 470 mm, shranjevalna škatla na labodjem vratu, višinska razlika labodji vrat - postelja: 270 mm, višina nakladalne postelje: cca. 930 mm, hidravlične nakladalne rampe, bočno pomične (DxŠ) 2800x750 mm, električna hidravlična črpalka, hidravlični sistem hitrih spojk, 6 x težko-nosilni pritrdilni obroči na stran, "OMS" podporne noge, izvlečne opozorilne table, ABS, EBS, Haldex sistem EB+ GEN3, "AXL" os(i), zavorni bobni, zračno vzmetenje z možnostjo dviganja in spuščanja, LED osvetlitev, vozilo lahko vsebuje reklame in/ali napise SI87033 Naša ponudba je načeloma brez novega tehničnega pregleda (TÜV). Če želite nov tehnični pregled, vam lahko pripravimo ponudbo pri naših partnerskih delavnicah! Vozilo lahko vsebuje reklame in/ali napise. Veljajo naši splošni pogoji dobave in plačila. Lredpfx Apszd Itde Dsn Z veseljem vam pripravimo financiranje ali leasing za ta objekt. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 19.080 kg, skupna masa: 28.480 kg, konfiguracija osi: 2 osi, prva registracija: 08/2025, naslednji pregled (TÜV): 08/2026, POZOR: upravljati samo s kipo hidravliko! BPW 10t osi, 2 krmiljeni osi, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, hidravlično 1400x700 + ročno 700, Lrsdeykgkcepfx Ap Dsn