Faymonville 5-Achs-Tele-Semi M. Hydr. Rampen nakup rabljenega (60.411)

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: Lrsdpsl Tihujfx Ap Den * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: Ljdpfx Apol Tnvgo Djrn * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 28.600 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Zavora: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Nujno sproščanje za valj z vzmetno silo * Kolutne zavore 22,5" * Položajna zavora s skrajšanimi zadnjimi blatniki in ročnim stikalom za zaključek ----Premi: * 3 x 9 t BPW ali SAF – premi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem med dvigovanjem kesona (za povečanje stabilnosti, možno izključiti pri prekrivanju stropov) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna priključna vtičnica za priklop * Eco-LED II osvetlitev s streho za zaščito * 1 x dodatna LED delovna luč * Utripajoče bočne označevalne luči ----Splošna dodatna oprema: * Aluminijasti zračni rezervoar * Teleskopske jeklene nosilne noge s ploščatimi podstavki (možno spustiti le pri praznem vozilu) * 4 m aluminijasta lestev, pritrjena desno ob blatniku * Zaprti plastični posamezni blatniki * Preklopna bočna zaščita pod vozilom * Vlečna kljuka zadaj * Zložljiva vstopna lestev spredaj levo * Škatla za dokumente na čelni steni ----Okvir: * Visok podvozni okvir iz visoko trdnega finezrnatega jekla z Meiller torzijskimi prečniki ----Kiparska nadgradnja: * Polkrožna zadnja kiper korita iz jekla STEELECT 450 -HBW 450- * Čelna stena s 600 mm streho kot nosilec ponjave * Bočne stene z močno -v celoti potekajočo- navznoter nagnjeno zgornjo ojačitvijo ----Debelina dna, stranic, čelne in zadnje stene: * Čelna, bočni in zadnja stena 4 mm * Čelna in zadnja stena nagnjeni * Tailored dno 5/6 mm ----Hidravlični cilinder: Lredpfxoxxf Tqe Ap Djn * Prednji hidravlični cilinder s srednjim delovnim tlakom ----Hidravlična zadnja stena: * Prilegajoča in nihajoča hidravlična zadnja stena. Upravljanje zadnje stene preko mehanske krogelne pipe ----Ponjava: * Električna drsna ponjava -RAL 9006 bela aluminijasta- z ročnim stikalom na podvozju in daljinskim upravljalnikom ----Nakladalna prostornina: * pribl. 25 m³ ----Višina priklopa: * naložen pribl. 1.350 mm * obremenjen pribl. 1.340 mm ----Barva: * Barvanje podvozja v RAL 7021 črno-siva * Kiper nadgradnja v RAL 9006 bela aluminijasta ----Splošne informacije: * --Tehnično dovoljeno skupno težo 39.000 kg-- * Napake in vmesna prodaja pridržane * Novo vozilo z garancijo proizvajalca ----Rok dobave: * dobava od 37. tedna 2026

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve Lrodpoxptn Dofx Ap Don ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: novo, največja dovoljena obremenitev: 26.840 kg, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axles: * 2 x 9 t BPW axles * Lifting axle with start-up aid * Reinforced single-leaf torsion bar suspension ----Suspension: * Air suspension with automatic lowering function during tipping operations (to increase stability, can be switched off for pavers) ----Electrics / Lighting: * SmartBoard (raise and lower, lowering the lifting axle, start-up aid, odometer, axle load display, ECAS, readout of error memory) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective roof * 1 additional LED work light * Flashing side marker lights * Tire pressure monitoring system (TPMS) ----General Attachments: * Aluminum air tanks * Telescopic steel landing legs with base plate (can only be uncoupled when unladen) * 4 m aluminum access ladder stowed on the right side above the mudguards * Closed individual plastic mudguards * Folding underrun protection * Rear towing eye * Folding access ladder on the front left side * Document box on the front wall ----Chassis: * High chassis frame made of high-strength fine-grain steel ----Tipping Body: * Half-shell steel rear tipper body made of STEELECT 450 steel - HBW 450 * Front wall with 600 mm front roof as tarp support * Side walls with stable, all-around, inward-sloping top rail * Front and rear walls angled ----Thickness of floor, side walls, front and rear walls: * Floor tailored 5 / 6 mm * Front wall 5 mm * Rear wall 5 mm * Side walls 5 mm ----Hydraulic Ram: * Front hydraulic ram with medium working pressure Ledpow Eg Eqjfx Ap Dern ----Hydraulic Tailgate: * Overlapping hydraulic and swinging tailgate * Control of the hydraulic tailgate via mechanical ball valve ----Tarp: * Electric sliding tarp - RAL 9006 white aluminium - with manual switch on the chassis and radio remote control ----Coupling height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ----Loading volume: * Approx. 25 m³ ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipper body in RAL 9006 white aluminium ----General Info: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 28.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Zavora: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Siliščno odklepanje za vzmetne cilindre * Kolutne zavore 22,5" * Zavorni sistem za finišer s skrajšanimi zadnjimi blatniki in ročnim stikalom za finišer ----Os: * 3 x 9 t BPW ali SAF osi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem med postopkom kipanja (za povečanje stabilnosti, možno izklopiti za stroje za polaganje asfalta) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna vtičnica za prikolice * 5-komorni zadnji žarometi s zaščitno streho * 1 x dodatni LED delovni žaromet * utripajoče stranske označevalne luči ----Splošni dodatki: * Aluminijasti zračni rezervoar * Jost teleskopske jeklene podporne noge s ploščato nogo (mogoče odklopiti le v praznem stanju) * 4 m aluminijaste lestve, nameščene desno ob strani nad blatniki * zaprti plastični posamezni blatniki * preklopna zaščita proti podletu * vlečna kljuka zadaj * pregibna lestev za vzpon spredaj levo ob strani * škatla za dokumente na prednji steni ----Okvir: * Šasija iz visoko trdnega finezrnatega jekla s prečkami, tipičnimi za Meiller ----Kiparska nadgradnja: * Polkrožna jeklena zadnja kiper korita * Prednja stena s 600 mm streho kot nosilec ponjave * Stranske stene z robustnim neprekinjenim zgornjim robom, nagnjenim navznoter * Prednja in zadnja stena poševni ----Debelina dna, stranskih sten, prednje in zadnje stene: * Prednja stena 4 mm iz jekla BS 70 * Zadnja loputa 4 mm iz jekla HBW 400 * Stranske stene iz 4 mm jekla HBW 450 * Prilagojeno dno iz 5/6 mm Hardox jekla 450 ----Hidravlični cilinder: * Sprednji hidravlični cilinder z zmernim delovnim tlakom ----Hidravlična zadnja stena: * Ležeča hidravlična in nihajoča zadnja stena. Upravljanje hidravlične zadnje stene prek mehanskega krogelnega ventilskega bloka ----Ponjave: * električna drsna ponjava - RAL 9006 bela aluminij - s stikalom na šasiji in daljinskim upravljalnikom ----Nakladalna prostornina: * cca. 25 m³ ----Višina sedla: Lredpfoxxf Twsx Ap Don * prazno cca. 1.247 mm * naloženo cca. 1.217 mm ----Barva: * Barvanje šasije v RAL 7021 črno sivi * Kiper nadgradnja v RAL 9006 belo aluminij ----Splošne informacije: * --Tehnično dovoljena skupna masa je 39.000 kg-- * Možnost napake in predhodne prodaje * Novo vozilo s tovarniško garancijo ----Dobavni rok: * dobavljivo od 37. tedna / 2026

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty Lredpfx Aerwc R Aep Djn * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: Ledpfx Apey Ngz Hj Dern * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 27.760 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW axles Lsdpfxew Eg Eds Ap Dern * 1st axle liftable with traction aid ----Suspension: * Air suspension with automatic lowering during the tipping process (for increased stability; can be deactivated for overhead pavers) ----Electrics / Lighting: * Smart-Board (lift and lowering system, lifting axle lowering, traction aid, odometer, axle load indicator, ECAS, error memory reading) * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective cover * 1 x additional LED work lamp * Flashing side marker lights ----General attachments: * Aluminium air tanks * Telescopic steel landing legs with plate foot (can only be unhitched when empty) * Enclosed plastic single mudguards * 4 m aluminium access ladder, stored on the right side over the mudguards * Folding underrun protection * Rear tow eye ----Chassis: * High chassis frame made of high-tensile fine grain steel, heavy-duty version ----Tipping body: * Semi-round steel rear tipper body, complete, made of STEELECT 450 steel -HBW 450- * Side walls with robust, continuous, inward-angled top belt * Outside access and aluminium platform in front of front wall ----Thickness of floor, side walls, front and rear wall: * Front and rear wall inclined * Front and rear wall 5 mm * Side walls 6 mm * Floor 8 mm, HBW 450 steel ----Hydraulic ram: * Front hydraulic ram with medium working pressure ----Hydraulic tailgate: * Overlapping hydraulic and swinging tailgate * Control of hydraulic tailgate via mechanical ball valve ----Tarpaulin: * Manual roll-up tarpaulin - RAL 9006 white aluminium ----Loading volume: * Approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,340 mm * Laden approx. 1,330 mm ----Paintwork: * Chassis painted RAL 7021 black grey * Tipping body RAL 9006 white aluminium ----General information: * --Technical gross weight of up to 39,000 kg possible-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from week 11/2026

Stanje: novo, največja dovoljena obremenitev: 27.400 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.545 mm, širina tovornega prostora: 2.360 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 55 m³, Leto izdelave: 2025, Brakes: * EBS (Electronic Braking System with Stability Control) * Emergency release system for spring brake cylinders * 430 mm disc brakes ----Axles: * 3 x 9 t SCB axles with lift and lowering system (automatic electronic lowering via EBS) * 1st axle liftable automatically/pneumatically ----Electrics / Lighting: * Trailer Info System * TrailerConnect control unit incl. battery with data storage for 12 months * Tire pressure monitoring system * Electronic start assist * 2 x 7-pin and 1 x 15-pin trailer sockets * LED lighting with dynamic indicators * 2 additional LED reversing lights * 2 LED work lights mounted laterally near landing legs (switchable from truck cab - without truck-side installation) ----General Attachments: * Aluminum air tanks * Jost landing gears * Collapsible underrun protection * Lateral impact protection * Rear tow eye * Closed individual plastic mudguards * 4.0 m aluminum access ladder stored laterally above the mudguards * Plastic toolbox in front * Loading pressure gauge * Access and standing platform at the front of the chassis with shovel and broom holder * Folding "A" sign at rear ----Chassis: * Extra light, weight-optimized chassis frame in new design – welded from high-tensile fine-grained steel ----Tipper Body: * Half-shell steel rear tipping body * Hyva 250 bar front hydraulic cylinder * Sloped front wall * Side walls made of 4 mm SCB 450 steel with central ribs * Floor made of 5 mm SCB 450 steel * Double wing doors (1/1) with rubber seal and 1 locking rod ----Rolling Tarp: * Straight tarpaulin frame with 1 transverse bow, 90° swiveling, removable and telescopic * 4 tarp fastenings with tension belts and ratchet * Rolling tarp in RAL 9006 silver metallic * Chassis hot-dip galvanized ----Fifth Wheel Height: * Unladen approx. 1,180 mm * Laden approx. 1,150 mm ----Paintwork: * Body color RAL 9010 pure white * Axles, wheel hubs, landing legs painted in a shade of black ----Information: * Technically possible gross vehicle weight of 39,000 kg * New vehicle without initial registration with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf at the A7 Lsdpfx Aswr Sqlop Djrn

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: Lrodpfxopk D I Aj Ap Dsn * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps Lodpfx Ajwh Hdxsp Dern * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2020, dolžina tovornega prostora: 5.750 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 900 mm, medosna razdalja: 1.000 mm, vrsta prenosa: drugo, voznikova kabina: drugo, zavore: drugo, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and split loading platform * Front section with mesh extension, electrically tiltable on both sides * Behind: flatbed/platform/low loader with loading ramps * Large flatbed loading area with phenolic plywood floor and DIN lashing eyes * Ideal for landscaping, construction industry, and much more * Loading area dimensions: 3.75 m x 2.15 m x 0.35 m, aluminium loading side panels * Payload: 2,230 kg * Tipping area dimensions: 2.00 m x 2.15 m x 0.90 m * Electric tipping drive with cable remote control * 100 km/h approval * Tipper bed with steel floor * Tridem axles * GVW: 3,500 kg * Unladen weight: 1,270 kg * Payload: 2,230 kg Lrodpfx Apsxnqv As Dsn If a new TÜV inspection is required, we will be pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that there are no misunderstandings regarding their condition and suitability. Inspection and viewing are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for mistakes or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2019, skupna dolžina: 13.800 mm, skupna širina: 2.750 mm, skupna višina: 3.200 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2019, Oprema: ABS, = Dodatne možnosti in oprema = - Dvižna os - Krmiljena os = Opombe = Šasija Premer priklopnega zatiča / sedla: 2 inča Višina priklopnega zatiča / oje: 120 cm Bobnaste zavore: ✓ Posebni transport Dvodelne cestne plošče: ✓ Hidravlične rampe: ✓ Dolžina nakladalne površine: 920 cm (1420 cm iztegnjeno) Nizkopodna prikolica: ✓ Maksimalna širina: 325 cm Maksimalna dolžina: 1420 cm Razširljivo: ✓ Iztegljivo: ✓ = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 245/70 R17,5 Znamka osi: Bpwecoplus Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Prva sprednja os: dvojna montaža; profil pnevmatik levi zunanji: 45%; profil pnevmatik desni zunanji: 45% Druga sprednja os: dvojna montaža; profil pnevmatik levi zunanji: 30%; profil pnevmatik desni zunanji: 55% Sredinska os: dvojna montaža; profil pnevmatik levi zunanji: 25%; profil pnevmatik desni zunanji: 20% Prva zadnja os: dvojna montaža; krmiljena; profil pnevmatik levi zunanji: 45%; profil pnevmatik desni zunanji: 50% Druga zadnja os: dvojna montaža; krmiljena; profil pnevmatik levi zunanji: 35%; profil pnevmatik desni zunanji: 35% Teže Dovoljena skupna masa: 84.000 kg Identifikacija Registrska številka: N2627491 = Podatki o podjetju = Za več informacij o tej enoti pokličite: ali pišite na e-pošto: . Lrodpfxezc Eius Ap Don Celoten pregled zaloge si lahko ogledate na: . Ne pozabite se naročiti na naše novice za tedenske posodobitve o naši zalogi.

Stanje: rabljeno, največja dovoljena obremenitev: 30.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2015, dolžina tovornega prostora: 10.170 mm, širina tovornega prostora: 2.500 mm, skupna širina: 2.520 mm, skupna višina: 3.600 mm, Oprema: ABS, Vroče pocinkano, dolžina nizkega ležišča cca 6520 mm, razširljivo na 3000 mm, višina nakladanja: cca 910 mm, zadnji naklon: 850 mm, visoko ležišče 2800 mm, vlečno oko 50 mm, vdolbina za roko bagra, hidravlične nakladalne rampe stransko pomične (D x Š) mm, 9 x vponk na vsaki strani, 12 x pritrdilnih obročev na vsaki strani, 2 x zložljivi oporni nogi zadaj, spojna glava Duo-Matic, rotacijska opozorilna luč, izvlečne opozorilne table, ABS, EBS, SAF os(i), bobnaste zavore, listnato vzmetenje, vozilo je lahko opremljeno z reklamnimi nalepkami in/ali napisano. SI86936 Naša ponudba je načeloma brez nove tehnične preglede (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko opremljeno z reklamnimi nalepkami in/ali napisano. Veljajo naši splošni dobavni in plačilni pogoji. Lrodpfx Ajy Trwzep Djn Z veseljem vam pripravimo ponudbo za financiranje ali leasing tega objekta. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 27.300 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2013, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 11.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, * Gugalnica z zaboji za shranjevanje * Sledilne krmiljene osi * Hidravlične nakladalne rampe * Razširljiva nizkopodna ploščad ----* Dimenzija pnevmatik: 235/75R17,5 * Tehnična skupna masa: 42.000 kg * Lastna teža: 8.700 kg * Skupna dolžina: 13.150 mm * SP veljavnost do: 02/2027 ----Številka vozila: 12148 ----Možne napake in vmesna prodaja pridržane ----Oglasi in različni napisi so bili digitalno odstranjeni. -----Z veseljem vam pomagamo pri vseh formalnostih, ki nastanejo ob nakupu vozila – sporočite nam vaše želje in predloge ter za vse ostalo bomo poskrbeli mi. Med drugim vam lahko za doplačilo ponudimo naslednje storitve: ----Odkup vašega starega vozila TÜV/SP tehnični pregled Popolna izvozna obdelava Posredovanje financiranja Urejanje izvoznih tablic Prevoz vozil Registracija vozil Reševanje in transport vozil ----VAŠ VTS TEAM Lrodpoza Rliefx Ap Don

Stanje: rabljeno, največja dovoljena obremenitev: 1.920 kg, skupna masa: 4.500 kg, konfiguracija osi: 1 os, prva registracija: 09/2011, dolžina tovornega prostora: 7.230 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, * 8926 – Vehicle ID for telephone inquiries * Type: OS1-L50ZL Lrsdpfx Apsw D Ntne Don * Features: ABS, EBS, BPW axles, drum brakes, air suspension with raise/lower function, landing gear at the front, rear support legs, height-adjustable drawbar, swing doors, lashing rails integrated into the walls, box body lined with felt, spare wheel * Tyres: 215/75R17.5 (tread depth: 6 / 6 / 6 / 7 mm) * Trailer weight limited to 4,500 kg (technically permitted GVW: 5,000 kg) ----Our email address:   Our services for you:    - Procurement of short-term or export license plates    - Transportation / delivery EU-wide    - Customs clearance for vehicles exported to non-EU countries If you have questions in Russian, you can call the following number * WhatsApp for Russian speakers only: * WhatsApp for English, German and other languages:

Stanje: rabljeno, prevoženi kilometri: 168.812 km, moč: 353 kW (479,95 KM), prva registracija: 01/2014, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 07/2026, barva: zlato, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, navigacijski sistem, * 3399 - ID for telephone inquiries * JL body * Automatic transmission, retarder, air conditioning, multifunction steering wheel, center armrest, 2x heated leather comfort seats, electric windows, radio, navigation, tow bar, steering axle, walk-through, full air suspension * Topsleeper, 5 berths, seating area, microwave, refrigerator, hob, bed above shower, 2x TV, shower, toilet, washbasin, overhead storage compartments * For 5 horses, all horses can be unloaded individually, stallion partition, 4 side ramps, ramp limiters, window in the horse area, camera in the horse compartment, roof hatches, saddle and bridle holders, walk-in tack room with ramps and electric winch for saddle cabinet * If you have any questions, feel free to contact us! * We accept trucks, construction machinery etc. in part exchange ----Our email address: Lrsdoygdyaopfx Ap Den Our service for you: - Arrangement of short-term or export license plates - EU-wide delivery/transport - Customs clearance for vehicles exported to non-EU countries If you have questions in Russian, you can call the following number* WhatsApp just for Russian speakers: * WhatsApp for English, German and other languages:

Stanje: rabljeno, moč: 115 kW (156,36 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 17.400 kg, dvižna moč: 5 kg/m, stanje pnevmatik: 100 odstotek, Leto izdelave: 2015, obratovalne ure: 1.300 h, številka stroja/vozila: 550, Oprema: UVV varnostni pregled, dodatne luči, kabina, klimatska naprava, pogon na vsa štiri kolesa, spojka prikolice, vilice za palete, žerjav, DEMO - machine or rental machine Lrjdpfoi Rt Tksx Ap Den includes radio remote control and loading forks Surcharge for attachments

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902037031, lastna masa: 4.795 kg, največja dovoljena obremenitev: 30.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.040 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: siv, These images are archive photos! The vehicle may still be in use! Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin, Curved front closure, patented 24-ton, 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, with thrust compensation Wheel chocks with holders Foldable underrun protection Half-shell fenders Integrated mudguard bracket, stone-repellent finish With anti-spray mud flaps only on the last axle Tarpaulin rod with bracket Tow hook at rear (not included on Revolution model) Axles & Suspension SAF disc brake axles with 430 mm disc diameter "Laser-measured axles/chassis" reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle is an automatic lift axle, including forced lowering and traction aid, operated by "brake 3x" function (traction aid works up to axle overload of 30% and a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Brake system 2-line compressed air braking system Color-coded piping for easier maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting hose 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles equipped to ensure proper ABS function! With raise/lower valve Vehicle stability system Automatic tipping lowering with shut-off valve "TPMS" tire pressure monitoring system – display via towing vehicle, through EBS, not installed in truck (prerequisite: required installation in truck; only monitors base tyres) Wheels & Tires 385/65 R22.5" Lrsdpfsy Rrplox Ap Don Steel rims Electrics 24 Volts, multi-chamber LED lights, side yellow LED lighting, license plate lighting in LED (Note: for certain towing vehicles, error messages may occur despite fully functioning system) Side yellow LED lighting linked to turn signal ("blinking side marker lights") 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Integrated additional LED work light at the rear, switched with reverse light Hydraulics Low-pressure cylinder, max. 170 bar Operation hydraulically via vehicle PTO Body Aluminium box body made of high-grade, abrasion-resistant material. Inclined front wall, 5 mm thick, with external cylinder mounting. Side walls constructed from 30 mm hollow section profiles, neatly welded, with spill-repellent top rail profile. Interior with access steps at front wall (not with Cramaro system). External shovel and broom holders at front wall Greenline – conical, aerodynamic body form "Membrane" tailgate Tailgate as pendulum flap with double-joint hinges, externally mounted, dual hook locking Tailgate with rubber seal Continuous 6 mm thick floor Standing platform with access steps, connector plate for air/electricity/brake with large working space for optimal operability Roll tarpaulin can be stowed on right side, with central locking on the left Operating notes For transport involving salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against material corrosion and rusting.

Stanje: novo, največja dovoljena obremenitev: 34.350 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Lredpfx Apowt Iyle Dsn Partial list of equipment. Full equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with reinforced crossmembers, designed for high floor and point loads, with heavy-duty outer frame * Rear loading floor as steel welded construction, with two welded-in external drive tracks made from 5-hole steel sheet (Lohr/Rolfo hole pattern system), approximately 2,250 mm long, hydraulically lowerable by approx. 350 mm * Rear of the vehicle features an integrated loading platform, extendable by approx. 1,500 mm hydraulically; steel welded construction with 5-hole steel sheet cover (Lohr/Rolfo hole pattern system), integrated lights, two ramp storage compartments, and ramp supports * Rear end drive and control via electrical-hydraulic power pack, mounted in a stainless steel box on the left side of the chassis, with radio remote control * Power supply from the tractor unit’s vehicle battery (NATO socket on the front wall, without connecting cable to the truck) Coupling Device: * 2-inch king pin, replaceable from below Underride Protection: * Fixed installation as per EU regulations Landing Legs: * 2 x 12 t support legs with 2-speed gear Axles: * 3 x 9 t air-suspended axle units * SAF brand with disc brakes approx. 370 x 45 mm * ABS * 10-hole centrally located wheel bolt circle, ET120 * Total air suspension stroke approx. 310 mm, with lift approx. 220 mm and lowering approx. 90 mm * Air suspension control via hand lever with stop function Lifting Axle: * 1st and 3rd axles can be lifted automatically, also manually via control at the chassis frame or via PIN 12 of the light socket Tyres: * 6 units, 445/45R19.5, fitted on 14.00x19.5 rims, 10 holes, ET120 Mudguards: * As per EU standards, 1/4 PVC mudguards * 1st axle front and rear; 2nd and 3rd axles rear Brake System: * Wabco brand * Dual-circuit braking system in accordance with EU regulations, with EBS and automatic load-dependent control * Spring-actuated parking brake active on 2 axles * Reversed coupling heads solidly mounted on front crossmember, no connection line to truck Lighting Equipment: * As per EU standards, 24 Volt * Multi-chamber tail lights * Number plate lights * LED side marker lights * White LED position lights at the front and LED lane marker lights at the rear * 15-pin socket and 2x7-pin sockets firmly attached to the front crossmember, no connecting lines to truck Load Securing: * 9 pairs of foldable lashing rings evenly distributed, traction approx. 8 t * 8 pairs of foldable lashing rings evenly distributed, traction approx. 2.5 t * 2 pairs of foldable lashing rings at the rear, traction approx. 2.5 t * On the outer frame, holes for lashing straps every approx. 500 mm Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Sockets: * 8 per side recessed into the outer frame * 4 rows of sockets transversely across the loading area Floor: * Approx. 28 mm Z-hardwood floor, recessed in outer frame Front Wall: * Solid front wall * Storage for 16 plug-in stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2x PVC toolbox, approx. 600/400/500 mm * Rear rotating beacon holder incl. beacon * 2 LED reversing lights (at rear) * 2 aluminum loading ramps, approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair

Stanje: novo, največja dovoljena obremenitev: 37.350 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment features. Full equipment specification available on request. Chassis: * Welded construction using high-quality steel profiles with through cross-members, designed for high floor and point loads, equipped with heavy-duty outer frame * Rear loading deck as a steel welded construction with two welded-on external driving tracks made of 5-hole steel plate (Lohr/Rolfo pattern) over a length of approx. 2,250 mm, hydraulically lowerable by approx. 350 mm * Integrated at the rear of the vehicle is a hydraulically extendable loading platform (approx. 1,500 mm) as a steel welded construction with 5-hole steel plate (Lohr/Rolfo pattern) cover, lighting mount, and two ramp compartments with ramp supports * Rear operation and control via an electric-hydraulic unit mounted in a stainless steel box on the left side of the chassis, operated by remote control * Power supply via the towing vehicle’s battery * NATO socket on the front wall (no connecting cable to tractor unit) Coupling device: * 2-inch kingpin, replaceable from below Underrun protection: * Fixed installation compliant with EC regulations Landing legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 10 t air suspension axle units, SAF brand with disc brakes approx. 370 x 45 mm, ABS, 10-stud hub-centered ET120 wheel connection, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), air suspension controlled via hand valve with stop function Steering axle: * 3rd axle as trailing steering axle with manual and automatic reverse lock Lifting axle: * 1st axle automatically liftable, additionally switchable via control on chassis frame or via pin 12 of lighting socket Tyres: * 6 units, 445/45R19.5 brand of our choice, mounted on 14.00x19.5 rims, 10-stud ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards before and after the wheels on the 1st axle (front and rear), 2nd and 3rd axles (rear) Spare wheel holder: * None Brake system: * Two-line brake system according to EC with EBS, automatic load-dependent braking * Spring-loaded brake as parking brake acting on 2 axles, anti-swapping couplings fixed on front cross beam, no connecting line to tractor unit, Wabco brand Lighting system: * EC-compliant, 24-volt, multi-chamber rear lights, license plate lights, LED side marker lights, LED front position lights, and LED lane departure lights at rear, 15-pin socket as well as 2x7-pin sockets fixed on front cross beam, no connecting cables to tractor unit Load securing: * 9 pairs of folding lashing rings evenly distributed, tie-down force approx. 8 t * 7 pairs of folding lashing rings evenly distributed, tie-down force approx. 2.5 t * 2 pairs of folding lashing rings at rear, tie-down force approx. 2.5 t * Drilled holes for tension belts in outer frame every approx. 500 mm Stake pockets: * 16 stakes approx. 100/40 mm, usable length approx. 800 mm Stake pocket holders: * Each side 8 pockets integrated into outer frame * 4 rows of transverse stake pockets across the platform Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Front wall: * Solid front wall, stake holder for 16 stakes approx. 100/40 * Front wall bolted to head frame Equipment: Lrodpfxsy Up S So Ap Djn * 2 wheel chocks with holders * 2 PVC toolboxes, approx. 600/400/500 mm * Rear beacon holder including lamp * 2 pcs LED rear ...

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalization unit with 100 mm wide parabolic springs ----Drawbar / Drawtube: * Fixed welded drawtube with low-maintenance ball joint for K80 ball coupling (offset by +77 mm / 33 mm via head plate), with raised bracket for connection lines ----Electrics / Lighting: * 12 V, 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from towing vehicle without installation on towing side ----General attachments: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Hot-dip galvanized two-step access ladder in front of the front wall (on FR left) ----Chassis: * Fine-grain steel chassis ----Tipper body: * Steel Pal.- 3-way tipper body with M-Strong side panels (front wall fixed, continuous side panels - without center stanchions - swinging via manual central locking and mechanically foldable with sideboard spring assistor) * Hydraulic tailgate, 500 mm high, functioning as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7-tonne recessed and foldable lashing point in each corner * 4 x 3-tonne recessed and foldable lashing rings on each side Lodpfx Aer Dpzuop Djrn ----Ramps: * 1 pair of aluminum drive-on ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receiving compartments for aluminum drive-on ramps, recessed from behind into the chassis * Load securing according to EN 12642 XL ----Coupling height: * Laden approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawtube, rear supports, underrun protection hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black shade ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Braking System: * Without ABS/EBS, homologated for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles Lrjdpfx Asr Dpz Hjp Dsn ----Suspension: * Tandem-balance unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: * Rigid, welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via mounting plate) with elevated gallows for connection lines ----Electrics / Lighting: * 12 V 7 + 4-pin power supply cable * LED lighting system, 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical drop legs at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Hot-dip galvanized two-step access steps in front of the bulkhead on the left (FR) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Steel pallet three-way tipper body with M-Strong side boards (fixed front wall, continuous sides without central stanchions, swinging via manual central locking, plus mechanically folding with board spring lifters) * Hydraulic tailgate, 500 mm high, engineered as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t recessed folding lashing ring * Each side fitted with 4 x 3 t recessed folding lashing points ----Ramps: * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber and tracked vehicles * 2 recessed storage compartments for aluminum ramps in the rear of the chassis * Load securing compliant with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs, underrun protection hot-dip galvanized * Axles, air tanks, landing gear (front) * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 13.000 kg, dovoljena osna obremenitev (os 2): 13.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, prva registracija: 07/1983, dolžina tovornega prostora: 11.870 mm, širina tovornega prostora: 2.500 mm, vzmetenje: parabolično listje (vzmet), barva: bela, Leto izdelave: 1983, Polpriklopnik CTC ZA90SRT47 Nizkopodni 11,87 m s hidravličnimi rampami in vitlom (4,10 m + 7,35 m) 3 osi Parabolično vzmetenje Dovoljena skupna masa 47.000 kg – nosilnost 39.000 kg Lodpfx Aoy Axufsp Dsrn Za specialne prevoze, dovoljena skupna masa kompozicije 56.000 kg Neto izvozna cena: 18.000,00 EUR Vse informacije brez garancije/ možnost napake pridržana.