Low loader semitrailer

DINKEL 3-Achs-Jumbotieflader - 2tlg. Rampen

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-Axle Step Frame Platform Semi-Trailer with Fassi F545 Crane Mega Lowliner Chassis Welded construction with cross members, manufactured entirely from high-grade steel Neck height: approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross connections Axles 2 BPW axles, each with 10,000 kg load capacity, fitted with 17.5" drum brakes ABS: 1 axle monitored Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminium rims, 10-hole, hub-centric, offset = 122 mm Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate illumination Credpfx Aen Hrtgjc Tei 2x 7-pin sockets + 1x 15-pin socket wired as per EU standard Floor Galvanised grating floor in the low-bed area Steel chequer plate in axle area Load Securing Outer frame with D030 mm lashing hole profile on the bevel 2x12 lashing points, 8,000 daN in the outer frame 3 rows of combo stake pockets for 80x80 mm insert stakes in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier winch 2x toolboxes with slide-out drawer (for chain storage) Surface Protection Steel structure: blasted and primed Paint Finish Chassis/frame/floor frame: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Approx. 90% lifting capacity towards the front For further information please do not hesitate to contact us.

Stanje: rabljeno, prevoženi kilometri: 266.735 km, moč: 330 kW (448,67 KM), prva registracija: 09/2015, vrsta goriva: dizel, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, skupna višina: 3.900 mm, Oprema: ABS, filter saj, klimatska naprava, žerjav, Mercedes-Benz 2545 Antos vlačilec s PK 41002 žerjavom 6x2 Nosilnost: 12.345 kg Medosna razdalja: 1.-2. os 2,60 m 1.-3. os 3,90 m Palfinger žerjav Tip: PK 41002-EH D 4x hidravlične podporne točke Crsdpfx Acsy N Haij Tei 5x hidravlični izvleki Delovne ure: 1851 h Z različno opremo: - Asistent za speljevanje v klanec - Radio-CD - Drsna streha Z veseljem vas podpiramo tudi pri financiranju/leasingu z našimi partnerji. Vse informacije brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: Csdpfx Acjy Auhue Tsri * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: > 3 osi, Oprema: ABS, Celoten seznam naših vozil, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. Crjdpfx Acsz N Nx Rj Tei GOOSENECK (Vratna prikolica) Gooseneck z zadnjim naklonom približno 750 mm x 10°. 3 pari pritrdilnih obročev (nosilnost 5.000 daN). Tla iz trdega lesa, debeline približno 30 mm. - 2-palčni kraljevski zatič - Na pocinkanem priključnem profilu spredaj rumeno-rdeče zračne spojke. - 4 klini za zavoro z nosilcem na čelni steni (± 5 kg). TOVORNA POVRŠINA 5 parov pritrdilnih obročev, ki se odpirajo navzven (nosilnost 5.000 daN). 3 pari pritrdilnih obročev, ki se odpirajo navzven (nosilnost 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno spredaj na tovorni površini (nosilnost 10.000 daN). Tla iz trdega lesa, debeline približno 48 mm, nad osmijo rebrasta kovinska pločevina. - Na goosenecku in na zadnji strani, levo in desno, po en nosilec za opozorilne table, vključno z vtičnico. - Pocinkana jeklena čelna stena. - 3 višinske lesene plošče - Pocinkani zložljivi nosilci pod naklonom tovorne površine. - Nosilec za rotacijsko luč na zadnji strani prikolice. - Višinsko nastavljiva ponjava, približno 3.960 mm - Pocinkana čelna stena z mehanizmom napenjanja za drsne zavese. Višinsko nastavljivo za približno 400 mm. - Streha blagovne znamke EDSCHA, ki se lahko premika naprej na aluminijastih tirnicah. - Na tovorni površini 3 pari drsnih nosilcev. - Nadgradnja je lahko na zadnji strani, levo in desno, hidravlično razširjena za približno 750 mm (za nakladanje/razkladanje). - Drsna ponjava z visokim portalnim nosilcem. - Drsna ponjava z rezervo dolžine približno 700 mm, z zateznimi trakovi v razmaku približno 600 mm. Višina zgornjega roba nadgradnje približno 3.960 mm (obremenjeno). - Vožnja z odprto drsno ponjavo ni dovoljena in povzroči poškodbe ponjave. - Pritrdilna letev za aluminijaste rampe na zadnji strani vozila. - Upravljalni ventili za hidravlično razširitev nadgradnje, nameščeni na desni strani prikolice. (± 4 kg) - Bela odsevna trak, v skladu z direktivami EU, na strani in zadnji strani rdeče barve. - Elektro-hidravlična enota na zadnji strani pod tovorno površino. (± 45 kg) - Nosilec za par opozorilnih tabel na čelni steni. - Štiri opozorilne table, ki se iztegujejo za približno 400 mm, približno 423 x 423 mm, z LED pozicijsko lučjo (± 25 kg). - Na opozorilnih tablah nosilec za rotacijsko luč. - 7 parov žepov za nosilce na zunanjem okvirju tovorne površine, za nosilce približno 100 x 50 mm (± 21 kg). - Dvigalna os na prednji osi z nadzorom preko sistema TEBS-E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenjenosti (± 69 kg). - 6 parov potopljenih pritrdilnih obročev vzdolž centralnega nosilca (nosilnost 5.000 daN). - 1 par potopljenih pritrdilnih obročev vzdolž centralnega nosilca na zadnji strani (nosilnost 10.000 daN). (± 27 kg) - Na rebrastih pločevinah na goosenecku in na tovorni površini, nanos plasti peska kot protidrsna zaščita. - 1 LED vzvratna luč, levo in desno pred prvo osjo. - 2 LED delovne luči, nameščeni na zadnji plošči. - Akustični opozorilni signal pri vzvratni vožnji. DODATNA OPREMA - Kabel za napajanje elektro-hidravlične enote in/ali električnega vijačnega vleka (približno 35 mm², približno 3,5 m dolg, maks. 250 A) med prikolico in SZM s priključkom (NATO-NATO). PODPORA SEDLA JOST podpora sedla, mehanska, z 2-stopenjskim menjalnikom za približno 24 t nosilnosti (približno 50 t testna nosilnost). PNEVMATIKE Pnevmatike 205/65 R17,5 - proizvajale