Fliegl 3-Achs Jumbo Sattelauflieger Plateau nakup rabljenega (38.664)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT23502035606, lastna masa: 5.325 kg, največja dovoljena obremenitev: 26.675 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.490 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: siv, zavoro prikolice: prikolica s zavoro, The images shown are archive photos; the vehicle may still be in use! Chassis - Tipping Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions King pin installed in the front position Curved front wall "patented" 24t 2-speed landing gear, single-sided operation, with semi-circular base and straight mounting plate, with push/pull equalizer Decoupling under load is not possible; when decoupled, the vehicle must be positioned on a rearward slope. Free rear swing clearance approx. 2100mm in rear position and approx. 2600mm in front position! Wheel chocks with holder Aluminum side underrun protection Foldable rear underrun protection Rear underrun protection with "spring assist" for easier handling Half-shell mudguards Splash flaps behind last axle, asphalt version, hinged to the mudguard, with stowage option on top of the mudguard, mudguard shortened Tarpaulin rod with holder Tow hook at rear (not for Revolution) Axles & Suspension BPW or SAF drum brake axles, at the discretion of the manufacturer Axles in off-road version "Axle/chassis laser alignment" for reduced tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-assist, activation by "brake 3x" (start-assist operative up to 30% axle load exceedance and to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year warranty against rust-through Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without interconnection cable 24 Volt EBS, electronic braking system with EBS socket at front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure effective ABS operation! With raise & lower valve Vehicle stability control system Finisher brake, electrically operable from the truck, without truck installation Automatic tipping lowering with shutoff valve Wheels and Tires 385/65 R22.5" brand at the manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white front position LED lights 2 rear white/red lane marker lights 1 x 15-pin front socket, without connection cable 1 LED headlight with integrated "Osprey" camera as trough camera (technical approval required upon order) Number of LED flashers at the rear, switched via a cab switch, without truck installation, connected to PIN 12 Pin allocation to be specified upon order! Reversing camera system with color flat-screen monitor, wireless connection to the monitor. Monitor with suction-cup mount and power supply via 24V vehicle socket Dcodpfx Aiex Dkpnoajh Registration/Country Plates Germany With Dekra inspection and certificate (acc. §13 EC-FGV) 24/7 service hotline Body stability to EN 12642 Prepared for single-line number plate holder Contour marking with reflective tape acc. ECE R 048, white on sides, red at rear Painting Frame: DB 7350 Nova Grey "10-year warranty against rust-through" Support legs: Black coated Body/sides: Scania Urban Grey 2389173 Sliding tarp: RAL 7038 Agate Grey

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22701003408, lastna masa: 4.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2015, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Fifth wheel load (spec.): 11,000 kg Unladen weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Dcodpfsy Sk U Asx Aiaeh Chassis / Semitrailer - Logistics Version Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin 13 pairs of lashing rings recessed in external frame, each rated at 2.5 t External frame with "load-lock profile" for securing straps 24 t 2-speed landing gear, single-sided operation, straight base, without travel equalizer Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter fenders Axles & Suspension 1st axle: SAF drum, 2nd axle: BPW drum, Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, without connecting hose EBS, electronic braking system with EBS socket at the front, without connection cable Warning: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels & Tyres 385/55 R19.5, manufacturer at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights recessed as far as possible 2 white position marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin interchangeable sockets at the front, without connection cable Floor Phenolic plywood approx. 30 mm thick, cross joints with omega profile, fitted on longitudinal supports for high point load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor deformation due to weather influence possible! Front wall / front corner posts Front wall 1,200 mm high, steel corner posts in volume version, with "viewing windows" Registration / Signs Country of registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-row license plate holder Warning panel according to ECE - 70 Outline marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: RAL 3002 Carmine Red Landing legs: Black coated Front wall: RAL 3002 Carmine Red Attention, the images shown are archive photos! The vehicle may currently be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22702011668, lastna masa: 4.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2013, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, Attention: The images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Stated kingpin load: 11,000 kg Unladen weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth-wheel height approx.: 950 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarding High-tensile fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin 13 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t Outer frame with "Load-Lock profile" for attaching tie-down straps 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without side shift Wheel chocks with holders Side underrun protection made of aluminum Rear underrun protection, galvanized steel Quarter shell mudguards Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Dcjdpfx Aioy Sk Szsaoh Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer must only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 385/55 R19.5" manufacturer according to factory selection Steel rims, factory silver Electrics 24 Volt, multi-chamber lights Side-mounted yellow LED lighting, set as far inside as possible 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Floor Approx. 30 mm phenolic resin-coated plywood, cross joints with omega inserts, mounted on longitudinal beams for high point load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Flooring may be subject to warping due to weather conditions! Front Wall/Front Corner Posts 25 mm aluminum hollow section, approx. 1,200 mm high, volume version steel corner posts with 2 "windows" Registration / License Plates Country of registration: Germany With Dekra inspection and expert report 24/7-service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective tape in accordance with ECE R 048, white on sides and red at rear Paintwork Frame: RAL 3002 carmine red Landing legs: Black coated Front wall: RAL 3002 carmine red Attention: The images shown are archive photos! The vehicle may currently be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22701003406, lastna masa: 4.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2013, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, Attention, the images are archive photos! The vehicle may still be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Aggregate load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-trailer for Forwarders Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin 13 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t Outer frame with “Load-Lock profile” for attaching lashing straps 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation Wheel chocks with holder Side underrun protection made of aluminium Rear underrun protection made of steel Quarter shell mudguards Document box on front bulkhead, left side (mounted at a slight angle) Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake Dedpfx Asy Sk Rqsiajch 2 non-interchangeable coupling heads at front, without connector line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The towed vehicle may only be hauled by tractors which ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system Wheels and Tyres 385/55 R19.5", make at manufacturer’s discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lights (3 sets of old Hella lamps still at factory 2, to be installed if possible), yellow LED side lights installed as far in as possible 2 white position lights at the front, protected by 12 mm round iron crossbars welded above 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at front, without connection cable Floor Screen-printed plywood approx. 30 mm thick, transverse joints with Omega insert, mounted on longitudinal bearers for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping may occur due to weather exposure! Front Bulkhead/Corner Posts Approx. 1,200 mm high, steel corner posts in volume design Approval / Plates Country of registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line number plate holder Warning panel according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: RAL 3002 carmine red Landing legs: black coated Front wall: RAL 3002 carmine red Attention, the images are archive photos! The vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22702018968, lastna masa: 4.000 kg, največja dovoljena obremenitev: 23.000 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2016, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, The images are archive photos! The vehicle may currently be in use! 2-Axle Flatbed Semi-Trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Permissible/Technical Gross Weight: 27,000 kg Permissible/Technical Payload approx.: 23,000 kg Permissible/Technical Axle Load: 16,000 kg Permissible/Technical Fifth Wheel Load: 11,000 kg Unladen Weight approx.: 4,000 kg +/- building tolerance Overall length approx.: 13,850 mm Max. overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consisting of: Chassis - semi-trailer for transport logistics Fine grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with “Load-Lock Profile” for securing lashing straps. Notice: To attach the straps in combination with sideboards, the sideboards must be opened! 14 pairs of lashing rings, each rated for 2.5 t 24 t two-speed support winch, one-sided operation, with straight lower part, without compensating device Without landing legs Wheel chocks with holder Aluminium side underrun protection, Steel rear underrun protection Quarter shell mudguards Axles & Suspension SAF disc brake axles Air suspension Brake System 2-line compressed air brake system Spring-actuated parking brake 2 fail-safe coupling heads at front, without connecting lines EBS electronic braking system with EBS socket at front, without connection cable Attention: The trailer may only be towed by vehicles that ensure full ABS functionality! With raising/lowering valve Vehicle stability control system Wheels and Tires 385/55 R19.5" – Make as per manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white front position lights, protected with round iron 2 white/red lane marker lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable Dedpfjy Rxmwox Aiaech Floor Anti-slip phenolic boards approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point-load resistance, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front Bulkhead / Corner Posts 25 mm aluminium hollow profile, approx. 1,350 mm high, steel corner posts in volume version, with “holes” for forklift drivers Approval / Plates Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line number plate holder Warning plate according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paint Frame: RAL 3002 carmine red Support legs: black coated The images are archive photos! The vehicle may currently be in use!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, The images shown are archive photos. Further information Chassis: Drawbar central axle trailer Fine-grained steel welded construction Outer frame slightly slanted, with Load-Lock profile for lashing strap attachment. Note: To attach straps in conjunction with sideboards, the sideboards must be opened! Gear support foot at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection, galvanized Quarter-shell mudguards 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, can be locked with a padlock (padlock not included) 1 storage compartment for plug-in stanchions open, located underneath the loading platform 4 pairs of stanchion pockets recessed into the outer frame, 83 x 83 mm internal dimension 4 stanchion pockets centrally integrated in the floor, reinforced to the main frame, 83 x 83 mm internal dimension 6 pairs of plug-in stanchions, W=80/D=80/L=2000 mm, hot-dip galvanized Note: Stanchion pockets / plug-in stanchions are not designed for load securing of long goods, pipes, etc. without strapping Tandem trailer coupling Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length 4 x 500 mm from 1800 - 3800 mm, set to 1800 mm (Note: Observe load distribution and support load!) Axles & suspension GFA axles with tapered roller bearings and S-cam brake Axle/chassis laser alignment reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings and mechanical axle load equalization (rocker equalizer) Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims, factory silver Brake system 2-line air brake system Spring-loaded parking brake Integral air reservoir 2 foolproof couplings at the front with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lamps, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable Floor Anti-slip phenolic plywood, approx. 30 mm thick, for high point load capacity Note: Floor warping due to weather influences possible! Dcjdoi Ri H Depfx Aiajh Platform length approx. 6,200 mm Operating notes The specified gross weight is technically possible; depending on the load, the total weight under observation of permissible axle, support, and king pin loads may not be reached. Registration/plates Registration country: Germany With Dekra acceptance and certificate 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides, red at the rear Paintwork Frame DB 7350 Nova grey Warning: Archive Photos!

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2012, Oprema: ABS, *Tautliner *Sistem skozi-nalaganja Dcjdpfx Ajypa Eweiash *Pnevmatike 385/65R22,5 *3 vrste aluminijastih letvic *Zračno vzmetenje z uravnavanjem višine Vse informacije brez jamstva!

Stanje: rabljeno, številka stroja/vozila: WFDFLT21801003760, lastna masa: 4.480 kg, največja dovoljena obremenitev: 13.520 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2014, velikost pnevmatike: 445/45 r19,5, Leto izdelave: 2014, Further information Fine-grained steel welded construction 1 gearbox support leg at the front, with straight lower section and one-sided operation on the right in direction of travel Wheel chocks with holder, aluminium side underrun protection, steel rear underrun protection Half-shell mudguards slightly protruding over main frame, rear impact protection buffers Trailer coupling device for tandem trailers Drawbar with tested 50 mm towing eye, freight forwarding version, undercoupling drawbar Axles and Suspension BPW disc brake axles, manufacturer’s choice Air suspension with lift & lower valve Wheels and Tyres 445 / 45 R 19.5, manufacturer’s choice, steel rims, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake, Duomatic connection at the front, with connecting hose to truck, EBS, Electronic Braking System with EBS connector at the front, with connection cable Brand: Haldex, Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! Dcedpfjni Udzex Aiaoh Floor: Platform length approx. 7,300 mm, phenolic plywood floor Front wall: Aluminium approx. 1,200 mm, corner stanchions steel in volume version Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane-holding lights at the rear 1 x 15-pin connector at the front, with connecting cable Approval / Plates Country of approval: Germany, with Dekra inspection and report 24/7 service hotline, prepared for single-line license plate holders, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Stanje: rabljeno, številka stroja/vozila: WFDFLT22001011091, lastna masa: 5.340 kg, največja dovoljena obremenitev: 12.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2021, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2021, Further information Chassis central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Crank support leg at the front Foldable rear support Wheel chocks with holder Side underrun protection made of aluminum Full-width mud flaps at the rear Mud flaps in front of each axle and anti-spray mud flaps behind each axle 1x spare wheel holder for 1 E-tyre, with wheel fixing kit 1x spare wheel, same brand as main tyres, steel rim 1x stainless steel storage box, width=600/height=400/depth=500 mm, with polished lockable door Lashing points for low loader 5 pairs of stake pockets embedded in the outer frame, inside dimensions 70 x 40 mm (can be retrofitted with 5t lashing rings, not included) 7 pairs of lashing mushrooms recessed into the top and side of the outer frame, each 10 tonnes 2 pairs of fold-down lashing eyes additionally recessed into the low bed platform, each 10 tonnes (1 pair at the front and 1 pair on the rear slope) Towing device central axle trailer Drawbar with certified 50 mm drawbar eye Axles + Suspension SAF drum brake axles Laser-measured axles/chassis to reduce tyre wear and fuel consumption Axle spacing 1810 mm (then 10 tonne technical axle load) Air suspension Brake system 2-line compressed air brake system, color-coded air line layout for easy maintenance. Dcedpfx Aiop N Dgueajh Spring-loaded parking brake Duomatic coupling at the front, with connecting line to towing vehicle, EBS, Electronic Braking System with EBS connector at the front, with connection cable Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lift & lower valve Vehicle - Driving stability system Axle load detection via EBS Canbus signal, for display on the dashboard display, truck must be suitably pre-equipped, no truck installation (not a certified scale) Wheels and Tyres 235/75 R17.5 Brand Fulda Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at the front, with connection cable 1 additional LED work light at the rear, switched via reversing light 1x LED beacon with holder, switched via side light (lamp removable) Flooring subsequently with 70 mm softwood flooring, wheel arch area with steel/chequer plate covering Rear beavertail with Mega Grip serrated grating coating Low-bed platform incl. rear beavertail 6500 mm Front wall / corner stanchions 25 mm aluminium hollow section, 400 mm high, removable Loading ramps Steel ramps 3600 mm long, 750 mm wide, split with cable tension, laterally adjustable Ramp traverse, minimum gap approx. 600 mm, maximum outer width approx. 2880 mm Ramp surface with Mega Grip serrated grating Operated hydraulically via own electro-hydraulic unit, mounted in a steel box, operation on the right side at the front. Note: NATO socket with connecting cable on the truck required. Cable must not be connected during driving! Hydraulic lateral adjustment of loading ramps, individually controllable (only in combination with hydraulic ramp actuation)

Stanje: rabljeno, največja dovoljena obremenitev: 8.470 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, prva registracija: 06/2018, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 11.800 kg Lastna teža: 3.330 kg Dedoy Arkaopfx Aiasch Nosilnost: 8.470 kg Skupna dolžina: 6.950 mm Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / Nakladalna širina ca. 2.420 mm Višina nakladanja: ca. 950 mm Dodatne informacije: - Sprednja podporna noga - Zložljivo zadnje podpiralo - Stranice 450 mm - Velik pritrdilni paket - Kadar vroče cinkan, vključno s pasivacijo - Nakladalne rampe opcijsko 1.280,00 €

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 940 mm, Leto izdelave: 2026, Oprema: ABS, JUMBOPLATEAU SATTEL KÄSSBOHRER 3-achs K.SPJ3 12/27 / JUMBO / BPW / LIFTACHSE fabrikant/hersteller: KÄSSBOHRER EZL: NEUFAHRZEUG Masse: 13.620 x 2.480 x 940 mm Zulässiges Gesamtgewicht: 36.000 kg Leergewicht: 5.700 kg Aufliegelast: 12.000 kg Luftfederung, zum Heben/Senken Trommelbremsen Ersatzradhalterung ABS EBS AGS Achsfabrikat: BPW ECO Trommel Liftachse Siebdruckboden Zurringe Werkzeugkasten Dedoyi I Efopfx Aiasch Lackierung Aufbau: MB 7350 Lackierung Chassis: MB 7350 Bereifung: 12-fach Reifenzustand: 100 % Bereifung HA 235/75 R17,5 Maße Ladefläche hinten: 9.600 mm, vorne: 4.065 mm 13 Paar stabile, versenkte Zurringe, je 4 t / + 11 Paar im Außenrahmen Vorne: 15 + 2 x 7-pol. Dose (Licht) Ladedruckmanometer Maße: min. Höhe 870 mm / normal 940 mm / max. 1.010 mm Alle Angaben ohne Gewähr, Zwischenverkauf vorbehalten! Sollten Sie Fragen zu diesem oder anderen Fahrzeugen haben, rufen Sie uns an. If you have any questions for this or any other trailer/car, please call us.

Stanje: novo, številka stroja/vozila: 56c59c8aba35227ffb44c9f75, lastna masa: 11.350 kg, največja dovoljena obremenitev: 26.650 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Jumbo semi-trailer chassis Steel welded construction with closely spaced cross members, reinforced design, low-bed outer frame profile, suitable for the transport of construction machinery up to 32,000 kg and with a maximum machine width of up to 2,550 mm. Fifth wheel plate with interchangeable 2” king pin. Rear taper approx. 1,200 mm and 7°. Ramp roller closed at the top with steel/chequer plate. In the low-bed area: Omega rail mounted laterally below the outer frame for curtain mounting and as a spacer to the lashing mushrooms, not in the wheel area. For hydraulic lift table: additional fixed lightweight outer frame with Omega profile; lift table can be raised with the tarpaulin closed! 24 t 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, load compensation, free rear swing radius approx. 1,950 mm. Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Quarter-round mudguards in front of and behind each axle Anti-spray flaps behind each axle Steel rear underrun protection Full-width rear spray flap 4 stainless steel toolboxes, w=800/h=350/t=350 mm, polished lockable doors, 2x on front left and 2x on front right before the first axle Hydraulic lift table behind gooseneck, approx. 3,000 mm long, hydraulically raisable to drive over the gooseneck, with mechanical locking in raised position (cylinders angled for ground clearance, Fliegl standard). Operation from front right + additional remote control operation (same device as ramp control). Lift table operable with closed tarpaulin! Curtain mounting in the lift table area on a separate lightweight Omega-profile outer frame; lift table operable with closed tarpaulin. Lashing mushrooms usable even when table is lowered! Lashing eyes Gooseneck: 4 pairs of 5 t lashing eyes recessed into outer frame 2 pairs of lashing mushrooms recessed at the top and on the side of the outer frame Low bed 8 pairs of lashing mushrooms (top and side of outer frame), each 10 t 9 pairs of 5 t lashing eyes recessed into outer frame Axles & suspension SAF drum brake axles Last axle self-steering, with automatic reverse lock via reversing light, additional manual locking on vehicle Air suspension with raise/lower valve and auto-reset function Raise/lower function with quick exhaust 1st axle automatic lift axle, including forced lowering and traction aid, activated by 3x braking (traction aid works up to 30% axle overload and max 25 km/h) Axle lift below recommended driving height; therefore, no warranty against tyre damage Wheels and tyres 235/75 R17.5 From leading manufacturers Twin steel rims, factory silver Braking system Dcodpfoi Riw Aox Aiaoh 2-line compressed air brake system Spring-type parking brake 2 fail-safe coupling heads (front), no connecting line EBS, Electronic Braking System with front EBS socket, no connection cable Note: Trailer may only be towed by tractors that ensure ABS is working! Axle load detection via EBS in truck, without truck installation (not a certified scale) Electrics 24 volt, multi-chamber rear lamps, yellow LED side marker lighting 2 white LED front position lights 2 white/red lane assist rear lights 1 rotating beacon with bracket, switchable via parking light (detachable light) 2 pairs of double LED warning boards, extendable up to 3,000 mm 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connecting cable

Stanje: novo, številka stroja/vozila: 207ad28f83705ed0d38a4f174, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis Change Central-Axle Trailer Fine-grain steel welded construction Front stops, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 rear-flush (with 7.15 swap bodies not rear-flush, fork pockets/frame protrude) Telescopic support leg at front 1 pair gearbox support legs at front, with straight lower part and single-sided operation on FR right Wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Semi-shell mudguards Dcodpfxoi Ri Iao Aiash Mounting for truck-mounted forklift at rear, including 2 fork insertion pockets, 2 extendable support tubes, holder for chain safety device with locking pin. Rear underrun protection with lighting unit, foldable. Includes 2 loose rubber buffers for rear wall protection; counterweight recommended! Note: Partial low ground clearance when fitted with forklift, potential poor trailing behavior, no warranty! (Forklift self-weight up to max. 1,500 kg for trailers). (With proximity switch for forklift control in combination with lift axle). Due to the forklift mount, axles are shifted rearwards; mind load distribution when driving without forklift—customer's risk! (For swap body trailers, driving with a forklift is only permitted in combination with a swap body). Forklift mount as per AU 203670 adapted for 7.45 m swap bodies. Counterweight at front between frames, approx. 300 kg, if required—exact assessment still pending Towing device for central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, or final check required upon order) Lower coupling drawbar Drawbar without length adjustment Axles + suspension SAF drum brake axles as per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Brake system Two-line compressed air brake system Color-coded line layout for easy servicing Spring-loaded parking brake Duomatic connection at front with line to tractor unit, located FR-left Duomatic connection at front with line to tractor unit, located FR-right EBS electronic braking system with EBS plug at front and connection cable, FR-left Note: Trailer may only be towed by vehicles that ensure the effectiveness of ABS! With lift and lower valve, hold function in both raised/lowered position Vehicle stability system Wheels and tires 235/75 R17.5, brand at manufacturer’s discretion Twin arrangement steel rims, factory silver Electrics 24 volt, 4 x 3-chamber lights + 1 round reversing light and + 1 round rear fog light, side yellow LED lighting, protected installation! 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connection cable, FR-left 2 x 7-pin sockets at FR-left rear for truck-mounted forklift 1 x 15-pin socket at FR-left rear for truck-mounted forklift LED worklights to both sides behind the 2nd axle (switched via reverse gear) Extra LED worklight at rear, switched via reverse gear Approval / License Plates Germany With Dekra inspection and certificate (per §13 EU FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on sides and red rear Paint Frame in DB 7350 Novagrau 10-year warranty

Stanje: novo, številka stroja/vozila: 06017a31026c05fc8f6ccf5ae, lastna masa: 3.055 kg, največja dovoljena obremenitev: 14.945 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis: Swap body turntable trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20' base for swap bodies 7.15 and 7.45 meters Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter mudguards at the front and half-shell mudguards at the rear Drawbar turntable trailer coupling Drawbar with certified 40 mm draw eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Braking system 2-line air brake system, color-coded piping for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS plug at the front and connecting cable Note: The trailer must only be towed by towing vehicles that ensure ABS functionality! With raise & lower valve, holding function for both positions Wheels and tires 235/75 R17.5, manufacturer brand at the manufacturer's discretion Steel twin rims, factory silver Electrics 24V system, LED multi-chamber lights with resistor, side marker lights in amber LED, license plate illumination in LED (Note: certain towing vehicles may show fault diagnoses despite correct function) 2 white front position lights in LED 2 white/red rear outline marker lamps in LED 1 x 15-pin plug at the front with connecting cable Additional LED work light at the rear, switched via the reversing light Approval / Plates Germany Dcedji Ri Rcjpfx Aiash With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear Paintwork Frame in DB 7350 Nova Grey Note: Archive images!

Stanje: novo, številka stroja/vozila: c13a96854ea37997845c1bf36, lastna masa: 6.860 kg, največja dovoljena obremenitev: 28.140 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235/75 17,5,

Stanje: novo, številka stroja/vozila: d24246f092ae53c0e155d19dd, lastna masa: 2.400 kg, največja dovoljena obremenitev: 13.600 kg, skupna masa: 16.000 kg, Further information Chassis: Tandem trailer Steel welded construction with approximately 152 mm high floor assembly, load-oriented and torsion-resistant steel frame design. Longitudinal floor frame with a load-resistant outer frame and guiding tunnel spaced at 600 mm intervals, tunnel with top and side alignment guides, tunnel height approx. 45 mm. Four container corner castings suitable for 20ft interchange units. 4 Jumbo support legs for parking height of 970 mm, laterally extendable and can be folded by 90°, with short safety struts and locking device, frame-mounted pin lock and robust drop latch as secondary transit locking system, symmetrical arrangement of the support legs—Type A2 for CWB C 745/782 for parking height approx. 970 mm. Reinforcement between support feet. 7 pairs of recessed lashing rings in the outer frame, each rated for 2.5 tonnes. Heavy-duty pallet stops on both sides, approx. 20-25 mm high, lash points every 200 mm, loading height reduced by approx. 20-25 mm. Side door retainers. Rear underrun protection made from flat steel. Floor Anti-slip phenolic plywood, approx. 27 or 30 mm thick (at manufacturer's discretion), designed for high point loads, suitable for forklift axle loads up to max. 4400 kg. Front wall/corner stanchions Front stanchions 2,800 mm high, remainder closed with tarpaulin, steel corner stanchions in volume design, quick-release system for side curtain at front wall. Centre posts 1 pair of sliding posts, fully adjustable lengthwise, with four latching pockets and an extended pocket at the bottom. Insert slats Three rows of aluminium V-insert slats or wooden slats as per manufacturer’s choice, One extra row of aluminium V-insert slats. Rear wall/rear corner stanchions Rear corner stanchions, steel up to the underside of the roof, tarpaulin hangers with round tube and tension ratchet. Rear portal doors, double-leaf, each door with two internal locking rods. Tarpaulin Tarpaulin with welded horizontal and vertical tension belts. Tension locks made from stainless steel. Roof Sliding curtain roof, rear end-lift foldable, roof can slide from rear to front, L-shaped roof beam suitable for the automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin colour: white. EcoLift - lifting roof, can be raised by approx. 380 mm, gas strut assisted. Approval / Plaques Country of registration: Germany Manufacturer certificate to EN 12642 XL Paintwork Djdskt Ni Uopfx Aiasch Frame: hot-dip galvanized Front corner stanchions: hot-dip galvanized Front wall: aluminium Rear corner stanchions: hot-dip galvanized Rear wall: white Tarpaulin: RAL 9005 deep black with advertising lettering Note: Images are archive photos.

Stanje: novo, številka stroja/vozila: 8df1ead53cc82aeb51e50a37d, lastna masa: 4 kg, največja dovoljena obremenitev: 13.880 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Turntable Chassis for Waste Management Fine-grain steel welded construction Dcedpfx Aioi Ri Nuoash Container locking: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is a 2-point version, acting from the inside; locking of roll-off containers with an internal web is not possible (for transporting roll-off containers with subframes according to DIN 30722). Note! At the beginning of the roller recess at the front, the container must be slid on completely flat! Longitudinal guide rails laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushroom fittings recessed into the upper and side outer frame, each with 5 t capacity 7 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included in delivery) 2 wheel chocks with holders Side underrun protection in aluminum Rear underrun protection in steel Quarter-shell mudguards according to EC standard With anti-spray mudflaps according to EC standard Drawbar equipment - Turntable trailer Towing bar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel twin rims, factory silver Braking System 2-line compressed air brake system Spring chamber parking brake 2 polarity-proof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrical Equipment 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin polarity-proof plugs at the front, with connection cable Floor Steel floor Roller recess for container at the front recessed in the floor, for roll-off containers from 5,000–7,000 mm length Note: Slight floor undulation due to welding distortion is possible! Ramps Lockable storage compartment for ramps beneath the loading platform Operating Notes At 10,000 kg axle load, a special permit is required. This permit must be applied for separately in each federal state; the legislature is not required to guarantee approval for a 20-ton GWV. Customer’s risk. The specified total weight is technically possible; depending on the cargo, the total weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Warning plate according to ECE - 70 Paintwork Frame DB 7350 Nova grey 15-year warranty against rust-through Note: Floor undulation possible due to hot-dip galvanizing! Drawbar KTL black Attention: Archive images!

Stanje: novo, številka stroja/vozila: 81b04fd2e28f354df79a4c3b3, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5``, Further information Chassis: Central axle swap trailer Fine-grain steel welded construction Front stop, adjustable lengthwise and foldable 2 pairs of removable guide rollers, front and rear Locking-folding adapter + height adjustment for support height 1,000–1,120 mm, folding centre supports and guidance rollers repositionable upwards 4 container locks with robust outriggers on 20' base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support legs at the front, with straight base and single-side operation, positioned front right 2 wheel chocks with holder Side underrun protection: Aluminium Rear underrun protection: Steel Half-shell mudguards Dcedpoi Riy Nefx Aiaoh Drawbar arrangement: Central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift; detailed verification required upon ordering) Undermount coupler drawbar, free drawbar length approx. 2,200 mm Axles + suspension: SAF drum brake axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Braking system: 2-line compressed air braking system, colour-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle, connection front right EBS: Electronic Braking System with EBS socket at the front, with connecting cable, connection front right Warning: The trailer may only be towed by towing vehicles that ensure ABS functionality! With lifting & lowering valve, holding function in both lower and raised positions Vehicle stability control system Wheels and tyres: 235/75 R17.5'', brand at manufacturer’s discretion Steel twin wheels, factory silver Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED marker lights 2 white position lights at front 2 white/red lane-keeping lights at rear 1 x 15-pin socket at the front, with connecting cable, connection front right 2 additional LED work lamps at the rear, controlled via reverse light 1 LED work lamp centrally at the front between the crossmembers, rear-facing, controlled via reverse light Operating instructions: The indicated gross weight is technically possible, yet depending on the cargo, the gross weight may not be reached when observing permitted axle, support, and kingpin loads. (Poor driving and trailing characteristics may result from improper weight distribution) Country of registration / Plates: Germany With Dekra inspection and certification (according to §13 EC-FGV) 24/7 service hotline Prepared for single-row licence plate holder Warning plate as per ECE-70 Contour marking with reflective tapes according to ECE R 048—side white, rear red Paintwork: Frame DB 7350 Novagrau 10-year warranty against rust-through Note: Archive images!

Stanje: novo, številka stroja/vozila: 59ade5d1599dcdee29033ac46, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 435/50 r19,5, Further Information Chassis semi-trailer for freight forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Full-width hook-in bar for aluminium ramps Frame in reinforced design for vehicle loading (up to the outer frame) Outer frame with load-lock profile approx. every 400 mm, for lashing strap hooks 10 pairs of lashing mushrooms recessed in the outer frame, each rated at 10 t 24 t two-speed landing gear with single-sided operation, half-round base and straight mounting plate, with compensating slide Folding rear support 2 wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray mud flaps behind each axle Pair of ferry lashing rings, yellow marked 1 spare wheel holder for 1 spare wheel, with wheel fastener kit 2 plastic toolboxes with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (padlock not included) Container locks: 4 pairs recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, front-most position as flush fold-down lock 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm Dsdpeld Ihljfx Aiaoch 10 stake pockets recessed centrally in the floor, internal dimension 70 x 40 mm 2 cross lashing/stake rails recessed in the floor across the full width up to the outer frame (max. usable internal width between outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spacing approx. 60 mm (between round bars). Lower side with angle bracket as a termination, half open downward. For lashing and fitting stakes 80 x 80 mm as per Fliegl data sheet, positions 2 and 4 20 plug-in stanchions, hot-dip galvanized Note: Stake pockets/plug-in stanchions are not suitable for securing long goods, pipes, etc. by themselves without lashings Storage space for aluminium loading ramps, ramps insertable from the rear 3 pairs of folding lashing rings, 10 t in the outer frame (1 pair in front of bulkhead, 2 pairs in rear area) Axles + Suspension SAF disc brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, including forced lowering and start-off aid, activation via 3x braking (start-off aid operates up to an axle overload of 30% and up to max. 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage 2 ride heights, manually adjustable via rotary knob, 1 for 980 mm coupling height, 1 for 1100 mm coupling height (Note: Vehicle with inclined position) Braking System 2-line air brake system Color-coded airline routing for easy servicing Spring-actuated parking brake 2 front anti-mistake coupling heads, without interconnection line EBS, electronic braking system with EBS socket at the front, no connecting cable Attention: The trailer may only be towed by tractors that ensure ABS functionality! With lift & lower valve 2 ride heights, manually adjustable via rotary knob, 1 for 980 mm coupling height, 1 for 1100 mm coupling height (note: check total height, overheight is the customer's risk) Ride height in conjunction with lift axle: when lift axle is raised, loading and overall height increase by 50 mm (for Mega Flex only at low ride height or coupling height) Vehicle stability control system Wheels and Tyres 435/50 R19.5 manufacturer as per supplier's choice Steel rims, factory silver Electri

Stanje: novo, številka stroja/vozila: 3c70e9a5d82cfb3ada79baf95, lastna masa: 8 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 26 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Dodpfx Asi Ri Hrjiaoch Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Dodpoxrx Nlofx Aiaoch Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Dcsdpfx Aisvv D Ixeajh Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 8.665 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 910 mm, skupna širina: 2.550 mm, NEW VEHICLE Fliegl Tandem Trailer for Timber Transport with Stanchions, Model TPS 118 Holz Gross weight: 11,800 kg Unladen weight: 3,135 kg Payload: 8,665 kg Overall length: 8,350 mm Load length: 6,200 mm Width: 2,550 mm Loading height: 910 mm Further information: plus freight/setup from storage location 26639 Wiesmoor: €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled with "Load-Lock profile" for strapping hooks Front geared support leg Rear support, foldable 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Open storage compartment for insertable stanchions under the loading platform 4 pairs of stanchion pockets recessed in the outer frame, internal dimension 83 x 83 mm 4 stanchion pockets recessed mid-floor, reinforced to main frame, internal dimension 83 x 83 mm 6 pairs of plug-in stanchions: w=80 / d=80 / l=2000 mm, hot-dip galvanized Note: Stanchion pockets/plug-in stanchions are not intended for the sole securing of long materials, pipes, etc. without lashing. Side underride protection in aluminum Drawbar: Tandem trailer coupling Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length 4 x 500 mm from 1,800 - 3,800 mm, currently set to 1,800 mm. (Note! Observe load distribution and drawbar load) Axles + Suspension: GFA or BPW axles (manufacturer's choice), with tapered roller bearings and S-cam brakes "Axles/chassis laser aligned" for reduced tire wear and fuel consumption Parabolic spring suspension with maintenance-free rubber-metal bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires: 235/75 R 17.5" Steel rims, factory silver Brake system: 2-line compressed air brake system Spring-actuated parking brake Integral air reservoir 2 fail-safe coupling heads at front with connection to tractor unit, ABS and ALB, ABS plug front, complete with connection cable Attention: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS! Electrics: 24 Volt, multi-chamber LED lights, side marker lights in yellow LED, license plate lights in LED (Note: certain towing vehicles may trigger diagnostic errors although function is ensured) 2 white position lights at the front in LED Dedpfew N U I Hsx Aiaoch 2 white/red lane marker lights rear in LED 2 x 7-pin ISO plug at the front, fail-safe, with connecting cable Floor: Anti-slip phenolic plywood, approx. 30 mm thick, for high point load resistance Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Operating notes: The gross weight specified is technically feasible. Depending on the cargo, gross weight may not be achievable due to axle/support/saddle load restrictions. Special permit required if towing length exceeds 18,750 mm. Observe national approval regulations. Registration/Plates: Country of registration: Germany with Dekra inspection and certification 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, side white and rear red Paintwork: Frame hot-dip galvanized including passivation "15 years warranty against rust-through" Note: Floor corrugation due to hot-dip galvanizing possible! Vehicle from ongoing production – delivery time approx. 2-3 weeks.

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform Djdorducpjpfx Aiajch 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2004, * trailing steering axle * air suspension * front wall Dcjdpowi Edmsfx Aiash * unladen weight: 6,200 kg -----Internal vehicle number: 9150-----Errors and prior sale excepted.