Fliegl Sds 390 nakup rabljenega (1.843)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. Chassis Low-bed Semi-Trailer Steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin and two kingpin positions, 24 t two-speed landing gear, single-sided operation, with straight lower section, without load compensation Rear support foldable 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Mudguards in front of the 1st axle and behind each axle with antispray, compliant with EC regulations Extendable widenings to 3,000 mm (not in rear slope) Storage compartment for timber planks in the centre of the loading area 70 mm timber planks for extension to 3,000 mm Lashing Points Low-bed 2 pairs of ring lashing eyes each rated for 5 t at the front on the gooseneck 11 pairs of lashing mushrooms embedded on the top and side of the outer frame, each rated for 10 t 2 x on gooseneck 9 x distributed on the low-bed deck First lashing point 250 mm from the front and last one max. 250 mm from the rear, distance between lashing points not greater than 1,100 mm 8 pairs of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) Axles + Suspension SAF drum brake axles Air suspension Wheels and Tyres 235 / 75 R 17.5 Steel rims, twin arrangement, factory silver Braking System 2-line compressed-air braking system Coloured hose arrangement for easy servicing Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 anti-mistake couplings at the front, without connection line With lift & lower valve Iaedpfx Aji Ri E Roiceu Axle load detection via EBS-Canbus signal, for display in the driver’s cab Vehicle stability control system Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-mistake sockets at the front, without connecting cable 1 LED beacon with holder 2 pairs of double warning boards, LED lit and extendable to 3,000 mm Floor Gooseneck with steel plate covering Storage box fitted into the ramp to gooseneck Then 70 mm softwood flooring, in wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood flooring Low-bed area including rear slope: 9,200 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber planked Hydraulic operation via tractor auxiliary drive with throttle, operation on left side in driving direction Hydraulic connection with SVK coupling NW 10/3, without connection hoses Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Lowbed Semi-Trailer Chassis Steel welded construction, fifth wheel plate with replaceable double kingpin and two kingpin positions 24 t two-speed landing gear, single-sided operation, with straight lower part, without compensating device Rear supports foldable 2 wheel chocks with holders Side underrun protection in aluminium Quarter-shell mudguards in front of and behind the axle assembly 1st pair of wheel recesses recessed after the gooseneck in the lowbed platform area, with ramped entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axle A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader types with precise specifications (if the total height is exceeded). Wheel recess covers sliding out from the main frame, with timber inserts. Extendable widening to 3,000 mm (not in rear ramp slope and not in the bottom of the wheel recesses) Storage compartment for timber planks on the gooseneck, positioned transversely at the front Isdsi Ri Hcopfx Aicjau Timber planks 70 mm for widening to 3,000 mm Tie-down points lowloader 2 pairs of ring lashing eyes, each 5 t at the front on the gooseneck 11 pairs of lashing mushrooms recessed into the upper and side outer frame, each 10 t 2 x on the gooseneck, 9 x distributed in the low loader bed, first lashing eye 250 mm from the front and the last max. 250 mm from the rear, distance between lashing eyes not exceeding 1100 mm 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Air suspension Wheels and tyres 235 / 75 R 17.5 to manufacturer’s choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front with raise & lower valve Axle load detection via EBS Canbus signal, for display in the driver’s cab, truck must be correspondingly equipped Vehicle Stability Control System Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe sockets at the front 1 x LED beacon with holder, switchable via parking light 2 pairs of warning boards, double, LED illuminated and extendable to 3,000 mm, removable with plug Flooring Gooseneck with steel/chequer plate overlay Storage box embedded in the transition slope to the gooseneck After that, with 70 mm softwood flooring; in the bottom of the wheel recesses and wheel arch area steel/chequer plate overlay Lowloader platform including rear ramp slope 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp securing device below Tailored Transport Solution Configure your Fliegl vehicle according to your individual requireme

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.830 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.750 mm, prostornina tovornega prostora: 41 m³, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, skupna višina: 3.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized individually to the customer's specifications. Further information Chassis: Tipper semi-trailer Iaodpei Ri Efsfx Aicju Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2-inch kingpin Patented curved front panel 24-ton, 2-speed landing gear, single-sided operation, with straight base, without compensator 2 wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard bracket, stone-repellent surface With anti-spray mudflaps only on the last axle 1 tarpaulin support rod with bracket 2 towing hooks at rear Axles & Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment for reduced tire wear and lower fuel consumption Axles in off-road version Air suspension 1st axle automatic lifting axle, including forced lowering and traction aid, operated by braking 3 times (traction aid active up to 30% axle load exceedance and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system with color-coded lines for easier servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, no connection cable Note: The trailer may only be towed by tractor units that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5, tire brand at the manufacturer's discretion Steel rims, factory silver Electrics 24 volts, multi-chamber rear lights, yellow LED side lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulic via truck PTO Body Aluminum box body made from high-quality, wear-resistant material, front wall 5 mm thick, with external side walls from 30 mm hollow-chamber profiles, clean welded, with a bulk material-repelling upper rail profile. Interior with step access at the front wall (not in combination with Cramaro). Shovel and broom holder outside on front wall. Greenline - conical and aerodynamic body shape Membrane tailgate Tailgate suspended with double-joint hinges and two-leaf division 1/2 to 1/2, top with swing arm, each leaf with a grain chute. Tailgate with rubber seal. Note: Heat resistant up to max. 170°C! Continuous 6 mm thick floor Standing platform with access ladder, connection plate for air/electricity and brakes with ample free space for optimal operability. Roll-over tarpaulin stowed on right side (FR-right), with central locking on left side (FR-left).

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.900 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 38 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to match your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Patented curved front panel Central telescopic support leg, uncoupling when loaded is not possible, in uncoupled state the vehicle must stand with a slope to the rear. 2 wheel chocks with holders Folding underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface With anti-spray mudflaps only on the last axle 1 tarpaulin bar with holder 2 rear towing hooks Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis to reduce tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle with automatic lift axle function, including forced lowering and starting aid, activation: brake 3 times Hot-dip galvanized lift axle mechanism, 10 years warranty against corrosion perforation Braking System 2-line air brake system with color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable couplings at front EBS (Electronic Brake System) with EBS socket at front With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5, manufacturer at manufacturer’s option Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane indicator lights at rear 2 x 7-pin non-interchangeable sockets at front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, nominal width 48 mm (without hose connection) Operation hydraulically via truck PTO Tipping Body Aluminum box-type body made of premium-grade, wear-resistant alloy; 5 mm thick front wall, outer side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail profile. Interior with access steps on front wall (not in combination with Cramaro). Shovel and broom holder mounted outside on front wall. Greenline - conical and aerodynamic body design Membrane-type rear wall Rear wall as pendulum flap with double hinge, external mounting and dual hook locking. Rear wall with rubber seal – Note: heat resistant up to max. 170°C! Continuous 6 mm floor plate Standing platform with climb, connection plate for air/electrics and brakes, large clearance for optimal usability. Roll tarp stored on passenger side, central locking on driver side Paintwork Frame finished in DB 7350 Novagrau gray 10 years Tailored Transport Solution Iajdpfx Asi Riz Rjicou Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individually realized to customer demand.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202038273, lastna masa: 5.680 kg, največja dovoljena obremenitev: 29.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 2.680 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis semi low loader for haulage Fine-grained steel welded construction in reinforced Scandic design, fifth wheel plate with replaceable 2" kingpin Outer frame in low loader design: 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated for 10 t 10 pairs of combined stake pockets with lashing rings (bolted), each rated for 5 t, recessed in outer frame, approx. 72 x 42 mm inner dimensions Outer frame with "Load-Lock profile" for fitting tensioning straps, approx. one hole every 400mm 24 t, 2-speed landing leg with single-sided operation Free swing radius to landing foot approx. 2,500 mm, landing foot width approx. 2,600 mm Extension ladder at rear 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Spray flaps at the rear over entire width Quarter mudguards in front of and behind axle assembly With antispray mudflap only on rearmost axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable In front of axles, 1x left, 1x right 1 storage box, full width, closed, beneath loading floor, approx. w=450 mm/h=400 mm/d=2,460 mm, mounted directly in front of axles 3 tie-down/stake rails with 4 pairs of locking cut-outs, recessed transversely in floor over total width up to outer frame (max. usable internal width between outer stanchions approx. 1,782 mm), approx. 80 mm high. With cut-outs at top and bottom for lashing and fitting stakes 80 x 80 mm. Bottom with angled plate as stop, half open downward. Combined design for 2 x 20 ft or 1 x 40 ft container, 4 pairs of container lock adapters 10 combined plug-in stakes with cut-out at bottom, w=80/ d=50/ l=1,200 mm 6 plug-in stakes w=80/ d=80/ l=1,200 mm, hot-dip galvanized Axles and Suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle auto lift, additionally electrically operable from tractor, including forced lowering and start aid Braking system 2-line compressed air braking system Spring-type parking brake 2 non-interchangeable couplings at front 24V EBS, electronic braking system with EBS socket at front Note: Towed vehicle may only be towed by towing vehicles that guarantee proper functioning of ABS! with raise & lower valve + auto-reset function Vehicle Stability Control System Axle load detection via EBS CAN bus signal, display in driver’s cab Wheels and Tyres 385/65 R22.5" Steel rims "TPMS" tyre pressure monitoring system according to ECE R 141, display via towing vehicle, through EBS Electrics 24 Volt, multi-chamber lamps, side yellow LED marker lights Side yellow LED marker lights linked with indicator “flashing side markers” 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front 2 additional LED work lights, at rear 1 LED beacon with mounting bracket 2 pairs of LED illuminated warning signs, extendable to 3,000 mm 2 additional LED worklights, top of front wall Additional 7-pin socket in rear underrun guard Floor Slip-resistant screen printing panels approx. 30 mm thick, for high point load, suitable for forklift wheel loads up to max. 7,900 kg "Premium floor sealing", circumferentially sealed joints Front wall / corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner posts steel, volume design Front wall additionally lined inside with 1,250 mm high phenolic plywood Isdozbbpujpfx Aicjau "Crash Blocker", bottom inside at approx. 140 mm high, with steel impact protection

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801013475, lastna masa: 7.180 kg, največja dovoljena obremenitev: 28.820 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Available in multiple units. Fine-grain steel welded construction, saddle plate with replaceable 2" kingpin, additional splash guard made from sheet metal riveted to the underside floor, in the gooseneck area above the rear axle of the tractor unit as well as above the wheels on the vehicle. Reinforced frame version for vehicle loads up to the outer frame. Outer frame equipped with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushrooms recessed into the outer frame, each rated at 10 tons, 24 ton 2-speed landing gear, single-sided operation, with semi-rounded lower section and straight connection plate, featuring load compensation, foldable rear support, wheel chocks with holder, aluminum side underrun protection, steel underrun protection, quarter-fender mudguards in front of and behind each axle, with additional sheet splash guards over the wheels, fitted with anti-spray mud flaps according to EC standards, 1 plastic toolbox (600 x 425 x 460 mm), lockable. Container locks: 4 pairs of locking recesses embedded in the floor for 2 x 20-foot or 1 x 40-foot container, 4 pairs of container locking adapters (additional cross supports at the front and rear of the container required; the container must be evenly supported across the width; cross supports not included). Ramp attachment bar at rear extension across full width, mechanical rear extension with hand crank extendable by approx. 1,500 mm, lockable every 500 mm, includes extendable underrun protection with lighting. Lane area fitted with Lohr perforated sheet, central area with steel checker plate, storage space for drive-on ramps integrated in rear extension—usable only when rear extension is extended by approximately 1000 mm. For ramp transport with retracted rear extension, ramp storage is located on the right in front of the axles. One pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg. Electric cable winch, 24 volts, pulling force approx. 8,165 kg, centrally mounted at the very front, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers. Axles & Suspension: SAF or BPW drum-braked axles as selected by the manufacturer, air suspension, first axle with automatic lift axle, additionally electrically operable from the truck, including forced lowering and drive assist. Brake system: 2-line compressed air brake system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, EBS (electronic braking system) with EBS socket at the front (no connection cable provided), with raise & lower valve and fast venting, hold function in lowered position + auto-reset function, vehicle stability system, axle load detection via EBS CAN bus signal. Wheels & Tires: 235 / 75 R 17.5" — brand per manufacturer's choice, twin-mounted steel rims. Electrics: 24 volts, LED multi-chamber lights, side yellow LED lighting, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, operated via parking light, 2 pairs of double LED-illuminated warning panels extendable to 3,000 mm, 1 additional 7-pin socket (ISO 1724) in the rear underrun protection, 2 side LED work lights (1 each on front left and right). Ijdpfxsza Aiyj Aiceau Floor: Lohr perforated stee

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801012811, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: srebrn, multiple units available Chassis fifth wheel forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, reinforced frame for vehicle loading, outer frame with "Load-Lock profile" every approx. 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on top/outside of the outer frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminum side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, 1 spare wheel holder for 1 single wheel, incl. wheel mounting kit, 2 lockable plastic toolboxes, w=600 / h=425 / d=460 mm, container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, front-most position is a recessed fold-down lock, 10 pairs of stanchion pockets recessed in the outer frame, 70 x 40 mm internal dimension, 10 stanchion pockets recessed centrally in the floor, 70 x 40 mm internal dimension, 2 cross tie-down/stanchion rails recessed into the floor spanning the full width to the outer frame (approx. max usable interior width between external stake pockets 2170 mm), about 100 mm high. Includes 20 mm round steel rails at top and bottom, spacing about 60 mm (between rails); bottom end with angled sheet as closure, open downwards halfway. For lashing and inserting stakes up to 80 x 80 mm. Arrangement: Positions 2 and 4 according to Fliegl data sheet, 20 removable stakes, hot-dip galvanized, storage space for aluminium drive-on ramps, ramps can be inserted from the rear, 3 pairs of fold-down lashing points (10 t) in outer frame (1x in front of front wall and 2x at the rear) Iedpfeza Agrjx Aiceau Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, includes forced lowering and start assist, actuated by "brake 3x", axle lift below recommended driving height, therefore no warranty for tire damage Brake system: 2-line compressed air brake system, color-coded routing for easy service, spring-type parking brake, 2 fail-safe coupling heads at front, no connecting line, EBS, electronic braking system with EBS socket at front, no connection cable, with raise & lower valve, 2 driving heights adjustable via manual knob: 1x for coupling height 980 mm, 1x for coupling height 1100 mm, ride height in combination with lift axle; when lift axle is raised, load/overall height increases by 50 mm, vehicle stability control system Wheels and tires: 435/50 R19.5, brand at manufacturer's discretion, steel rims Electrics: 24V, multi-chamber lights, yellow LED side lighting, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights: 1x each left/right in front frame, 2 additional LED work lights at rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning panels: LED-illuminated and extendable to 4,000 mm, additional 7-pin socket at rear underrun protection Floor: phenolic plywood, approx. 30 mm thick, on longitudinal beams for high point loading, suitable for forklift axle load up to max. 7,100 kg Front wall / corner stanchions: 25 mm aluminum hollow section, 1,350 mm high, steel corner stanchions in volume version, front wall inside also lined with 1,250 mm phenolic plywood, "Crash-Blocker", lower 140 mm inside with steel impact protection, storage compartment for insertable stanchions insi

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802035478, lastna masa: 4.660 kg, največja dovoljena obremenitev: 33.340 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.450 mm, skupna širina: 2.550 mm, skupna višina: 1.325 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis Semi Container Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin and two kingpin positions Front locking on tipper ram mounting bracket with positioning wedges on both sides; rear locking via continuous rotary shaft with return spring Without subframe for self-supporting containers Container mounts: Iasdpfx Aszaz Tkjicou Locking crossbeams, dual, for securing 1 x 30 ft container 24 t, two-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Free landing gear foot spacing or rear swing clearance approx. 1850 mm 2 wheel chocks with holders Side underrun protection, aluminum Without rear underrun protection Half-shell mudguards With anti-spray flaps according to EC standard Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection). Note: Tipping angle limited! Operated hydraulically via truck PTO Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles & Suspension BPW disc brake axles with 430 mm disc diameter "Axles/chassis laser-measured" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (intermodal transport) up to 44 t gross combination weight Air suspension 1st axle automatic lift axle, including forced lowering and drive-off aid, operation via "3x braking" (Drive-off aid is functional up to an axle overload of 30% and up to max. speed of 25 km/h) Brake system 2-line compressed air brake system Color-coded pipe routing for easy service Spring-actuated parking brake 2 error-proof coupling heads at the front, without connecting line 24 volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift and lower valve Vehicle stability control system Axle load detection via EBS CAN-bus signal, for display in the driver's cab. Truck must be appropriately prepared, no truck installation (not a certified scale) Wheels and Tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin error-proof sockets at front, without connecting cable Registration country / License plates Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white at sides, red at rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Landing gear: black coated

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202034509, lastna masa: 4.790 kg, največja dovoljena obremenitev: 33.210 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 12.660 mm, skupna širina: 2.550 mm, skupna višina: 1.150 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, 3-axle container semi-trailer Gooseneck Type: SDS 420 Rigid 40" Chassis Semi-trailer for containers Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions Container mounts: 1 x 20-foot centered without steel/chequer plate flooring at the rear 2 x 20-foot, 1 x 40-foot with gooseneck tunnel Front crossmember with folding locks (not available for front extension), supplied free of charge Transport of filled tank containers is excluded. No rear height adjustment and no foldable center supports, transport of container without tunnel not possible. 24 t, 2-speed landing gear, single-sided operation, with semi-round lower part for compensation Make: Jost 2 wheel chocks with holders Side underrun protection Rear underrun guard Half-shell mudguards With anti-spray flaps according to EC Rear impact guard Axles + Suspension BPW drum brake axles "Axle/chassis laser alignment" Reduces tire wear and fuel consumption Axle spacing 1310/1410 mm Air suspension Braking system 2-line compressed air brake system Colored pipe layout for easy service Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connecting line EBS make Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lifting & lowering valve Vehicle stability system Axle load detection via EBS CANbus signal, for display in the driver's cab, truck must be prepared accordingly – not installed (no calibrated scale) Wheels and tires 385/55 R22.5" Make Fulda with M+S marking Steel rims, factory silver Isdpjzazznsfx Aiceau Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable 2 additional LED work lights, rear both sides, switched via reversing light Operating instructions Note: Transport of filled tank containers is excluded! Registration country / plates Germany With Dekra inspection and certificate (according to §13 EG - FGV) Prepared for single-line number plate holder Warning plate according to ECE - 70 ADR warning plate at rear, foldable Contour marking with reflective strips according to ECE R 048, yellow on the sides and red at the rear Paintwork Frame RAL 3020 Traffic red "10-year warranty against rust-through" Landing legs black coated

Stanje: rabljeno, največja dovoljena obremenitev: 28.550 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 1.300 mm, prostornina tovornega prostora: 24 m³, Leto izdelave: 2020, Oprema: ABS, Zrak, dvig, BPW-disk, EBS, PVC polovični blatniki, sredinsko oporni pad, aluminijasta platišča, zložljiv UFS, termoizolacija, naležna zadnja stena, pohodna steza z lestvijo, PVC zadnja ponjava, PVC rolo ponjava. Iasdpfxey Dy Agj Aicju

Stanje: rabljeno, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2021, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Jeklena zadnja kiparska keson cisterna približno 50 m³, kombinirana zadnja vrata z dvojnimi krilnimi vrati z vrtečim zapahom / nihajna loputa, 2 x žitna drsnika, samodejno-mehanska 4-kaveljska zapora, HYVA kiper cilindri, rolo ponjava, podporniki, ABS, EBS, SAF INTRA CD os(i), kolutne zavore, dvižna os, zračno vzmetenje z dvižno-spuščalno napravo, stikalo za vklop/izklop za spuščanje kiperja, vozilo je lahko polepljeno z oglaševalskimi nalepkami in/ali napisano. SI86095 Iedpfx Aow Ertgoicjau Naša ponudba je načeloma brez novega tehničnega pregleda. Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno z oglaševalskimi nalepkami in/ali napisano. Veljajo naši splošni pogoji dobave in plačila. Z veseljem vam pripravimo ponudbo financiranja ali leasinga za ta predmet. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 28.933 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 101 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Edscha pomična streha * Haldex EBS, ABS, LSV * Dvižna os * Škatla za orodje * BPW Eco Plus osi z disk zavorami ----* Dimenzija pnevmatik: 385/55R19,5 * Skupna dolžina: 13.850 mm * Lastna masa: 6.067 kg * TÜV & SP: potekel -----Pridržujemo si pravico do napak in vmesne prodaje Številka vozila 5726 Iedjvhvcfjpfx Aicjau WhatsApp podpora na voljo! Za vprašanja glede vozila ali dodatne informacije nam pišite preko WhatsAppa Whatsapp Whatsapp

Stanje: rabljeno, največja dovoljena obremenitev: 28.933 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 101 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Edscha pomična streha * Haldex EBS, ABS, LSV * Škatla za orodje * BPW Eco Plus osi z disk zavorami ----* Dimenzija pnevmatik: 385/55R19,5 * Skupna dolžina: 13.850 mm * Lastna teža: 6.097 kg * TÜV & SP: potekel Iedpevhv H Rjfx Aiceau -----Napake in vmesna prodaja pridržane Številka vozila 5732 Podpora prek WhatsApp na voljo! Za vprašanja glede vozila ali dodatne informacije nas preprosto kontaktirajte prek WhatsApp

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Iasdpfxsy Ercbj Aiceu Stranski žepki za stebričke Skladiščna škatla za vstavljive stebričke

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2005, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj = Opombe = 3-osna nizkopodnožna polprikolica, prevozna. Sedežna platforma z vstopnim naklonom cca 4.000 x 2.500 mm, nizkopodnožna platforma cca 9.200 x 2.500 mm. Višina nakladanja cca 920 mm. 44 vpenjalnih ušes in obročev. Dvodelni hidravlični rampi cca 2.150+1.250 x 630 mm. BPW osi, ABS, zračno vzmetenje. Dovoljena skupna masa 41.000 kg, sedlasta obremenitev 11.000 kg, nosilnost 32.100 kg. Kraljevski zatič 2 cola, sedežna višina cca 1.050 mm. 4 zaboji za orodje. Pnevmatike 235-75R17.5. Dvocevni zračni sistem, hidravlična enota. Barva bela. = Dodatne informacije = Lastna masa: 8.900 kg Nosilnost: 32.100 kg Skupna masa: 41.000 kg Iedpfx Asyaxnfsicoau Pnevmatike spredaj: 235-75 R 17.5 Pnevmatike zadaj: 235-75 R 17.5 Za več informacij kontaktirajte Jan-Marc Schwickerta.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFL33802036539537, lastna masa: 6.320 kg, največja dovoljena obremenitev: 31.650 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.545 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19.5, stanje pnevmatik: 100 odstotek, barva: srebrn, Leto izdelave: 2025, obratovalne ure: 10 h, Oprema: ABS, Podrobnosti na prvi pogled: Isdpfx Aioy Drk Ajcjau - Iz prve roke - Mega polpriklopnik (Low Deck) - nastavljiva višina (približno 980 – 1100 mm) - možno dvigniti na standardno višino - dvižna os vključno z zagonsko pomočjo - zračno vzmetenje - ogrodje vroče pocinkano - 15 let garancije proti predrjavenju - aluminijaste nakladalne rampe (nosilnost cca 18 t) - kontejnerske ključavnice za 20’ in 40’ kontejnerje - Load-Lock profil - številne vpetne točke (zelo obremenljive) - žepki za stebričke vključno z vstavnimi stebrički - LED osvetlitev - orodjarne/skrinjice - pnevmatike 435/50 R19.5 kot nove - majhna prevožena razdalja 5-3.200 km - takoj na voljo - na voljo več enakih priklopnikov Oprema za pritrjevanje tovora, razvidna na fotografijah, ni del ponudbe! Tehnični pregled je lahko nov!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2011, skupna dolžina: 12.100 mm, skupna širina: 2.550 mm, skupna višina: 1.300 mm, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5, medosna razdalja: 9.250 mm, barva: drugo, Leto izdelave: 2011, = Additional options and accessories = - EBS = Remarks = Number of axles: 3, Payload: 36,200 kg, Unladen weight: 5,800 kg, Gross weight: 42,000 kg, Type of chassis: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, EBS, 2x 20, 1x 30, 1x 40 FT HIGHCUBE // DISC BRAKES // LIFT AXLE = Further information = General information Cab: Day cab Registration number: OL-43-HP Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre size: 385/55R22.5; Lift axle; Tyre tread left: 5 mm; Tyre tread right: 10 mm Axle 2: Tyre size: 385/55R22.5; Tyre tread left: 8 mm; Tyre tread right: 10 mm Axle 3: Tyre size: 385/65R22.5; Tyre tread left: 2 mm; Tyre tread right: 2 mm Weights Unladen weight: 5,800 kg Payload: 36,200 kg Gross vehicle weight: 42,000 kg Environment Emission class: Euro 0 Condition General condition: Very poor Technical condition: Very poor Visual condition: Very poor Damages: None = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive pricing • Honest business practices • Multilingual staff • We understand our customers • Import & transport services • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Isdpfxey U U R Hj Aicjau Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask us directly about our European warranty packages.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802035390, lastna masa: 3.160 kg, največja dovoljena obremenitev: 34.840 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 03/2027, skupna dolžina: 7.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: siv, The images shown are archive photos! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin (chassis prepared for retrofitting, collection tray, 4 x hose support, tread plates, Fliegl standard) Container mounts: - 1 x 20-foot center position (or swap body containers 7.15 / 7.45 / 7.82), non-retractable at the front, container lock twist locks in the longer version. Iodpsy Tvuwofx Aicoau - 24-ton 2-speed landing gear, single-sided operation, with semi-circular base and flat mounting plate, equipped with stroke compensation - Wheel chocks with holders - Side underrun protection - Rear underrun protection with deep step for easier access + inner tread plate - Half-shell fenders - With anti-spray mud flaps according to EC Axles & Suspension: - BPW or SAF disc brake axles, according to manufacturer’s choice, with 430 mm disc diameter - "Axle/chassis laser measurement" to reduce tire wear and fuel consumption - Offset axle spacing 1410/1310 mm (intermodal transport) suitable for up to 44t gross train weight - Air suspension - 1st axle with automatic lift, including forced lowering and traction aid, operated by "brake pedal 3x" (traction aid function active up to 30% axle overload and max. speed of 25 km/h) Braking System: - 2-line compressed air braking system - Color-coded hose routing for easy servicing - Spring-loaded parking brake - 2 foolproof coupling heads at the front, without connector hose - 24V EBS (Electronic Braking System) with EBS socket at the front, without connecting cable - Note: This trailer may only be towed by tractor units that ensure the functionality of the ABS! - Includes raise & lower valve + auto-reset function - Vehicle stability program - Axle load detection via EBS CAN bus signal, display possible in the driver’s cab if the truck is equipped accordingly, no truck-side installation (no certified scale) Wheels & Tyres: - 385/65 R22.5, brand as per manufacturer’s choice - Steel rims, factory silver Electrics: - 24V, multi-chamber LED light clusters, yellow LED side marker lights, LED license plate illumination (Note: on certain tractor units, fault messages may occur even though all functions are working) - 2 white LED front position lights - 2 white/red LED lane marker lights at the rear - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connecting cables - Additional LED work lamp at the rear, controlled by the reversing light Operational Notes: This vehicle may only be loaded with 20’ tank containers compliant with ISO 668 and especially ISO 1496-3! The tank containers must have end-load-transfer areas ("end cross member load transfer areas")! Country of Registration / Plates: - Germany - With Dekra inspection and certificate (according to §13 EC-FGV) - 24/7 service hotline - Prepared for single-line license plate holder - Warning panel according to ECE-70 - Contour marking with reflective tape in accordance with ECE R 048, white on the sides, yellow at the rear The images shown are archive photos! The vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802030369, lastna masa: 31.110 kg, največja dovoljena obremenitev: 34.889 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, naslednji pregled (TÜV): 01/2027, skupna dolžina: 7.390 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rdeča, The images are archive photos; the vehicle may still be in use! Fine-grain steel welded construction, kingpin plate with exchangeable 2" kingpin, container mounts: 1 x 20-foot container (centered) or swap body container 7.15 / 7.45 m, front not retractable, extended version twist locks for container securing. 24-ton, 2-speed landing gear, one-sided operation, with straight lower section, without compensating ram. Wheel chocks with holders, side underrun protection, aluminium rear underrun protection, with anti-spray mudflaps according to EU regulations, stainless steel (VA) drip tray with 1 1/4-inch drain pipe + 1 1/4-inch shut-off valve, including drip plate, with perforated step plates approx. 400 mm wide, left & right between drip tray and longitudinal frame. Hose trays approx. 4500 mm long (incl. hose compartment) for pipe holders 2 x DN 200 external + 2 x DN 160 centered, rear hose compartment (VA steel) 300 mm deep, splash-proof, lid (VA steel) all around with rubber seal, with drain hole at lowest point, then lidless on hose pipes, stainless steel grounding lug rear in FR-right on frame with international grounding sticker on frame, rear right rear access steps on underrun protection, at main frame rear outer FR-right: step plate approx. 260 mm long and 300 mm wide. Axles & suspension SAF disc brake axles, "axle/chassis laser aligned" to reduce tire wear and fuel consumption, staggered axle spacing 1410/1310 mm (combined transport) up to 44 tons GCW. Air suspension, first axle automatic lifting axle, including forced lowering and start assist, operated via "3x brake activation" (start assist operable up to 30% axle overload and speeds up to max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy service. Spring-loaded parking brake. 2 non-interchangeable coupling heads at front (without connecting line), EBS electronic braking system with EBS socket at front (without connecting cable). Note: The trailer must only be towed by tractor units that ensure proper ABS functionality! With raising and lowering valve, vehicle dynamic stability control. Axle load detection via EBS CAN-bus signal, for display in the driver cab (truck must be pre-equipped, no truck installation). Wheels & Tyres 385/65 R22.5, manufacturer’s brand of choice, steel rims, factory silver. Electrics 24 volt, multi-chamber tail lights, side yellow LED lighting, 2 white position lamps at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin socket at the front (without connecting cable). Operating Notes The total permissible weight stated is technically possible; however, depending on the load, the total weight may not be achievable while adhering to permissible axle, kingpin and saddle loads (poor handling may result from incorrect load distribution). This vehicle must only be loaded with 20’ tank containers compliant with ISO 668 and specifically ISO 1496-3! The tank containers must have "end-load-transfer areas". Iaedoy Tvphepfx Aicsu Approval/Country/Signs Warning sign according to ECE-70, ADR inspection as per 9.1.1.2 of ADR, EX/II, EX/III, approval certificate for vehicles transporting certain dangerous goods (ex. B3), with warning sign at the rear (not valid for substances according to UN 0331 and 0332 – explosives B-E), contour marking with reflective strips as per ECE R048, white at sides, yellow at rear.

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Vehicle is from current production - available in approx. 2 weeks Vehicle / Body: Tipping Trough Gross Weight: 35,000kg / 39,000kg Unladen Weight: 5,500kg !!! Payload: 29,500kg / 33,500kg Total Length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Coupling height approx. 1,200mm Chassis – Semi-Trailer Tipper: - Fine-grained steel welded construction, basic lightweight design - 1x centre support leg - Folding underrun protection - Underrun protection with "spring assistance" for easier operation - Half-shell mudguards - Integrated “mudguard holder” with a stone-repellent surface - With antispray mud flaps only on the rear axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - “Axle/chassis laser measured" for reduced tyre wear and fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted front on curved chassis - 1st axle is an automatic lift axle, also electrically operable from the truck, including forced lowering and start-off assist, without truck installation (start-off assist is functional up to 30% axle overload and up to a max. speed of 25 km/h) Braking System: - 2-line compressed air brake system Coloured line routing for easy servicing. - Spring-actuated parking brake - 2 front foolproof coupling heads, without connecting line - 24 volt EBS, Electronic Braking System with EBS socket at the front, without connection cable - With raise & lower valve - Vehicle stability control system - Automatic tip lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5" European brand, manufacturer’s choice Electrics: - 24 volt, multi-chamber LED lights, side yellow LED marker lights, number plate illumination in LED (Note: with some tractors, diagnostic errors may occur even though functions are correct) Side yellow LED lighting linked with indicator - "flashing side marker lights" - Premium LED side marker lamps, each with 20 LEDs per unit - 2 white front position LED lights included - 2 white/red lane control rear LED lights included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, no connection cables - LED working lights mounted on both sides (activated via reverse light) - 2 additional LED work lights recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm - Hyva make - Operated hydraulically via truck PTO - Hydraulic connection with hose and vehicle plug NW = 54 mm with large wing nut Tipping Body: HARDOX steel round trough in “Stone Master Design” of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Interior with ladder at front wall - Greenline – conical, aerodynamic body design - Shovel and broom holder on exterior front wall - "Membrane" tailgate - Tailgate as pendulum flap with "double-joint hinge", externally mounted with dual hook lock. 2 clamping bolts with toggle locks at the bottom on each side - Tailgate with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear- and weight-optimised structure - Fliegl S.T.E.P. – swivelling platform at front with folding ladder for side access LH side, Iaodpfx Asvhyf Rjicsu

Stanje: rabljeno, največja dovoljena obremenitev: 33.787 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2017, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, skupna širina: 2.550 mm, Skupna teža: 39.000kg/35.000kg Lastna teža: 5.213kg Nosilnost: 33.787kg/29.787kg Skupna dolžina: 8.200mm Nakladalna dolžina: 7.200mm Širina: nakladalna širina 2.350mm / skupna 2.550mm Dodatne informacije: - Notranja višina kesona 1.450mm - Prostornina: 24,5 m³ - Višina pripenjanja: 1.200mm - Palica za ponjavo z nosilcem - BPW osi - Zračno vzmetenje - Jeklen okrogel keson v obliki kadi - Zadnja stena kot nihajna loputa - Ploščad s stopniščem - Enostranska rolo ponjava Iaedpfjycbi Rox Aicsu Vozilo je lahko polepljeno in/ali označeno z reklamami.

Stanje: novo, največja dovoljena obremenitev: 25.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Total weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Overall length: 21,000 mm Loading length: Platform internal length approx. 13,500 mm / max. loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Additional Information: New vehicle from ongoing production, available from approx. calendar week 8/2026 Rear telescopic support 4 wheel chocks with holders 4 pairs of flush-mounted container locks in the floor for 1 x 40 ft. container or 2 x 20 ft. containers Iaodpfx Ajumha Neiceu 1 spare wheel carrier for 1 spare wheel, including wheel fixing kit, basket type design 11 pairs of stake pockets set into the outer frame, suitable for FR insertable stakes 80x50 mm, flush-mounted in the outer frame, with opening for lashing strap or chain attachment 20 insertable stakes, W=80 / D=50 / L=1500 mm 1 plastic toolbox 3 pairs of lashing eyes, each with 3.5 t capacity, embedded in the side frame – in the neck section 13 pairs of folding lashing rings, each 10,000 daN, freely pivoting in the side frame profile (also suitable for oversize load securing) 1 pair of folding lashing rings, each 10,000 daN, installed laterally in the intermediate support Air suspension with raising and lowering 1st axle automatic lift axle, additionally with forced lowering including start assist with control button on semi-trailer, no cab operation with raising & lowering valve + auto-reset function Wheels and tyres 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights in LED 2 white/red rear contour lights in LED 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, activated by reverse light 1 removable rotating beacon on the underrun guard 1 x 7-pin socket at rear 6 side sockets, 2x front bulkhead, 2x support legs, 2x rear end (left + right) 7-pin 2 work lights, recessed in the upper front wall incl. switch 2 pairs of overwidth boards, each with 2 LED marker lights per board, laterally extendable to 3,500 mm, additionally pluggable onto loading area (infinitely adjustable width) Fixed steel front wall 1,200 mm high, with robust steel corner posts without corner chamfer, side straight loading 2 lashing holes top inside and outside in the upper front wall corners Chassis front hot-dip galvanized + outer frame visible area Final painted in RAL 3002 Carmine Red Chassis rear hot-dip galvanized + outer frame visible area Final painted in RAL 3002 Carmine Red Front wall RAL 3002 Carmine Red

Stanje: novo, največja dovoljena obremenitev: 34.310 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Vehicle / Superstructure: Trailer Container Chassis Semi-Trailer Unladen weight: 3,690 kg Overall length: 13,500 mm Width: 2,520 mm Iaedek N Acuopfx Aicsu Fifth wheel height approx.: 1,120 mm Further information - 3-axle - Frame hot-dip galvanized incl. passivation - 1 x 45 ft with long gooseneck tunnel and angled front corners - 24 t 2-speed landing gear, single-sided operation - Side underrun protection aluminium, rear underrun protection galvanized steel, rear underrun protection extendable for 45 ft container - Plastic toolbox - Air suspension - 1st axle automatic lift axle - Tyres: 385/55 R22.5 - 2x 7-pin and 1x 15-pin electrical sockets at the front From ongoing production

Stanje: novo, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Iaedpfx Ajut Idnjicju Width: 2,520 mm Loading height: 900 mm Further information Chassis: Low-bed semi-trailer Steel welded structure, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Rear support foldable 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mudflap Mud flaps with anti-spray in front of the 1st axle and behind each axle, in accordance with EU regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width to 3,000 mm (not at the rear taper) (Note: The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess over rear axles, extending to the rear, approx. 3,000 mm long, 650 mm wide, and 230 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess on side of main frame, approx. 300 mm from front and some 200 mm before rear taper Lashing points low-loader 11 pairs of lashing mushrooms, integrated top and side of the outer frame, each 10t 2x on gooseneck 9x distributed on load floor 2 pairs of lashing eyes front on gooseneck, each 5t 3 pairs of swivel lashing eyes on gooseneck, each 5t 2 pairs of folding lashing eyes additionally embedded in load floor, each 10t 1x at beginning of load floor 1x at end of rear taper 1 pair of preparation on the slope from gooseneck for 6.7t screw-on lashing eye (JDT) 8 pairs of ring lashing eyes recessed in outer frame, each 5t (convertible to stanchion pockets) 1 pair screw-on lashing eyes, each 6.7t (JDT), with large flange plate incl. thread as counternut Axles & suspension SAF or BPW drum brake axles, manufacturer's choice “Axle/chassis laser alignment” to reduce tire wear and fuel consumption Last axle is self-steering, with automatic reversing lock via reversing light and additional manual lock function via push button on vehicle Air suspension Wheels and tires 235 / 75 R 17.5" Manufacturer's choice Steel rims, twin configuration, factory silver Braking system 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake 24 Volt EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor units that ensure effective ABS functionality! 2 coded coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN-bus signal, for display in cab, truck must be appropriately equipped, no truck installation (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system according to ECE R 141, display in tractor cab via EBS, truck installation required Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to indicator "flashing side markers" 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin coded sockets at front, without connecting cable 1 LED revolving beacon

Stanje: novo, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Low Loader Semi-Trailer with Ramps, Type SDS 470 T Gross Weight: 41,000 kg / 47,000 kg Unladen Weight: 8,900 kg Payload: 32,100 kg / 38,100 kg Overall Length: 13,300 mm Loading bed: 9,200 mm Iedpfok N Aflex Aicsau Ramps: 2,800 mm x 750 mm with spring assist Air suspension Excavator arm recess Large lashing package 70 mm hardwood flooring SAF axles, 3rd axle self-steering Plus pre-carriage / provision ex stock Wiesmoor €1,280.00 net Vehicle available immediately from stock. Hire purchase offer: Term 48 months, 40% residual value, down payment VAT only. Monthly installment EUR 999.00 (net only)