Polpriklopnik kiper

FLIEGL DHKS 390, Stahl, 50m³, Schrottmulde, TOP-Zustand

Stanje: rabljeno, največja dovoljena obremenitev: 34.725 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2025, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape" First registration 10/2024, condition like NEW Dimensions (internal, LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight only 7,275 kg Z-chassis dropped version Floor made entirely of 5 mm Hardox steel HB450 Front wall and sidewalls 4/3 mm Hardox steel HB450 Inclined front wall, interior access ladder Twin-leaf portal doors, pneumatic secondary release 1 GRAIN SLIDE in the right door leaf Heavy-duty reinforced sliding roof, CENTRAL LOCKING HYVA tipping cylinder, Alpha type, suitable for high and low pressure Full-load ALU landing legs 2x air vibrators mounted beneath the body SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE with starting aid WABCO Trailer EBS with RSS roll stability support Iedovuhcqepfx Ab Uetr WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on right side 4x LED reversing lights RENTING is the new BUYING—now also available from us as FULL-SERVICE-RENTAL and ready for immediate delivery.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Itedpfxsgcw Rmo Ab Uer Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: rabljeno, največja dovoljena obremenitev: 28.240 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2013, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.400 mm, prostornina tovornega prostora: 50 m³, Leto izdelave: 2013, Oprema: ABS, Air, lift, MB disc, EBS, aluminum rims, drop-down landing legs, access ladder, PVC half-shell fenders, folding underrun protection, trough made of HB 450 steel with 4 mm floor, side walls 3.2 mm thick, split rear wall (1/2 + 1/2), ladder and catwalk, tarp frame, loading pressure gauge, 2x toolboxes, sliding tarp with central locking Iedpfxeuwhruo Ab Ujtr

Stanje: rabljeno, lastna masa: 5.600 kg, največja dovoljena obremenitev: 25.900 kg, skupna masa: 31.500 kg, konfiguracija osi: 2 osi, prva registracija: 10/1993, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.340 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 19 m³, skupna dolžina: 2.500 mm, skupna širina: 3.100 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, barva: siv, prevoženi kilometri: 1.001 km, vrsta goriva: dizel, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, aluminijasta nadgradnja, 2 osi, BPW osi, zračno vzmetenje, rolo ponjava, pohodna pot, preklopna zaščita, izpustni žleb. Ijdovhhm Aopfx Ab Ustr Nadgradnja: aluminijasti zloženi keson cca 19m³ PODATKI O OPREMI BREZ JAMSTVA, pridržane spremembe, vmesna prodaja in napake!

Stanje: rabljeno, prevoženi kilometri: 351.885 km, moč: 294 kW (399,73 KM), prva registracija: 12/1996, vrsta goriva: dizel, lastna masa: 11.800 kg, največja dovoljena obremenitev: 14.200 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315 / 80 R 22,5, konfiguracija osi: 6x2, medosna razdalja: 4.200 mm, zavore: stalna plinska ročica, barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: euro2, vzmetenje: zrak, število sedežev: 2, skupna dolžina: 2.500 mm, skupna širina: 3.250 mm, Oprema: ABS, kabina, spojka prikolice, Vehicle location: Bovenden, company premises, 1x air-suspended driver's seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, 16-speed gearbox, ABS (anti-lock braking system), constant throttle, air suspension, trailer coupling with air, electrical & hydraulic connections, red environmental badge. Wheelbase: 4200 mm Superstructure: Marrel hooklift MA 26.70 for 6.5 m containers Front axle wheels: 385 / 65 R 22.5 6-cylinder turbo engine!!! Converted to 6x2 configuration. Itsdpfx Aevhg Rysb Uer ACCESSORY INFORMATION WITHOUT GUARANTEE, Subject to changes, prior sale, and errors!

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release. Ijdpfogcw Riex Ab Ujtr

Stanje: rabljeno, prevoženi kilometri: 707.298 km, moč: 368 kW (500,34 KM), prva registracija: 08/2013, vrsta goriva: dizel, lastna masa: 12.500 kg, največja dovoljena obremenitev: 14.000 kg, skupna masa: 26.500 kg, velikost pnevmatike: 315/80 22,5, stanje pnevmatik: 50 odstotek, konfiguracija osi: 6x2, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, Leto izdelave: 2013, obratovalne ure: 707.298 h, velikost sprednje pnevmatike: 315/80 22,5, velikost zadnje pnevmatike: 315/80 22,5, število postelj: 1, Oprema: ABS, drsna vrata, kabina, klimatska naprava, meglenke, parkirni grelec, računalnik na krovu, registracija tovornjaka, spojka prikolice, tempomat, zapora diferenciala, Reference number for inquiries: 40183 Scania, R 500 * Year of manufacture: 2013 * ABS, Anti-lock Braking System * Trailer coupling * EBS, Electronic Braking System * Electric window lifters * Cab * Air conditioning * Air suspension * Lift axle * Power steering * Sleeping berth * Heated seat * Auxiliary heater * Cruise control * On-board computer * Differential lock * Duomatic air couplings * Spare wheel carrier with spare tire * Lifting and lowering device * Storage box/toolbox * Digital tachograph * Radio CD * OBU preparation * Refrigerator * Electric windows & mirrors * AdBlue tank * Fog lights * Comfort air suspension seat * Multifunction steering wheel * Sun visor * Transmission: Automatic * Suspension: Leaf/Air * Gross weight: 26,500 kg * Curb weight: 12,500 kg * Payload: 14,000 kg * Permissible total weight: 26,500 kg * Tire condition 1st axle: 60% -- 60% - Tire size: 315/80 R22.5 * Tire condition 2nd axle: 80%|80% -- 50%|50% - Tire size: 315/80 R22.5 * Tire condition 3rd axle: 40%|40% -- 40%|40% - Tire size: 315/80 R22.5 * Tire size: 315/80 R22.5 * Body: Meiller RK20.65 Disclaimer: Subject to change, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive services include for example: * Purchase/sale/rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export and customs license plates * Vehicle preparation: new tarpaulins, lettering, painting etc. * Professional loading and load securing * TÜV approval, registration service Itodpfsxpc Rujx Ab Usr * Transport of commercial vehicles Ask our trained personnel, we are happy to advise you.

Stanje: rabljeno, največja dovoljena obremenitev: 32.400 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2021, dolžina tovornega prostora: 13.110 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2021, Oprema: ABS, STAS 3-osovinski HardoX čelični kiper 86 m³ Prva registracija 09/2021 Prikolica oštećena u nezgodi, ali pokretna Dimenzije unutrašnje (D x Š x V): 13.110 x 2.350/2.450 x 2.770 mm (konusni oblik) Prazna masa: 9.640 kg Ijdsx E Ixrjpfx Ab Uetr Pod od 5 mm HardoX čelika HB450 Prednji i bočni zidovi od 3 mm HardoX čelika HB450 Pneumatski sklopivi zadnji zaštitni bran Prav zid na prednjoj strani, sa unutrašnjim pristupom Zadnja portanska vrata 50:50, pneumatsko naknadno otključavanje Krovna rolo cerada, ojačana verzija HYVA kiper cilindar tip Alpha, niskopritisni 2x pneumatska vibratora JOST ručne podporne noge za punu nosivost SAF osovine sa velikim disk kočnicama, 430 mm Prva osovina podizna WABCO Trailer-EBS sa sistemom protiv proklizavanja RSS WABCO Smartboard Uređaj za podizanje i spuštanje Automatsko spuštanje prilikom kipovanja Gume 6x 385/55 R 22.5 ALCOA aluminijumske felne Dura-Bright visokog sjaja Aluminijumske pristupne merdevine Držač za lopatu i metlu Kutija za alat levo 4x LED rikverc svetla NAJAM je nova kupovina – kod nas dostupno odmah kao full-service najam -----

Stanje: rabljeno, številka stroja/vozila: YB44020339L040223, konfiguracija osi: 3 osi, prva registracija: 09/2009, skupna dolžina: 11.620 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65, stanje pnevmatik: 30 odstotek, medosna razdalja: 9.310 mm, barva: drugo, Leto izdelave: 2009, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje - Kolutne zavore = Opombe = Itodpoxgg Tzefx Ab Usr Struktura Prostornina: 56 m3 = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 385/65 Znamka osi: Mercedes Profil pnevmatik: 30 % Zadnja os 1: Največja osna obremenitev: 9.000 kg Zadnja os 2: Največja osna obremenitev: 9.000 kg Zadnja os 3: Dvižna os; Največja osna obremenitev: 9.000 kg Teže Lastna masa: 10.400 kg Nosilnost: 29.600 kg Največja dovoljena masa: 40.000 kg Identifikacija Registrska številka: OK-40-XS

Stanje: rabljeno, lastna masa: 8.600 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, prostornina tovornega prostora: 60 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Oprema: ABS, Stas FSS Ferrostar 60m³ steel tipper body | ABS / EBS | SAF axles | Disc brakes | Lift axle | Tyres: 385/65 R 22.5 | Front platform | Rear portal doors | Rolling tarpaulin | Lift-lowering system | Suspension: lift / air / air | Sidewalls and floor made of Hardox 450 | LED work lights | Rear underride protection, foldable | Loading dimensions: | Length: approx. 11,000 mm | Width: approx. 2,430 mm | Height: approx. 2,280 mm | Volume: 60 m³ | Unladen weight: Itsdpfxowwld As Ab Ujr