Faymonville Max Trailer 3-Achs-Tiefbett Mit Pendelachsen nakup rabljenega (54.136)

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm Nsdpsx Nli Nefx Ab Delg * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting Njdpfxex Nlkae Ab Delg ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: rabljeno, največja dovoljena obremenitev: 27.199 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2013, dolžina tovornega prostora: 13.310 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.640 mm, prostornina tovornega prostora: 86 m³, Oprema: ABS, * 5412 – identifikacijska številka vozila za telefonska povpraševanja * Tip: SKO 24/L - 13.4 FP 60 COOL * ABS, EBS, osi Schmitz, diskovne zavore, zračna vzmetitev za dvigovanje in spuščanje, dvižna os, orodjarna, portalna vrata, dvonadstropna izvedba z nosilci * Carrier Maxima 1300, dizel (delovanje motorja 4.648 ur), električni pogon (delovanje v rezervnem načinu 3.326 ur), -30 °C / +30 °C * Gume 1. os: 385/65R22,5 (4 / 7 mm) * Gume 2. os: 385/65R22,5 (3 / 8 mm) * Gume 3. os: 385/65R22,5 (9 / 3 mm) Nsdpfxjxth R Ie Ab Djlg ----naš e-poštni naslov: naša storitev za vas: - ureditev začasnih ali carinskih registrskih tablic - transport / dostava po vsej EU - carinsko odpravljanje vozil v tretjo državo Whatsapp za angleščino, nemščino, ruščino in druge jezike:

Stanje: novo, lastna masa: 5.680 kg, največja dovoljena obremenitev: 18.320 kg, skupna masa: 24.000 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 r17,5, Leto izdelave: 2026, Oprema: ABS, Three-axle trailer BPW low-loader axles Electronic air suspension with 2 ride heights Lowering function for safe loading Brake system compliant with EC regulations with 2S/2M Drawbar with 50 mm towing eye Raising and lowering of the drawbar 8 pairs of 10 t lashing rings recessed in the low-bed 6 pairs of 2 t lashing points above wheel cutouts 5 pairs of 3 t lashing/pocket sockets for 90x50 mm stanchions Nlsdpfx Aboh I H Dds Djg 50 mm softwood floor Chassis frame hot-dip galvanized by immersion bath Foldable side underrun protection Stanchion pocket package in outer frame One-piece hot-dip galvanized access ramps Laterally adjustable Direct-acting vertical spring supports

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.100 kg, največja dovoljena obremenitev: 27.400 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, barva: srebrn, Leto izdelave: 2007, Oprema: ABS, Prikolica s rezervoarjem za živila BODEX KIS 35,5T Letnik 2007 Največja dovoljena masa 35.500 kg Nsdjzzxdhopfx Ab Djlg Lastna masa 8.100 kg Nosilnost 27.400 kg Ogrevanje Tri ločeni prostori v notranjosti 3 osi JOST 1 dvižna os ABS Nosilec za rezervno kolo Tehnično in vizualno stanje je zelo dobro. Popolna dokumentacija.

Stanje: rabljeno, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2014, naslednji pregled (TÜV): 04/2027, MÖSLEIN 3-osni nizkotovorni priklopnik z rampo, tip TF 3 Okvir, v celoti pocinkan. Skupna dolžina: 10.300 mm Nosilna plošča: 5.900 mm Višina nosilne plošče: 860 mm Skupna teža: 24.000 / 30.000 kg Lastna teža: 6.000 kg Nosilnost: 18.000 / 24.000 kg Parabolična vzmetitev Dolge rampe z vzmetnim dvigalom Njdozuiz Rspfx Ab Dslg Stransko premikljiv Velik komplet pritrdilnih elementov Žepi za pritrditev na zunanjem okvirju Vlečna kljuka 40 mm Električni priključek, 15-polni Zračni priključek Duomatic Vehikel je na voljo takoj – na voljo so tudi drugi novi in rabljeni 3- in 4-osni nizkotovorni priklopniki.

Stanje: rabljeno, številka stroja/vozila: XNJ31N5S614L0xxxx, Leto izdelave: 2015, Prosimo, navedite referenčno številko na povpraševanju: 23644 Specifikacije: Model 2015 Pred prodajo bo opravljena EU-homologacija Zadnja EU-homologacija do: 24.02.26 3 osi Pnevmatike (glejte slike) Raztegljiv do 6 metrov Stopnja 1: 4,109 m Stopnja 2: 4,214 m Stopnja 3: 4,765 m Privezne točke Vtičnice za stebre Zadnje luči Dobavljeno pripravljeno za uporabo Opis: Na voljo imamo nizek polpriklopnik Broshuis iz leta 2015 s tremi osmi in izvlečnim delom do 6 m. Priklopnik bo pred prodajo pridobil EU-homologacijo in naj bi bil po navedbah lastnika v brezhibnem stanju. Dobavljeno pripravljeno za uporabo. TÜV: Ne EU-homologiran do: 24.02.2026 Lastna teža: 13.200 kg Skupna teža: 50.000 kg Nosilnost: 36.800 kg Širina: 255 cm Dolžina: 1.334 cm Model: 3-osni nizkopodložni polpriklopnik z izvlečnim delom 6 m = Dodatne informacije = Nlsdpfszqm R Ijx Ab Djg Za več informacij kontaktirajte ATS Norway.

Stanje: rabljeno, prva registracija: 10/2014, skupna masa: 27.000 kg, lastna masa: 5.100 kg, barva: siv, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2014, največja dovoljena obremenitev: 21.900 kg, naslednji pregled (TÜV): 03/2027, vzmetenje: jeklo, velikost pnevmatike: 265/70 R19.5, velikost sprednje pnevmatike: 265/70 R19.5, velikost zadnje pnevmatike: 265/70 R19.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Müller Mitteltal remorque 3 essieux pour conteneurs à benne basculante TM 2 24,0 * Conçue pour 2 conteneurs/bennes de 12 m³ chacun * Timon pneumatique abaissable pour chargement frontal * Point d'arrêt réglable pour la fixation du conteneur * Arrimage manuel avec cliquets * Plancher étanche * Essieux BPW * Suspension à lames * Châssis/cadre galvanisé * Freins à tambour * Plaques d'usure Njdpfx Abozbbbdo Dolg * Phares additionnels * 7 anneaux d'arrimage par côté montés à l'extérieur * Grande caisse à outils * Poids : PTAC - 27 000 kg, Poids à vide - 5 170 kg, Charge utile - 21 830 kg * Véhicule allemand avec papiers allemands !! * 1ère main !! * 1ère mise en circulation : 21.10.2014 * Contrôle technique valable jusqu'à 03/2027 * Contrôle sécurité valable jusqu'à 09/2026 * VIN : WMM00000E0058208 Sous réserve de vente préalable, erreurs et modifications ! Les logos d'entreprise ont été supprimés de certaines photos – merci de demander ! Aucune garantie sur le fonctionnement des équipements supplémentaires ! Contact : Christoph Ott Tél. + WhatsApp :

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) Nljdpoy Auhusfx Ab Dsg * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: rabljeno, največja dovoljena obremenitev: 34.440 kg, skupna masa: 46.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/1999, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 46.500 kg Lastna masa: 12.060 kg Nosilnost: 34.440 kg Skupna dolžina: 13.550 mm - 26.550 mm Širina: 2.550 mm Dodatne informacije: - 3 osi, hidravlično prisilno krmiljenje - priključek za nadstandardno dolge tovornjake - palica za pritrditev rampe - priključni elementi za nakladalno površino - dvojna teleskopska konstrukcija, raztegljiva do 26.550 mm - orodjarna na prikolici Nlsdpfxeycpbno Ab Dsg - električno vodeno kolo - možnost namestitve dodatnih širitev - hidravlična funkcija za dodatno krmiljenje, upravljanje na daljavo - velik komplet pritrdilnih pasov - lastna hidravlična črpalka Na voljo so tudi drugi novi in rabljeni prikolice za nadstandardne tovore. Dodatne informacije najdete na:

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading platform length 9,000 mm, loading height loaded approx. 900 mm, 20 lashing rings each 10 t, 16 stake pockets in the outer frame, drive-on ramps (approx. 3,000 x 750 mm), drive-on ramps laterally adjustable, spring lift for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tensioning straps, contour marking according to regulations, spring-loaded parking brake, chassis hot-dip galvanized, Surcharge for: - Warning panels with lighting and beacon = Price: €800 - Widening to 3 m = Price: €1,100 Nledpsz A Uyfjfx Ab Dsg - Hydraulic one-piece ramps €500 Also available with 8.10 m platform length + widening in stock. -- Subject to misprints, errors and changes. Sample images. -- More data at: ! More details: !

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 840 kg, največja dovoljena obremenitev: 2.660 kg, skupna masa: 3.550 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.550 mm, širina tovornega prostora: 2.120 mm, Leto izdelave: 2024, Prikolica za prevoz avtomobilov Grodex / 3 osi / 2024 Letnik 2024 Tehnični podatki Bruto teža 3500 kg Lastna teža 840 kg Nosilnost 2660 kg Nledpfszxwzajx Ab Djg Dimenzije Dolžina platforme 855 cm Širina platforme 212 cm Dolžina rampe 250 cm 3 osi Tehnično in vizualno stanje je odlično. Prikolica je registrirana.

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, cargo area length: 6,500 mm. Tyre size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: . Leaf suspension. 3-axle low-bed trailer with drop-bed DTS-S 300 - Turntable with robust ball bearing ring - Rear supports, foldable - 1 spare wheel carrier for 1 spare wheel, incl. wheel mounting kit - 1 spare wheel, same brand and type as main tyres, steel rim Nsdetcwkropfx Ab Delg - 1 plastic toolbox - Extendable load width up to 3,000 mm (not in rear slope) - Storage compartment for timber planks in the centre of the low-bed platform - Timber planks, 70 mm, for widening to 3,000 mm Tie-down points on low-bed: - with spring-loaded lifting aid Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Braking system: - Dual-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 Volt, multi-chamber lights, yellow LED side lights - 1 LED beacon with mounting bracket, controlled via parking light (removable beacon) - 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor: - Storage box recessed into drive-up angle at the drop bed - Then 70 mm softwood floor, steel/chequer plate covering in wheel arch area - Rear slope with 70 mm softwood floor Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, covered with wood - 1 pair of ring lashing eyes recessed front in drop bed, 10 t - 4 pairs of lashing holes in rear area, 5 t each for tensioning strap hooks - 7 pairs of lashing points recessed top and side in outer frame, 10 t each (1 x front in drop bed, 6 x in low bed) - 5 pairs of stanchion pockets recessed in outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes for extra cost) - 2 additional pairs of folding lashing eyes, 10 t each, 1 x front in drop bed, 1 x behind 3rd axle Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation

Stanje: rabljeno, največja dovoljena obremenitev: 27.206 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2010, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.310 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, Oprema: ABS, * 7861 – ID vozila za telefonska povpraševanja * Tip: SKO 24/L – 13.4 FP 60 COOL * ABS, EBS, osi Schmitz, kolutne zavore, zračna vzmetenje (dvigovanje in spuščanje), dvižna os, predal, portalna vrata, dvonadstropna konstrukcija z nosilci * Carrier Maxima 1300, dizel (ENG 5972 ur), električni pogon (SBY 5.243 ur), -30 °C / +30 °C * Kontenjer je oblepljen s folijo / oglasom! * Pnevmatike 1. os: 385/65R22,5 (3 / 4 mm) * Pnevmatike 2. os: 385/65R22,5 (7 / 6 mm) * Pnevmatike 3. os: 385/65R22,5 (8 / 8 mm) Nsdsxth Rnepfx Ab Dslg ----naš e-poštni naslov:     naša storitev za vas:       - pridobitev začasnih ali carinskih registrskih tablic       - prevoz / dostava po vsej EU       - carinski postopki za vozila v tretje države WhatsApp za angleščino, nemščino, ruščino in druge jezike:

Stanje: rabljeno, največja dovoljena obremenitev: 2.570 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, prva registracija: 09/2026, naslednji pregled (TÜV): 09/2028, * 6000678 – ID vozila za telefonska povpraševanja * Proizvajalec: Vlemmix, tip: 35VR1535 * 3,500 kg, prikolica s tremi osmi * Prazna teža: 930 kg * Nosilnost: 2.570 kg * Notranje mere (D x Š x V): 480 x 180 x 34 cm * Pnevmatike: 195/50 R 13 C * Višina nakladalne površine: približno 34 cm * Jeklen okvir, vroče pocinkan Nodszzuw Dspfx Ab Djlg * perforirana jeklena rampa za natovarjanje, 132 cm * 18 pritrdilnih točk * 3 osi, vsaka s kapaciteto 1.500 kg * Prikolica je trenutno še registrirana! * Dostava je možna po celi državi na zahtevo! ----naš e-poštni naslov:     naša storitev za vas:       - Pridobitev začasnih ali carinskih registrskih tablic       - Prevoz / dostava po vsej EU       - Carinsko odpravljanje vozil v tretjo državo Whatsapp za angleščino, nemščino, ruščino in druge jezike:

Stanje: rabljeno, največja dovoljena obremenitev: 36.515 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, naslednji pregled (TÜV): 05/2027, Oprema: ABS, Izvod opreme: V-priklop: V-priklop s poševnimi robovi, spredaj pribl. 45° in zadaj pribl. 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN). Tla iz trdega lesa, debeline pribl. 30 mm. Platforma z raztegljivo izvedbo: Platforma z raztegljivo izvedbo in zadaj poševnimi robovi pribl. 1.000 mm x 8°. 5 parov pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 5.000 daN). 3 pari pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno na sprednjem delu platforme (LC 10.000 daN). Tla iz trdega lesa, debeline pribl. 48 mm, nad osmi rebrasto jeklo. Osi: Osi BPW in vzmetenje, vse osi so hidravlično-mehansko prisilno usmerjene. Tehnična obremenitev osi: 12.000 kg na os. Zračno vzmetenje z ventilom za dvig in spuščanje. Orodje za osi. Pnevmatike: Pnevmatike 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) – znamka po naši izbiri. Podporne noge: JOST podporne noge (mehanske) z 2-stopenjskim menjalnikom za pribl. 24 t nosilnosti (pribl. 50 t testna obremenitev). Zavorna sistema: Zavorna sistema v skladu z direktivami EU s sistemom EBS-E (2S2M) brez povezovalnih vodov do vlečne enote. Lakiranje: Odlična in dolgotrajna protikorozijska zaščita standardno peskanega jeklenega okvirja, zagotovljena s 2-komponentno (2K) osnovo z večjo vsebino cinka. Kakovostno 2-komponentno (2K) končno lakiranje v eni barvi, RAL 3002, karminska rdeča. Zadnji del je metaliziran in lakiran v RAL 9010 (čista bela). Metalizirano lakiranje ni mogoče. Jeklena konstrukcija: Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa). Električna napeljava: Električna napeljava v skladu z direktivami EU, razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX na sprednji priključni plošči z vtičnicami 24N, 24S in 15-polna. Priključek v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098. Vključeno naslednje dodatne opreme: - 2-palčni kraljevi zatič - pocinkana jeklena sprednja plošča, pribl. 400 mm visoka - rumeno-rdeče zračne spojke na pocinkani sprednji priključni plošči - 4 klini z nosilci na sprednji plošči (± 5 kg) - nosilec za rezervno kolo pred sprednjo ploščo - elektro-hidravlična agregat (± 45 kg) - dodatno krmiljenje od spredaj in zadaj s kabelskega daljinskega upravljalnika preko gumbov, z nadzorom enoslednosti osi (brez vgradnje v vlečno enoto) Nsdpfx Abezqiiae Delg - nosilec na zadnjem delu V-priklopa za aluminijaste rampe - evropske odsevne table (rdeče-rumene) na zadnjem delu prikolice - rumen odsevni trak v skladu z direktivami EU na straneh, na raztegljivi platformi in na zadnji strani prikolice - na V-priklopu in zadnji plošči, na levi in desni strani, po en nosilec za opozorilne table, vključno z vtičnico - nosilec za okroglo luč na zadnji strani prikolice - pocinkani zložljivi nosilci pod poševnino platforme - odbijač blata na zadnji strani prikolice - priročnik in opis na USB-pomnilniku - nalepka za omejitev hitrosti 80 km/h na zadnji strani in na obeh straneh - manometer za obremenitev osi, za ugotavljanje obremenitve osi, vključno z diagramom obremenitve.

Stanje: rabljeno, številka stroja/vozila: YF1C3HFK15F02xxxx, Leto izdelave: 2005, Na zahtevo navedite referenčno številko: 24376 Splošno: Letnik: 2005 EU odobritev velja do: 31.10.2026 Znamka in model: Narko, podvozje za kontejnerje Število osi: 3 Informacije: Prikolica za kontejnerje Zračna zavora Velikost pnevmatik: 385/65R 22.5 Mere in teža: Dolžina: 1065 cm Lastna teža: 5090 kg Največja dovoljena nosilnost: 18910 kg Opombe/Znane napake: Prikazuje nekaj rje. Pred prodajo ne bo prešla pregleda za EU odobritev. Opis: Prodajamo prikolico Narko NCP z 3 osmi iz leta 2005. Pred prodajo prikolica ne bo prešla pregleda za EU odobritev. Lahko se pojavijo napake in pomanjkljivosti. Pripravljena za dostavo. Prevoženi kilometri: 1 Nljdpfxezzmywo Ab Djg Tehnični pregled: Da EU odobritev velja do: 31.10.2026 Lastna teža: 5090 Skupna teža: 24000 Nosilnost: 18910 Širina: 255 Dolžina: 1065 Model: NCP 3-osna prikolica za kontejnerje = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.640 kg, skupna masa: 40.000 kg, prva registracija: 02/2023, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R 19,5, barva: siv, Leto izdelave: 2023, 3-axle Mega Flatbed Semi-Trailer HeavyTrailer Gross weight: approx. 40,000 kg Fifth-wheel load: approx. 16,000 kg Axle load: approx. 24,000 kg Unladen weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Vehicle width: 2,540 mm Coupling height: approx. 980 mm / 1,100 mm Loading height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous cross members - Wide underrun neck approx. 700 mm - 6 pairs of lashing rings (2,000 kg lashing capacity), welded into outer frame - 6 pairs of stake pockets (80 x 50 mm) in outer frame - 6 pairs of stake pockets (80 x 50 mm) inside on the longitudinal beam - 2 pairs of ferry lashings, painted yellow - 6 pairs of lashing rings (5,000 kg lashing capacity), welded into outer frame - Front wall approx. 2,000 mm high, with sheet metal cladding, bolted design - Large, edged premium rear lamp panel - Rear underrun protection, welded version (rectangular tube) - Side underrun protection, both sides Support Legs - 24 t telescopic landing gear, single-sided operation, half-moon with base plate Axles/Suspension - 3 axles à 8 t (technically 9 t), disc brakes - Second ride height: Button for 2nd ride height at bracket for raising and lowering (+ approx. 120 mm) - Air suspension, total stroke approx. 300 mm - Lifting and lowering device with 1 rotary slide valve - Holder for lifting/lowering device, bolted version - 6 tyres 445/45 R 19.5 - Wheel mounting via center centering Brakes - Dual-circuit compressed air brake system according to EC Directive 71/320 - With double eyelet valve for brake and spring brake - Test nipple for brake cylinder pressure at front right brake cylinder - Each coupling button red and yellow - Lifting/lowering device mounted at rear left in direction of travel - 2 x approx. 80 l air tanks in steel, painted black (1x brake, 1x lifting/lowering) Lighting System - Lighting system 24 Volt with large multifunction lights - Side marker lights (LED) with reflector - Front position lights, lower, white, one each on left and right - 15-pin plug and socket at front - EBS socket - License plate lighting Floor - 28 mm hardwood floor with galvanized omega steel profiles - Hardwood floor screwed onto the cross members - Omega profiles bolted to head frame Painting - KTL with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau Nedpfxsv Darpe Ab Delg Accessories - Contour marking for flatbed vehicles - Front wall up to 2,000 mm high, with sheet metal cladding, plug-in type - Bracket for rotating beacon at rear - SmartBoard - ECE marking plate at rear - 4x warning signs, extendable - Access ladder rear right, foldable and extendable at rear - 2x wheel chocks with holder - 2 rubber bumpers at rear corners - Mud flaps at rear - Plastic fenders with anti-spray mud flaps - 4 pairs of container locks with retractable twistlocks, recessed into the floor, including additional cross members - Suitable for accommodating 1x40' and 2x20' containers - Open mesh box longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanized, bolted

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.100 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading platform length 8,100 mm, loading height (laden) approx. 900 mm, 20 lashing rings, each rated for 10 t, 14 stake pockets in the outer frame, loading ramps (approx. 3,000 x 750 mm), ramps laterally adjustable, spring assist for one-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or straps, contour markings as per regulations, spring-loaded parking brake, vehicle fully hot-dip galvanized, Surcharges available for: warning panels with lighting and beacon = Price: €800, platform widening to 3 m = Price: €1,100, hydraulic one-piece ramps = €500. Also available with 9 m loading platform length and platform widening in stock. Nledpfx Ajz A Ux Ujb Dog -- Subject to typing errors, mistakes, and changes. Sample images -- More data available at: !, More details: !

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: Nlodpfx Aotvfkfob Deg - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: rabljeno, prva registracija: 02/2008, Leto izdelave: 2008, Schmidt Hagen SP/42/E/13,5-21,5 ∗3-osni plato polpriklopnik∗Krmilne osi∗ALCOA∗ !!! zelo dobro stanje !!! ● ABS ● Zračno vzmetenje ● Dvižni/spustni sistem ● Višina tal: 1.420 mm ● Alcoa - Dura Bright platišča ● 3 x Mercedes osi z disk zavorami ● vse 3 osi so vodljive! ● Pneumatike: 385/55 R 22.5 ● Globina profila: 3/2 / 5/4 / 5/6 mm Nlsdeyutxzopfx Ab Dsg ● Skupna masa: 42.000 kg ● Lastna masa: 10.200 kg ● Nosilnost: 31.800 kg - nemški polpriklopnik - Tehnični pregled: na zahtevo in za doplačilo: NOVO! Napake in vmesna prodaja pridržane! = Dodatne informacije = Za več informacij se obrnite na Joannis Arpantzanis ali Kai Bühler.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014200, lastna masa: 6.700 kg, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis, semi-trailer, forwarding version Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly chamfered, new design with "Load-Lock profile" for securing strap hooks 24 t, 2-speed landing gear, single-sided operation, with straight base, without telescopic adjustment Free landing leg corner dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of and behind each axle Spray flaps in front of the 1st axle and behind each axle with anti-spray, according to EC 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm (lock not included) Axles + Suspension SAF drum brake axles "Axles/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by "3x braking" (start assist is active up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tyre damage Brake system 2-line compressed-air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle dynamic stability system Wheels and tyres 235/75 R17.5, brand according to manufacturer's choice Steel rims, factory silver Electrics 24 V, multi-chamber lamps, yellow LED side marker lamps 2 white marker lamps at the front 2 white/red lane marker lamps at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Floor Phenolic plywood approx. 30 mm thick, for high point load capacity, suitable for forklift axle load up to max. 5,600 kg Front wall / front corner posts 25 mm aluminium hollow section, 1,350 mm high, front corner posts in steel, volume design Country of registration / plates Nljdjza A Txepfx Ab Dsg Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminium

Stanje: rabljeno, največja dovoljena obremenitev: 18.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1993, • Višina nakladalne platforme: pribl. 880 mm • Hidravlične rampe • 40-mm vlečna kljuka • Opozorilna luč, ki se vrti Nodpjz A Nhwefx Ab Delg • Bobnasta zavora • Listnata vzmet • 1 x predal za orodje • Dvojna pnevmatika • Os SAF Vse navedene informacije so podane brez jamstva / pridržana pravica do predhodne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 17.640 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2015, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 8.355 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.600 mm, Leto izdelave: 2015, Oprema: ABS, Good condition Nedpfx Asy Dmuveb Dolg

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck Nodpfx Absrvw U Se Djlg • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon