Müller-Mitteltal T40 nakup rabljenega (983)

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Dcodpfjpk D I Aox Al Heg ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Swivel supports at rear chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) toolbox lid on bogie platform * LED tail lights * Removable rear amber beacon * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four side stake pockets each with integrated 2 t lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of bogie platform, 5 pairs of UVV-compliant swivel and lowerable lashing rings loadable in all directions and embedded in external frame – at corners up to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in rear tapered section) * Widening planks stored in center of loading area Dcodpfxol Tq Eue Al Hsg * Hydraulic single-section loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Digger arm rest above rear axle up to crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on side of digger arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, bogie, drawbar, folding wideners & loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. calendar week 32 / 2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders Djdel Th Adepfx Al Hocg * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable Dcjdpfxopk D Iio Al Hjg ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffer * Mechanical rear support legs ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * Suitable for roll-off container transport with container lengths from 5,500 to 7,000 mm * Pneumatic 4-point container clamp lock and mechanical plug-in end stops at the front of the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swinging end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 cloverleaf-style lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp run-up area * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible total weight technically possible: 27,000 kg * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 13.410 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 11 m³, Leto izdelave: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gears at the front * Folding galvanized steel underrun protection for paver loading * Closed plastic single mudguards Dcodexl Nkgopfx Al Heg * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grained steel * Steel three-way tipper body (side walls with MM profile - continuous without side posts - swinging with manual central locking and drop-down left side wall with board spring lifter) * Tarpaulin similar to RAL 7038 agate grey with side tension by ratchet straps and elastic cords at the front and rear * Front wall platform made of grating with step at drawbar and hand grip on the front wall * Rear wall – made of HBW 400 steel – swinging with automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * 4 x 3 t recessed and foldable lashing rings per side – integrated into steel floor * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * Side wall paintwork in your desired RAL color (no special or metallic paintwork) – changeable up to approx. 6 weeks before completion * Axles, air tanks, landing gears, flange towing eye painted in black tone * Chassis, underrun guard and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale reserved * Available from approx. week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (electronic braking system with RSS) * Emergency release for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: Dodpfxsx Ipbye Al Hocg * Tire pressure monitoring system with display possibility in the truck dashboard via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar eye / Drawbar: * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) ----General attachments: * Landing leg at the front * Foldable galvanized steel underrun guard for paver feeding * Enclosed single plastic mudguards * Front wall platform made of grating with step on drawbar and handholds on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Steel 3-way tipper body with continuous asymmetrical aluminum side walls – without center stanchion – pendulum-mounted with manual central locking, left side foldable with side board spring lifter * Tailgate – made from HBW 400 steel – pendulum-mounted with automatic 2-claw lock * 5 mm steel floor made from HBW 450 steel ----Load securing: * 4 x 3 t lashing rings per side – recessed and foldable – integrated into the steel floor ----Roll tarp: * Roll tarp – agate grey, similar to RAL 7038 * Tarpaulin tensioning using ratchet tensioners on the sides and tensioning rubber at the front and rear ----Painting: * Chassis, underrun guard, and drawbar hot-dip galvanized * Axles, air tanks, landing leg, and flange towing eye painted in a shade of black * Side wall painting according to RAL color of choice (excluding special or metallic paints); color can be changed up to approx. 6 weeks before completion ----Info: * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * New vehicle without first registration, with manufacturer’s warranty * Subject to errors and prior sale * Sample images (vehicle images may vary due to special equipment) ----Delivery time: * Vehicle available from week 42/2026

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring brake chambers * Drum brakes Dedpfx Aoq Euagsl Hjcg ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Towing Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical landing gear at front * Rear: 2 mechanical foldable supports * Plastic toolbox, right side * 2-step access step, front left (in direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking mounts, plus 2 on the front wall * Steel pallet, 3-way tipper body (continuous side walls - without central stanchions - foldable with side wall spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel plate floor * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * Plus 4 x 3 t recessed lashing points per side in the outer frame ----Ramps: * 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform, integrated in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, foldable supports, and rear stanchions hot dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side boards painted in RAL color of your choice (excluding special or metallic paint); color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. calendar week 28 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11.9 Masterline Dcjdpfsl Thw Iex Al Hsg ----Brakes: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin supplementary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic toolbox mounted on the right side * Two-step access ladder, front left in direction of travel * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 pieces at the front wall * Steel pallet—3-way tipper body (continuous side panels—no centre stanchions—fold-down with side panel spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Rear ramp mounting rail ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side in the outer frame ----Ramps: * 1 pair of aluminium ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment beneath the loading area integrated into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paint: * Chassis, drawbar, tipper body, front wall, folding supports, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Sideboard paintwork in preferred RAL colour shade (excluding special or metallic paints), changeable up to 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted * Sample images ----Delivery Time: * available from approx. week 28 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar, approx. 300 mm, with 40 mm flange towing ring * Jost mechanical support winch at the front * 2 mechanical folding supports at the rear Dedpfjx Hm Rcsx Al Hecg * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolt-on underrun guard * Plastic quarter mudguards * Net hooks located at the central locking bearing and 2 on the front wall * Chassis made of high-tensile steel * Steel three-way tipper body with reinforced "Strong" side walls (continuous upper side walls, reinforced with internal tube, no central stanchions, foldable with side wall spring lifter) * Bolt-on rear stanchions * Combination steel double-wing rear door, asymmetrical split, can swivel and be locked at 270°, not foldable, with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bolt lock at the rear and central locking. Deactivation function for automatic tailgate operation when reverse tipping with open door wing * 1 x 5 t lashing ring in each corner and 4 x 3 t lashing points recessed into the outer frame on each side * 4 mm high-tensile steel floor plate * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable rear storage compartment recessed below the loading area in the chassis for the ramps * Drawbar, underrun guard, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and support winch painted in a black finish * Tires: 358/55 R 19.5 * Side wall coating in a RAL color of your choice (no custom or metallic finishes). Color can be changed up to approx. 6 weeks before completion. * Subject to errors and prior sale. * Available immediately from week 29/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic leaf springs with tandem compensating aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front-right on chassis * 15-pin power connector Dcedpox Hm Riofx Al Hog * LED rear lights 12/24 V * Bolt-on side underrun protection * Plastic quarter mudguards * Tie-down hooks located at central locking mounts, plus 2 on the front wall * Chassis made of fine grain steel * Steel platform – 3-way tipper body with reinforced strong side walls (continuous upper side walls with internal tube reinforcement – without intermediate posts, side walls foldable with drop side spring assist) * Rear corner posts bolted * Combination steel wing-door rear wall – dual-wing asymmetrical, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping operation, locking via galvanised turning rod lock at the rear and central locking, deactivation function for automatic rear wall operation when tipping backwards with open door * Four 5 t lashing points in the corners, and four 3 t lashing rings recessed in the outer frame on each side * 4 mm steel floor made of fine grain steel * Mounting rail at rear for loading ramps * Reinforced body with cargo lashing certificate * 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred & tracked vehicles * Lockable storage compartment at rear under load area recessed in chassis for the ramps * Drawbar, underrun protection, rear corner posts, and rear foldable supports hot-dip galvanized * Axles, springs, air tank and landing gear painted in black * Tyres: 358/55 R 19.5 * Drop sides painted in desired RAL color (no special or metallic finishes) – can be changed up to approx. 6 weeks before completion * Subject to errors and prior sale * Available immediately from calendar week 29/2026 * Example images

Stanje: rabljeno, največja dovoljena obremenitev: 4.960 kg, skupna masa: 10.500 kg, prva registracija: 04/1993, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 6.260 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.430 mm, prostornina tovornega prostora: 37 m³, Oprema: ABS, dvižna zadnja plošča, 2-axle tandem refrigerated trailer, 7 m, with 1 ton tail lift. * THERMOKING LND-II MAX (diesel engine) and stand-by cooling, 380 V ELECTRIC * Vehicle number for customer inquiries: 4593 * Tail lift * Air suspension * EBS (Electronic Braking System) * Anti-lock braking system (ABS) No liability for printing or typographical errors. Sale exclusively to commercial customers. Dcedsykxflepfx Al Heg Subject to prior sale and errors. Changes, prior sale, and errors are expressly reserved. The description serves solely for the identification of the vehicle and does not constitute a warranty in the legal sense of the purchase contract. The purchase contract description is binding. * TOP SERVICE & QUALITY * We are happy to provide you with a leasing, financing, or hire-purchase offer Guarantee insurance available upon request from the insurer * TÜV inspection / UVV LBW (tail lift safety test) / tachograph inspection and OBU (On-board Unit) installation can be arranged by our local partners * Export license plates for 30 days available All export documents can be provided, but must be requested individually * Toll collection for Toll Collect can be arranged in-house * Free transfer from Stuttgart airport or Metzingen (Württ) railway station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 10/2013, skupna širina: 2.750 mm, Leto izdelave: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-Axle | Hydraulic Low-Loading Platform | 48 t Gross Vehicle Weight | 275 cm Wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for transporting machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy construction and reliability. Technical Specifications: Brand: Müller Mitteltal Model: ITS-VLL 30.0 Profi Chassis Number (VIN): WMM00000D0057250 Permissible Gross Weight: 48,000 kg Axle Configuration: 3 Axles Axle Loads: - Axle 1: 10,000 kg - Axle 2: 10,000 kg - Axle 3: 10,000 kg Permissible Rolling Load: 18,000 kg Loading Platform: Low-level loading (low loader design) Loading Ramps: Hydraulically operated Low-loading Platform: Height hydraulically adjustable (up/down) Tyres: Good condition Construction: All-steel chassis Maximum Speed: 80 km/h Features & Options: - Heavy-duty low loader design - Hydraulic height-adjustable low-loading platform - Hydraulic rear loading ramps - Wide (275 cm) and stable loading area - Suitable for excavators, rollers, cranes, etc. Robust construction, immediately ready for use Condition: The trailer is used but fully functional and shows age- and use-related wear. Technically, it is a robust and reliable equipment transporter. Ready for immediate operation – ideal for transport companies and construction firms. For further information or to arrange a viewing, please contact us. = Further Information = Axle Configuration Rear Axle 1: Twin tires; Max. axle load: 10,000 kg; Steerable Rear Axle 2: Twin tires; Max. axle load: 10,000 kg; Steerable Rear Axle 3: Twin tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 14,500 kg Dcsdpfxjy I Si Te Al Heg Payload: 33,500 kg gross vehicle weight (GVW): 48,000 kg Maintenance, History and Condition APK (Roadworthiness test): valid until 02/2027 Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information Please contact Klaas Gerrits or Henk Gerrits for further information.

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Storage compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, -- printing errors, mistakes and changes reserved, sample images --, For more data see: !, More details: ! Dedpfoyy Urnjx Al Hjcg

Stanje: rabljeno, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2020, naslednji pregled (TÜV): 11/2026, Oprema: ABS, Nemško vozilo iz prve roke brez nesreč Stranske stranice iz aluminija SAF osi Bobnaste zavore dobro vzdrževano stanje najem, nakup, najem z odkupom Dcedpfxoy Haz Ue Al Hsg polni servis najem od 590 EUR mesečno neto (cene najema so odvisne od trajanja pogodbe) vse informacije pod Primer najema z odkupom: 479 EUR mesečno neto pri trajanju 36 mesecev, posebna najemnina 5.000 EUR neto in končna rata 2.000 EUR neto. Vse cene so neto, brez DDV in pod pogojem pozitivne kreditne ocene.

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Dodpfx Aeyy I U Njl Hjcg

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Dcjdpfx Ajyy I U Ajl Heg

Stanje: rabljeno, lastna masa: 3.320 kg, največja dovoljena obremenitev: 10.180 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 12/2003, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 5.040 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19,5 148/145J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 285/70R19,5 148/145J, velikost zadnje pnevmatike: 285/70R19,5 148/145J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Sidrne ušesa, doplačilo za rampe: 800 €, -- Pridržujemo si pravico do tiskarskih napak, sprememb in drugih nepravilnosti, slike so simbolične --, Več podatkov na zahtevo!, Več podrobnosti: ! Dcjdpeyy I S Iefx Al Hjg

Stanje: rabljeno, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 10/2016, Oprema: ABS, Dobrodošli kod Johanning's Nutzfahrzeuge, vašeg specijaliste za mlada i ekskluzivna polovna vozila. ODMAH dostupno! Dostava moguća. Cena na upit! Finansiranje i lizing (rent-to-own) mogući na zahtev. Dodpjycpd Aefx Al Hecg Lokacija: 39606 Osterburg Marka: Mueller Mitteltal Tip: TA-2 / ETUE-TA-R 11,9 Godina proizvodnje: 2016 Radna težina: 3.250 kg TÜV: mart / 2026 SP: septembar 2026 Za dodatne slike ili video materijal slobodno nas kontaktirajte. Johanning's Nutzfahrzeuge, vaš partner za ekskluzivna i mlada polovna vozila. Naše usluge – Vaše prednosti: (nakon prodaje) - Mogućnost otkupa vašeg vozila (u bilo kom stanju) - Besplatna odjava vašeg vozila odmah - Usluga registracije za 150 € (uključujući takse i registarske tablice) - Privremena registracija - Pregled i test vožnja mogući uvek uz telefonski dogovor - Dostava na adresu prema dogovoru moguća Zadržavamo pravo na greške i prethodnu prodaju.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 11/2015, skupna dolžina: 14.000 mm, skupna širina: 2.550 mm, skupna višina: 4.050 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 17.5, medosna razdalja: 1.300 mm, Leto izdelave: 2015, Oprema: ABS, = Additional options and accessories = - EBS (Electronic Braking System) - Rear air suspension = Remarks = - Müller Mitteltal 3-axle low-loader - 3 × 10,000 kg axles - Fifth wheel load: 11,000 kg - Loading platform dimensions: Length 930 cm × Width 252 cm - Loading height: 98 cm - Dimensions of the covered neck: Length 500 cm × Width 264 cm - Neck loading height: 144 cm - Sliding curtain left and right - Dimensions of the hydraulic access ramp: - Section 1: 270 × 235 cm - Section 2: 180 × 235 cm - Lashing points - 2 storage boxes Well-maintained and robust low-loader, ideally suited for the transport of machines, forklifts, and work platforms, among others! = Further information = Axle configuration Tyre size: 235/75 17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 10,000 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Rear axle 2: Twin tyres; Max. axle load: 10,000 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Rear axle 3: Twin tyres; Max. axle load: 10,000 kg; Steering; Tyre tread left inner: 30%; Tyre tread left outer: 30%; Tyre tread right inner: 30%; Tyre tread right outer: 30% Weights Unladen weight: 10,700 kg Payload: 25,300 kg GVW: 36,000 kg Condition Technical condition: good Optical condition: good Dcsdpfoy I Axxjx Al Hsg Product safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-over Platform Trailer Ref. for enquiries: 11630 Vehicle available immediately from stock in Alsdorf New vehicle inc. COC * Gross weight: 21 t, Payload: 16.5 t, hot-dip galvanized chassis * Platform version with 400 mm high front wall, ramp securing via ramp holding rods and diagonal bracing * Version with gross weight 21 t, reinforced frame and axles, axle spacing 1,810 mm * Floor height approx. 910 mm loaded / approx. 940 mm unloaded * 7 m loading area with 400 mm high front wall * Extended ramps: 3 m one-piece hot-dip galvanized ramps with galvanized grating * Ramp lift with vertically standing, adjustable springs for easy single-person operation * Load securing package: * 4 UVV folding lashing brackets (LC 8,000 daN) mounted in the existing hole pattern in the 45° outer frame, positioned approx. 1 m from front/rear crossmember * 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole pattern in the outer frame * 2 UVV lashing rings each at front and rear, recessed in crossmember, LC 10,000 daN * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and end crossmember * Preparation for retrofitting container locks (container locks available at extra cost) * Softwood floor, 50 mm thick * Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering * 235/75R 17.5 (twin tyres, 8x) with tyre pressure monitoring sensor * Plastic toolbox in front of the front wall, right-hand side in direction of travel * LED lighting system * 7-pin socket at rear, prepared for overlength lighting with tail light (58 R) and ground * 2 LED reversing lights at rear * Flashing side marker lights * Oversize warning panel Dodpfx Aeyvxg Uel Hocg * 1 removable all-round LED beacon incl. bracket and installation * Folding supports at rear, front support leg with geared winding mechanism ---- Lease purchase example from our partner MMV Leasing: €665/month net for 60 months term with no down payment and €0 final instalment Other terms with/without down payment/final value possible! We are Müller-Mitteltal authorised dealer ----* Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside business hours available by appointment * We speak German, English, Russian, Polish, French * WhatsApp

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead Dodpfx Alsxglibj Hecg * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: Dsdpfoxglh Rox Al Hjcg * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: rabljeno, lastna masa: 3.110 kg, največja dovoljena obremenitev: 9.490 kg, skupna masa: 12.600 kg, konfiguracija osi: 2 osi, prva registracija: 05/2016, naslednji pregled (TÜV): 02/2025, dolžina tovornega prostora: 4.550 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 600 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, turntable trailer, leaf suspension, ABS (anti-lock braking system), lashing eyes, storage box, pendulum flaps. Body: 2-axle 3-way tipper trailer, Gigant axles, drum brakes, hot-dip galvanized frame! Djdjwth Iijpfx Al Hecg Loading height approx. 1290 mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors excepted!

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronski sistem kočenja) * RDÜ (nadzor pritiska u gumama) * Bubanj kočnice, 2 x 5,5 t Gigant osovine * Parabolične opruge sa izjednačivačem opterećenja * Vučno vratilo podesivo po visini oko 300 mm * BPW podupirač * Mehaničke zadnje noge za podršku * Plastična kutija za alat napred desno na čeonoj stranici * Bočna zaštita od podletanja * LED rasveta Dcjdpfxswyhzpe Al Hog * Pod od 50 mm mekog, četinjastog drveta * U uglovima ispred čeone stranice i završnog nosača po 1 x 6,3 t hvatište za vezivanje, kao i po 2 UVV prstena za vezivanje po 6,3 t ugrađena sa strane u spoljašnji ram * Jednodelne mehaničke rampe od rešetki sa oprugom za rad jednom osobom, dimenzije oko 2.350 x 870 mm (unutrašnje rastojanje 20 mm, rampe nisu pomične) * Čeona stranica, bočne stranice, blatobrani i vučno vratilo toplo pocinkovani * Osovine, opruge, vazdušni rezervoar, prednji podupirač obojeni u crno * Novo vozilo sa punom garancijom proizvođača * Greške i međuprodaja zadržani * Dostupno od oko 35. nedelje 2026.

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors Dcsdpfevin T Sox Al Hjg * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026