Müller-Mitteltal Muller-Mitteltal Etue-Ta-R 18.0 Przyczepa Tande... nakup rabljenega (57.529)

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izpust zraka iz zračnih posod v primeru izredne zavore ----Osi: * 2 x 7 ton Gigant osi ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Vlečna priprava / priključna priprava: * vlečna priprava, višina nastavljiva za 300 mm * podaljšek vlečne priprave za 250 mm (na 2.250 mm) * 40-milimetrska priključna priprava ----Osvetlitev / električni sistem: * sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED osvetlitev ----Splošni dodatni deli: * Jost podpirala spredaj * zunanja, pocinkana, zložljiva podpirala zadaj * plastična orodjarna škatla spredaj na desni strani, na čelni steni * stranski zaščitni odbijač * plastični blatniki ----Platforma za težke tovore: * 50 mm debela deska iz iglavcev * pred čelno steno je naprava za kasnejšo montažo zaklepnih mehanizmov za kontejnerje * vijakoma pritrjena čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine – trapezno profilirane – z možnostjo odpiranja in pomočjo vzmetne naprave za dvižne stene * jeklena zadnja stena, ki jo je mogoče vstaviti med rampe – nosilec za uporabo, ko se ne uporablja, je nameščen na notranji strani čelne stene * zadnje vzdolžne nosilce je mogoče vijačiti ----Pripravki za pritrditev tovora: * perforiran zunanji okvir, približno 45 stopinj nagneten, z nosilnostjo 2 toni na vsakih 480 mm * možna vgradnja 3-tonske pritrdilne palice na vsakih 600 mm * v kotih spredaj in zadaj je nameščena 1 x 6,3 tonska pritrdilna palica * v čelni in zadnji prečki so različne luknje za pritrditev tovora (nosilnost 1,2 tone) ----Rampe: * enodelne mehanske rešetaste rampe z vzmetjo za eno osebo, približno 2.750 x 600 mm (lahko se združijo do 20 mm) * naklon spredaj zadaj približno 860 mm ----Barvanje: * pocinkano podvozje, vlečna priprava, čelna stena, rampe in zadnja stena * barva dvižne stene v RAL 9010, čista bela * barvanje stranskih sten v barvnem odtenku RAL je na voljo po dogovoru ----Informacije: * --Ojačana in certificirana nadgradnja po standardu EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * Novo vozilo z garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak * Dostava: * dostavljivo od približno 41. tedna 2026 Fpsdpfxjxglibj Adxsk

Stanje: novo, največja dovoljena obremenitev: 8.670 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11,9 Masterline: ----Zavore: * Wabco EBS * Sistem za sprostitev v sili za vzmetni cilindri * Bobnaste zavore ----Os: * 2 x 5,5 tone, osi BPW ----Vzmetenje: * Parabolne vzmeti s tandem sistemom za izravnavo ----Vlečna prikolica / prirobnična vlečna prikolica: * Višinsko nastavljiva vlečna prikolica, vroče pocinkana, za 300 mm, s 40 mm prirobnično vlečno prikolico ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah RDÜ * LED razsvetljava * 15-polni vtič ----Splošni dodatni deli: * Orodjarna omara iz pocinkanega jekla, desna stran * Vijična zaščita proti podvozju * Plastični blatniki * Jost mehanska opora spredaj * 2 mehanski, vroče pocinkani oporni nogi zadaj ----Nakladalna prikolica: Fpjdpfx Adoq Hg Dxoxsk * Mrežaste kljuke na straneh in zadaj, v ležajih osrednjega zaklepanja, ter 3 kose na zunanji strani čelne stene * Vroče pocinkano podvozje * Jeklena paleta, 3-stranski nakladalni nadgrad * Neprekinjene stranske stene, brez srednjega nosilca, z možnostjo odklopitve z vzmetjo za dviž * Zadnja vrata z možnostjo odklopitve in nihanja preko ročnega osrednjega zaklepanja * Vroče pocinkana vijična zadnja stena * 4 mm jeklena pločevina za dno * Nosilna tirnica zadaj za nakladalne rampe ----Pritrditev tovora: * Na vsakem vogalu 1 x 5 ton, vgrajene in zložljive zatezne vrvice * Na vsaki strani 4 x 3 tone, vgrajene in zložljive zatezne vrvice v zunanjem okvirju ----Rampe: * 1 par aluminijastih nakladalnih ramp, približno 3.310 x 400 mm (nosilnost 8 ton / par), primerne za vozila z gumijastimi in goseničnimi pogoni * Zaklenljiv prostor za shranjevanje zadaj, pod nakladalno površino, vgrajen v podvozje ----Pnevmatike: * Pnevmatike 235/75 R 17,5 ----Barvanje: * Osi, vzmeti, rezervoar za zrak, vlečna prikolica in oporne noge, pobarvane v črni barvi * Barvanje bočnih stranic v RAL 9010, čisto bela * Barvanje stranskih sten v barvnem odtenku RAL, na voljo po dogovoru * Dno in čelna stena vroče pocinkane ----Informacije: * Nadgradba je ojačana s certifikatom za pritrditev tovora v skladu s standardom EN 12642 XL * Novo vozilo z garancijo proizvajalca * Pridržujemo si pravico do sprememb in prodaje * Dobavljivo od približno 45. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 8.600 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11,9 Masterline: ----Zavore: * Wabco EBS * Sistem za sprostitev v sili za vzmetni akumulatorski cilinder * Bobnaste zavore ----Osi: * 2 x 5,5 t BPW osi Fpedpfxsv Dz N Aj Adxok ----Vzmetenje: * Parabolična vzmet s tandem sistemom za izravnavo ----Vlečna prikolica / prikolica s prirobničnim nosilcem: * Vlečna prikolica z možnostjo nastavitve višine za 300 mm, pocinkana, s prirobničnim nosilcem 40 mm ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah RDÜ * LED osvetlitev * 15-polni električni vtič ----Splošni dodatni deli: * Orodjarna iz pocinkane jeklene pločevine na desni strani * Vijakarno pritrjena zaščita pred trkom * Plastični blatnik * Jost mehanska podpora spredaj * 2 mehanski pocinkani zložljivi podstojka zadaj ----Nakladalna prikolica: * Očesne kljuke na straneh in zadaj v nosilcih osrednje ključavnice ter 3 na zunanji strani čelne stene * Pocinkano podvozje * Jeklena paleta, 3-stranska nakladalna prikolica * Neprekinjene stranske stene brez osrednje podpore, z možnostjo zlaganja s pomočjo vzmetne podpore za stransko ograjo * Zložljiva zadnja vrata in nihajna vrata s pomočjo ročne osrednje ključavnice * Vijakarno pritrjena pocinkana zadnja podpora * 4 mm jeklena pločevina na dnu * Nosilna tirnica zadaj za nakladalne rampe ----Varovanje tovorja: * Na vsakem vogalu 1 x 5 t, vgrajena in zložljiva privezna točka * Na vsaki strani 4 x 3 t, vgrajene in zložljive privezne točke v zunanjem okvirju ----Rampe: * 1 par aluminijastih nakladalnih ramp, približno 3.310 x 400 mm (nosilnost 8 t / par), primerne za vozila z gumijastimi in verižnimi gosenicami * Zaklenljiv prostor za shranjevanje zadaj pod nakladalno površino, vgrajen v podvozje ----Pnevmatike: * Pnevmatike 235/75 R 17,5 ----Barvanje: * Osi, vzmeti, zračni rezervoar, vlečna prikolica in podpore pobarvane v črni barvi * Stranska ograja pobarvana v RAL 9010, čisto bela * Barvanje stranskih sten v poljubni barvi RAL je mogoče proti doplačilu * Dno in čelna stena pocinkana ----Informacije: * Nadgradnja ojačana s certifikatom za varovanje tovorja v skladu z EN 12642 XL * Novo vozilo z garancijo proizvajalca * Pridržane spremembe in napake * Prodaja je rezervirana ----Dobavni rok: * Na voljo približno v 45. tednu 2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izpust zraka v primeru izredne zavore za vzmetne akumulatorje ----Osi: * 2 x 7 ton, osi Gigant ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Vlečna palica / prirobnična vlečna palica: * vlečna palica, višina nastavljiva za 300 mm * podaljšek vlečne palice za 250 mm (na 2.250 mm) * 40-milimetrska prirobnična vlečna palica ----Osvetlitev / električna napeljava: * RDÜ (nadzor tlaka v pnevmatikah) * LED-osvetlitev ----Splošni dodatni deli: * sprednji opornik Jost * zunanji, vročepocinkani zložljivi oporniki zadaj * plastična orodjarna škatla spredaj na desni strani na čelni steni * stranski zaščitni element * plastični zaščitni element za četrt kolesa ----Nosilna površina: * 50 mm debela deska iz iglavca * pred čelno steno naprava za naknadno namestitev zaklepnih mehanizmov za kontejnerje * vijična čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s pomočjo vzmetnega dvigala za stransko steno * zadnja jeklena stena, ki se lahko vrine med rampe - pritrdilni element, ki se uporablja, ko se ne uporablja, notri pred čelno steno * zadnji nosilci, vijični ----Pripomočki za pritrditev tovora: * perforiran zunanji okvir, nagnjen pod kotom približno 45 stopinj, z nosilnostjo 2 toni na vsakih 480 mm * možna je vgradnja 3-tonske pritrdilne zanke na vsakih 600 mm * v kotih spredaj in zadaj po 1 pritrdilna točka z nosilnostjo 6,3 tone * na čelni in zaključni palici različne vrtine za možnost pritrditve z 1,2 tone Fsdpfxexglh Rs Adxspk ----Rampe: * enodelne mehanske rešetaste rampe z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (možnost zlaganja do 20 mm) * naklon na zadnji strani približno 860 mm ----Barvanje: * vročepocinkano podvozje, vlečna palica, čelna stena, rampe in zadnja stena * barva stranske stene RAL 9010, čista bela * barvanje stranskih sten v barvnem odtenku RAL je možno za doplačilo ----Informacije: * --ojačana in certificirana nadstavba v skladu s standardom EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * novo vozilo z garancijo proizvajalca * napake in medvmesna prodaja pod pridržkom ----Dobavni rok: * na voljo približno od 41. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 15.970 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21,0: ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Sistem za izpust zavor v sili za cilindrične zavorne čeljusti * Bobnaste zavore ----Os: * 2 x 11 ton Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvižnim in spuščanjem ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica s 50 mm prirobnično vlečno palico in nastavljiva vlečna palica po višini ----Osvetlitev / električna napeljava: * 15-polni električni vtič * LED luči 12/24 V * Sistem za nadzor tlaka v pnevmatikah (TPMS) ----Splošni dodatni deli: * Sprednja opora Jost * Zunanje zložljive opore zadaj * Plastična orodjarna škatla, približno 750 x 350 x 300 mm, nameščena na desni strani * Stranska zaščita * Plastični stranski blatniki ----Površina za tovor: * Pred sprednjo steno in zadnjim naklonom, priprava za naknadno namestitev zaklepov za pritrditev 20-palčnih kontejnerjev * Izvedba 21 ton celotne mase z ojačanim okvirjem in ojačanimi osmi * Paket za ojačitev za prevoz vrtalne naprave na šasiji * 50 mm iglasto-lesena talna obloga v vkleščeni izvedbi * Pred sprednjo steno priprava za naknadno namestitev zaklepov za pritrditev * Vijična sprednja stena iz gladke pločevine * Razdeljene stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s sredinskim zložljivim mehanizmom * Jeklena zadnja stena, ki se lahko potisne med rampami - držalo, ko ni v uporabi, na notranji strani pred sprednjo steno * Vijične zadnje stranske letve ----Pritrditev tovora: * Odprt zunanji okvir, približno 45 stopinj upognjen, z 2 tonami vlečne sile na vsakih 480 mm * Možnost vgradnje 3 ton varnostnih zank na vsakih 600 mm * Profifix pritrdilna letva na vzdolžni osi, na sredini, za možnost pritrditve do LC 3000 daN * Na vogalih, spredaj in zadaj, po 1 x 10 ton pritrdilne točke * Paket Lasi z 2 x 8 ton pritrdilnih točk na vsaki strani, potopljenih v zunanji okvir, v sprednji in zadnji nosilec različne vrtine za možnost pritrditve 1,2 tone ----Rampe: * Enodelna mehanična rešetasta ramapa z vzmetnim mehanizmom za delovanje z eno osebo, približno 3.000 x 620 mm (možnost potiskanja skupaj do 20 mm) * Naklon spredaj, približno 860 mm, šasija ----Višina nakladanja: * prazna približno 940 mm Fedpfx Adsq Dyu Uoxepk * natovorjena približno 910 mm ----Medosje / pnevmatike: * 1.810 mm * Pnevmatike: 235/75R17.5 ----Barvanje: * Barvanje stranskih sten v RAL 9010, čista bela barva * Vlečna palica, sprednja stena, zadnja vrata, zložljive opore in rampe pocinkane * Os, vzmeti, zračni rezervoar in opora pobarvane v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja rezervirani ----Dobavni rok: * Na voljo takoj, Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izredno sprostitev zavor za cilindrične zavorne akumulatorje ----Osi: * 2 x 7 t Gigant osi ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Potezna prikolica / prikolica s prikolico: * višina potezne prikolice nastavljiva za 300 mm * podaljšek potezne prikolice za 250 mm na 2.250 mm * 40 mm prikolica s prikolico ----Osvetlitev / Elektrika: * sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED osvetlitev ----Splošni dodatni deli: * sprednji podpiralni mehanizem Jost * zunanji pocinkani, zložljivi podpiralni nogari na zadnji strani * plastična orodjarna škatla na sprednji desni strani na čelni steni * stranski zaščitni element * plastični stranski odbijač ----Ploščad prikolice: * 50 mm deska iz iglastih vrst lesa * pred čelno steno naprava za naknadno montažo zaklepnih mehanizmov za kontejnerje * čelna stena, privita iz gladke pločevine * stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s pomočjo vzmetnih dvigal za stransko steno * jeklena zadnja stena, ki se lahko potisne med rampe - nosilec, ko se ne uporablja, na notranji strani pred čelno steno * zadnji okvir, privit ----Varovanje tovora: * luknjan zunanji okvir, nagnjen za približno 45 stopinj, z 2 t vlečne sile na vsakih 480 mm * možna vgradnja 3 t pritrdilnih točk na vsakih 600 mm * na vogalih spredaj in zadaj po 1 x 6,3 t pritrdilna točka * v čelni in končni nosilni konstrukciji različne luknje za 1,2 t možnost pritrditve * pritrdilna letva Profifix na vzdolžni osi, na sredini, za možnost pritrditve do LC 3000 daN ----Rampe: * enodelne mehanične rešetaste rampe z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se potisnejo skupaj do 20 mm) * sprednji naklon na zadnji strani, približno 860 mm Fjdpfoq Dyvvsx Adxspk ----Barvanje: * pocinkana šasija, potezna prikolica, čelna stena, rampe in zadnja stena * barva stranske stene v RAL 9010, čisto bela * barvanje stranskih sten v RAL barvnem odtenku je možno proti doplačilu ----Informacije: * --Okrepljena in certificirana konstrukcija po EN 12642 XL, vključno s certifikatom za varovanje tovora-- * novo vozilo s proizvajalčevo garancijo * napake in vmesna prodaja pridržane ----Dobavni rok: * takojšen dobavni rok iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izredno sprostitev zavor za vzmetne akumulatorje ----Osi: * 2 x 7 ton, osi Gigant Fpedpfx Aorvvfljdxok ----Vzmetenje: * parabolično vzmetenje z izravnalnim agregatom ----Potezna priprava / priključna priprava: * potezna priprava, nastavljiva po višini za 300 mm * podaljšek potezne priprave za 250 mm (na 2.250 mm) * 40 mm priključna priprava ----Osvetlitev / električna napeljava: * RDÜ (nadzor tlaka v pnevmatikah) * LED osvetlitev ----Splošni dodatni deli: * sprednji podpiralni stojalo Jost * zunanja, vroče pocinkana, zložljiva podpiralna stojala na zadnji strani * plastična orodjarna škatla na sprednji desni strani, na čelni steni * stranska zaščita * plastični četrtni blatoohranilnik ----Ploščad nizkopodsestnega priklopnika: * 50 mm iglasta lesena plošča * pred čelno steno naprava za naknadno namestitev kontainerjev * vijolična čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine – trapezno profilirane – zložljive s pomočjo vzmetnih dvigal * jeklena zadnja stena, ki jo je mogoče vrinati med rampe – držalo pri neuporabi znotraj, pred čelno steno * zadnja ograja, vijolična ----Varovanje tovor: * luknjast zunanji okvir, upognjen pod kotom približno 45 stopinj, z 2 t vlečne sile na vsakih 480 mm * možna je vgradnja 3 t pritrdilnih elementov za pritrditev tovora na vsakih 600 mm * v vogalih na sprednji in zadnji strani po 1 pritrdilni element s 6,3 t vlečne sile * v čelni in zaključni prečki različne luknje za pritrditev tovora z 1,2 t vlečne sile * Profifix pritrdilna letva v vzdolžni osi, na sredini, za pritrditev tovora do LC 3000 daN ----Rampe: * enodelne mehanične rešetaste rampe z vzmetnim mehanizmom za delovanje z eno osebo, približno 2.750 x 600 mm (mogoče jih je pomikati skupaj na 20 mm) * nagib za vožnjo na zadnji strani, približno 860 mm ----Barvanje: * vroče pocinkano podvozje, potezna priprava, čelna stena, rampe in zadnja stena * barva stranic v RAL 9010, čista bela * barvanje stranskih sten v enem RAL odtenku je možno po dogovoru ----Informacije: * --ojačan in certificiran nadgradnji po EN 12642 XL, vključno s certifikatom za varovanje tovor-- * novo vozilo z garancijo proizvajalca * napake in vmesna prodaja pridržane ----Dobavni rok: * takoj na voljo iz Egestorfa

Stanje: rabljeno, največja dovoljena obremenitev: 4.500 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, skupna širina: 2.500 mm, skupna višina: 3.000 mm, Leto izdelave: 1979,

Stanje: rabljeno, največja dovoljena obremenitev: 4.960 kg, skupna masa: 10.500 kg, prva registracija: 04/1993, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 6.260 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.430 mm, prostornina tovornega prostora: 37 m³, Oprema: ABS, dvižna zadnja plošča, 2-axle tandem refrigerated trailer, 7 m, with 1 ton tail lift. * THERMOKING LND-II MAX (diesel engine) and stand-by cooling, 380 V ELECTRIC * Vehicle number for customer inquiries: 4593 * Tail lift * Air suspension * EBS (Electronic Braking System) * Anti-lock braking system (ABS) No liability for printing or typographical errors. Sale exclusively to commercial customers. Subject to prior sale and errors. Changes, prior sale, and errors are expressly reserved. The description serves solely for the identification of the vehicle and does not constitute a warranty in the legal sense of the purchase contract. The purchase contract description is binding. * TOP SERVICE & QUALITY * We are happy to provide you with a leasing, financing, or hire-purchase offer Guarantee insurance available upon request from the insurer * TÜV inspection / UVV LBW (tail lift safety test) / tachograph inspection and OBU (On-board Unit) installation can be arranged by our local partners * Export license plates for 30 days available All export documents can be provided, but must be requested individually Fpodoykxflopfx Adxjk * Toll collection for Toll Collect can be arranged in-house * Free transfer from Stuttgart airport or Metzingen (Württ) railway station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int.-št.: ZANDT Zelo dobro vzdrževana tandem šasija s kesonom ZANDT Cargo * TAT B 110 * Keson * Ojačano leseno dno * Težko nosilne pritrdilne tirnice * Dvoosna tandem os * Široke pnevmatike * Nastavljiva vlečna kljuka * Največja dovoljena masa 11.900 kg * Zelo dobro stanje Možna je menjava staro za novo Financiranje od 3,99% Pridržujemo si pravico do napak in vmesne prodaje! Podatki v tem oglasu so neobvezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema nobene odgovornosti za tipkarske ali prenosne napake. Oprema iz oglasa se preveri posebej. Vsi podatki v oglasih so neobvezujoči! Fpsdpfjymuz Ujx Adxjk Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00-17:00, petek od 9:00-14:00 ali po dogovoru!

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int. št.: ZANDT zelo dobro vzdrževana tandem ploščadna prikolica ZANDT Cargo * TAT B 110 * ploščad * ojačan lesen pod * pritrdilne tirnice za težke tovore * tandem z dvema osema * široke pnevmatike * nastavljivo vlečno oje * dovoljena skupna masa 11.900 kg * zelo dobro stanje Fpsdpfx Asymuz Ijdxsk Možnost menjave starega za novo Financiranje od 3,99 % Napake in vmesna prodaja pridržane! Podatki v tem oglasu so nezavezujoči opisi in ne veljajo kot zagotovljene lastnosti. Prodajalec ne prevzema odgovornosti za tipkarske napake ali napake pri prenosu podatkov. Oprema, navedena v oglasu, je treba posebej preveriti. Vsi podatki v oglasih so nezavezujoči! Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 petek od 9:00 do 14:00 in po dogovoru!!!

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: Fodpfx Adopk D D Hoxjpk * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Zavore: * Zavorna sistema EBS * Naprava za izpust zavor v primeru izrednih razmer za cilindr z vzmetjo * Bobnaste zavore ----Osi: * 2 x 5,5 t BPW osi ----Vzmetenje: * Parabolične vzmeti z izravnalnim mehanizmom ----Vlečna priprava / priključna plošča: * Vlečna priprava, nastavljiva po višini za 300 mm * 40-milimetrska priključna plošča ----Splošni dodatni deli: * Sprednja opora Jost * Zunanje, vroče pocinkane, zložljive opore zadaj * Plastični blatniki * Plastična orodjarna škatla spredaj desno na čelni steni ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED-osvetlitev ----Nosilna površina: * Nosilna površina 6,27 m * Primerna za transport kontejnerjev * 50-milimetrski pod iz iglastih plošč * Pred čelno steno je nameščen priključek za poznejšo montažo zaklepov za kontejnerje * Vijolična čelna stena iz gladkih pločevin * Stranske stene iz jeklenih pločevin, trapezno profilirane, z možnostjo zlaganja z vzmetmi za podpiranje * Jeklena zadnja stena, ki se lahko potisne med držala za nakladalno ploščad, ko ni v uporabi, je nameščena notri pred čelno steno * Zadnji nosilci, vijeni ----Pripomočki za pritrditev tovora: * Zunanji okvir z luknjami, oblikovan pod kotom približno 45 stopinj, s silo vlečenja 2 t na vsakih 480 mm * Možna je vgradnja 3-tonskih kljuke za pritrditev tovora na vsakih 600 mm * V kotih spredaj in zadaj po 1 x 6,3-tonska kljuka za pritrditev tovora Fpjdpjq Ra D Eofx Adxsk * Na čelni in končni nosilni nosilci različne luknje za pritrditev tovora s silo 1,2 t ----Nakladalne rampe: * Enodelne, mehanične nakladalne rampe z vzmetmi za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se združijo do 20 mm) * Nakladalni nagib zadaj približno 860 mm ----Pnevmatike: * Pnevmatike: 235/75R17.5 ----Medosna razdalja: * Medosna razdalja: 990 mm ----Barvanje: * Vroče pocinkano podvozje, vlečna priprava, čelna stena, zadnja stena, zadnji nosilci in nakladalne rampe * Barvanje stranskih sten v barvi RAL 9010, čista bela * Barvanje stranskih sten v drugi barvi RAL je mogoče, vendar za doplačilo ----Informacije: * Pridržujemo si pravico do sprememb in napak * Novo vozilo z garancijo proizvajalca ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: ----Braking system: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem compensation unit ----Drawbar / Flange drawbar eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre pressure monitoring system ----General fittings: * Jost landing gear at the front * Outboard folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Drop sides made of trapezoidal profile steel sheeting, foldable with tailboard spring assist Fedpfx Adel Th Hwsxspk * Steel rear wall insertable between ramps - holder for storage when not in use in front of headboard * Bolted rear stakes ----Load securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * One 10 t lashing ring in each front and rear corner, various drill holes in the front and rear cross-members for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis centre for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, headboard, rear wall, loading ramps, and folding supports hot-dip galvanized * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL colour available at extra cost * Axles, springs, air tanks, flange drawbar eyes and landing gear painted in a shade of black ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: Fpodpfxsmi Tmae Adxok * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports Fpjdpfx Aepk D D Uedxsk * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: Fedpfx Aopk D Dmsdxopk * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor Fedpfx Adel Tilxsxepk * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release system for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via positioning cylinder Fodpfx Ajx Dp Atodxopk * Starting aid for shunting and mandatory lowering on the first axle – controlled via speed-dependent EBS electronics (no installation required on the truck; also with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flange-mounted drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connecting cables for agricultural and forestry vehicles * Power supply for radio remote: 12+24 V via taillight ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium wheels * Split-pin towing coupling (use only with retracted underrun protection) * Enclosed plastic half-shell single mudguards * Two-step access before the front bulkhead on the left side * Shovel and broom holders in front of the front bulkhead * 2 matte stainless steel toolboxes, approx. 650 x 350 x 320 mm, mounted right side * Enclosed side protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine end from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hook system (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of hooklift via radio remote control * Remote control with rapid function when lowering, not when raising * Emergency stop switches left and right sides * Container supports with 4 lateral supports per side and one roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 x mechanical fall supports at the rear * Approval for 20 t gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the radio remote is outside the charging cradle, the service brake must be applied for radio release. Brake connections must remain connected at all times so the hydraulically/pneumatically operated valves can be opened. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and fall supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / as-new condition ----Delivery time: * Vehicle is immediately available

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Lateral underrun protection * Foldable A-frame shield at the rear ----Electrics / Lighting: * 15-pin power socket * Multi-chamber taillights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each * Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unloaded loading height approx. 710 mm ----Load Securing: * 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips * Each side with 1 x (13.5 t) UVV tie-down point for securing lashings * 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 Fedpfsl Th Dmox Adxopk ----Wheelbase: * Wheelbase: 1,140 mm ----Paint / Finish: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with driving height +30 mm via positioning cylinder * Traction aid for shunting purposes and forced lowering onto the first axle – controlled via speed-dependent EBS electronics (no installation required on truck side, additionally supplied with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Eye: * 50 mm flange screw drawbar eye – height adjustable by +77 mm and -33 mm – for 2 ton support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lamps activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Power supply for radio control 12+24V via tail light ----General Attachments: * BPW landing gear at the front * Mechanical, extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Closed plastic half-shell individual mudguards * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 matt stainless steel toolboxes, approx. 650 x 350 x 320 mm, right side mounted * Closed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tractive force * Hook height 1,570 mm * Hooklift operated via radio remote control * Radio remote control with fast function during tipping, but not during winching * Emergency stop switches on both left and right sides * Container bed with 4 side supports each and one roll at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with raising the main arm * 2 x mechanical folding rear supports Fpsdpfx Aex Dp Agjdxok * Approval for 20 ton gross weight (2 x 9 ton axles) and 2 ton support load * Note: If the radio control is outside the charging cradle, the service brake must be engaged to enable remote operation. Brake connections must remain connected at all times to operate the hydraulic/pneumatic control valves. * Monitoring system for underrun protection to ensure it is retracted while tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, access steps, underrun guard, and folding supports hot-dip galvanized * Axles, air tanks, and front landing gear painted in black * Palfinger hooklift painted in black/yellow ----Information: * Subject to errors and prior sale * Vehicle in very good / like-new condition ----Delivery Time: * Vehicle immediately available

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on towing eye ----General attachments: * Jost landing gear at the front * Side underrun protection * Foldable A-panel at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions * Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear ----Loading edge: * Unloaded loading edge approx. 710 mm ----Load securing: Fsdpol Th Eyefx Adxjpk * 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * The axles, springs, landing gear, and air tank painted in a black tone ----General information: * Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 13.410 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 11 m³, Leto izdelave: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gears at the front * Folding galvanized steel underrun protection for paver loading * Closed plastic single mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grained steel * Steel three-way tipper body (side walls with MM profile - continuous without side posts - swinging with manual central locking and drop-down left side wall with board spring lifter) * Tarpaulin similar to RAL 7038 agate grey with side tension by ratchet straps and elastic cords at the front and rear * Front wall platform made of grating with step at drawbar and hand grip on the front wall * Rear wall – made of HBW 400 steel – swinging with automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * 4 x 3 t recessed and foldable lashing rings per side – integrated into steel floor Fpedpfxsxl Nkgj Adxok * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * Side wall paintwork in your desired RAL color (no special or metallic paintwork) – changeable up to approx. 6 weeks before completion * Axles, air tanks, landing gears, flange towing eye painted in black tone * Chassis, underrun guard and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale reserved * Available from approx. week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs – 110 mm wide – with tandem equalisation unit ----Drawbar / Drawbar Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre monitoring system ----General Attachments: * Jost landing leg at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel, foldable with drop side spring lifters * Steel rear wall can be slid in between the ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted Fsdpfx Asl Th Hljdxspk ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In front and rear corners, each 1 x 10 t lashing ring; various holes in front wall and rear crossmember for 1.2 t lashing option * Profifix lashing rail centrally positioned along the longitudinal axis, with lashing capacity up to LC 3000 daN ----Ramps: * One-piece mech. grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compacted to 20 mm) * Rear approach slope approx. 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanised * Sideboard painted in RAL 9010 pure white * Painting of the side panels in any RAL colour available at extra cost * Axles, springs, air tank, flange eye and landing leg painted in black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale subject to change ----Delivery Time: * Available immediately ex-works at Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ---- Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with manual lowering at the rear ---- Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ---- Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights ---- General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm, fitted on the right side (black powder-coated) * Side underride protection * Plastic quarter mudguards Fedpfx Aspk D Ncsdxjpk ---- Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis – loading height +20 mm * 50 mm softwood floor in clamped design * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with board wall spring-assisted lifter * Steel rear wall, can be inserted between the ramps – storage bracket in front of the bulkhead when not in use * Rear stakes bolted ---- Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * Each front and rear corner with 1 x 10 t lashing ring; various holes in the headboard and end cross member for 1.2 t lashing options ---- Ramps: * One-piece mechanical steel grating ramps with spring assistance for one-man operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear access slope approx. 860 mm ---- Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ---- Painting: * Chassis, drawbar, headboard, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing leg painted in black * Side boards painted in RAL 9010 pure white * Side walls can be painted in any RAL color for a surcharge ---- Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ---- Delivery time: * Immediately available from Egestorf