Müller Mitteltal Ta-2 14,4 T Tandemkipper- Tieflader Breitbereifung Neuwertig nakup rabljenega (65.998)

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem Low Loader ? Platform ? Trailer Immediately available | Inquiry No.: 27678 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- * GVW: 14.4t, Payload: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) Nodpfx Aeyadz Rsibjwf * 6.27m x 2.47m platform with galvanized front wall, 400mm high * Excavator bucket rest made of hardwood, bolted to the front wall * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized grid grating, anti-slip design, can be pushed together to approx. 20 mm, secured by retaining rods and diagonal supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled with hole pattern for lashing equipment, lashing force per point LC 2000 daN with a minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN at approx. 600 mm intervals possible) with close cross profiling, high-webbed front and rear closures and rear drive-on slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN, retractable into existing hole grid in outer frame, additionally * Further lashing points by drilled holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmember * Toolbox in front of the bulkhead * Side marker lights with indicator function * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * 2 container locks recessed in the front crossmember * Height-adjustable telescopic landing gear at the front, fold-down supports at the rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable; 50 mm eye available on request * 1 removable LED warning beacon at the rear ---- * Leasing, hire-purchase, financing, trade-in possible * For example: 515 euros at 60 months term, no down payment, no final installment * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside opening hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in possible

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Njdpfx Ajx Ipapoibswf * Parabolic springs with compensating aggregate ----Drawbar / Drawbar Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at rear ----General Attachments: * Support winch in front * Externally mounted hot-dip galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device * Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall * Rear stanchions bolted * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill) ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring at each front and rear corner * Various drill holes in front wall and end sill for 1.2 t lashing options ----Ramps: * One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tank, and flanged drawbar eye painted black * Sidewalls painted RAL 9010 pure white ----Info: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * First inspection (ETÜ) - TA -R 14.4 ----Brake System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm total length * 40 mm flange-type towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * 15-pin electrical connector * LED rear lights 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, externally mounted on the front right end wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Preparation in front of the bulkhead for later installation of container locks Nwsdpfxex Ipbao Aibjf * Bolted smooth steel bulkhead * Foldable steel side walls with trapezoidal profile, with drop-side spring assist * Removable steel rear wall, stowable inside at the front of the bulkhead when not in use * Bolted rear stanchions * Rear ramp bevel approx. 860 mm ----Flooring: * 50 mm softwood flooring * 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the ramp bevel and on the exterior of the low loader platform (from front bulkhead to rear cross member) ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various drillings in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 870 mm (collapsible to 20 mm thickness) ----Paint Finish: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tanks, and flange eye painted in black * Side walls painted in RAL 9010 pure white ----Information: * Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available ex Eggerstorf

Stanje: novo, največja dovoljena obremenitev: 10.970 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, KA-TA-R 14.4 - LKW tandem trostrani kiper - Nosivost serijski cca: 11.050 kg - Povećanje ukupne dozvoljene mase na 14,4 t kod guma 285/70R19.5 - Unutrašnje dimenzije: 5.000 x 2.420 x 500 mm - Visina poda pod opterećenjem: 1.040 mm - 1 šasija sa zaštitom od podletanja, vruće pocinkovana - Lakiranje: osovine sa oprugama, vazdušni rezervoari itd. u crnoj boji - 3 para upuštenih i preklopnih veznih kuka u čeličnom podu, LC 3.000 daN - ABS 2S/2M, 24 volti - 2 podizne opruge za čelične bočne stranice visine 500 mm - 1 centralno zaključavanje levo i desno, njihajuće kod nepreklopnih bočnih stranica Dodatna oprema: 1 par UVV veznih prstenova upuštenih u čelični pod, umesto na čelični pod 1 čelični pod od Hardoxa 450, debljine 4 mm Podešavanje visine vučne ruke preko ugaonog prenosa sa ručnim pogonom umesto serijskog 1 par alu rampi bez ivica (8,0 t/par), 3.500 x 400 x 105 mm pogodno za pneumaticima i guseničarima Nwjdpfx Asxmwiysibsf Kutija za alat

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads ----Suspension: Nwedpfx Asykx I Hoibof * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional trailing axle lock, operable from the cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10; lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lowering function as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck instrument cluster via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * Flashing side marker lights * LED reverse lights, activated via reverse gear * SmartBoard mounted as an infotool with pressure sensors exclusively for total axle load indication * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as a carrier for connection cables in front of the front bulkhead ----Warning System Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear inclined section – 700 mm long – on the saddle platform to the low-bed with checker plate surface and at the end a perforated strip for hanging aluminum loading ramps * Tread plate covers above the wheels * SP-Combo Package: Tool box with 45° corners, made of galvanized steel and additionally powder-coated in RAL 9006 white aluminum, on the saddle platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the slanted corners * Fold-down aluminum side walls, 500 mm high, on the saddle platform, including rear stakes, foldable and removable * Inserted aluminum rear wall, 150 mm high * 2nd kingpin position * Prepared for container locks * Prepared for 3 mounting shafts in the inclined section from the low-bed to the gooseneck Nwodpfx Aisykx I Tsbof * Prepared for retrofitting fold-out supports for 3 m extension by welding in receptacles on the outer frame ----Load Securing: Saddle Platform: * Front corners and forward 50 mm bores for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor towards the inclined ramp * Perforated outer frame, 45° angled with hole pattern for tie-downs (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low Loader Platform: * 2 x 16.5 t lashing rings centered directly before the inclined section to the gooseneck, recessed * Each side with 3 pairs 13.5 t and 5 pairs 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed in the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end crossmember W = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings permanently welded into the excavator arm rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per set) * Hydraulic ramp shifting on sliding tube for ramp shaft ----Hydraulics: * Hydraulic flow divider in the trailer (for lorry hydraulic pump output exceeding 40 l/min up to max. 250 l/min), climbing strips on t

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as a low-bed trailer ----Brakes: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles ----Suspension: * Air suspension with lift and lower function as well as RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation on truck side required * LED tail lights 12 / 24 V * 15-pin electrical connector Nwjdpfxol Tq Nmo Aibjf ----General Attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet, 960 x 300 x 450/400 mm * Contour marking tape, reflective on sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear collision buffers * Foldable A-board at the rear ----Loading Area: * Main frame with raised outer rails for guiding roll containers * Steel floor plate with roll recesses in the bogie area * Container length from 5,500 – 7,000 mm possible * Pneumatic 4-way clamp locking system and mechanical plug-in stop angles at front of runway, cargo securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip surface in the ramp area * Mechanical rear drop supports ----Load Securing: * 1 pair 10 t UVV lashing rings at the front wall carrier * 3 pairs 10 t UVV lashing rings laterally in outer frame * On each side 4 x 2 t cloverleaf-type lashing eyes * 4 x 8 t lashing brackets recessed in outer frame ----Ramps: * 1 pair aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Painting: * Chassis, bogie, locking parts, rear drop supports hot-dip galvanized * However, the drawbar, axles, and air tanks are painted in a shade of black ----Info: * New vehicle without initial registration with full manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available approx. from week 23/2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1: Suitable for both roll-off containers and as a low-bed trailer ----Braking system: * EBS electronic braking system * Emergency release device for spring brake cylinders Nwjdpfx Aijl Tpc Asbsf * Drum brakes ----Axles: * 2 x 10 t axles ----Suspension: * Air suspension with lift and lower mechanism as well as RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * Tyre pressure monitoring with display in the truck via EBS signal (no truck-side installation required) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic collision bumpers * Foldable 'A' sign at the rear ----Loading platform: * Main frame with raised outer frame for guiding roll-off containers * Steel sheet floor with roll recesses in bogie area * Container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical plug-in stops at the front in the running track, load securing certificate according to DIN 30722-1 * Welded bead as anti-slip coating in the ramp area * Mechanical drop supports at the rear ----Load securing: * 1 pair 10 t UVV lashing rings at the front on the front wall support * 3 pairs of 10 t UVV lashing rings on the sides in the outer frame * On each side, 4 x 2 t cloverleaf style lashing eyes * 4 x 8 t lashing brackets recessed in the outer frame ----Ramps: * 1 pair of aluminium access ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear drop supports hot-dip galvanized * But the drawbar, axles, and air tanks painted black ----Information: * New vehicle without initial registration, full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available approx. from CW 23 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * Wabco EBS * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem balance unit * Approx. 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin electrical connector * LED tail lights * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, right-hand side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel platform - 3-way tipper body * Continuous side walls at the top with internal tube reinforcement - without center stanchions - can be folded down, including drop-side spring support * Tailgate can be folded down and used as a swinging gate via manual central locking * Hot-dip galvanized bolted rear stanchions * 1 x 5 t lashing ring in each corner, 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm fine-grain steel floor plate * Net hooks, mounting rail at the rear for drive-on ramps * Prepared for later retrofitting with side wall extensions Nwjdpfel Th A Esx Aibjf * Reinforced body with load securing certificate according to EN 12642 XL * 2-step access on the left side as an access aid * 1 pair of aluminum drive-on ramps approx. 3,570 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis * Axles, springs, air reservoir and landing gear painted black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * New vehicle without first registration, with manufacturer warranty * Tires: 385/55 R 22.5 * Side wall paint finish in RAL 9010 pure white * Side wall painting in a RAL color available at extra charge * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * Wabco EBS (Electronic Braking System) * RDÜ (Tyre Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Adjustable hot-dip galvanized drawbar (approx. 300 mm height adjustment) with 40 mm flange towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical hot-dip galvanized folding supports * 15-pin electrical connector * LED rear lights * Hot-dip galvanized bolted underride guard * Galvanized sheet steel toolbox on the right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel 3-way tipper body for pallets * Continuous upper side walls with interior tube reinforcement, without center posts, foldable with drop side spring lift-assist * Rear gate foldable and swinging, secured by manual central locking system * Bolt-on, hot-dip galvanized rear corner posts * Each corner fitted with 1 x 5 t lashing point, plus 4 x 3 t lashing rings per side integrated into the outer frame Njdov Dz N Nepfx Aibowf * 4 mm fine-grain steel floor plate * Mesh hooks and mounting rail at the rear for loading ramps * Prepared for later retrofit of side wall extensions * Body reinforced with load securing certificate according to EN 12642 XL * Two-step access on the left side for easier entry * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity: 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear, integrated under the cargo bed into the chassis * Axles, springs, air tanks, and landing gear painted in black * Chassis, drawbar, flooring, front wall, and folding supports hot-dip galvanized * New vehicle without initial registration, with manufacturer’s warranty * Tires: 385/55 R 22.5 * Drop sides painted RAL 9010 pure white * Side walls painting in any RAL color available at extra cost * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on towing eye ----General attachments: * Jost landing gear at the front * Side underrun protection * Foldable A-panel at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions * Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear ----Loading edge: * Unloaded loading edge approx. 710 mm ----Load securing: * 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices Nwjdpfsl Th Eysx Aibjf * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * The axles, springs, landing gear, and air tank painted in a black tone ----General information: * Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing ring * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located in the central locking storage areas, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with continuous side walls, upper section reinforced with internal tube, without central stakes, fold-down sides with drop-side spring assist * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270°, not foldable, with additional pivot frame for automatic rear door opening during tipping, locking by galvanized rotary bar lock at the rear and central locking, deactivation function for the automatic rear door when reversing with open swing doors * Each corner with 1 x 5 t lashing point, plus 4 x 3 t recessed lashing rings per side in the outer frame * 4 mm fine-grain steel floor plate * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area at the rear * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanized * Axles, suspension, air tank, and landing gear painted in black Nwedpfxjl Th Hts Aibof * Tires: 285/70 19.5 * Sideboard paint finish in RAL 9010 pure white * Additional color options for side walls in RAL colors available at extra cost * Vehicle has a day registration (not in use) * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Lateral underrun protection * Foldable A-frame shield at the rear ----Electrics / Lighting: * 15-pin power socket * Multi-chamber taillights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood Nwjdpfsl Th Dmjx Aibef * 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each * Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unloaded loading height approx. 710 mm ----Load Securing: * 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips * Each side with 1 x (13.5 t) UVV tie-down point for securing lashings * 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paint / Finish: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm front right side on the chassis * 15-pin power socket * Multi-chamber tail lights * Bolted underrun protection Nwsdpfx Aol Th Dujibsf * Plastic quarter mudguards * Net hooks installed at each locking point of the central locking system, plus 2 hooks on the front wall * Chassis made of fine-grained steel * Steel pallet three-way tipper body with continuous side walls, internal tube reinforcement, no center posts, foldable with drop-side spring assist * Rear posts bolted * Combination steel wing-door tailgate, asymmetrically split with 2 leaves, can be swung and locked to 270°, not foldable; with additional pendulum frame for automatic tailgate opening during tipping, rear locking with galvanized rotary bolt and central locking system, deactivation function for automatic tailgate function when tipping backwards with open wing door * Each corner fitted with 1 x 5 t lashing ring, and each side with 4 x 3 t lashing points recessed in the outer frame * 4 mm fine grain steel floor plate * Rear mounting rail for loading ramps * Reinforced structure with cargo securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment from the rear, recessed under the loading area in the chassis for storing the ramps * Chassis, drawbar, underrun protection, rear post, and rear folding supports galvanized * Axles, springs, air tank, and landing gear painted black * Tires 285/70 R 19.5 * Drop-sides painted RAL 9010 pure white * Sidewall painting available in an RAL color of your choice for an additional charge * Vehicle has day registration (unused) * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.140 kg, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, vzmetenje: jeklo, velikost pnevmatike: 285/ 70 R 19,5, medosna razdalja: 1.140 mm, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, - TM-TA 14.4: - incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, each side with eyelet and quick shortener, Y-special design, 6.3 t - Tension force with load securing certificate - Wabco EBS - RDÜ tire pressure monitoring system - Emergency release device for spring actuators - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with equalizing unit - Jost landing gear at the front - 2 external drop-down support legs at the rear - Height-adjustable, hot-dip galvanized drawbar +/- 150 mm Nsdpfxjxuhy Es Aibjwf - Hot-dip galvanized chassis - 15-pin power connector - LED tail lights - Closed single plastic mudguards - Folding A-sign at the rear - Plastic collision protection buffers on the underride guard - Hot-dip galvanized underride protection with integrated chain storage boxes (W=370 mm x D=420 mm x H=480 mm) front left & right - 2 repositionable skip stops for lateral centering of skips - Skip stops at the front with pendulum stops, insertable in 4 positions - On each side, 2 x 5.3 t UVV lashing rings for attaching tie-down elements - Axles, springs, air tanks, and landing gear painted in black - Subject to errors and prior sale - New vehicle with manufacturer’s warranty - Available from week 05/2026

Stanje: skoraj kot novo (rabljeno), največja dovoljena obremenitev: 14.400 kg, skupna masa: 12.080 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 285/70R19.5, medosna razdalja: 1.140 mm, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2022, - ETM-TA 14.4: - Wabco ABS braking system - Emergency release system for spring-loaded cylinders - Drum brakes, 2 x 7 t Gigant axles - Parabolic springs with tandem balance unit - Height-adjustable drawbar (+/- 150 mm) with 40 mm bolt-type towing eye Nwedjxvbcpjpfx Aibsf - Jost landing gear at front, side underrun protection - Foldable A-panel at rear - 15-pin electrical connector, multi-chamber tail lights - Fixed steel front and side walls - Removable steel tailgate - Floor made of 50 mm softwood - 1 sliding wear plate 750 x 1,000 mm in the front area incl. 2 drop-in skip stops at the front, adjustable in 2 positions - 4 repositionable skip stops, adjustable in 2 positions, for lateral centering of containers - 1 x (13.5 t) UVV lashing eye per side for attaching tensioning elements - 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tension force 6,300 kg) - Rear crossmember for attaching aluminium loading ramps incl. 2 additional rear drop legs - Loading edge (unladen): approx. 710 mm - Chassis, front wall, side walls, mudguards, drawbar, and rear drop legs hot-dip galvanized - Axles, springs, landing gear, and air reservoir painted black - Tyres: 285/70R19.5 - Wheelbase: 1,140 mm - Loading edge (unladen): approx. 710 mm - Colour: hot-dip galvanized - Vehicle with one-day registration (06/2024), not loaded/used due to missing tyre pressure monitoring system - New vehicle with manufacturer's warranty - Errors and prior sale excepted - Immediately available ex Egestorf on the A7

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.140 kg, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 285/ 70 R 19,5, medosna razdalja: 1.140 mm, Leto izdelave: 2026, - TM-TA 14.4: - Wabco EBS (Electronic Braking System) Nwedsxu Hplepfx Aibjf - RDÜ Tire Monitoring System - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7-ton Gigant axles - Parabolic springs with compensation unit - Jost landing gear at the front, 2 x external drop-down supports at the rear - Height-adjustable +/- 150 mm hot-dip galvanized drawbar - Hot-dip galvanized chassis - 15-pin power connector - LED tail lights - Enclosed single plastic mudguards - Foldable A-sign at the rear - Plastic impact bumpers on underrun protection - Hot-dip galvanized underrun protection with integrated chain compartment B = 370 mm x D = 420 mm x H = 480 mm, front left & right - 2 repositionable skip stops for lateral centering of the skips - Front skip stops with 4-position swing-type bolts - Each side with 2 x 5.3-ton UVV lashing rings for attaching tensioning devices - Axles, springs, air tanks, and landing gear painted in black - Subject to errors and prior sale - New vehicle with manufacturer's warranty - Available from CW 05 / 2026

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2025, * ETS-TA-B 11,9: * Wabco EBS (elektronisches Bremssystem) * RDÜ (Reifendrucküberwachung) * Trommelbremsen, 2 x 5,5 t Gigant Achsen * Parabelfedern mit Ausgleichsaggregat * Zugrohr höhenverstellbar um 300 mm Nwedpfjwyhzvox Aibef * BPW Stützwinde * Mechanische Fallstützen hinten * Kunststoff-Werkzeugkasten vorn rechts an der Stirnwand * Seitlicher Anfahrschutz * LED-Beleuchtung * 50 mm Nadelholzboden * In den Ecken vor der Stirnwand und dem Abschlussträger jeweils 1 x 6,3 t Zurring sowie seitlich jeweils 2 6,3 t UVV-Zurringe im Außenrahmen eingelassen * Einteilige mechanische Gitterrost-Auffahrrampen mit Federmechanismus für Einmannbetrieb, ca. 2.350 x 870 mm (Innenabstand 20 mm, Rampen sind nicht verschiebbar) * Stirnwand, Seitenwände, Kotflügel und Zugrohr feuerverzinkt * Achsen, Federn, Luftkessel, Stützwinde vorn in Schwarz lackiert * Neufahrzeug mit voller Herstellergewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Sofort ab Egestorf lieferbar.

Stanje: novo, največja dovoljena obremenitev: 8.500 kg, skupna masa: 11.990 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable (by 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye Nwedpsq Hg D Hofx Aibef * Jost mechanical landing gear at the front * Two mechanical, hot-dip galvanized folding support legs at the rear * 15-pin electrical connector * Multi-chamber tail lamps * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized steel sheet, mounted on right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous white-painted side walls at the top with internal tube reinforcement; foldable without center posts, with drop-side spring assist * Tailgate foldable and swinging, equipped with manual central locking * Hot-dip galvanized bolted rear stakes * Each corner equipped with 1 x 5 t lashing point and each side with 4 x 3 t lashing rings flush-mounted in the outer frame * 4 mm fine grain steel floor plate * Mesh hooks * Rear mounting rail for loading ramps * Removable steel side extensions, 500 mm high, 3 sides, swinging * Body reinforced and certified for load securing according to EN 12642 XL * 1 pair of aluminum drive-on ramps approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed into the chassis below the loading area * Axles, springs, air tanks and landing gear painted in black * Tires 285/70 R 19.5 * Side panel color in RAL 9010 pure white * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Immediately available ex-stock Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2024, * ETS-TA-B 11,9: * Wabco EBS (elektronisches Bremssystem) * RDÜ (Reifendrucküberwachung) * Trommelbremsen, 2 x 5,5 t Gigant Achsen * Parabelfedern mit Ausgleichsaggregat * ca. 300 mm höhenverstellbares Zugrohr Nsdpfx Aijwyhzpsbowf * BPW Stützwinde * mechanische Fallstützen hinten * Kunststoff-Werkzeugkasten vorne rechts an der Stirnwand * seitlicher Anfahrschutz * LED-Beleuchtung * 50 mm Nadelholzboden * in den Ecken vor der Stirnwand und am Abschlussträger jeweils 1 x 6,3 t Zurröse sowie seitlich je 2 x 6,3 t UVV-Zurringe im Außenrahmen eingelassen * einteilige mechanische Gitterrost-Auffahrrampen mit Federmechanismus für Einmannbetrieb ca. 2.350 x 870 mm (Innenabstand 20 mm, Rampen nicht verschiebbar) * Stirnwand, Seitenwände, Kotflügel und Zugrohr feuerverzinkt * Achsen, Federn, Luftkessel, Stützwinde vorne in einem Schwarzton lackiert * Neufahrzeug mit voller Herstellergewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Sofort lieferbar ab Egestorf

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Nwodpey Etl Rofx Aibof

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Nwjdpjyy I U Nofx Aibjf

Stanje: rabljeno, lastna masa: 8.680 kg, največja dovoljena obremenitev: 31.320 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, vzmetenje: drugo, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Privezne ušesca, ABS, razširitev z opozorilnimi tablami, vozilo se prodaja po naročilu., -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih podatkov, vzorčne slike --, Več podatkov na: !, More Details: ! Nsdpfjyy I Uvjx Aibowf

Stanje: rabljeno, največja dovoljena obremenitev: 39.500 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2010, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 9.345 mm, Leto izdelave: 2010, * Müller Mitteltal T50 Compact * Low loader * Ramps * Tires: see pictures * 5 axles * Gigant axles * Permissible total weight: 50,000 kg * Unladen weight: 10,500 kg * Payload: 39,500 kg * Air suspension * Immediately available * Subject to error We offer: Net purchase for companies from the EU with VAT number as well as customers from third countries. Leasing and financing. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to port. Nwsdpfxjyzlyxo Aibof All prices quoted on classifieds are gross prices and already include the statutory VAT of 19%.

Stanje: rabljeno, konfiguracija osi: 2 osi, Leto izdelave: 2002, Kiper-nizkopodni kombi. Dozvoljena ukupna masa 10.500 kg, nosivost 7.550 kg. Trosmerna kiperska nadogradnja, dimenzije otprilike 5.000 x 2.420 x 400 mm (unutrašnje), 4 ušice za vezivanje tereta, bočne stranice od čelika, viseće i preklopne, sa centralnim zaključavanjem. 1 par aluminijumskih utovarnih rampi u bravom zaključanim pregradama ispod sanduka kipa. Visina utovara u praznom stanju oko 900 mm. Dvostepena potporna noga napred, sklopive zadnje potpore. Vučna kuka prečnika 40 mm, vučna ruda sa besprekornim podešavanjem visine. Dvovodna pneumatska kočnica, jednovodna hidraulika, 24 V. BPW osovine, parabolične opruge, ABS. Pneumatici 235-75R17.5. Šasija siva, kip most zelene boje. Tehnički pregled važi do juna 2026. Prodaja u viđenom stanju. Aluminijumske rampe = Dodatne informacije = Nwedpeyw Hw Rsfx Aibof Vlastita masa: 2.950 kg Nosivost: 7.550 kg Dozvoljena ukupna masa: 10.500 kg Pneumatici napred: 235-75R17.5 Pneumatici nazad: 235-75R17.5 Zemlja porekla: Nemačka Kontakt osoba: Jan-Marc Schwickert za dodatne informacije.