Hrd 4.Achs Tieflader Hydr. Rampen 2Nla Lift. -17,2M nakup rabljenega (47.125)

Stanje: rabljeno, največja dovoljena obremenitev: 44.980 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2024, naslednji pregled (TÜV): 09/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Rsdpfolthguex Adqsu Excerpt of the equipment list. Complete equipment details available upon request. Chassis, cranked * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, robust outer frame * 4-axle configuration. Wheel arch covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodised aluminum * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special design in the cranked area for maximum low-bed length in combination with AluLeg drop supports instead of telescopic landing gears, maximum rear swing radius of the tractor unit approx. 2,100 mm Special superstructure with rear stake extension * Self-supporting aluminium roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable to approx. 4,200 mm * Three sliding stakes per side with spring-assisted tension relief * Additional central stake locks in the roof beam and parking position, operated via pull cord and spring latch * Mechanically height-adjustable roof lift, adjustment height approx. 400 mm, can be operated from either side or single side without needing to open the opposite side and doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with stake height adjustment * Front overlap at bulkhead for driving under tarpaulin up to an overall height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on each side, 450 mm pockets below, above 4 rows of single pockets * In the high bed, only 3 rows of slats. Intermediate distances evenly distributed Floor * approx. 27 mm special water-resistant bonded beech plywood, non-slip surface * Steel plate in wheel arch area * Forklift accessible per DIN ? standard * Outer frame surface flush Brakes * WABCO air brake system with EBS complying with EC Directive 71/320 EEC incl. PREV (park-release safety valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display Axles * 4 x 10,000 kg SAF/Sauer with drum brakes, low loader specification * Air suspension with raise/lower function, total lift approx. 230 mm * Third and fourth axles are friction-steered trailing axles with electrical and mechanical locking Twin tires * 235/75 R 17.5, -16, incl. spare wheel holder. Without spare wheel Paintwork * Chassis in RAL 3002 red, solid color * Central stakes and axles KTL coated black * Corner posts galvanized finish * Plastic parts black * Galvanized parts unpainted * Rims in factory silver * Bodywork solid color per RAL shade Included special equipment * Air suspension with ECAS control, operated at the trailer * Oversize signage front and rear, galvanized, infinitely extendable, with marker lights incl. plug-in sockets for revolving beacons (small panels) * Additional unlocking for sliding roof frame from outside * 4 stake adapters for special outer frame profile, for flexible locking of central stakes * PVC sliding tarpaulin, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize/height version, flat hooks, tarpaulin folds, closures with safety pawl / OCS * Left rear telescopic plug-in socket for revolving beacon incl. beacon * Outer frame for machine transport with approx. 64 securing points in 2,000 kg, 3,000 kg and 10,000 kg versions, according to construction release drawing * 1

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf Rsdpfsl Tlhrex Adqju

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering function as well as return-to-ride valve * Pressure gauge for axle load determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panels front and rear * Front axle: plastic quarter mudguards with spray guards * Rear axle: straight, galvanized steel side skirts with spray guards * Reflective contour marking tape, side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reverse lights (controlled by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section ahead of turntable platform approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye left & right in front of front bulkhead support, 4 holes per side in the turntable platform for 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the end support, 4 pairs per side of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and recessed in the outer frame, 3 stake pockets per side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out outriggers for 3 m overall width (not in the rear slope) * Plank holder for extensions mounted longitudinally under the chassis on the left * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, with 2 pairs per side of 6.4 t lashing eyes in the excavator arm rest * Hardwood floor on the running surfaces of the low bed platform * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer boards of the loading ramps made of hardwood * Steel construction prepared for 6-valve control block * Loading edge unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, and drawbar painted in black shade-- * Tires 235/75 R 17.5 * The vehicle has a day registration from 07/2024, due to the lack of a tire pressure monitoring system, and has not been loaded or used * New vehicle with manufacturer's warranty Rjdpel Tnu Asfx Adqou * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 28.020 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, naslednji pregled (TÜV): 06/2028, Leto izdelave: 2018, Numéro de véhicule interne : VTC30021 Véhicule allemand Disponible immédiatement sur notre site à Kaufungen - Kassel, Allemagne Rodpoywqlfofx Adqeu Plus d’informations auprès de : * Luis Lucena (Allemand, Anglais, Espagnol, Français) * Viktoria Sologubova (Polonais, Russe, Ukrainien, Anglais) Exemple de financement : * Numéro interne : VTC * Prix d’achat : 35 900,00 € * Apport initial : 10 % * Durée : 60 mois * Mensualité : 560,02 € * Valeur résiduelle : 6 380,00 € Si cette offre vous convient ou si vous souhaitez l’adapter à vos besoins, contactez-nous (M. Enchev). Nous attendons votre appel avec impatience Sous réserve d’erreurs et d’omissions Nous reprenons volontiers votre véhicule d’occasion en reprise. Financement possible directement auprès de notre société. GOLEC NUTZFAHRZEUGE GMBH Nous parlons : allemand, anglais, espagnol, polonais, ukrainien, russe, bulgare.

Stanje: novo, največja dovoljena obremenitev: 30.540 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.990 mm, skupna širina: 2.550 mm, skupna višina: 1.010 mm, Leto izdelave: 2025, Oprema: ABS, SCHWARZMÜLLER 3-Axle Flatbed Semi-Trailer RH100 – Extendable – For building materials and construction machinery transport NEW VEHICLE Gross weight (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Empty weight approx. 9 t (+/- DIN tolerance) Flatbed length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Flatbed width approx. 2,540 mm Loading height front approx. 1,060 mm at coupling height approx. 980 mm, rear 1,010 mm Extendable lightweight steel welded frame construction Extension length approx. 4,000 mm, lockable at intervals of approx. 500 mm Reinforced version for building material transport, 20 t/5m at centre of gravity; construction machine transport up to 20 t (in retracted position) Reinforced U-profile outer frame 6 mm Tapered cross-members 4 mm Bevelled frame at rear, approx. 15°, approx. 500 mm Visual indicator for pneumatic frame locking on both sides, with green control lamp = indicator light for pneumatic frame locking at front left of the fifth wheel Energy guiding chain in central frame Frame locking with integrated lubrication strip 4 pairs of extendable 8 t lashing rings, rear 9 pairs of extendable 10 t lashing rings in outer frame profile, foldable outward on both sides for oversize cargo lashing 10 pairs of lashing mushrooms with welded round steel at lower edge of outer frame 6 pairs of insert sleeves with reinforcement bar for square tube side stanchions 80x50x5 mm (longitudinal, approx. 3 mm clearance), on both sides of outer frame 3 insert sleeve cross-members for side stanchions 80x80 mm, located at central cross-members Rjdpfjwfu N Rex Adqou Insert sleeve cross-members as empty holders for stanchions 6 pairs of sunken container locks for: 2 x 20 ft containers 1 x 20 ft container central 2 x 20 ft containers 1 x 30 ft container Reinforced rear end plate with continuous ramp hanger rail Mechanical 2 x 12 t landing legs, single-sided operation + compensation 2 drop support legs at rear SAF Intradisc B9 axles with 370 mm disc brakes (19.5" discs), Load capacity 9 t/axle, on-road specification Axle spacing 1,310 + 1,410 mm Wheelbase 7,650 mm SAF steering trailing axle with kingpin/bushing approx. 10° steering angle, automatic electro-pneumatic reverse lock, engages automatically in reverse, additional cab switch with release valve Special axle lift on 1st axle, automatic raise/lower depending on weight, with forced lowering, start assist via cab button / "3 x brake" Kilometre counter 6x tyres 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Brake system according to EC Directive 71/320 ECE R13 2-line air brake system, EBS system 2S2M, one axle with sensors RSS/RSP stability programme Spring-loaded parking brake Steel air tanks Air suspension with lifting and lowering device, total stroke approx. 200 mm Automatic ride height 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, package "BASIC" Axle load display via EBS CAN bus signal Tyre pressure monitoring according to ECE Regulation 141 35 mm wooden floor, longitudinal over wheels with steel checker plate cover Wooden floor impregnated both sides Reinforced steel front wall approx. 1,800 mm + centre supports integrated into front wall 2 lashing eyes top of corner posts Front steel corner posts integrated into front wall, front (clear side loading length) 24-volt lighting system according to EC Directive 76/756/EWG 2 units full-LED multifunction tail lights "Aspöck" with integrated control unit Flashing LED side marker

Stanje: rabljeno, lastna masa: 8.550 kg, največja dovoljena obremenitev: 27.450 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2021, dolžina tovornega prostora: 12.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rdeča, Leto izdelave: 2020, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, zračno vzmetenje, 1. os dvižna, ABS (protiblokirni sistem), hidravlične rampe, zadnje podpore, podporniki. 9 t osi, bobnaste zavore, višina nalagalne površine cca 880-950 mm, razširljivo na 3.050 mm, dolžina nizkega ležišča 8.800 mm, dolžina labodjega vratu 4.000 mm, skupna masa pri 3-osnem vlačilcu 42.000 kg, nosilnost 31.290 kg, RAL 3003. PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Rsdpfoy Sbngex Adqsu

Stanje: rabljeno, največja dovoljena obremenitev: 30.700 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2002, Oprema: ABS, * MüllerMitteltal nizkopodni priklopnik s 4 osmi T40 * 2x krmiljeni vrtljivi osi * Nemška prikolica Redpfx Adoyuri Ejqou * pero * hidravlično pomične rampe / levo-desno * deljene preklopne rampe * možnost razširitve * ABS * BPW osi * 40 t * lastna teža: 9300 kg * osne obremenitve = 10 t na os * popolnoma funkcionalen * pnevmatike v redu

Stanje: rabljeno, največja dovoljena obremenitev: 31.050 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2016, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.650 mm, Oprema: ABS, * Schwarzmüller 4-osni nizkopodni priklopnik z dvojnimi hidravličnimi zložljivimi rampami - visoko priklopljen s 50 mm obročem * Zračno vzmetenje - BPW osi - kolutne zavore - pnevmatike: 245/70R17,5 * Skupna dolžina: 11.900 mm - širina: 2.500 mm (možno do 3.000 mm) - višina: 3.650 mm * Dovoljena skupna masa: 40.000 kg - lastna masa: 8.950 kg - nosilnost: 31.050 kg * Nemško vozilo - nemški prometni list - takoj na voljo - iz prve roke Rsdpfx Adjy Dy Eneqou * Leva zadnja hidravlična podporna noga potrebuje popravilo * Za ogled prosimo, da se dogovorite za termin * Kontaktna oseba: gospod Andreas Vogel * Podatki na internetu so nezavezujoči opisi. * Ne predstavljajo zagotovljenih lastnosti. * Prodajalec ne odgovarja za tipkarske ali prenosne napake podatkov. * Pridržujemo si pravico do sprememb, napak in predhodne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 27.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2005, Leto izdelave: 2005, Oprema: ABS, Empl 3-osna nizkopodni priklopnik, zadnja os prisilno vodena, hidravlične dvojne rampe preko lastne NATO hidravlične črpalke. Lastna teža: 7.300 kg Nosilnost: 27.700 kg Dolžina: 13,2 m Stanje: zelo dobro Pnevmatike: 70% Redpsx Sbpqjfx Adqju

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.050 mm, skupna širina: 2.550 mm, Oprema: ABS, Meusburger MPG-3 Nizkopodnožno prikolica s ponjavo, krmiljena/dvigljiva os Oprema: zračno vzmetenje * Tehtnica za os * 1. os dvigljiva * 3. os krmiljena * Hidravlična rampa z dodatno podporo in daljinskim upravljanjem * Prehodna rampa * Električni vitel z daljinskim upravljanjem * Edscha streha * Stranski zaboji za shranjevanje * Rezervno kolo s standardno pnevmatiko * Dodatni žarometi * Izvlečne table za izredne širine Varnost: ABS * EBS Rjdpfxjwfwd Do Adqju * Kolutne zavore Pridržujemo si pravico do napak in predhodne prodaje. Interna številka vozila: 8303

Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan Skupna masa 24.000 kg / 30.000 kg Nosilnost 17.920 kg / 23.920 kg Lastna teža 6.080 kg Skupna dolžina 10.900 mm Nakladalna dolžina 8.680 mm Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom Parabolično vzmetenje Dolge rampe 2.800 mm s hidravličnim upravljanjem Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton Redpfexb Nmyex Adqou 5 parov žepov za nosilce Vlečni obroč 40 mm plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV. Mesečna najemnina: 500,00 EUR

Stanje: novo, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, vzmetenje: drugo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Bed height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,600 mm long x 900 mm wide), 10 lashing rings (2 t) on the outer frame, 8 lashing boxes (5 t) in the corners, gearbox support winch with load and quick mode, front, 2 folding supports, rear, chassis and superstructure hot-dip galvanized, extra charge for resting cradle for milling conveyor €600, also available from stock with mechanical ramps!, -- subject to errors, mistakes and changes, sample images --, More details at: ! Rjdoza A Nyspfx Adqju

Stanje: novo, lastna masa: 10.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 para kolesnih vdolbin z pokrovom, ABS, zračno vzmetenje z dvižnim in spustnim mehanizmom, tehtnice za osno obremenitev, skupna dolžina nakladalne površine cca: 9.100 mm, spuščeni del (tiefbett) cca 6.900 mm dolg, višina nakladanja pri obremenitvi cca 890 mm, 24 x pritrdilna ušesa po 10 t, 40 x pritrdilna ušesa po 3 t, nakladalne rampe (cca 3.100 x 760 mm), nedrseči trak na zunanji strani ramp in zadnjem naklonu, rampe lateralno nastavljive, lesena tla debeline 68 mm, škatla s pokrovom za verige za pritrditev ali napenjalne trakove, označevanje obrisa po predpisih, opozorilna rotacijska luč, vzmetna (Federspeicher) parkirna zavora, vključuje prikazovalnike obremenitve osi, podvozje popolnoma vroče pocinkano, , doplačilo za: hidravlično premikanje ramp = cena: 1.000 €, , --  Pridržane pravice do tiskarskih napak, sprememb in pomot, slike so vzorčne --, Več podatkov na: !, Več podrobnosti: ! Rodpfx Adjzakh Dsqju

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, air suspension with lifting and lowering function, axle load scales, total loading platform length approx. 9,100 mm, lowbed approx. 6,900 mm long, loaded platform height approx. 890 mm, 24 x lashing rings each rated at 10 t, 12 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outer side of ramps and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking in accordance with regulations, beacon, spring-loaded parking brake, including axle load indicators, vehicle hot-dip galvanized, -- errors, omissions and changes excepted, sample images --, More data at: !, More details: ! Redpfxjzai H Ej Adqju

Stanje: novo, lastna masa: 10.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 para odstavkov za kolesa s pokrovom, ABS, zračno vzmetenje s funkcijo dviga in spuščanja, tehtnice za osne obremenitve, skupna dolžina nakladalne površine pribl.: 10.250 mm, nizka postelja pribl.: 7.150 mm dolžine, višina nakladanja z obremenitvijo pribl. 890 mm, 24 pritrdilnih ušes po 10 t, 40 pritrdilnih ušes po 3 t, naletne rampe (pribl. 3.100 x 760 mm), protidrsni trak na zunanji strani ramp in zadnjem naklonu, stransko nastavljive rampe, lesena tla debeline 68 mm, shranjevalna škatla s pokrovom za verige ali napenjalne trakove, označevanje obrisa po predpisih, rotacijska luč, parkirna zavora s prenosom vzmeti, vključuje prikazovalnike osnih obremenitev, vozilo vroče pocinkano s potopno metodo, dodatno: hidravlično premikanje ramp = cena: 1.000 €; -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, slikovni material je informativne narave --, Več podatkov na: !, Dodatne podrobnosti: ! Rjdszacpaepfx Adqou

Stanje: rabljeno, lastna masa: 8.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl. 9.500 mm, dolžina tovorne površine nizkega ležišča pribl. 7.360 mm, višina nakladanja pribl. 910 mm, 14 parov pritrdilnih obročev, vozilo se prodaja po naročilu stranke. Pridržujemo si pravico do tiskarskih napak, sprememb in napak, slike so vzorčne. Več podatkov na zahtevo! Rjdpfx Ajy Ulfnjdqeu

Stanje: kot nova (razstavni stroj), lastna masa: 10.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 4x2, dolžina tovornega prostora: 9.220 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, Leto izdelave: 2025, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Permissible total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820-1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Permissible total weight special approval: 40,000 kg Rodjiciutjpfx Adqeu Payload special approval: approx. 30,000 kg Low bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical overall weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the low bed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the high bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the low bed Suspension Air suspension unit including raising and lowering effective on the rear axle unit Braking system Braking system according to EC directives with EBS 4S/3M in multivoltage version (12-24V), spring-loaded parking brake incl. 2 external test connections for brakes/modulator and bellows pressure Electrics LED lighting with indicator function for side marker lights, multivoltage (12-24V) Turntable Robust welded construction with low-maintenance ball race turntable Towing device Cranked drawbar with towing eye Ø 50mm, low-maintenance silent bushings including height adjustment for drawbar Frame Robust welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel recesses at the front (top length approx. 2,500 mm - depth approx. 410 mm) and at the rear (top length approx. 1,470 mm - depth approx. 370 mm); without wheel recess covers; Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cut-outs above the rear wheels with wheelbase 2,010 mm, front corners chamfered, rear climbing bars on the incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) in the outer frame high bed 1 pair of stake pockets (90x50 mm) in the outer frame low bed Floor 50 mm softwood planking (painted/impregnated) Ramps One-piece hot-dip galvanised loading ramps (3,150 mm x 750 mm) with 50 mm softwood planking (painted/impregnated), laterally adjustable, directly acting upright spring lifters for effortless operation Finishing Chassis frame hot-dip galvanised in immersion bath Support 2 folding supports at the rear left and right at the vehicle rear Equipment Folding side underrun protection, front semicircular plastic mudguards – rear straight steel mudguards with antispray, 2 wheel chocks with holders; contour markings in accordance with ECE Directive R48 Front wheel recess cover with 3 pairs of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00888 Hardwood planking for front wheel recess cover Rear wheel recess cover with 1 pair of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00897 Hardwood planking for rear wheel recess cover 3 pairs of screwed lashing rings 6 t 3 m equipment package without incline B=11,200 Folding extension with softwood boards 970.04199-36 LED warning package HTD cranked Aspöck warning boards 4-fold, electrics and revolving beacon 1 pair of storage compartments for wooden boards 3 m package (2 pieces moun

Stanje: rabljeno, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2007, Oprema: ABS, Vehicle Identification Number: XL942N5SA7L007207 Fifth-Wheel Load: 18,000 kg – Axle Loads: 4 x 10,000 kg Unladen Weight: 11,020 kg German MOT (HU) due Neck Length: 4,100 mm Coupling Height: 1,250 – 1,400 mm = Fifth-Wheel King Pin 3.5 inches Lowbed: Length: 9,400 mm, including 500 mm sliding table (600 mm of which is tapered) – Width: 2,525 mm – Loading Height: 880 mm TELESCOPIC EXTENSION by 6,300 mm EXTENDABLE WIDTH up to 3,000 mm Removable Rails Technical Axle Loads: 4 x 10,000 kg SAF Axles with Drum Brakes Axle 3,4 = SELF-STEERING AXLES Large Tool Box on the Gooseneck Central Lubrication System Rodpfey T Aq Esx Adqeu Tires: 245/70 R 17.5 Modifications, sale prior to conclusion of purchase, and errors are expressly reserved. The above description is provided for general identification purposes only and does not constitute a warranty under the law of sale. The description in the purchase contract is decisive. Our offer does not generally include a new TÜV (MOT) inspection. If a new inspection is required, we are happy to provide a quote from one of our partner workshops! The vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply.

Stanje: novo, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, vzmetenje: drugo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Bed height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,600 mm long x 900 mm wide), 10 lashing rings (2 t) on the outer frame, 8 lashing boxes (5 t) in the corners, gearbox support winch with load and quick mode, front, 2 folding supports, rear, chassis and superstructure hot-dip galvanized, extra charge for resting cradle for milling conveyor €600, also available from stock with mechanical ramps!, -- subject to errors, mistakes and changes, sample images --, More details at: ! Rjdpfsy Slyaox Adqju

Stanje: rabljeno, lastna masa: 8.650 kg, največja dovoljena obremenitev: 31.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2012, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 4.725 mm, barva: oranžna, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Osnovna barva: oranžna Dodatna oprema ABS, vzmetenje: listnate vzmeti, nosilnost (kg): 31.350 Tip nadgradnje: Goldhofer 4-osni nizkopodni priklopnik T4-2x2-32/80, BPW ECO osi z listnatimi vzmetmi, razširitve, nakladalna površina ca. 7.000 x 2.550 mm, nakladalna višina ca. 860 mm, mehanska zadnja opora, hidravlične dvižne rampe 2.850 x 700 mm, hidravlični bočni pomik, vlečna ojnica z vlečno uho 50 mm, zračni priključek Duomatik, elektrika 24 V - 2 x 7-polno, ABS Rjdpfx Asyuu Iksdqeu

Stanje: rabljeno, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, For every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front cranked frame and flat loading area, inclined at the rear approx. 500x100 mm - Frame neck 200 mm with chamfered corners Rsdpfxjzabnbe Adqeu - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the rear sloped area) - 2 kingpin settings with replaceable 2" kingpin - Outer frame closed outward as perforated external frame for lashing with tension straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Provisions for extendable load floor widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of the axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece special-design loading ramps, mechanically extendable - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lift (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wood surface - Incl. traction ribs on loading ramps - Can be secured in driving position with tension straps - Actuated via control lever mounted to the right at rear in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch wooden floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears with one-side operation and push rod compensation Axles, Steering and Tyres: - BPW air suspension axles, each 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower mechanism with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic control with mechanical emergency operation via button on the trailer - 3rd axle self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side and rear walls approx. 400 mm high on gooseneck - Spare wheel holder - Lateral aluminum side underrun protection - 4 wheel chocks with holders - Long license plate holder in end plate - 1 ECE-board insertable at the rear - 11 pairs of ZK modules 10t laterally: - 2x on the gooseneck - 9x on the loading area - Extendable warning signs incl. 3 position lights each, at front on landing gears and rear before end plate, infinitely extendable up to loading width of 4,500 mm - 4 fittings for warning signs, plug-in to pockets on loading area - 6 pairs of stake pockets at sides for stakes 100x50 mm - 2 rows of crosswise stake pockets for stakes 100x50 mm on gooseneck from outer frame inwards up to main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for stakes 100x50 mm on load area from outer frame inwards up to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber skirt mounted on underrun protection

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2020, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS * Zadnje podpore * BPW ECO-Plus osi * Oranžna opozorilna luč * Aluminijasta platišča Rodpsy T Dh Ssfx Adqju * Duomatik zračni priključek ----Nadgradnja: Pocinčan nizkopodestni priklopnik (2500+7300 mm)/Višina nakladanja cca 900 mm, zadaj znižan/Naklonska višina cca 770 mm, jeklen/lesen pod in protidrsna prevleka, razširljiv na 3 m, hidravlične nakladalne rampe (zložljive za nizek nakladalni kot) s protidrsno prevleko, tudi hidravlično bočno pomične, pričvrstitveni obroči Prodaja le pravnim osebam. PRI IZVOZU JE TREBA PLAČATI SAMO NETO CENO!!!! VSE INFORMACIJE SO BREZ JAMSTVA, VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte impressum).

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lowering system as well as Ride-height Control Valve ----Drawbar: * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring and turnbuckle ----Electrics / Lighting: * Smart-Board mounted on trailer as an info tool (for axle load display – front and rear separately) * Tyre pressure monitoring with display capability in the truck via EBS signal, no installation required on the truck side * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear ----General Attachments: * Side underrun protection * Swivel supports at rear chassis frame * Mechanically adjustable warning board sets front and rear * Stainless steel quarter mudguards with spray protection * Straight rear axle galvanized steel mudflaps with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Box in the bogie for accessories with hinged lid, 2 fixed container locks (directly behind the bogie platform) * 2 galvanized footholds on the bogie, left and right ----Lowloader Platform: * Robot-welded anti-slip covering on the steel plate of the bogie platform (protruding weld beads) ----Load Securing (Load Securing Package includes): * 2 lashing eyes (13.4 t) front left & right on the front wall support * Front & rear 1 pair UVV lashing rings (13.4 t) as well as 3 pairs each side UVV lashing rings (10 t), pivoting and lowerable, loadable in all directions and embedded in the outer frame * 3 stake pockets each side also with 2 t lashing possibility * Profifix lashing rail longitudinally in the center, in the flat area for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding extensions for total width of 3 m (not at rear bevel) * Extension planks stored in the center of the loading area ----Ramps: * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for retrofitting hydraulic lateral ramp shifting ----Excavator Boom Support: * Excavator boom support over rear axle, continuous up to rear cross member (approx. total length 2,100 mm) * 2 pairs of lashing eyes LC 6,400 daN in the excavator boom support, mounted laterally in the longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm (air suspension) ----Paintwork: * Chassis, bogie, folding extensions, fixed supports, and access ramps hot-dip galvanized * Axles, slewing ring, air tanks, drawbar painted in black tone ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images Rodpfx Astplwiedqeu ----Delivery Time: * Available approx. from calendar week 22/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Drawbar: Rjdpfx Adjxptn Roqju * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----Electrical / Lighting: * Smart-Board infotool mounted on the trailer (for axle load display - front and rear separately) * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Side underrun protection * Swivel support legs at rear of chassis frame * Mechanically adjustable warning sign panels front and rear * Front axle: Plastic quarter mudguards with spray protection * Rear axle: Straight galvanized steel mudguards with spray protection * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Accessory box in the bogie with folding lid, 2 fixed container locks (directly behind bogie platform) * 2 galvanized entry steps on the bogie, left & right ----Low Loader Platform: * ROBOT-welded anti-slip coating to the steel plate of the bogie platform (protruding weld beads) ----Load Securing (La-Si Package consisting of): * 2 lashing eyes (13.4 t) front left & right on the front bulkhead support * Front & rear: 1 pair UVV lashing rings (13.4 t) each, and on both sides 3 pairs UVV lashing rings (10 t) each, swivelling and lowering, loadable in all directions and flush-mounted in the outer frame * 3 stake pockets per side, each providing simultaneous 2 t lashing capacity * Profifix lashing rail mounted centrally along the longitudinal axis in the flat area, rated to LC 3000 daN ----Widening: * 6 pairs mechanical folding outriggers for 3 m total width (except on the rear bevel) * Widening planks stored in the center of the loading platform ----Ramps: * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve control block for later retrofitting of hydraulic ramp shift ----Excavator Arm Rest: * Continuous excavator arm rest over rear axle up to end support (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, mounted on the longitudinal frame side ----Loading Height: * Laden: approx. 910 mm +/- 20 mm air suspension ----Coating: * Chassis, bogie, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. week 22/2026

Stanje: rabljeno, največja dovoljena obremenitev: 48.000 kg, skupna masa: 72.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2026, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, NEW!!! Full air suspension, first axle lift, fourth axle steering axle, remote-controlled and manual hydraulic support, extendable by 25 cm each, hydraulic ramps, hydraulic rear support and manual support. SAF axles. DIMENSIONS AND WEIGHTS Vehicle length: 13,560 mm Gooseneck length / Platform length: A: 9,000 mm Compatibility with towing vehicles Platform height (loaded): 1,000 mm Axle loading / Wheelbase: H: 1,360 mm King pin load / Width: 2,550 mm Loaded weight / Wheelbase: D: 7,595 mm Unladen weight (± 3%) PLATFORM AND DRIVE TECHNOLOGY DATA 3,950 mm individual drive (4x2 and 4x4) 48,000 kg (4 axles x 12 tonnes) / 24,000 kg / 72,000 kg Chassis material: High-strength I-beam frame Chassis cross members: Quality steel S355J2+N 2” king pin (1 pc) / King pin position: 2 pcs. Rjdpjyn Ux Asfx Adqeu Gooseneck type: Fixed. Standard gooseneck (internal) Chassis platform top: sides – wood; wheel tops and center – steel; gooseneck top – steel Side extension: 250 mm + 250 mm extension Galvanized lashing rings (12 tonnes) on platform sides Stake pocket slots for lashing chains FEATURES 265/70 R 19.5 steel rims 1st & 2nd ramps: Fixed; 3rd & 4th ramp (1st lift): Wabco EBS 4S/2M Ramp type: Hydraulic, retractable, one-piece Ramp additional functions: Extend & retract (hydraulic) Gooseneck ramp: Fixed, portable ramp Ramp material: Wood covering Rear gear: Manual rear support legs Front gear: Two-speed telescopic landing gear with 24t dynamic and 50t static capacity ACCESSORIES & ADDITIONAL FEATURES 1 spare tire with holder 1 wheel chock Appropriately sized toolboxes mounted on the platform sides (galvanized or painted steel) Aluminum side and rear covers at the gooseneck Plastic mat under the rear bumper 1 leveling stand (optional) / Sheet metal side extensions (optional) / 10t electric winch (optional) PAINT & BLASTING Steel shot-blasted according to SA2.5 standard. Epoxy primer applied, finished with two-layer, oven-cured full acrylic paint in standard color A. Optional chassis color available.