Hrd 4.Achs Tieflader Hydr. Rampen 2Nla Lift. -17,2M nakup rabljenega (47.151)

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles Rcjdpfxoylfvgj Ah Heb ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: rabljeno, lastna masa: 8.650 kg, največja dovoljena obremenitev: 31.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2012, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 4.725 mm, barva: oranžna, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Osnovna barva: oranžna Dodatna oprema Rcsdpfxjyuu Iks Ah Hsb ABS, vzmetenje: listnate vzmeti, nosilnost (kg): 31.350 Tip nadgradnje: Goldhofer 4-osni nizkopodni priklopnik T4-2x2-32/80, BPW ECO osi z listnatimi vzmetmi, razširitve, nakladalna površina ca. 7.000 x 2.550 mm, nakladalna višina ca. 860 mm, mehanska zadnja opora, hidravlične dvižne rampe 2.850 x 700 mm, hidravlični bočni pomik, vlečna ojnica z vlečno uho 50 mm, zračni priključek Duomatik, elektrika 24 V - 2 x 7-polno, ABS

Stanje: rabljeno, največja dovoljena obremenitev: 25.750 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2005, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Oprema: ABS, Goldhofer 2-osna nizkopodna prikolica * Gigant osi z bobnastimi zavorami * Zračno vzmetenje * Krmilne osi * Rotacijska opozorilna luč * Delovne luči * Pnevmatske gume 235/75 R17,5 Rcsdpfx Aoyn Tu Ajh Hob Pozor: Vozilo je bilo leta 2025 obnovljeno. Nova barva in popolnoma prenovljena tehnika. Za dodatne informacije smo vam na voljo.

Stanje: novo, največja dovoljena obremenitev: 26.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, WIESE 3-axle low-loader with ramps and wheel recesses ? NEW Availability approx. 4 months from order ---- Vehicle data Manufacturer: WIESE * Type: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross weight: 39,000 kg * Fifth-wheel load: 12,000 kg * Aggregate axle load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brakes: WABCO EBS with RSS ---- Dimensions * Load bed length: 13,450 mm * Low-bed length: approx. 9,550 mm * Fifth-wheel section: approx. 3,640 mm * External width: 2,550 mm * Bed height low-bed: approx. 920 mm * Fifth-wheel height: approx. 1,250 mm ---- Equipment * 3 x SAF axles (9 t) with air suspension * 1st axle with lift function * 3rd axle with trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS brake system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin + 2 x 7-pin sockets Rodpfx Ahoyuq Igo Hecb ---- Bodywork * Sturdy steel frame * 28 mm hardwood floor / Omega floor * 13 pairs of lashing rings 8,000 kg * Additional lashing points 5,000 daN * 2 pairs of wheel recesses * Digger arm recess * Aluminium plug-in side boards on the raised deck * Toolbox at the front ---- Ramps * 2 x aluminium drive-on ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting system * Sideways adjustable ---- Miscellaneous * Warning boards for overwidth up to 3 m * Contour marking in accordance with ECE-R48 * Technical documentation and TÜV certificate For further information, we are happy to assist you.

Stanje: novo, lastna masa: 9.650 kg, največja dovoljena obremenitev: 30.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.740 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 4-AXLE LOWBED TRAILER WITH TOP EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => ANTI-SLIP STRIPS ON THE REAR INCLINE OF THE RAMPS Rodpfx Ahshvxgzj Hjcb => 6 LASHING POINTS IN THE EXCAVATOR ARM TROUGH AT THE REAR SECTION => LONG ONE-PIECE LOADING RAMPS => LOW APPROACH ANGLE Perm. gross vehicle weight 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized in immersion bath Bogie frame hot-dip galvanized in immersion bath Loading ramps hot-dip galvanized in immersion bath Air suspension SAF axles with drum brakes EBS electronic braking system Tyres 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Trough for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm at rear section of lowbed 4 pairs of 10 t recessed lashing rings in lowbed 2 pairs of 10 t recessed lashing rings in highbed 4 pairs of 3 t lashing points in external frame of lowbed 3 pairs of 6 t lashing eyes on external frame 4 pairs of stake pockets in outer highbed frame 4 pairs of stake pockets in outer lowbed frame 3-metre widening package with folding outriggers, without slope 4 warning signs with lighting Rotating warning beacon at rear LARGE STEEL TOOLBOX under cargo bed 2 storage compartments with folding covers in high platform Hydraulic ramp lifters 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for cargo bed and ramps 40,000 kg GVWR only with exemption permit according to §70 => Freight costs for delivery: €2.90 plus VAT per km => Prices ex D-86368 – Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Subject to prior sale and modifications!* *Price valid ex D-86368 – Gersthofen* *Sale to business customers only!* *Images may differ and are for rough orientation only => images may show/contain accessories subject to extra charge*

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica Rcedpfxewmpbdj Ah Hjb - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, Leto izdelave: 2024, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Rcodpfxoypb Ako Ah Heb Loading platform: - Extendable loading platform, approx. 8,800 mm long, with chamfer at the rear approx. 500 mm x 10° - A recess in the loading platform and into the chamfer to accommodate the excavator's dipper stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood surface on the chamfer of the loading platform Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood inlay - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted approx. 235 mm outwards and 215 mm inwards individually - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre pressure sensors Included Accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for hydraulic operations - 1 spare wheel - Outer beams on the gooseneck with fixing holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized - 2" kingpin - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable galvanized outriggers, approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, open continuously in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminium elements fitted on the extension pipes of the outriggers - Widenable U-profiles for inserting the ALU covers - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminium elements fitted on the extension pipes of the outriggers - 1 pair of mechanical rear supports - Remote steering control from both front and rear by cable remote control, with axle single-track alignment control - 1st axle with automatic lift axle function and start assist according to EU Directive 2021/535 - Under the gooseneck and at the rear crossmember left and right: 7-pin sockets with mountings for warning plates - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the chamfered part of the loading platform outer frame - Central lubrication system with 1 pump, BEKAMAX - Radio remote control for steering in addition to cable remote - Wabco Smart Board system - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: rabljeno, največja dovoljena obremenitev: 2.000 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2016, naslednji pregled (TÜV): 11/2025, Leto izdelave: 2016, Oprema: ABS, SARIS TRAILER WITH 2-AXLE LOW LOADER WITH RAMP, TÜV VALID UNTIL 11/2025 ----VEHICLE FEATURES * TYPE: C2C * 2 AXLES * DRUM BRAKES * ADJUSTABLE RAMP * PERFECTLY SUITABLE FOR MINI EXCAVATORS, FORKLIFTS, ETC. * 4 M LONG * PERMISSIBLE TOTAL WEIGHT: 3,500 KG * UNLADEN WEIGHT: 1,500 KG * PAYLOAD: 2,000 KG * TIRE SIZE: 185 / 70 R13 * TÜV: 11 / 2025 Rsdpouidc Refx Ah Hscb * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) ----EXPORT DECLARATION / CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5-DAY, 30-DAY PLATES, AND 17–21-DAY AUSTRIA PLATES (EURO 1 DOCUMENT) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and non-EU countries, a deposit of at least €500.00 / €1,000.00 is required. Subject to change, error, and prior sale! You can find more vehicles on our website. Sales are exclusively according to our General Terms and Conditions—see website. Important Notice—Important Information: Despite careful verification of all details in our offer, errors may occur. Some can result from transmission issues with platform providers’ systems. Therefore, please note that all information is given without guarantee and does not constitute a legal claim. Legal Notice: This sales listing does not constitute an offer under §145 BGB (German Civil Code). It is provided as information to initiate a contract. The details provided are without guarantee and do not represent warranted characteristics.

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster Rcedjwviwkopfx Ah Hsb - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light Redpfx Ashlz S Nsh Hocb • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick Rodjk Aht Ujpfx Ah Hscb - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Rcodpfx Ajk Ahugsh Hjb Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) Rjdpol Uxdkjfx Ah Hecb S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon Rjdpfxoh Etf Rj Ah Hocb - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 Rcedpfel Sl Izjx Ah Hsb 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Rcsdpjmfqi Iefx Ah Hob Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: novo, največja dovoljena obremenitev: 37.619 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2025, Oprema: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture: 2025 | NEW | 40-t ramps | Top equipment Location: Germany Condition: New / unused Availability: Immediate Description: For sale: brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. --- Technical Specifications Dimensions - Total length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (extendable by +600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights - Perm. total weight at 80 km/h: 48,000 kg - Perm. total weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg Rcsdpfsx Efzuox Ah Hsb - King pin load: up to 18,000 kg --- Running Gear & Axles - 3 BPW axles, air suspension, drum brakes - 1 rear trailing axle - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tire pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area - Foldable 40-t drive-on ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45-mm hardwood floor + checker plate over wheel arches --- Load Securing - Multiple lashing points, 8,000 daN and 13,400 daN - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - Front board 450 mm, side & rear walls made of aluminium --- Body & Chassis - High-strength S700 MC steel - Partial metallisation (Zn/Al 85/15) – superior corrosion protection - Rear angle: 10°, 500 mm - 2" king pin - Mechanical support legs at the front - 45-t rear supports --- Equipment - 2× toolboxes - Rotating beacon - LED lighting - Reverse work lights - Wheel chocks - Extensions 9×2 (up to +300 mm) - Stake box - Reflective strips on sides and rear --- Colour: RAL 3020 traffic red For further information, please feel free to contact us.

Stanje: rabljeno, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, * Gigant osi * Zračno vzmetenje * Zadnja krmiljena os * Raztegljiv * Lastna teža: 10.920 kg Rsdpfx Aswta Dioh Hjcb -----Interna številka vozila: 9799----Napake in vmesna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsAppa Whatsapp nemščina, angleščina -- Whatsapp nemščina, angleščina, arabščina

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno * Sledilna krmiljena os * Hidravlične nakladalne rampe * Zračno vzmetenje -----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa Redpfx Aex I Uyhsh Hscb WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2020, dolžina tovornega prostora: 5.750 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 900 mm, medosna razdalja: 1.000 mm, vrsta prenosa: drugo, voznikova kabina: drugo, zavore: drugo, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and split loading platform * Front section with mesh extension, electrically tiltable on both sides * Behind: flatbed/platform/low loader with loading ramps * Large flatbed loading area with phenolic plywood floor and DIN lashing eyes * Ideal for landscaping, construction industry, and much more * Loading area dimensions: 3.75 m x 2.15 m x 0.35 m, aluminium loading side panels Rodpfx Asxnqv Aoh Hjcb * Payload: 2,230 kg * Tipping area dimensions: 2.00 m x 2.15 m x 0.90 m * Electric tipping drive with cable remote control * 100 km/h approval * Tipper bed with steel floor * Tridem axles * GVW: 3,500 kg * Unladen weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection is required, we will be pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that there are no misunderstandings regarding their condition and suitability. Inspection and viewing are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for mistakes or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 6,300kg Payload: 17,700kg / 23,700kg Overall length: 10,900mm Loading length: total 8,600mm; 6,500mm including rear bevel; 2,100mm gooseneck Width: 2,550mm Loading height: 900mm Further information: - Heavy-duty welded construction made from high-strength fine grain steel - Hot-dip galvanized - Rear support - Twin wheels 235/75R17.5 - Warning panels - LED reversing lights Rcedpfewrv Sajx Ah Hjb - Lashing points on outer frame - Lashing rings: 4x gooseneck, 6x low bed (10,000 daN) - Single-piece hot-dip galvanized loading ramps (3,100mm x 750mm), 50mm softwood decking, laterally adjustable - Storage box in gooseneck - Plastic toolbox - Bumper - Floor with 50mm softwood decking - Climbing strips on rear loading gradient

Stanje: rabljeno, prevoženi kilometri: 119.800 km, moč: 316 kW (429,64 KM), prva registracija: 07/2021, vrsta goriva: dizel, lastna masa: 11.180 kg, največja dovoljena obremenitev: 14.820 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x4, medosna razdalja: 4.500 mm, naslednji pregled (TÜV): 05/2026, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, centralno zaklepanje, dodatne luči, elektronski program stabilnosti (ESP), greljenje sedeža, kabina, klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, parkirni grelec, računalnik na krovu, servovolan, spojka prikolice, tempomat, zapora diferenciala, Vehicle location: en route / in transit, standard cab, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), automatic transmission, differential lock, fog lights, storage box, steel/air suspension, last axle liftable and steerable, trailer coupling (air + electrical), underride guard, side aluminum crash protection, hydraulic cross locking, roof hatch, green environmental sticker Wheelbase: 4500 mm Body: 20t roll-off system Hiab Optima 20S59 for containers up to 7m (extendable underride guard) Transmission: ZF 12 TX 2826 OD MAN TipMatic, MAN BrakeMatic, trailing axle NOL-08 steered and liftable, M-cab, emergency brake signal (ESS), auxiliary air heater EBERSPÄCHER AIRTRONIC D, MAN Attention Guard, particulate and pollen filter, KSM, ventilation for rear axle and gearbox, ABS, ASR, ESP, Emergency Brake Assist 2 (non-deactivatable), disc brakes on front and rear axles, LED daytime running lights, MAN Tronic, TollCollect pre-installation, MAN sound system, MAN Media Package Navigation Professional, Lane Guard System IV, smoker package, hill start assist, PTO at flywheel end for roll-off pump. Rodpfjyxhbtox Ah Hscb The vehicle has accident damage to the cab and will be repaired! All information subject to change as the vehicle is in transit. ACCESSORY DETAILS WITHOUT GUARANTEE. Modifications, interim sale and errors reserved!

Stanje: rabljeno, prevoženi kilometri: 851.512 km, moč: 330 kW (448,67 KM), prva registracija: 05/2016, vrsta goriva: dizel, lastna masa: 8.770 kg, največja dovoljena obremenitev: 17.230 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/70 R22,5 154G, konfiguracija osi: 6x2, gorivo: dizel, zavore: retarder, barva: zelen, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število postelj: 2, velikost sprednje pnevmatike: 315/70 R22,5 154G, velikost zadnje pnevmatike: 315/70 R22,5 154G, število sedežev: 2, največja hitrost: 90 km/h, Oprema: ABS, centralno zaklepanje, kabina, klimatska naprava, nadzor oprijema, nizka raven hrupa, parkirni grelec, računalnik na krovu, registracija tovornjaka, sistem za imobilizacijo, tempomat, zapora diferenciala, Kontaktna oseba za prodajo: Frank Rau / rusko / angleško / nemško - Bachar Ibrahim / arabsko / angleško / nemško - Registracijska storitev, tehnični pregled/SP/UVV, prevoz v pristanišče 12-stopenjski menjalnik, ekološka nalepka: 4 (zelena), samodejni menjalnik, dizel, emisijski razred: EURO6, osnovna barva: zelena, pogon na zadnji osi, klimatska naprava Dodatki v opremi ABS, adaptivni tempomat, zračna blazina, potovalni računalnik, diferencialna zapora, vozilo pripravljeno na vožnjo, spalno mesto za voznika, kabina, dovoljenje za tovornjak, nizek hrup, cena na zahtevo (Mobile), retarder/intarder, dodatno ogrevanje, tempomat, nadzor oprijema, video, imobilizator, centralno zaklepanje, vzmetenje: listno-zračno, nosilnost (kg): 17230, dodatna zavora (borza): retarder Vrsta nadgradnje: Actros 2545 2016 6x2 retarder prekucna hidravlika listno/zračno, HSN/TSN: 1313/000 Rcedpfxsy Sz Rbo Ah Hsb Pridržujemo si pravico do napak.

Stanje: rabljeno, prva registracija: 06/2001, Leto izdelave: 2001, Nooteboom MCO-48*SANH*Low loader*3x steering axles*hydraulic ramps* Very good condition!! ● ABS ● 3 x SAF air-suspended 10 t axles ● Lift/lowering system Rsdpoyuty Ejfx Ah Hecb ● Drum brakes ● 3 x steering axles with rod / cylinder steering ● Hydraulic, 2-piece loading ramps ● Hydraulic adjustment (open / close) ● Including 14 stakes for inserting into stake pockets ● NATO plug ● Loading length gooseneck: 3,230 mm ● Loading length platform: 9,270 mm ● Total loading area: 12,500 mm ● Extendable to 3 m ● Extendable warning signs ● Unladen weight: 11,080 kg ● GVW: 48,000 kg ● Payload: 36,920 kg ● Twin tires: 235/75 R17.5 ● Tire profile: 11/11 * 11/11 11/10 * 8/8 10/7 * 11/12 - TÜV / main inspection and safety inspection: !! new !! - German vehicle! Errors and prior sale excepted! = Further information = Contact Joannis Arpantzanis or Kai Bühler for further information.

Stanje: rabljeno, prevoženi kilometri: 584.934 km, moč: 368 kW (500,34 KM), prva registracija: 07/2019, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: zelen, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2019, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, * MAN TGS 26.500 * Hydro Drive 4x4 * Šasija * Servisna knjiga * Dvižna os * Krmilna os * Retarder * Klimatska naprava * Letnik: 20 * Prevoženi kilometri: 584.934 * Nekdanje mlečno zbiralno vozilo * Stanje: zelo dobro * WMA35SZZ8KM835256 * Delovni čas: pon-pet 07:30-12:00 13:00-18:00, sobota 07:30-17:00 Rcedexzwmhepfx Ah Hjb * E-pošta: * Tel/Whatsapp/Viber: Alexandar Ilic * Tel/Whatsapp/Viber angleško: Mladen Ilic