Fliegl Sds 470 T Satteltieflader Mit Rampen nakup rabljenega (59.324)

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device Isdoyxh Rzepfx Ag Ijat

Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes. Iaedpfstcwmiox Ag Ist

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902027826, lastna masa: 6.590 kg, največja dovoljena obremenitev: 28.410 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 02/2021, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 15.020 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.810 mm, skupna dolžina: 15.100 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 60 odstotek, barva: rdeča, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2021, Oprema: ABS, For sale is a FLIEGL SDS 390 X-TRA LONG Curtainsider semi-trailer. The trailer is equipped with a large and a small pallet storage box, Alcoa aluminum rims, work lights, fire extinguisher boxes, and an air pipe system for roof de-icing. The trailer is in technically and visually very good condition. The vehicle has low mileage, very good condition! Equipment: - First registration: 01.02.2021 - VIN: WFDFLT33902027826 - MOT valid until: 02/2027 - Safety Inspection: 08/2026 - 1st axle tires: 385/65R22.5, tread depth approx. 60%, suspension: air - 2nd axle tires: 385/65R22.5, tread depth approx. 60%, suspension: air - 3rd axle tires: 385/65R22.5, tread depth approx. 60%, suspension: air - Chassis galvanized and painted - Rear portal doors - Alcoa Dura Bright aluminum rims - AIR PIPE to prevent ice sheets - Work lights - Mud flaps - Pallet storage boxes - Fire extinguisher box - Load securing tarpaulin Offer subject to change without notice, input errors, changes, mistakes and prior sale reserved. Financing available on request. We are also happy to organize customs clearance for you. Opening hours: Mon.- Fri. 8am-4pm or by appointment Ijdpsyqxkhefx Ag Isat Price is NET / negotiable An invoice with VAT will be issued upon sale. Vehicle location: Im Gewerbepark 11 99441 Umpferstedt

Stanje: rabljeno, največja dovoljena obremenitev: 30.290 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.755 mm, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Schubboden +/- 92 cbm, Dvojna krilna vrata sa zadnje strane sa rotirajućim zatvaračem, pristupna i stojeća platforma napred na sanduku, klizna cerada, 'Cargo Floor' pod sa 21 daskom debljine 10 mm, potpuno pražnjenje (pomera se prednji zid), funkcija uvlačenja/izvlačenja, manometar za kontrolu utovara, preklopiva zaštita zadnjih svetala, kablovski daljinski upravljač, ABS, EBS, SAF INTRA osovine, disk kočnice, vazdušno ogibljenje sa uređajem za podizanje i spuštanje, podizna osovina, podupirači, 1x sanduk za alat, nosač rezervnog točka. Vozilo može biti sa reklamnim natpisima i/ili obeleženo nalepnicama. Ijdpfxswfvqvs Ag Ijat

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902037402, lastna masa: 6.460 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2026, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.010 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, odmik od tal: 310 mm, Leto izdelave: 2025, The images are archive photos // Vehicle may still be in use! - Patented "D-Lock" door retainer for I-Lock closure (not in conjunction with direct tarpaulin tensioner), awarded the “INTERNATIONAL TRAILER AWARD 2025” - Pallet box for 24 Euro pallets (ground clearance approx. 310 mm) Iaedpfx Asyc D H Seg Ist - "Heavy Blocker" cross rear underrun protection + side roller buffer - 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, mounted on both sides behind the axle assembly - 1 stowage box for fire extinguisher up to 6 kg, mounted on the bulkhead - 1 fire extinguisher (ABC powder, 6 kg) - 1st axle as automatic lift axle, including forced lowering and starting aid, operation "3x braking" - 3 pairs of movable sliding rings along the entire length, with 4-way stake pockets and a long pocket at the bottom - 5 rows of aluminum V-insert slats (in conjunction with drop sides: 4 rows) - 2 pairs of Vario steel slats, in conjunction with Vario beams for forward and rear load securing - Fliegl-Blitz sliding roof - Non-elastic roof, minimal deflection of roof beam during loading and unloading - Optimal rear rain gutter, fitted to the top of the end hoop above the doors - Fliegl manufacturer's certificate of body strength in accordance with EN 12642 XL - Currently fitted with customer livery; tarpaulins can be replaced, and rear branding can be covered!

Stanje: rabljeno, največja dovoljena obremenitev: 28.410 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 700 mm, FLIEGEL polpriklopnik s stranicami in 3 osmi Nosilnost: 28.410 kg TIP: SDS350 Zavora: disk Os: BPW + zračno vzmetenje 2x podporna točka (JOST) Iaodpfxjwgghns Ag Iot Dolžina: 13,60 m Širina: 2,40 m Višina: 0,70 m Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Vse navedene informacije so brez jamstva. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 10.600 kg, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Tandem trailer First registration: New vehicle Gross vehicle weight: 14,000 kg Unladen weight: 3,400 kg Payload: 10,600 kg Overall length: 8,080 mm Loading length: 6,200 mm incl. rear incline Width: 2,550 mm Loading height: 900 mm Additional information plus pre-carriage / provisioning from stock location 26639 Wiesmoor €1,280.00 / net Iajdpfx Aoy Dzk Ssg Iot - Platform width approx.: 2,480 mm - Drawbar length approx.: 1,750 mm Vehicle consists of Chassis: central axle trailer Fine-grain steel welded construction Outer frame slightly inclined, new design with "Load-Lock profile" for lashing strap anchoring 6 pairs of lashing rings outside in the floor/outer frame, each 5t 3 pairs of lashing rings outside in the floor, each 5t 1 at the front corners, 1 before and 1 in the rear incline at the back Landing leg at the front Foldable rear support Wheel chocks with holder Steel underrun protection Rear spray flaps across total width (not in combination with forklift mounting) Quarter-round mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Central axle trailer coupling gear Drawbar with certified 40 mm drawbar eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & suspension Drum brake axles, manufacturer's choice "Axles & running gear laser aligned" – reduces tyre wear and fuel consumption Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5" as per manufacturer Steel wheels in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to towing vehicle 24 volts EBS, electronic braking system with EBS plug at the front, with connection cable Notice: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connection cable Floor Steel / chequer plate floor for high point load capacity Note: Slight floor rippling possible due to welding distortion! Platform length approx. 6,200 mm Rear incline approx. 900 mm Front bulkhead / corner stanchions 25 mm aluminium hollow profile, 400 mm high Sidewalls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame and with holder for securing the loading ramps, drive-on width approx. 2,430 mm Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wooden overlay (tip area steel / chequer plate) gas pressure spring for single-person operation Operating instructions The indicated gross vehicle weight is technically feasible, but depending on cargo, the total weight may not be achievable while complying with the permissible axle, support, and fifth-wheel loads. (Poor driving and trailing behavior may occur due to improper load distribution) Special permit required if maximum train length exceeds 18,750 mm. Country-specific registration regulations must be observed. Country of registration / license plates Country of registration: Germany with Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline pre-installed for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white on sides, red at rear Paintwork Frame in DB 7350 Nova grey "10-year warran

Stanje: rabljeno, največja dovoljena obremenitev: 28.560 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 12.032 mm, širina tovornega prostora: 2.352 mm, višina nakladalnega prostora: 2.698 mm, prostornina tovornega prostora: 68 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, FLIEGL 3-axle fixed container chassis with 40 FT high-cube container First registration: 2023 Permissible total weight (technical): 38,000 kg Chassis unladen weight: 3,640 kg High-cube container unladen weight: 5,800 kg SAF axles with large 430 mm disc brakes Isdpovzk Naefx Ag Ioat 1st axle: LIFT AXLE with start-up aid with vehicle driving stability system Axle load detection Tyres: 6 x 385/55 R 22.5 40 FT high-cube container, right side wall with multiple wing doors (can be opened), door dimensions L 2,340 x W 2,585 mm Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 m³ 25 Euro pallets Accessible with pallet truck and forklift Condition: grade 1-A RENTING is the new BUYING – also available from us as a full-service rental.

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate approval technically possible Gross weight: 24,000 kg, 30,000 kg, payload approx.: 17,400 kg, 23,400 kg; unladen weight approx.: 6,600 kg +/- manufacturing tolerance. Dimensions (approx.): Total length 10,900 mm, total width 2,550 mm, gooseneck length 2,180 mm, low bed platform length incl. rear chamfer 6,500 mm, rear chamfer length 950 mm, frame width 2,520 mm, loaded loading height in low bed 860 mm, coupling height 900 mm, drawbar length 1,900 mm. Iajdpjx Nrp Nofx Ag Ijt Equipment: - Extendable width up to 3,000 mm (not in rear chamfer), incl. timber planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tyres 235/75 R17.5 - Storage box recessed at the transition to the gooseneck - 1 plastic toolbox with shelf, 620 mm wide / 360 mm high / 440 mm deep - Steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, timber-coated - Ramps with spring assist - Frame hot-dip galvanised Subject to errors and changes.

Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, vrtljiva gred, listnato vzmetenje, razširljiv do 3 m, pritrdilna ušesa, dvo-delne nakladalne rampe, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, dvojne pnevmatike, škatla za orodje. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi dvodelnimi rampami. Višina nakladanja cca 900 mm. 4x SAF osi 10t, bobnaste zavore, vlečno uho 40 in 50 mm! Dolžina zgornje ploščadi cca 2900 mm! Dolžina spodnje ploščadi cca 7100 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Iodpfoywvhrjx Ag Ijat

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2013, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 platforma z dvižno osjo, aluminijaste stranske stranice, nosilci PREVOZ JEKLA Int. št. za povpraševanja: 0326236 * ABS * EBS * 3 osi z zračno vzmetenjem Iajdpfx Agjyulw No Iet * Dvižna os * Kolutne zavore * BPW osi * Aluminijaste stranske stranice * Nosilci / stebrički Dolžina tovornega prostora: Dolžina: 13.600 mm Širina: 2.520 mm Pnevmatike: 1. os: 385 / 65 R 19,5 20 % zračno vzmetenje / dvižna os 2. os: 385 / 65 R 19,5 20 % zračno vzmetenje 3. os: 385 / 65 R 19,5 20 % zračno vzmetenje ----Cena: 9.900,- EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ???? Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 01/2014, dolžina tovornega prostora: 13.660 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.810 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65, stanje pnevmatik: 50 odstotek, medosna razdalja: 9.000 mm, barva: drugo, Leto izdelave: 2014, Oprema: ABS, = Dodatne možnosti in oprema = Isdpfx Agjyzhfqj Ijat - BPW osi - Dvižna os - Zračno vzmetenje - Kolutne zavore = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 385/65 Znamka osi: BPW Zadnja os 1: Maks. obremenitev osi: 9.000 kg; Profil pnevmatike: 50% Zadnja os 2: Maks. obremenitev osi: 9.000 kg; Profil pnevmatike: 40% Zadnja os 3: Maks. obremenitev osi: 9.000 kg; Profil pnevmatike: 40% Teže Lastna teža: 5.880 kg Nosilnost: 33.120 kg Skupna dovoljena masa: 39.000 kg Vzdrževanje Tehnični pregled: veljaven do 03.2027 Identifikacija Registrska oznaka: ON-68-FS

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, air suspension, rear axle steered, ABS (anti-lock braking system), lashing eyes, underrun protection, supports, storage box Body: 3 units available! Total length approx.: 13,800 mm Maximum total width: 2,550 mm Total height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Lowbed length approx.: 9,600 mm Loaded deck height in lowbed approx.: 900 mm Iedpfxjx Hkcis Ag Ijat Internal width approx.: 2,480 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fine-grain steel welded construction, reinforced design, fifth wheel plate with replaceable 2" kingpin, slightly inclined outer frame with "Load-Lock profile" for attaching tie-down straps, 8 additional pairs of lashing eyes recessed into the outer frame, each rated at 5 tons, 1 detachable compensating block on the lowbed deck (3-part), top timber cross member at least 200 mm wide for height compensation; gooseneck adjustable to 3 positions with parking position at the crank; 4 pairs of stake pockets 83 x 83 mm recessed into the floor for inserting the compensating block; open storage compartment for insertable stakes located below the loading area; 13 pairs of stake pockets recessed into the outer frame with 70 x 40 mm internal dimensions (3 pairs on gooseneck and 10 pairs on lowbed); 3 rows of stake pockets recessed into the floor, each with 7 stake pockets, 70 x 40 mm internal dimension, 26 plug-in stakes B=80/T=50/L=1200 mm, hot-dip galvanized; hardwood floor approx. 30 mm thick, laid lengthwise, with omega profiles for high point load capacity in the wheel recess area, steel/chequer plate floor. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.

Stanje: rabljeno, največja dovoljena obremenitev: 32.700 kg, skupna masa: 39.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2022, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Skupna teža: 39.000 kg Lastna teža: 6.300 kg Nosilnost: 32.700 kg Skupna dolžina: 13.850 mm Dolžina nakladalnega prostora: 13.650 mm Širina: 2.550 mm Višina nakladanja: ca. 1.100 mm Dodatne informacije - Notranja višina ca. 2.600 mm - Notranja dolžina ca. 13.650 mm - Notranja širina ca. 2.480 mm - Pnevmatske gume 385/65R22,5 - SAF osi - Zaščita proti podvozu Isdpoywq E Ssfx Ag Ieat - Priprava za viličarja zadaj - Zračno vzmetenje - Zadnja os krmiljena - Drsna streha "Blitz-Verdeck" - Drsni obroči - Vstavljive letvice

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2005, barva: drugo, Leto izdelave: 2005, Os 1: leva 4-8 mm desna 10-10 mm Os 2: leva 10-10 mm desna 12-12 mm Os 3: leva 4-8 mm desna 4-4 mm Možna je zlaganje prikolic! Isdpjywtcysfx Ag Ioat = Več informacij = Lastna teža: 4.200 kg

Stanje: rabljeno, največja dovoljena obremenitev: 31.620 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2016, Platforma B = 12.000 mm Nakladalna dolžina 13.500 mm, nakladalna širina 2.480 mm Nakladalna višina 1.200 mm SAF osi Zadnja os vodljiva Zračno vzmetenje Dvižna os Razširitvene table Prečne letve za nosilce Žepi za nosilce v okvirju Iodpex I U E Djfx Ag Ioat Zaklepi za kontejnerje 2x 20 in 40 čevljev

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Iasdpfx Agei Ri Rvo Iot Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Tie-down points on low loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin fail-safe connectors at the front, with connection cable, 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: 2dee9cc4124b79c4820f5c3cf, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, exterior frame slightly angled, new design with Load-Lock profile for securing lashing straps, 24t 2-speed landing gear, operation from one side, with straight lower section, without traction equalizer Note: Free support foot corner dimension or free rear swing radius approx. 1930 mm, pull-out ladder at the rear, door holders on the sides, 2 wheel chocks with holders, Side underrun protection made of aluminium, rear underrun protection made of galvanized steel, quarter shell mudguards in front of and behind the axle assembly, with EG-compliant anti-spray mudflaps, rear impact protection SAF disc brake axles with 430 mm disc diameter, axles/chassis laser aligned to reduce tyre wear and fuel consumption, air suspension 2-line compressed air brake system, color-coded pipe layout for easy servicing, spring-loaded parking brake, 2 non-interchangeable coupling heads at front, without connection line, EBS, electronic braking system with EBS socket at the front, without connecting cable, Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve, vehicle stability system 385/65 R22.5 tires, brand at manufacturer’s discretion, steel rims, factory silver 24 volt, multi-chamber lights, yellow LED side marker lights, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at front, without connection cable, Floor: phenolic plywood approx. 30 mm thick, on longitudinal cross members for high point load capacity, for forklift axle load up to max. 7100 kg Front bulkhead / front corner posts: 2, 580 mm high, steel corner posts, volume design, quick-release system for side curtain at bulkhead, crash blocker, lower interior approx. 140 mm high with steel impact protection Centre posts: 3 pairs of sliding uprights, adjustable along the full length, with 4 insert pockets and long pocket at the bottom, 3 pairs of upright positions Insert slats: 5 rows of wooden insert slats Rear wall / rear corner posts: rear corner posts steel up to lower edge of roof, curtain mounting with round tube and tensioning ratchet, rear portal doors, double-winged, each with 2 internal locking bars Tarpaulin: tarpaulin with welded horizontal and vertical belts, tension locks of stainless steel Roof: sliding roof, rear end liftable, roof can be shifted from rear to front, L crossmembers for automotive industry, interior width between roof crossmembers approx. 2,490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal sag of roof crossmember during loading and unloading, optimal rear rain gutter above the doors at end post at the top Iasdpfsi Riy Tjx Ag Iot Germany, type approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer certificate for body strength as per EN 12642 XL, prepared for single-line license plate holder, warning plate according to ECE-70, reflective tape: white, continuous along lower edge of side curtain and upper corners (if visible drop sides, tape at lower edge on sides), reflective tape: red, all around rear portal Frame DB 7350 nova grey, 10-year warranty against rust-through, support feet black coated, front corner posts hot-dip galvanized, front wall aluminium, rear corner posts hot-dip galvanized, rear wall white, tarpaulin RAL of choice, single-color, subject to availability Attention: Archive pictures!

Stanje: novo, številka stroja/vozila: 207ad28f83705ed0d38a4f174, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis Change Central-Axle Trailer Fine-grain steel welded construction Front stops, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 rear-flush (with 7.15 swap bodies not rear-flush, fork pockets/frame protrude) Telescopic support leg at front 1 pair gearbox support legs at front, with straight lower part and single-sided operation on FR right Wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Semi-shell mudguards Mounting for truck-mounted forklift at rear, including 2 fork insertion pockets, 2 extendable support tubes, holder for chain safety device with locking pin. Rear underrun protection with lighting unit, foldable. Includes 2 loose rubber buffers for rear wall protection; counterweight recommended! Note: Partial low ground clearance when fitted with forklift, potential poor trailing behavior, no warranty! (Forklift self-weight up to max. 1,500 kg for trailers). (With proximity switch for forklift control in combination with lift axle). Due to the forklift mount, axles are shifted rearwards; mind load distribution when driving without forklift—customer's risk! (For swap body trailers, driving with a forklift is only permitted in combination with a swap body). Forklift mount as per AU 203670 adapted for 7.45 m swap bodies. Counterweight at front between frames, approx. 300 kg, if required—exact assessment still pending Towing device for central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, or final check required upon order) Lower coupling drawbar Drawbar without length adjustment Axles + suspension SAF drum brake axles as per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Brake system Two-line compressed air brake system Color-coded line layout for easy servicing Spring-loaded parking brake Duomatic connection at front with line to tractor unit, located FR-left Duomatic connection at front with line to tractor unit, located FR-right EBS electronic braking system with EBS plug at front and connection cable, FR-left Iaodpfx Agji Ri Iao Ist Note: Trailer may only be towed by vehicles that ensure the effectiveness of ABS! With lift and lower valve, hold function in both raised/lowered position Vehicle stability system Wheels and tires 235/75 R17.5, brand at manufacturer’s discretion Twin arrangement steel rims, factory silver Electrics 24 volt, 4 x 3-chamber lights + 1 round reversing light and + 1 round rear fog light, side yellow LED lighting, protected installation! 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connection cable, FR-left 2 x 7-pin sockets at FR-left rear for truck-mounted forklift 1 x 15-pin socket at FR-left rear for truck-mounted forklift LED worklights to both sides behind the 2nd axle (switched via reverse gear) Extra LED worklight at rear, switched via reverse gear Approval / License Plates Germany With Dekra inspection and certificate (per §13 EU FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on sides and red rear Paint Frame in DB 7350 Novagrau 10-year warranty

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Iodpfx Agji Ri Rys Isat Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: 068983c41e44eb5660fa9100c, lastna masa: 6 kg, največja dovoljena obremenitev: 28 kg, skupna masa: 35 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 435/50 r19,5, Further Information Chassis, Fifth-Wheel, Logistics Fine-grained steel welded construction, with preload for slight neck area pretension, fifth wheel plate with replaceable 2" kingpin X-tra Long, with 15,030 mm internal length New type slightly inclined outer frame with Load-Lock profile for securing lashing straps 24 t twin-speed landing gear, operable from one side, with straight lower section, without compensating device Note: Free support foot external dimension or free rear swing radius approx. 1,930 mm Extending ladder at rear Lateral door retainers 2 wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, galvanized steel Quarter mudguards in front of the first axle and behind each axle Rear impact guard Axles + Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake System Dual-line compressed air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle working on last axle, maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS CAN-bus signal, for display in the driver’s cab, truck must be preconfigured accordingly; not installed (not a certified scale) Wheels and Tyres 435/50 R19.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side lighting Side yellow LED lighting linked with indicators, flashing Side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Floor Isdpfxoi Riwue Ag Ieat Phenolic plywood, approx. 30 mm thick, on longitudinal subframes for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Front Wall / Front Corner Raves 2 pieces, 580 mm high, steel corner raves in high-volume design, release device for side curtain at bulkhead, crash blocker, inner steel rear impact guard at approx. 140 mm height Centre Stanchions 3 pairs of sliding stanchions moveable along full length, with quadruple pocketing and long lower pocket 3 pairs of stanchion positions Insert Slats 5 rows of wooden insert slats Rear Wall / Rear Corner Raves Rear corner raves, steel up to lower roof edge, fitting for curtain with round tube and curtain tension ratchet Double-winged tail doors, each with 2 internal locking bars Curtain Curtain with welded horizontal and vertical straps Tension closures made of stainless steel Roof Sliding roof, rear end-lift foldable, canopy can be slid from rear to front, L-roof beam for automotive industry, clear internal width between roof beams approx. 2,490 mm, curtain colour: white Roof non-elastic, minimal deflection of roof beam during loading and unloading EcoLift - hydraulically liftable roof by approx. 380 mm on both sides, gas strut-assisted 3 driving positions at the front: Internal height at front approx. 2,900mm / 2,950 mm / 3,000 mm, set to approx. 3,000 mm Optimized rain gutter at rear, upper end spar, above doors Operating Instructions Special permit required if total train length exceeds 16,500 mm. When assembling the truck and trailer combinations, ens

Stanje: novo, številka stroja/vozila: f80f2330e1318ef03bc20755e, lastna masa: 3.200 kg, največja dovoljena obremenitev: 35.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information: Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, only 2 longitudinal frame members as double-T beams for subsequent attachment of a front end gantry in the latest/current version, outer frame slightly inclined with load-lock profile for tie-down strap hooks (Note: to hook-in the straps in connection with side walls, the side boards must be opened!), 24-ton, 2-speed landing gear, single-sided operation, with straight lower section, without compensating slide, wheel chocks with bracket, folding aluminium side underrun protection, extendable galvanized steel rear underrun guard, half-shell mudguards delivered loose, not installed, with anti-spray splash guards behind each axle, 1 plastic water tank, approx. 30l capacity, installed front left. BPW disc brake axles with 430 mm disc diameter, axles/chassis laser-aligned to minimize tire and fuel consumption, air suspension, 1st axle automatic lift axle, also manually lowerable, operable via manual control on the vehicle. Iasdpfji Riwqox Ag Ijt 2-line compressed air brake system with 1 standard central air tank, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting hose, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable, EBS 2S/2M, test port for brake cylinder pressure at the external EBS module. Note: This trailer may only be towed by tractors that guarantee the effectiveness of the ABS! With lift & lower valve, control unit + brakes integrated into the frame as with a tipper semi-trailer, mounted in front of the axles. Brake pad wear indicator for disc brakes via ABS/EBS lamp in the truck. 385/65 R22.5 Continental brand, steel rims, factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting as on tipper semi-trailer, 3000 mm width must be observed, 2 front white LED position lamps, supplied loose, 2 white/red lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at the front, without interconnecting cable. Germany, EC 2007/46 type approval for complete vehicle, 24/7 service hotline, prepared for double number plate holder (single line), 1 x plastic and 1 x stainless steel interchangeable holder. Warning sign according to ECE - 70, aluminium, loose, EBS, safe parking, without contour markings / reflective tape according to ECE R 048. Frame: DB 7350 Nova Grey, landing legs: Black coated Available immediately!

Stanje: novo, številka stroja/vozila: d9c951d746f03c05bc5470f89, lastna masa: 5 kg, največja dovoljena obremenitev: 29.045 kg, skupna masa: 35 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis Semi-trailer Freight Forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2-inch kingpin Vario-stake system 4 pairs recessed into the loading platform, collapsible to 2,100 mm and extendable to approx. 3,500 mm for loading. Stakes can be locked every 100 mm within an internal width of 2,100 mm up to 3,000 mm. 4 pairs of divisible stakes (600 mm + 1,200 mm), total height 1,800 mm, removable. For inner stake width from approx. 2,350 mm: oversize. Vario front walls Floor prepped to fit 3 front walls. 4 x 5 pairs of Vario stake pockets for plug-in front walls (each front and rear) and 1 x 3 pairs central for transporting reinforcing mesh 2 x 5,000 mm or 2 x 6,000 mm. 2 pieces of Vario front walls, each comprising 1 pair of plug-in stakes and 1 upper crossbeam approx. 2,200 mm wide. Crossbeams can be extended by 220 mm on both sides, with lashing holes for tensioning. Height of Vario front wall approx. 1,900 mm, convertible to height 1,300 mm or 700 mm. 4 stake pockets centrally recessed in floor for 80 x 80 mm plug-in stakes 1 pair of lower supports for Vario front wall (front) 1 pair of lower supports for Vario front wall (rear) Outer frame slightly sloped with load-lock profile for attachment of lashing straps 14 extra pairs of lashing rings set into the outer frame, each rated at 5 t Iaedpfxei Ri R Do Ag Ijt 24 t, 2-speed landing gear, single-sided operation, with straight base, no load equalizer Pull-out ladder at rear Wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Quarter shell mudguards in front of and behind axle assembly With anti-spray mud flaps only on last axle Rear impact protection bumper 8 reinforcing mesh winches with wire rope and counter hooks, 4 left and 4 right, wire guided through the external frame, 1 detachable plug-on gear for reinforcing mesh winches (supplied separately, no bracket on frame) 1 spare wheel holder for 1 E-wheel, with wheel fastening kit 1 plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (lock not included) 1 stake storage box, closed but open at the top, below loading bed, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 4 transverse lashing/stake rails recessed in the floor across the full width to the outer frame (max. usable interior width between outermost plug-in stakes approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, 60 mm distance between top and bottom (of the round steel). Bottom with angle steel edge, half open down. For lashing and plug-in stakes 80 x 80 mm. Note: Stake pockets/plug-in stakes are not designed for the sole securing of long goods, pipes, etc. without lashing Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, operated by braking 3x (Traction aid is active up to axle overload of 30% and a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake system, color-coded piping for easy service Spring-applied parking brake 2 non-interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, no connecting cable Note: The towed vehicle may only be towed by towing vehicles

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden; 3 axles, air suspension, last axle with steering function, ABS (anti-lock braking system), lashing eyes, underrun protection, landing legs, storage box. Superstructure: 2 units available! Total length approx.: 13,800 mm Overall width max.: 2,550 mm Iasdpfx Agsx I I Ape Ijt Overall height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height at low bed approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 1,150 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm High-tensile fine-grain steel welded construction, reinforced design, saddle plate with replaceable 2" king pin, slightly sloped outer frame with "Load-Lock profile" for attaching tie-down straps, 8 pairs of additional lashing eyes integrated in the outer frame, each rated at 5 tonnes, 1x insertable compensation block on the low-bed area (3-piece), wooden transverse support on top, at least 200 mm wide, for height compensation; gooseneck can be plugged in 3 positions with parking position at the cranked area; 4 pairs of stake pockets 83 x 83 mm integrated into the floor for inserting the compensation block; open compartment for insertable stakes below the loading platform; 13 pairs of stake pockets integrated into the outer frame, internal dimension 70 x 40 mm (3 pairs on the gooseneck and 10 pairs on the low-bed), 3 rows of stake pockets integrated into the floor, each with 7 pockets (internal dimension 70 x 40 mm); 26 detachable stakes, width=80 mm / depth=50 mm / length=1,200 mm, hot-dip galvanized; hardwood floor about 30 mm thick, longitudinally laid, with Omega profiles for high point load capacity in wheel arch areas; steel/checker plate floor. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to modifications, prior sale, and errors!

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2015, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 Platto, dvigljiva os, SAF osi Int. št. za povpraševanja: 1225958 * ABS * EBS * 3-osi, zračno vzmetenje * dvigljiva os * kolutne zavore * SAF osi Dolžina tovornega prostora: dolžina: 13.600 mm * širina: 2.520 mm Pnevmatike: 1. os: 385/55 R 19,5 30% zračno vzmetenje / dvigljiva os Iaedpsyavigjfx Ag Iet 2. os: 385/55 R 19,5 30% zračno vzmetenje 3. os: 385/55 R 19,5 30% zračno vzmetenje ----Cena: 3.900 EUR + 19% DDV Za dodatna vprašanja smo dosegljivi na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ????? Pridržujemo si pravico do napak v besedilu, pomot in vmesne prodaje.