Müller Traktorji (Vlečni Traktorji) nakup rabljenega (247)

Stanje: rabljeno, skupna masa: 6.500 kg, največja dovoljena obremenitev: 4.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, Leto izdelave: 1979, skupna širina: 2.500 mm, skupna višina: 3.000 mm,

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 24.020 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders Dksdpfxsl Th I Aj Ab Nou * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at rear of chassis frame * Mechanically adjustable warning sign sets front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Contour marking tape, reflective on sides and rear * Toolbox made of galvanized sheet steel (black powder-coated), approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Rotating beacon (removable) at rear * Drawbar with 50 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), doubling as lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 6 pairs of UVV-certified lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for 3 m overall width (not in the rear taper) * Widening planks stored in the center of the load area * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control valve block for retrofitting hydraulic lateral ramp shift * Load area over fifth wheel: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. coated in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 44 / 2025

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 30.000 kg, lastna masa: 6.400 kg, največja dovoljena obremenitev: 23.600 kg, prva registracija: 12/2001, naslednji pregled (TÜV): 11/2025, barva: siv, Leto izdelave: 2001, številka stroja/vozila: WMM00000010045981, Oprema: osrednja vrtljiva plošča, Top-maintained triple-axle low loader Müller Mitteltal (year of manufacture 2001) – immediately operational! Are you looking for a reliable low loader that is technically and visually up to date? Here is your perfect companion: Extensively overhauled – thoroughly refurbished in 2024 This low loader has been comprehensively renewed and serviced by a professional workshop. Here are the highlights of the work carried out: - Like new visually: Completely sandblasted and freshly repainted. - Wooden floor renewed: All planks replaced – robust and durable. - Mechanics in excellent condition: - Axles disassembled and brake pads renewed, including replacement of all wear parts. - New ABS system with control unit and solenoid valves. - All brake valves replaced, brake lines renewed from front to rear and professionally installed. - Electrical system completely overhauled: - New wiring front to rear, new connectors, modern LED lighting (front, side, and rear). - Additional protection: Underbody protection with protective wax applied to all steel parts. Dkodpfevmprqsx Ab Nou Peace of mind included: New TÜV until 11/2025! Location: 53879 Euskirchen. This low loader is immediately ready for use and awaits to support you with your projects. Price: 22,000 Euro net. Negotiable. Don’t miss out – a low loader in this condition is rare! For any questions or to arrange a viewing, we are happy to assist you.

Stanje: rabljeno, skupna masa: 18.000 kg, lastna masa: 4.420 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 12 m³, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.410 mm, višina nakladalnega prostora: 950 mm, prva registracija: 12/2008, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, medosna razdalja: 1.310 mm, barva: zelen, Oprema: ABS, Drum brake EBS (Electronic Braking System) Payload: 13,580 kg Side aluminium drop sides, swinging and foldable, with lift springs Rear steel tailgate Dsdpfx Aborz Rtmo Neku BPW axles Subject to errors and omissions

Stanje: rabljeno, konfiguracija osi: 2 osi, Leto izdelave: 2008, Tandem low-loader trailer, drive-over type. Permissible total weight 11,000 kg (currently downgraded to 9,990 kg), unladen weight 2,850 kg. Superstructure approx. 5,550 x 2,460 x 370 mm (internal dimensions) with drive-on slope, 14 lashing rings, folding side walls, loading height approx. 850 mm. Spring ramps approx. 2,700 x 600 mm. Height-adjustable drawbar, 40 mm towing eye. Height-adjustable two-speed landing gear at the front, foldable rear supports. Toolbox. 2-line air system, 24 Volts. BPW axles, parabolic suspension with compensator, twin tyres 205-65R17.5. White paint finish. Safety inspection (HU) due. Sale in existing condition. = Further details = Unladen weight: 2,850 kg Payload: 8,150 kg Dedjw A I Rpjpfx Ab Neku Gross vehicle weight (GVW): 11,000 kg Front tyres: 205-65R17.5 Rear tyres: 205-65R17.5 Country of manufacture: DE Contact Jan-Marc Schwickert for further information.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, stanje pnevmatik: 100 odstotek, Leto izdelave: 2025, The fully automatic cable trailer for tomorrow’s technology. The KWH from Müller-Mitteltal is a specialized vehicle that has proven itself over decades. Convincing technology and automated workflows make it the perfect cable transport and laying trailer. The payload is approx. 6.0 t with an 8.8 t GVW. Technical Specifications: Single-axle cable transport trailer with motor-hydraulic operation Superstructure: Swiveling cable drum mount Dkjdpfx Absvvvqfo Nju Stabilization: Geared support winch at the front, rear with extendable tubular supports, hydraulic rear stabilization optional KWH 8.8 Gross vehicle weight: 8,800 kg Payload: 6,000 kg Tongue load: 800 kg Drum diameter: 800 - 3,000 mm Clear width between drum arms: 1,700 mm Tyres: 315 / 80 R 22.5

Stanje: rabljeno, skupna masa: 18.000 kg, lastna masa: 3.450 kg, največja dovoljena obremenitev: 14.550 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, naslednji pregled (TÜV): 07/2025, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking mechanism, underrun protection, side aluminum side guard, twin tires. Body: 2-axle outer roller trailer for roll-off containers from 5.5 m to 7 m or 2x 10 m³ skip containers, BPW axles, drum brakes, pneumatic locking, pneumatic lowering drawbar. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Dkjdjwypl Nepfx Ab Nju

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.870 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: * TPMS (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 t Gigant axle system * Parabolic springs with compensation unit * Drawbar height-adjustable by approx. 300 mm * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector Dodpsl Thy Rsfx Ab Nsku * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * 50 mm softwood floor * Provisions for retrofitting 20" container locks at the front and rear * Bolted, smooth sheet metal front wall * Sidewalls made of profiled steel sheeting, foldable, with drop-side lifting springs * Bolted, hot-dip galvanized rear stakes * Perforated outer frame approx. 45 degrees edged, with 2 t lashing capacity every 480 mm * Preparation for 3 t folding lashing rings every 600 mm (five lashing rings installed on each side) * One 6.3 t lashing ring at each front and rear corner * Various holes in the front and rear crossmember for 1.2 t lashing points * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-access storage compartment integrated under the loading bed in the chassis * Sideboard color RAL 9010 pure white * Painting of the side panels in a RAL color of your choice available at extra cost * New vehicle, not registered * Errors and prior sale excepted * Available from week 48 / 2025

Stanje: rabljeno, Leto izdelave: 2020, TRACK GUIDE III 010 used Müller Elektronik Parallel Tracking and ISOBUS System 020 8" Touch Display 030 GNSS Receiver AG-200 Djdewygtwopfx Ab Njku 040 SN: 3130247701C04192 050 Camera Interface 060 Wiring/Cabling 070 Parallel Guidance System with Parallel and Contour Mode, 080 Obstacle Warning, Area Measurement, Distance Travelled, 090 Speed, 2D and 3D View 100 Unlocks: 110 ISOBUS-UT Machine Control 120 ISOBUS-TC Task Controller 130 / Job Management 140 Section Control 150 Automatic Section Control 160 TRACK Leader Parallel Steering Assistance

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna masa: 18.000 kg, lastna masa: 3.450 kg, največja dovoljena obremenitev: 14.550 kg, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 385/65 r22,5, medosna razdalja: 5.300 mm, barva: oranžna, številka stroja/vozila: 217, Oprema: ABS, Drum brake Subject to errors and omissions Dkodpfxenh Rzye Ab Nou

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna masa: 40.000 kg, lastna masa: 8.250 kg, največja dovoljena obremenitev: 31.750 kg, prva registracija: 05/1995, velikost pnevmatike: 235/75 r17,5 zwilling, Leto izdelave: 1995, številka stroja/vozila: 39500, Further information Main and outer frame made of high-strength double-T sections, grade ST 52.3, quadruple longitudinal profiling, with high-webbed front and rear cross-members as well as transverse braces; frame behind the bogie passage features a gently sloping stepped offset and rear loading bevel, 0.8 m long; lowest possible floor height achieved by recessed wheel wells above the rear wheels; leading edges of the bogie platform beveled at 45 degrees. Two recessed UVV lashing rings each on the bogie platform and loading bevel for attaching securing devices. Rear end fitted with wide supports for a ramp shaft with six-fold bearings. Lateral side protection fitted with an EC-compliant guard rail, wheel chocks with clamp lock. Low-maintenance inclined roller bearing axles with automatic linkage adjusters, two-line pneumatic braking system in accordance with EC regulations, and parking brake. Bogie and drawbar: Constructed from double-T sections in welded design with ball-bearing turntable; standard drawbar length 1,500 mm, with 8 eyelets (50 mm diameter each), drawbar support with threaded spindle as height adjustment device. Vehicle is not fitted with axle compensation! 24 volts, 2 exchange-proof 7-pin connection cables, large rectangular four-chamber lights including rear fog and reversing lights, front distribution box, rear outline marker lights, side marker reflectors, and holder for single-line license plate. Undercarriage made of 40 mm thick, pressure-impregnated pine. Low-loader platform and loading bevel with cross-laid top flooring, 30 mm thick, running lengthwise. Total floor thickness 70 mm. Bogie platform with longitudinal single-layer flooring and recessed open tool box, size L 700 x W 800 x H 180 mm. Ramps: Welded construction with trough plate, transverse braces, longitudinally laid wooden overlay, 50 mm thick; ramp tips reinforced; ramp holding rods with turnbuckle and safety catch; ramps laterally adjustable by 470 mm each, with perforated rail and sliding tube; ramp shaft made of bright steel, articulated spring lifters with external and internal springs for easy one-person operation, with automatic ground supports. Dedpfx Absi Rixgs Nsku Shot-blasted with steel granulate, zinc phosphate-primed, painted in a single acrylic RAL color of choice; wheels silver. Available in traffic, light, and metallic colors as well as two-tone paint finishes; wood surface is stained.

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * Wabco EBS (Electronic Braking System) * RDÜ Tyre Pressure Monitoring System (TPMS) * Emergency Release Device for Spring-Loaded Brake Cylinders * Drum Brakes * 2 x 7 t Gigant Axles * Parabolic Springs with Tandem Balancer Unit * Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at front * 2 rear mechanical, hot-dip galvanized folding supports * 15-pin electrical connector * LED Rear Lights * Hot-dip galvanized, bolted underrun protection * Right-sided toolbox made of galvanized sheet steel * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous upper side walls with interior pipe reinforcement (no center stanchions), foldable with drop-side spring assist * Rear tailgate foldable and swinging function via manual central locking * Bolted, hot-dip galvanized rear stanchions Dkodjl Th A Eepfx Ab Neu * In each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed into the external frame on each side * 4 mm high-tensile steel floor plate * Net hooks, rear mounting rail for drive-on ramps * Prepared for retrofitting of side wall extensions * Body reinforced with load securing certificate according to EN 12642 XL * Two-step entry on the left side for easier access * 1 pair of aluminum drive-on ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment at the rear, recessed in the chassis under the loading platform * Axles, springs, air tanks, and landing gear painted in black * Chassis, drawbar, floor, front wall, and folding stands hot-dip galvanized * New vehicle without initial registration, with manufacturer's warranty * Tyres: 385/55 R 22.5 * Side wall paintwork in RAL 9010 pure white * Optional side wall painting in any RAL color (at extra cost) * Subject to errors and prior sale * Available from calendar week 46 / 2025

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna masa: 40.000 kg, lastna masa: 8.320 kg, največja dovoljena obremenitev: 31.680 kg, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.550 mm, prva registracija: 05/2008, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, medosna razdalja: 6.500 mm, barva: modra, številka stroja/vozila: 110, Oprema: ABS, * Drum brake * 4 axles * Wheelbase 6,500 mm * Hydraulic ramp length 2,850 mm – width 650 mm * Loading edge height 920 mm Dkedpfolpav Ujx Ab Nju * Extendable to 3 m Subject to errors and omissions

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.870 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t Gigant axle assembly * Parabolic springs with compensating unit * Tow bar height adjustable by 300 mm * Jost mechanical landing gear, front * Externally mounted, hot-dip galvanized folding supports, rear Dkedpfx Abjl Tilxe Nju * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * Hot-dip galvanized chassis, tow bar, front wall, rear wall * 50 mm softwood floor * Provision for subsequent installation of 20" container lockings, front and rear * Bolted smooth sheet metal front wall * Drop sides made of trapezoidal-profiled steel sheet, folding, with drop-side lifting aid * Bolted, hot-dip galvanized rear stanchions * Perforated external frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm (5 lashing rings mounted on each side) * In each corner, front and rear, 1 x 6.3 t lashing ring * Various holes in front and end cross-members for 1.2 t lashing points * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear underfloor storage compartment integrated into the chassis * Sideboard color RAL 9010 pure white * Painting of side walls in a RAL color available at extra cost * New vehicle without registration * Subject to errors and prior sale * Available from calendar week 48 / 2025

Stanje: rabljeno, skupna masa: 24.000 kg, lastna masa: 7.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, širina tovornega prostora: 2.750 mm, prva registracija: 07/2006, naslednji pregled (TÜV): 05/2026, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, barva: siv, Oprema: ABS, Drum brake Payload 16,200 kg Rubber floor Dkodpfowh Rwvjx Ab Neu Hydraulic double ramps and hydraulic lateral shift Gigant axles Errors excepted

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * Wabco EBS (Electronic Braking System) * RDÜ (Tyre Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalisation unit * Approx. 300 mm height-adjustable hot-dip galvanised drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanised folding supports at the rear * 15-pin power connector * LED tail lights * Hot-dip galvanised bolted underrun protection * Tool box made of galvanised sheet steel, mounted on the right side * Plastic quarter mudguards * Hot-dip galvanised chassis * Steel pallet - 3-way tipper body * Continuous side walls with upper inner tube reinforcement - without central stanchions - folding down with drop-side spring-assist * Tailgate foldable and swinging, manual central locking * Hot-dip galvanised, bolted rear stanchions * Tie-down lashing points in each corner (1 x 5 t), plus 4 x 3 t lashing rings on each side recessed into the outer frame Dodev Dz N Nopfx Ab Neku * 4 mm floor plate made of fine-grain steel * Net hooks, rear mounting rail for loading ramps * Preparation for later retrofitting of drop-side extensions * Body reinforced with load-securing certificate according to EN 12642 XL * 2-step entry on the left side as step-assist * 1 pair of aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment below the loading platform integrated in the chassis, accessible from behind * Axles, springs, air tanks, and landing gear painted black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanised * New vehicle without initial registration, with manufacturer's warranty * Tyres: 385/55 R 22.5 * Sideboards finished in RAL 9010 Pure White * Painting of the side walls in desired RAL colour available at extra cost * Errors and prior sale excepted * Available from CW 46 / 2025

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * Wabco EBS (Electronic Braking System) * RDÜ (Tyre Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalising unit * Height-adjustable (approx. 300 mm) hot-dip galvanised drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanised folding supports at the rear * 15-pin electrical connector * LED tail lights * Hot-dip galvanised bolted underrun protection Dkjdpev El Tusfx Ab Neu * Side-mounted toolbox made of galvanised sheet steel on the right * Plastic quarter mudguards * Hot-dip galvanised chassis * Steel palletised three-way tipper body * Continuous side walls at the top with internal tubular reinforcement; fold-down without central stanchions, with drop side spring assist * Rear tailgate fold-down and swinging, with manual central locking * Screwed, hot-dip galvanised rear stanchions * Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the external frame each side * 4 mm fine-grained steel floor plate * Net hooks, rear channel for loading ramps * Preparation for retrofitting side wall extensions * Body reinforced with EN 12642 XL certified load securing * Two-step access on the left side as a step aid * 1 pair of aluminium loading ramps ca. 3,570 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment at the rear under the loading area, integrated into the chassis * Axles, springs, air tanks and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanised * New vehicle without first registration including manufacturer's warranty * Tyres: 385/55 R 22.5 * Sideboard painted in RAL 9010 pure white * Painting of side walls in other RAL colour available at extra charge * Errors and prior sale excepted * Delivery available from week 46 / 2025

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 24.020 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-out supports at rear chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with enclosed plastic mudguards, rear axle with straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Toolbox made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin power socket * Four stake pockets on each side (stakes not included) with integrated lashing points * Load securing package consisting of: 2 lashing points (6.4 t) at front left & right on the main frame of the turntable platform, 6 pairs of UVV compliant lashing rings – swiveling and retractable, loadable in all directions, recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outrigger extensions for 3 m total width (not at the rear chamfer) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black shade * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 44 / 2025 Dkedjl Th Nnspfx Ab Nou

Stanje: novo, skupna masa: 40.000 kg, največja dovoljena obremenitev: 31.630 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11-tonne Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tyre pressure monitoring with display option in truck via EBS signal (without truck-side installation) * Warning sign package front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin and additionally 12 V - 7+4-pin power cable * Extended connection cables for agricultural and forestry towing vehicles * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right side * Closed single plastic mudguards at the front * Straight steel mudflaps at the rear, each with spray protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Flooring over turntable platform made of 50 mm softwood and in low-loader platform made of 60 mm softwood * Outer planks of the access ramps made of 50 mm bamboo * Four stanchion pockets each side (no stanchions included), each with 2 t lashing option * Load securing package consisting of: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform, 1 pair of 13.4 t lashing rings each side front and rear on the outer frame, 4 pairs of 10 t lashing rings per side, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of 6.4 t lashing rings per side in excavator boom rest, 8 pairs of galvanized folding outriggers for 3 m total width (not on the rear slope) * Widening planks stored in a side locker on the left * Excavator boom rest over rear axle up to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (incl. 860 mm approach slope) Dedpfxorczm Ds Ab Njku * Chassis, turntable, access ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer‘s warranty * Subject to errors and prior sale * Available from week 46 / 2025

Stanje: novo, skupna masa: 40.000 kg, največja dovoljena obremenitev: 31.630 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11-tonne Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tyre pressure monitoring with display option in truck via EBS signal (without truck-side installation) * Warning sign package front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin and additionally 12 V - 7+4-pin power cable * Extended connection cables for agricultural and forestry towing vehicles * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right side * Closed single plastic mudguards at the front Dodpol Th Evsfx Ab Neku * Straight steel mudflaps at the rear, each with spray protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Flooring over turntable platform made of 50 mm softwood and in low-loader platform made of 60 mm softwood * Outer planks of the access ramps made of 50 mm bamboo * Four stanchion pockets each side (no stanchions included), each with 2 t lashing option * Load securing package consisting of: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform, 1 pair of 13.4 t lashing rings each side front and rear on the outer frame, 4 pairs of 10 t lashing rings per side, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of 6.4 t lashing rings per side in excavator boom rest, 8 pairs of galvanized folding outriggers for 3 m total width (not on the rear slope) * Widening planks stored in a side locker on the left * Excavator boom rest over rear axle up to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (incl. 860 mm approach slope) * Chassis, turntable, access ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer‘s warranty * Subject to errors and prior sale * Available from week 46 / 2025

Stanje: novo, skupna masa: 18.000 kg, največja dovoljena obremenitev: 13.650 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no installation required on the truck side) * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10.5 t axles * Air suspension with manual rear lowering * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device * Tool box made of powder-coated steel sheet, plus basket-type spare wheel holder, mounted on the right side * Reflective contour tape on sides & rear * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bump stops * Folding "A" sign at the rear * Multi-chamber tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame for container guidance Dksdpfx Abol Tld Ie Neu * Steel floor with recessed roller tracks in bogie area * Suitable for container transport with bodies from 5,500 - 7,000 mm long * Pneumatic 4-point container clamp locking system as well as mechanically insertable stops at the front of the running track * Load securing certificate according to DIN 30722-1 * Can transport up to 2 skip containers with a maximum volume of 10 m³ * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops inserted with pendulum stops * 3 pairs of 10 t UVV lashing rings on the sides for securing load with tensioning devices, 4 cloverleaf-type lashing bars per side, and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with 4 x 8 t lashing eyes each recessed into the outer frame per side * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead applied as anti-slip coating in run-up area of the ramp incline * Mechanical rear support legs * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage from the rear) * --Permissible total weight of 20,000 kg technically feasible-- * New vehicle without first registration, with manufacturer's warranty * Errors and subject to prior sale * Available from calendar week 41/2025

Stanje: novo, skupna masa: 18.000 kg, največja dovoljena obremenitev: 13.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * Lash securing package (LASI package) * Wabco * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * 2 x 12-ton Gigant axles * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device * Tool box, made of powder-coated steel sheet, mounted on right side * Reflective contour marking tape on sides and rear * Side underride protection * Plastic quarter mudguards with spray protection * Storage box for container nets, galvanized sheet approx. 960 x 300 x 400/450 mm, right side * Plastic rear impact buffer * LED rear lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide roll containers * Steel floor with recesses for rollers in the bogie area * Capable of transporting container lengths from 5,500 to 7,000 mm for roll-off containers * Pneumatic four-point clamping lock and mechanically insertable front stop angles in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops are plugged with swiveling stop * 3 pairs of 10-ton UVV lashing rings on the sides for securing skips, each side with 4 cloverleaf style lashing brackets and 1 pair of 13.4-ton UVV lashing rings to the front, load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip covering in the ramp track area * Mechanical drop-down supports on the rear * 1 pair aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) * 235/75 R 17.5 twin tires Dsdpjl Thv Rsfx Ab Neku * 4,360 kg unladen weight * Technically possible gross weight of 20,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Delivery from week 48/2025

Stanje: novo, skupna masa: 18.000 kg, največja dovoljena obremenitev: 13.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * Load securing package (LASI-Paket) * Wabco system * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * 2 x 12 t Gigant axles * Parabolic leaf springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and adjustable height coupling * Tool box made of powder-coated sheet steel, mounted on right side * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Storage box for container nets made of galvanized sheet metal approx. 960 x 300 x 400/450 mm, right side * Plastic rear collision protection buffer * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (~25 mm higher) for guidance of roll-off containers * Steel floor with recesses for rollers in the bogie area * Capable of transporting roll-off containers with a length of 5,500 – 7,000 mm * Pneumatic four-point locking system and mechanical plug-in stop blocks at the front of the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable bin stops for lateral centering of skips; front 4 bin stops plug-in with pivoting stopper * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and non-positive load securing, 4 cloverleaf-shaped lashing points on each side, and 1 pair of 13.4 t UVV lashing rings at the front; load securing certification per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp track area * Mechanical drop supports at the rear Dksdpfx Ajl Thwcsb Nju * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles; lockable storage compartment accessible from the rear * 235/75 R 17.5 twin tires * Unladen weight: 4,360 kg * Technically permissible gross weight: 20,000 kg * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from CW 48 / 2025

Stanje: novo, skupna masa: 18.000 kg, največja dovoljena obremenitev: 13.650 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Combi 18.0: * TPMS (Tire Pressure Monitoring System), display in truck via EBS signal (no truck-side installation required) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10.5 t axles * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, mounted on the right side Dsdpel Tnwzjfx Ab Njku * Side and rear contour tape, reflective * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper pads * Foldable "A" sign at the rear * Multi-chamber tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * During roll-off container transport, container lengths from 5,500–7,000 mm possible * Pneumatic 4-point clamp lock as well as mechanical plug-in stop angles at the front of the track * Load securing certificate according to DIN 30722-1 * 1 transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable skip stops for lateral centering, front 4 skip stops plug-in with pendulum stop * 3 pairs of 10 t tested lashing rings on the side for attaching tensioning elements for positive and non-positive load securing; 4 cloverleaf shaped lashing bars per side and 1 pair of 13.4 t tested lashing rings at the front * Lashing package with additional 4 x 8 t lashing points recessed per side in the outer frame * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip surface in the ramp area * Mechanical drop supports at the rear * Aluminum loading ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * -- Permissible gross weight of 20,000 kg technically possible -- * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale excepted * Available ex Egstorf from calendar week 41/2025

Stanje: novo, skupna masa: 18.000 kg, največja dovoljena obremenitev: 13.650 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no installation required on the truck side) * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10.5 t axles * Air suspension with manual rear lowering * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device * Tool box made of powder-coated steel sheet, plus basket-type spare wheel holder, mounted on the right side * Reflective contour tape on sides & rear * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bump stops * Folding "A" sign at the rear Dsdpfswb Rakox Ab Njku * Multi-chamber tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame for container guidance * Steel floor with recessed roller tracks in bogie area * Suitable for container transport with bodies from 5,500 - 7,000 mm long * Pneumatic 4-point container clamp locking system as well as mechanically insertable stops at the front of the running track * Load securing certificate according to DIN 30722-1 * Can transport up to 2 skip containers with a maximum volume of 10 m³ * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops inserted with pendulum stops * 3 pairs of 10 t UVV lashing rings on the sides for securing load with tensioning devices, 4 cloverleaf-type lashing bars per side, and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with 4 x 8 t lashing eyes each recessed into the outer frame per side * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead applied as anti-slip coating in run-up area of the ramp incline * Mechanical rear support legs * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage from the rear) * --Permissible total weight of 20,000 kg technically feasible-- * New vehicle without first registration, with manufacturer's warranty * Errors and subject to prior sale * Available from calendar week 41/2025