Tehnologija sena

Fortschritt E 303 - Schwadmäher

Stanje: rabljeno, moč: 59 kW (80,22 KM), Oprema: kabina, Maize header_____self-propelled forage harvester with a cutting unit, grass cutting unit Fortschritt E296 or pickup Fortschritt E294 (photo) or maize header Fortschritt E299, fully serviced, new batteries, new paintwork, all assemblies are ready for operation, models built up to 1990 available. Individual inquiries are welcome! Delivery possible! Location: 17094 Pragsdorf Ksdpji Iphzofx Ab Howw

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Kwsdpol Uxdkefx Ab Hew Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: rabljeno, največja dovoljena obremenitev: 42.700 kg, skupna masa: 58.600 kg, konfiguracija osi: 3 osi, prva registracija: 07/2013, Oprema: ABS, Vehicle Identification No.: YAFTL313000014136 First registration: 18.07.2013 German MOT (Hauptuntersuchung) due Curb weight: 15,900 kg Overall length: 16,700 mm Gooseneck: 3,700 mm Turning radius king pin to rear approx. 2,700 mm Standard king pin: 3.5 inch – Fifth-wheel height: 1,320 – 1,350 mm Low-bed length: 8,500 mm – Loading height: approx. 500 mm EXTENDABLE by 4,250 mm Undercarriage frame: 4,500 mm – Loading height: approx. 900 mm Suspension travel (with air suspension) approx.: -80 / +160 mm Ksdpfer Dplmox Ab Hsww Excavator well – Bucket recess Hydraulic landing legs Technically permitted fifth wheel load up to 25,000 kg Axle loads: 3 x 11,200 kg Axle spacing: 1,360 mm SAF axles with drum brakes 3 x hydraulically forced-steered axles with radio and wired remote control Tyres: 235/75 R 17.5

Stanje: novo, največja dovoljena obremenitev: 38.000 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.540 mm, skupna višina: 3.780 mm, Leto izdelave: 2025, Oprema: ABS, * Humbaur HTS 30 K * Heavy-duty semi-trailer * Low-loader * NEW * Available immediately * Fully galvanized * Robust construction * Year of manufacture: 2025 * Total dimensions: 12,630 mm x 2,540 mm x 3,780 mm * Internal dimensions: 12,000 mm x 2,540 mm * Loading height: 890 mm * Fifth wheel height: 1,230 mm * Fifth wheel platform: 3,500 mm * Lowered bed: 8,680 mm * Gross weight: 48,000 kg * Payload: 38,000 kg * Tires: 235/75R17.5 * SAF low-loader axles with lift axle and trailing steering axle * Air suspension with raising and lowering function * Twin tires * EBS braking system * 24-Volt lighting system * LED side marker lights * Wabco Smart Board * 2 inch kingpin * Chassis frame hot-dip galvanized by immersion * Heavy-duty welded chassis frame * Climbing strips on the ramp incline * 50 mm softwood floor * Recess for excavator arm storage * 3m equipment package * Steel toolbox under the loading area Kjdpfsr Ic Rwjx Ab Heww * Gooseneck with 400 mm front wall * 400 mm aluminium drop sides, foldable on the sides * Storage box with lid at the front * 3 pairs of lashing rings 6t * 3 pairs of lashing rings 3t * 5 pairs of lashing rings 10t * 6 pairs of lashing rings 3t * 6 pairs of lashing rings 2t * Ramps with rubber covering * Spare wheel with holder on front wall * LED reversing lights * Finish coating in visible areas on request * Further equipment options available upon agreement IMPORTANT! PLEASE READ CAREFULLY! We expressly reserve the right of prior sale, as this item is also offered on other platforms. We highly recommend an inspection and evaluation to avoid misunderstandings regarding condition and suitability. Inspections and evaluations are possible at any time by appointment and are expressly encouraged! The stated internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND SURCHARGE DEALS POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:00 am to 5:00 pm, Saturday 8:00 am to 2:00 pm Constantly over 500 new and used trailers in stock!!! Phone: Fax:

Stanje: novo, Leto izdelave: 2026, Metal-Fach Bale Wrapper Z529 self-loading Length: 2220 mm Width: 1420 mm Height: 2650 mm Unladen weight: 780 kg Tractor Coupling: Three-point linkage Machine drive: hydraulic Tractor power requirement: 60 kW Recommended tractor hydraulic pump flow rate: 26 l/min Recommended hydraulic pressure: 14 MPa Bale size: 1200 mm – 1500 mm Film width: 750 mm Standard features: • Three-point linkage • Film cutter • 750 mm film pre-stretcher • Manual control panel • Semi-automatic or fully automatic wrapping process Kwsdpfxehlr Sxo Ab How The Z529 bale wrapper is a machine mounted on the front or rear three-point linkage of the tractor. It is loaded from below, facilitated by special arms equipped with rotary rollers. The wrapping process is performed automatically by a wrapping arm rotating around the bale, feeding film onto the bale as it turns on the rollers. Once the wrapping cycle is completed, the film is held and cut by a hydraulically controlled cutter. After push-button confirmation, the wrapped bale is discharged onto the ground by opening the roller arms. The machine can wrap bales with diameters from 1200 mm to 1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. Wrapping a 1200 mm diameter bale takes approximately two minutes. The compact dimensions of the machine ensure easy maneuverability in the field or yard. Due to its relatively low unladen weight (780 kg), the bale wrapper can be transported and operated by a tractor with as little as 60 kW engine power. Standard equipment includes a 750 mm film feeder, a hydraulically driven film cutter, and the operator control panel. Optionally, the machine can be fitted with a hydraulic bale turner, allowing the wrapped bale to be set down on its base. ATTENTION!!!! PLEASE READ CAREFULLY!!!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend viewing and inspection to avoid any misunderstandings regarding the condition or suitability of the item. Viewing and inspection is possible at any time by appointment and is expressly encouraged!!! Images may be similar and may show optional, chargeable accessories. All listed internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, Leto izdelave: 2017, vrsta prenosa: drugo, prva registracija: 01/2017, prevoženi kilometri: 1.001 km, voznikova kabina: drugo, Vehicle location: Bovenden Configuration: Rear axle, fire damage! The vehicle had a mileage of approx. 100,000 km! Additional parts are also available for individual sale: - Manual gearbox: €5,000 - Transfer case: €4,500 - Frame: €2,000 Kjdpfx Abop R Szle Hjww Truck VIN: WMA80SZZ7HM729331 ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Stanje: rabljeno, največja dovoljena obremenitev: 37.640 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2014, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 21 m³, Oprema: ABS, * 2-cevni zračni priklop Ksdpfow Ririjx Ab Hsww * Podpora zadaj * Spredaj podporni vitel * ABS * Dvižna os * SAF osi ----Nadgradnja: Kaessebohrer LB4E EX-1 KK Lowbed nizkopodni polpriklopnik (2350 mm/labodji vrat + 9230 mm/ploščad), višina nakladanja cca 900 mm, razširljiva do 3.160 mm, izvlečna v 12 stopnjah do 19.575 mm skupne dolžine/ BMIN 12.000, BMAX 18.000 mm, 3. in 4. os samousmerljivi, naletne rampe aluminij, jeklena/lesena tla, vpenjalni obroči, twistlock. Prodaja le pravnim osebam. PRI IZVOZU JE TREBA PLAČATI SAMO NETO CENO !!!!! VSE INFORMACIJE BREZ GARANCIJE VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte Impressum).

Stanje: rabljeno, največja dovoljena obremenitev: 1.635 kg, skupna masa: 2.700 kg, konfiguracija osi: 1 os, prva registracija: 11/2002, dolžina tovornega prostora: 2.300 mm, širina tovornega prostora: 1.650 mm, višina nakladalnega prostora: 2.300 mm, skupna širina: 2.250 mm, skupna višina: 2.870 mm, Leto izdelave: 2002, Böckmann DUO with Carriage Platform Carriage Trailer 2-Horse Trailer Horse Transporter Livestock Trailer Certified for 100 km/h Poly Roof Carriage Platform Aluminium Side Walls Central Partition Wall with Longitudinally Adjustable Breast and Rear Bars Wooden Floor First Registration: 06.11.2002 Next Inspection: 09/2025 Gross Weight: 2,700 kg Empty Weight: 1,065 kg Payload: 1,635 kg Overall Dimensions: 5,730 mm x 2,250 mm x 2,870 mm Internal Dimensions: approx. 2,300 mm x 1,650 mm x 2,300 mm Side Windows Left and Right Kodpsm Ttb Iofx Ab Hsww V-Drawbar Steel Rims Roll-up Canvas Curtain Side Kick Protection Rubber Flooring in Loading Area Rubber Flooring on Loading Ramp Manual Jockey Wheel Hook for Carriage Shafts Over 30 new and used trailers in stock at all times IMPORTANT NOTICE !!!!! PLEASE READ !!!! We expressly reserve the right to prior sale, as we also advertise this item on other platforms. We strongly recommend viewing and inspection to prevent any misconceptions about the condition and suitability of the item. Viewings and inspections are possible and expressly welcome at any time by appointment!!! The internal dimensions specified are approximate. WE ACCEPT TRADE-INS FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 9:00 – 17:00, Saturday 9:00 – 14:00 Over 500 new and used trailers in stock at all times!!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, Leto izdelave: 1990, delovna širina: 550 mm, Oprema: dodatne luči, Swath guide plates_____Year of manufacture from 1989 to 1990. Engine: All machines undergo a complete inspection, new batteries, original "Fortschritt" paintwork, with E025 header, immediately available, location: 17094 Pragsdorf Kwsdpfxjqcr Hqj Ab Hsw

Stanje: rabljeno, številka stroja/vozila: 24410-72875710254, 2.5 m push blade with towing triangle for tractors, rear-mounted, location: 17094 Pragsdorf Kodpfei Ipiqjx Ab Heww