Polpriklopnik za zamenljive nadgradnje

web trailer LPRS 24 3 Achs Container- Chassis incl. Generator TranscoolWenig Benutzt

Stanje: rabljeno, lastna masa: 5.520 kg, največja dovoljena obremenitev: 37.480 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2024, naslednji pregled (TÜV): 12/2026, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5 160K, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55 R22,5 160K, velikost zadnje pnevmatike: 385/55 R22,5 160K, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 1 x 20 ft ali 2 x 20 ft ali 1 x 40 ft, centralni in zadnji nosilec, agregat Transcool ST 16, generator z močjo do 19,2 kW, motor Kubota Diesel 1703 BG, rezervoar za gorivo 160 litrov, -- napake, spremembe in drugačna interpretacija podatkov pridržane, ilustrativne slike --, več informacij na: !, več podrobnosti: ! Rjdjzvl Atepfx Aphjcf

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Maximum speed: 80 km/h (legal) Gross vehicle weight: 49,500 kg 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Turning radius king pin to rear approx.: 2,100 mm Coupling height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Load height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific legislation: Technical Description Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading platform: Rodpfoizu Ntsx Aphecf Loading platform approx. 9,600 mm in length with rear bevel approx. 900 mm x 6°. Loading area after gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps individually hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle according to technical datasheet: C470319 Maximum gradient angle with lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tools. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion Load index 143/141J (144/144F) Brake System: WABCO EBS-E brake system according to EU regulations. No connecting cable to the tractor unit included. Lighting System: 24V lighting system in "ASPÖCK-NORDIK full LED" version according to EU regulations. (ASS 3) Metallisation: Complete HRM metallisation (High Resistance Metallisation) Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). 6-Coat Paint Treatment: Entire steel structure shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Topcoat consisting of 2 layers of 2K paint (acrylic) in a single RAL shade of choice, followed by cavity sealing with special wax. Rims in silver. Multi-colour and special coatings available at extra charge. Steel Construction: High-strength fine-grain steel structure. Steel grades: S355J2+N/S355MC (min. yield strength 355MPa) S690QL/S700MC (min. yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG-welding process to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Front bulkhead made of steel, detachable, approx. 400 mm high Connector strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. Anderson socket at the front connection strip. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) Rcjdpfsiu Er Asx Aphef - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 100 h, Hoeflon Minikran C4e - predstavitvena naprava Večnamenski kompaktni žerjav Rjdei N Uynepfx Aphocf Prva registracija: 16.05.2024 Kapaciteta: 2350 kg Maks. delovno območje: 11,7 m x 144 kg Maks. višina dviga z opcijami: 15,1 m Mere D x Š x V: 2,8 m x 0,75 m x 1,82 m Mere z vitlom in izteznikom: 3,04 m x 0,75 m x 1,95 m Skupna teža: 1.900 kg, z opcijami 2.150 kg Sistem jambora: cilindrični in verižni Kot iztezanja: -5 do 83 stopinj Zasuk: 360 stopinj Pogonski sistem: daljinsko voden 1. prestava: 1,2 km/h 2. prestava: 2,4 km/h Motor: Yanmar, 3 valji, 1500 obr/min Nagibni kot: 20 stopinj Pritisk na tla: 0,59kg/cm2 Vključena dodatna oprema: Fly-Jib Vitel: 3000 kg Podaljšek nastavljiv na 30° Zložljive opore

Stanje: novo, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.360 mm, skupna širina: 2.550 mm, skupna višina: 1.800 mm, Leto izdelave: 2021, Oprema: ABS, Zamenljivo podvozje polpriklopnika za 40’, 2x 20’, 1x 30’, 1x 40’HC kontejnerje Rsdpfxekc T Ngo Aphocf * Dvižna os * Zadnji del pnevmatsko raztegljiv za 1360 mm * SAF osi z disk zavorami * Podporniki Jost * Wabco Trailer EBS-E, ABS * Haldex Colas zračni sistem * Zagozde za kolesa ----Številka vozila 6945 -----Pridržujemo si pravico do napak in vmesne prodaje Podpora prek WhatsApp na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa Whatsapp Whatsapp

Stanje: rabljeno, prevoženi kilometri: 210.000 km, moč: 816 kW (1.109,45 KM), prva registracija: 03/2023, vrsta goriva: električni, lastna masa: 12.880 kg, največja dovoljena obremenitev: 15.120 kg, skupna masa: 42.000 kg, velikost pnevmatike: 385/65 R22.5, konfiguracija osi: 6x4, medosna razdalja: 3.900 mm, naslednji pregled (TÜV): 03/2025, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: noben, vzmetenje: jeklo, skupna širina: 25.500 mm, velikost sprednje pnevmatike: 385/65 R22.5, število sedežev: 2, obratovalna teža: 28.000 kg, Oprema: klimatska naprava,

Stanje: novo, moč: 167 kW (227,06 KM), vrsta goriva: dizel, skupna masa: 11.990 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Equipment: * 12t distribution external, Day Cab, top-mounted air intake * Mechanically reinforced cab suspension * Extended Day Cab * Central locking, 3 keys, 2 remote controls * Exterior sun visor, green, light-permeable * Fog lights and cornering/turning lights * Halogen headlights * Daytime running lights * Green-tinted windows * Side and rear without glazing * 5 mirrors * Electrically adjustable mirrors * Front mirror * Mirror brackets for superstructures 2.50 - 2.60 m * Headlight beam pattern for right-hand traffic * Reversing camera * Adjustable roof spoiler * ETD white * Headlamp trims and bumper in cab color * Cab color roof spoiler Rcedpfx Apjx Hmz Ishof * Cab steps and wheel arches in cab color * Chassis color anthracite grey * Pneumatic steering column lock * Manually operated roof hatch * Driver seat: air-suspended luxury seat * Driver seat armrest * ECAS remote control * Converter 24V to 12V, 15A, 180W * Left-hand drive * Soft-grip steering wheel, black * Black seat belts * Passenger seat: fixed, velour * Engine tunnel storage compartment * Air conditioning * Electric window lifters * Digital tachograph, VDO 1C, Version G2V2 * Adaptive cruise control with FCW and AEBS-3 * Preparation for toll system * Speed limiter setting 85 km/h * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS interface, prepared * FM/DAB/DAB+ radio with loudspeakers incl. phone connectivity * Driver Performance Assistant * Lane change warning system * Electronic stability control (VSC) * Reversing warning system * Basic immobiliser * Hill start assist * DAF Side and Turn Assist * Alcohol lock preparation * Speed limit recognition * DAF Drowsiness Detection * Complies with UN Regulations R155 and R156 * Rear axle: 8.50t, air suspension, SR8.14 * Front axle: 4.50t, parabolic, 45N * Front axle 1: 4,480 kg, load index 136 * Rear axle 1: 8,480 kg, load index 134 * Silver-grey wheel trim rings * Tyre pressure monitoring system * Front axle(s): 245/70R17.5 * Driven rear axle(s): 245/70R17.5 * Steel disc wheels, silver-grey * F1, 245/70R17.5 GO KMAXS2 136/134 M Steering CCA 3P * R1, 245/70R17.5 GO KMAXD2 136/134 M Traction CCA 3P * RR, not applicable * Rear axle ratio 3.73 * Mechanical differential lock * 8-speed PowerLine 8AP1000 overdrive transmission, 4.89-0.64 * Engine PX-7, 167 kW/227 hp. Cab emblem: 230 * Emissions class Euro 6 * Traction control (ASR) * Idle shut-off automatic, 5 minutes * Automatic transmission PowerLine, 8-speed * Parking brake control with inspection position * Exhaust brake * Wheelbase 5.40 m / rear overhang 2.43 m * One wheel chock * Plastic fuel tank, 185 l * Standard component arrangement * Front underrun protection * Splash guards * AdBlue® tank 30 l, right chassis side * Fuel tank left * AdBlue® tank filler cap without lock * Temporary taillight brackets * Taillights with bulbs * Battery box left, no spare wheel mount * Longitudinal members 210/6.0 mm, without internal reinforcement * EAS unit right, exhaust right, rearward facing * Use with drawbar, nameplate, up to max. GVW * Pneumatic connection for trailer, rotating coupling * Crossmember D85-Dc70-V25, coupling D85, mounted * Trailer electrical connection + EBS, 24V/2x7-pin * Mounting for bodies BAM 1, loose consoles * Fixed connector for engine speed control, chassis * Body connector on chassis * Side marker lights * Tail lift application * Alternator 100A, batteries 2 x 175Ah * Technically permitted total mass...

Stanje: novo, Leto izdelave: 2023, Oprema: pogon na vsa štiri kolesa, Haulotte Compact 10DX - New Unit Delivery time: on request Colour: Haulotte Standard (RAL1006) Delivery to your desired address is possible. Working height: 10.28 m Platform height: 8.28 m Maximum load capacity: 565 kg Platform length: 2.45 m Platform length with extension: 3.7 m Platform extension: 1.2 m Rsdpfxemv Nats Aphocf Platform width: 1.45 m Transport height: 1.59 m Height (stowed): 2.44 m Width: 1.78 m Length: 3.17 m Wheelbase: 1.84 m Standard Features: * All-wheel drive, steerable front wheels * Drive motor lockout * Foam-filled all-terrain tyres * One-sided 1.2 m platform extension * Removable control panel on platform * 3° tilt sensor * Automatic outrigger levelling * Horn * Hour meter * 12 V 74 Ah batteries * Hydraulic brakes * Manual emergency lowering feature * Anchorage points for fall protection * Towing and crane lugs * Side guards Optional Equipment: * Non-marking tyres * Power outlet on work platform * Swing gate * Hydraulic generator 3.5 kW * Biodegradable hydraulic oil * Cold climate kit * Prepared for tracking system* * Reversing acoustic alarm * Drive warning signal * Rotating beacon * Work lights * Foldable guardrail* * Custom colours (RAL) *Factory fit only; not retrofittable on stock units. 24 months manufacturer’s warranty on labour and spare parts.