Priklopnik za platformo

Faymonville F-S43-1BGS 7.5 Meter Extandable Powersteering!

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Redpfx Afeiuy Nlemjcb Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, številka stroja/vozila: eca976917d325d4adc41b69e8, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r 22,5, Further Information Chassis Semi-Trailer Freight Forwarding High-strength fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m load length in the retracted state. 13 pairs of welded hooks for lashing strap attachment on the cross members 23 pairs of recessed lashing rings in the outer frame, each rated for 3.5 t Outer frame with load-lock profile for securing lashing straps Note! Not suitable for use with side walls! 24 t 2-speed landing gear in reinforced design for coupling/uncoupling under load, single-sided operation, with semi-circular lower part and straight mounting plate, with push compensation Wheel chocks with holder Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray flaps in accordance with EC standards 1 spare wheel holder for 1 spare tire, with wheel fastening kit 1 stake storage box sealed on the sides, open at the top, beneath the loading floor, doors on both sides, width = 450 mm / height = 400/420 mm / depth = 2460 mm 6 pairs of extendable stanchion pockets for square stanchions 80x80 mm, extendable from load width 2000 mm to 3100 mm 4 pairs of stanchion pockets recessed in the outer frame, for square stanchions 80x80 mm 11 stanchion pockets embedded centrally in the floor, for square stanchions 80x80 mm, with reinforcement carrier, positioned between the outer stanchion pockets 5 x 3 pairs of stanchion pockets recessed in the outer longitudinal beams, for square stanchions 80x80 mm, including reinforcement carriers – for front and rear load securing during reinforcing mesh transports, 2x5000 mm or 2x6000 mm 6 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with upper cable guide for strap tensioning 12 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing eyes at the bottom on both sides Note: Stanchion pockets and insert stanchions are not designed for the sole securing of long material, pipes, etc. without lashing 2 plastic toolboxes, with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) Redji Ri Szspfx Afmocb 6 reinforcing steel winches with wire rope and counter hooks, with cable passage through the outer frame, 1 detachable mounting gearbox for the rebar winches – supplied loose (without frame mount) Telescoping Main frame telescopable Extendable by max. 4,000 mm and can be locked in place approx. every 500 mm Locking with pneumatic locking pin + frame lock indicator on both sides, operation via manual button, controls for brake/lock and suspension on the front left of the chassis in front of the axles Storage compartment between longitudinal beams in extended position Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing steering, with automatic reverse lock via reversing light, and additional locking function on the vehicle via manual button, as well as manual switching in the towing vehicle (pin 10), without truck installation. Axle spacing staggered mm Air suspension 1st axle automatic lift axle, additionally electrically controllable from the truck, with traction aid, without truck installation (traction aid functional up to 30% axle overload and up to a speed of max. 25 km/h) Brake System 2-line compressed air brake system Color-coded piping for easy maintenance Spring-loaded par

Stanje: rabljeno, največja dovoljena obremenitev: 37.550 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2009, uflieger with air suspension and hydraulic dual-circuit forced steering (turntable) Dimension B 11,900 – 19,600 mm Unladen weight 10,450 kg Loading area Rcjdey Sd Enopfx Afmob - "Platform" design, single-stage telescopic - Mechanical landing legs - Front corners 90°, closed outer frame - Articulation integrated into the front of the frame - Ball bearing turntable-mounted fifth wheel plate with replaceable 2" kingpin and adjustable steering wedge - Rear crossmember as robust underrun protection Chassis - 3-axle chassis with air suspension incl. lifting and lowering valve - BPW axles Braking system - Dual-line full air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (ASA) - Parking brake via spring-loaded cylinders - ABV (ABS) Loading area LxW 13,500 x 2,480 mm extendable by +7,700 mm to 21,200 mm deck height loaded 1,380 mm at coupling height loaded 1,200 mm steering radius to the rear 2,350 mm kingpin load 18,000 kg

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2012, Faymonville SPZ-3A. Baujahr: 2012. 9-Tonnen-SAF-Achsen. Eigengewicht: 9.260 kg. Nutzlast: 35.740 kg. Max. Gesamtgewicht: 45.000 kg. Sattellast: 18.000 kg. Hydraulik funktioniert über NATO-Anschluss vom Zugfahrzeug. Verzinkt. 8 Meter ausziehbar. Servolenkung, 3 gelenkte Achsen. Luftfederung. Zwischentisch: 125 mm. Bodenmaße: Länge: 13.720 mm. Breite: 2.540 mm. Höhe: 1.500 mm. Sattelhöhe: 1.250 mm. Bereifung: 385/65R22,5, Profil 80%. Deutscher Auflieger! ID-Nr.: 568. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Inserate, Angebote und Preisvoranschläge von Heinhuis, für sämtliche Verträge, die von Heinhuis abgeschlossen werden, sowie für die diesen Verträgen vorausgehenden Verhandlungen. Durch jede Form der Reaktion erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis an und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise verstehen sich als Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 9.260 kg Zuladung: 35.740 kg zulässiges Gesamtgewicht: 45.000 kg Ausziehbare Ausführung: Ja = Firmeninformationen = Für weitere Informationen: Rsdpfxoy Dhqxs Afmecb WhatsApp: