Polpriklopnik z nizko nakladalno ploščadjo

GOLDHOFER STZ-L 6 (245) A ausziehbar gelenkt

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 Dwedpfsrgzv Njx Afqeb * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel Dodpfxek Af Svs Afqjwb - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: rabljeno, moč: 74,5 kW (101,29 KM), vrsta goriva: dizel, barva: rdeča, dvižna moč: 4 kg/m, dvižna višina: 14.000 mm, velikost pnevmatike: 15.5 / 80 - 24, stanje pnevmatik: 98 odstotek, tip droga: teleskopski, Leto izdelave: 2007, obratovalne ure: 1.048 h, Oprema: kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1440 SLT ULTRA TURBO Series III-E2 - 4x4x4, first delivered: 2008, LIFTING CAPACITY: 4,000 kg, LIFTING HEIGHT: 14.00 m, LONG FORKS – QUICK COUPLER, AUXILIARY HYDRAULICS, LOAD PROTECTION GUARD, 4-cylinder PERKINS TURBO diesel engine (101.32 hp / 74.50 kW at 2,200 rpm), RADIO REMOTE CONTROL, FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic outriggers (2x / WIDE DESIGN), SIDE SHIFT - LEVELLING, OVERLOAD PROTECTION DEVICE, spacious cab (coloured glass), comfort seat, ROPS / FOPS, road lighting, WORK LIGHTS (front/rear), WARNING BEACON, exterior mirrors (2x), windscreen wipers (2x), heating / ventilation, trailer coupling, lashing and transport points. Tyres: BKT OFF-ROAD TYRES (15.5/80 – 24) – approx. 98% all round. Transport dimensions: Length: approx. 7,290 mm (approx. 5,930 mm without forks), width: approx. 2,440 mm, height: approx. 2,560 mm. Price is net export; for domestic sales, VAT applies. Financing possible / low-cost worldwide transport / for export sales, only the net price is payable. Djdouiyqdjpfx Afqewb

Stanje: novo, največja dovoljena obremenitev: 65.400 kg, skupna masa: 93.400 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Pos. 1: Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data apply only when using a 4-axle tractor unit with the following data: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights at speed 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Gross vehicle weight rating: 94,000 kg Curb weight: approx. 29,600 kg Payload: approx. 64,400 kg (depending on load diagram / easyLOAD calculation) Dimensions Dwsdpfewg N N Ijx Afqob Dimension b: 18,765 mm Overall length of combination: 24,165 mm Vehicle width: — Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Articulation radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front bogie Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: counter-steered Flatbed 14,400 mm (external beams), single telescopic with separating point Length x width: 7,000 mm x 2,750 mm Telescopic extension by / to max. 3,400 mm / 10,400 mm Deck height: 300 mm Plus 4,000 mm extension beam included Loaded loading height: approx. 450 mm 4-axle rear bogie Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 16.300 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2018, vzmetenje: drugo, velikost pnevmatike: 205/65 R 17,5, barva: zelen, Oprema: ABS, EBS (Elektronski zavorni sistem), - 5 osi: 1. os vodena s trenjem in dvižna; 2.-5. os hidravlično vodene - Raztegljivo: 6.200 mm (skupna dolžina: 12.800 mm - 19.000 mm) - SAF osi - Premične hidravlične dvojne rampe z nosilnimi nogami Dsdjymnmwepfx Afqowb - Dvižni in spustni sistem - Bobnaste zavore - Vzmetenje: zračno-lift Pridržujemo si pravico do napak

Stanje: novo, največja dovoljena obremenitev: 44.000 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Dwsdpfx Asv D Abtsfqob

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, gorivo: dizel, zavore: retarder, barva: temno rdeča, vrsta prenosa: samodejen, Oprema: ABS, Bluetooth, airbag, računalnik na krovu, SCANIA 770 S V8 FULL AIR SUSPENSION Dedpfx Asy Ny Tcsfqjwb *READY FOR IMMEDIATE DELIVERY – TO BE REGISTERED 1 YEAR MANUFACTURER WARRANTY EPC -Km 0 -Leather/alcantara interior -Full pneumatic system -Retarder -Parking air conditioning -LED headlights -Navigation system -Digital dashboard -Refrigerator -Alloy wheels CUSTOMIZED FINANCING AND LEASING SOLUTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OUR LOCATIONS SALERNO | Località Pezzagrande, Area P.I.P. - 84025 Eboli (SA) Tel. 0828 436141 - Cell. 335 671 3062 NAPLES | Via del Cassano, 457 - 80144 Naples (NA) Tel. 081 0152901 - Cell. 335 671 3062 CASERTA | S.S. 87 Sannitica KM 19.900, 81025 Marcianise (CE) Tel. 0823 1686306 - Cell. 335 671 3062 PIACENZA | Via Piemonte, 11, 29122 Piacenza (PC) Tel. 0823 1686306 - Cell. 328 217 7326 OPENING HOURS: MONDAY-FRIDAY 8:30/18:30 – SATURDAY 08:30/13:30 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Reefer tipping-trailer – Lamberet – Schmitz – Isuzu – Fixed body – Crane – Tipper – 4 axles – 4 Rear Axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Trilateral – V8 – Scania – Frost Edition Curtain-Sider – Box truck – Tail lift – Refrigerated cell – Insulated box with fridge – Van Domenico Truck srl declines any responsibility for any discrepancies in technical specifications, equipment, and features which may, in some cases, differ from those stated in the description. We invite you to verify the specifications of the specific vehicle.

Stanje: zelo dobro (rabljeno), prva registracija: 08/2008, barva: zelen, Leto izdelave: 2008, Izvlečna nadgradnja: da Tehnično stanje: zelo dobro Dedpfxjykz Uij Afqswb Optično stanje: zelo dobro

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 7.500 km, moč: 390 kW (530,25 KM), prva registracija: 12/2023, vrsta goriva: dizel, konfiguracija osi: 6x4, barva: bela, voznikova kabina: spalna kabina, Oprema: ABS, AdBlue, airbag, dodatne luči, hidravlika, parkirni grelec, pogon na vsa štiri kolesa, računalnik na krovu, zapora diferenciala, Vlačilec s polpriklopnikom (ne prodajam ločeno) za izredne prevoze. Polpriklopnik s 3 krmilnimi osmi – podaljšljiv keson za izredne prevoze. Popolnoma nov. Dodpfx Afsxrcwgsqswb

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 11.200 kg, dovoljena osna obremenitev (os 2): 11.200 kg, dovoljena osna obremenitev (os 3): 11.200 kg, dolžina tovornega prostora: 14.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 880 mm, skupna dolžina: 14.600 mm, skupna širina: 2.550 mm, skupna višina: 880 mm, vzmetenje: zrak, velikost pnevmatike: 245 / 70 R17.5, barva: modra, Leto izdelave: 2008, Oprema: dvižna zadnja plošča, Color: Blue Loading capacity: 72,600 kg Loading floor height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Model: STZ L6 65/80A Semi Low Loader with Ramps Dwedpfxox R Unde Afqeb Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights / Loading Capacity King pin load: 26,000 kg Axle load: 11,200 kg Total axle load: 6 x 11,200 kg = 67,200 kg Gross vehicle weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload: 72,600 kg Axles Axle make: BPW Air suspension 1st axle fixed Axles 2–6 hydraulic steering Axles 1 & 2 liftable High/low valve WABCO braking system Tyres: 245/70 R17.5 Dimensions Length: 14,600 mm Extensions: +7,200 mm Maximum extended length: 21,800 mm Loading width: 2,550 mm Height: approx. 885 mm – 925 mm King pin height: +/- 1,350 mm Additional information • Operated via truck PTO • Lashing rings • Stake pockets • Partially wooden loading deck • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • 3.5" king pin • Central lubrication • Oversize load marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = Further information = General information Year of manufacture: 2008 Axle configuration Tyre size: 245/70 R17.5 Axle brand: BPW Eco Suspension: Air suspension Rear axle 1: twin tyres, lift axle, max. axle load 11,200 kg Rear axle 2: twin tyres, lift axle, max. axle load 11,200 kg, steered Rear axle 3: twin tyres, max. axle load 11,200 kg, steered Rear axle 4: twin tyres, max. axle load 11,200 kg, steered Rear axle 5: twin tyres, max. axle load 11,200 kg, steered Rear axle 6: twin tyres, max. axle load 11,200 kg, steered Weights Unladen weight: 20,600 kg Payload: 72,600 kg GVW: 93,200 kg Functional Superstructure make: WABCO Loading platform height: 88 cm Extendable superstructure: Yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request