Polpriklopnik z nizko nakladalno ploščadjo

SCHEUERLE EuroCompact FL02 2fach Tele 17 m im Bett

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm Kjdpfehlz R Sox Ab Ujnf - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 03/2015, dolžina tovornega prostora: 134.450 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 480 mm, vzmetenje: hidravlika, Leto izdelave: 2015, Oprema: ABS, = Dodatne možnosti in oprema = - Centralno mazanje = Dodatne informacije = Konfiguracija osi Vzmetenje: hidravlično vzmetenje Zadnja os 1: Največja osna obremenitev: 12.000 kg; Krmiljena Zadnja os 2: Največja osna obremenitev: 12.000 kg; Krmiljena Teže Lastna teža: 12.660 kg Nosilnost: 34.340 kg Knjdpjvtc Aisfx Ab Usf Skupna dovoljena masa: 47.000 kg Funkcionalnost Višina nakladalne površine: 48 cm Raztegljiva nadgradnja: Da Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro Finančne informacije Cena: Po dogovoru Dodatne informacije Za več informacij kontaktirajte Davida F. Middelmana ali Davida F. Middelmana.

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Extract from the specification. Complete specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection rail with sockets * 3 kW electro-hydraulic power unit for hydraulic operations (except hydraulic winches) * External beams of the gooseneck with mounting holes for screwable lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood covering over the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on front connection rail (Maeler & Kaege VG 96 917) * 1 pair of stake pockets recessed in the gooseneck for insertable stakes approx. 100 x 50 mm (inside the chassis beam) Loading Platform * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° Kedpfxoxc Axrs Ab Usnf * Recess in the loading platform and in the chamfer for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous 50 mm thick hardwood covering on the loading platform (interrupted between axles) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded locking profiles every approx. 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame (LC 10,000 daN) * 1 pair of permanently integrated wheel recesses in front of the axles, open up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * 1 pair of permanently integrated wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), located between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, usable as widening planks * Hardwood covering on the loading platform chamfer * Painted sand coating on the outer frame and chequer plates of the loading platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve * 1st axle with traction aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyres * TPMS tyre pressure monitoring system compliant with ECE R 141 Paintwork * 1 LED work light mounted left and right ahead of axles, wired to the tractor unit Loading Ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M. Pair of two-part steel ramps, approx. 4,350 mm length, 900 mm width * Hardwood covering * Hydraulically foldable ramp tips * Ramps individually hydraulically adjustable approx. 235 mm outward and 215 mm inward * Hardwood covering on platform chamfer * Ramp with hardwood covering Brake System WABCO EBS-E according to EU regulations Lighting System * 24-volt lighting system * ASPÖCK-NORDIK full L

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, skupna dolžina: 16.470 mm, skupna širina: 2.750 mm, skupna višina: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2003, Color: Grey Payload: 32,540 kg Details: Manufacturer: Goldhofer Type: STZ-L4-33/80 Chassis number: WG0STZL4530027413 Year: 2003 Weights: King pin load: 17,500 kg Axle load: 10,000 kg Total axle load: 40,000 kg Gross Vehicle Weight (GVW): 57,500 kg Empty weight: 24,960 kg Payload: 32,540 kg Knsdpfx Asuu Hdveb Ujf Axles: Axle make: Gigant Air suspension All axles with hydraulic steering High/low valve ABS Tyres: 235/75 R17.5, twin mounted Load index: 143/141J Dimensions: Length: 16,470 mm Extensions: 8,740 mm + 8,635 mm + 8,535 mm Max. extended length: 42,380 mm Loading floor width: 2,750 mm Loading floor height: 1,025 mm (+100 / –165 mm) King pin height: +/- 1,250 mm Additional equipment: NATO plug Lashing rings Stake pockets Hydraulically operated gooseneck Wooden loading floor Mechanical landing gear Toolbox Electro-hydraulic pump for trailer functions Spare wheel holder 3.5” king pin Central lubrication system with 2 pumps Radio remote control = Further information = General information Year of manufacture: 2003 Axle configuration Tyre size: 235/75 R17.5 Axle brand: Gigant Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; max. axle load: 10,000 kg; steered Rear axle 2: Twin tyres; max. axle load: 10,000 kg; steered Rear axle 3: Twin tyres; max. axle load: 10,000 kg; steered Rear axle 4: Twin tyres; max. axle load: 10,000 kg; steered Weights Unladen weight: 24,960 kg Payload: 32,540 kg Gross vehicle weight: 57,500 kg Functional Loading floor height: 102 cm Extendable chassis: Yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request Further information For more details, please contact Stefan Schaapveld.

Stanje: rabljeno, največja dovoljena obremenitev: 33.980 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2022, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, skupna širina: 2.540 mm, skupna višina: 2.300 mm, Leto izdelave: 2022, Oprema: ABS, Lowbed with externally mounted beams, extendable SUPER LOW design, length approx. 6,850 mm * Total length extendable from 13,500 to 19,000 mm * Loading platform width adjustable from 2,540 to 3,000 mm * Lowbed with fixed hardwood floor (approx. 40 mm thick) and mechanically operated locking mechanism * All supply lines are protected within the extendable beams and automatically adjust to the current length of the lowbed * 5 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting bolt-on RUD rings Rear running gear * Rear running gear with closed external frame, checker plate surface, and continuous prism-shaped excavator trough, approx. 1,250/700 x 505 mm, open at the rear * 2 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings fitted flat in the trough (LC 8,000 daN + 5,300 daN) * 2 pairs of stake pockets for insertable stakes, approx. 100 x 50 mm, in the outer frame Gooseneck Kedpfxswla Rtj Ab Uenf * Gooseneck in SNT design to optimize loading length, approx. 3,785 mm long * Gooseneck hydraulically liftable/lowerable and detachable * Technical king pin load: 23,000 kg * For tractor units: 4x2, 6x2, and 6x4 PENDLE AXLE * All axles hydro-mechanically forced steered * Hose rupture valve on axle balance cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and locking pins to secure in raised position * Technical axle load: 12,000 kg per axle * Hydraulic axle compensation * Axle tools * Tyres: 245/70 R 17.5 3PMSF, load index (146/146F), new spare wheel Brake system * Brake system according to EU regulations with EBS-E (2S2M), including connector lines to tractor unit Electrical system * Remote for axle steering * Electrical system according to EU regulations * Lighting: 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connector bracket with 24N, 24S & 15-pin sockets as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction * Construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC Paintwork * First-class, long-lasting corrosion protection * High quality 2-component (2K) top coat, single color * 2" king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized front connector bar * 4 wheel chocks with holders * Electro-hydraulic power unit * Yellow reflector tape in compliance with EU regulations on sides, extension, and rear of the trailer * Mount for warning beacon at the rear of the trailer incl. beacon * European (red-yellow) reflector signs at the rear * Mounts for warning boards left/right on gooseneck and rear panel incl. power socket * Operating manual and documentation * 80 km/h speed stickers on rear and both sides * Load gauge for axle load determination, incl. load chart * Subject to error, modification and prior sale

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.550 mm, skupna dolžina: 13.600 mm, skupna širina: 2.540 mm, skupna višina: 1.550 mm, vzmetenje: zrak, velikost pnevmatike: 275 / 70 R22.5 – Good Year, barva: rdeča, Leto izdelave: 2024, Color: Red Loading capacity: 60,800 kg Extendable Main Features Manufacturer: Faymonville Model: F-S44-1BBY Triple Extendable Flat Bed Chassis number: YAFSR4009S0036724 Year: NEW / Unused Weights/Loading Capacity Fifth-wheel load: 28,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg GVW (Gross Vehicle Weight): 76,000 kg Unladen weight: 15,200 kg Payload: 60,800 kg Axles Axle manufacturer: BPW Air suspension Hydraulic steering on all axles WABCO brake system with EBS Tyres: 275/70 R22.5 – Goodyear Load index: 148/145M Dimensions Length: 13,600 mm Extensions: 7,200mm + 7,400mm + 7,600mm Maximum extended length: 35,800 mm Loading floor width: 2,540 mm Height: 1,550 mm (+/- 100 mm) Additional Information High-resistance metallized steel construction NATO plug Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Electro-hydraulic pump for trailer functions Spare wheel Rear bumper with lighting King-pin 2.0” + 3.5” Central greasing system with 2 BEKAMAX pumps = More Information = Knedpov I Dqqjfx Ab Ujf General Information Year of manufacture: 2024 Axle Configuration Tyre size: 275/70 R22.5 – Goodyear Axle brand: BPW Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Weights Unladen weight: 15,200 kg Payload: 60,800 kg Gross vehicle weight: 76,000 kg Functional Loading floor height: 155 cm Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good Further information Please contact Stefan Schaapveld for more information.

Stanje: rabljeno, največja dovoljena obremenitev: 34.500 kg, skupna masa: 50.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2025, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 12.200 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, skupna širina: 2.550 mm, skupna višina: 320 mm, Leto izdelave: 2025, Oprema: ABS, 2-axle low-loader/low-bed trailer with full equipment First registration 05/2025, new vehicle Kedjw A Ekmjpfx Ab Ujnf Total length: 13,065 to 17,565 mm (single telescopic extension 4,500 mm, extendable in 500 mm increments) Fifth wheel height: 1,200 mm Low-bed length (standard): 6,650 mm Low-bed length (extended): 11,150 mm Gooseneck length: 3,650 mm Rear bogie length: 2,765 mm Loading height on rear bogie: only 845 mm LOW-BED LOADING HEIGHT: approx. 300 mm (loaded) Gross technical weight: 50,000 kg Technical fifth wheel load: up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis: 3-coat paint Detachable gooseneck with external main frame Central lubrication system for front chassis and an additional for rear bogie All axles with hydraulic forced steering GIGANT axles with drum brakes WABCO trailer EBS with RSS anti-skid control WABCO Smartboard PENDULUM AXLES with hydraulic suspension, 600 mm lift RADIO REMOTE CONTROL Tyres: 9x 245/70 R 17.5 Continental 24-Volt electric hydraulic system OVERSIZED LOAD PACKAGE 10 pairs of foldable loading platform extensions, each 225 mm 3 pairs of CONTAINER locking adapters, for 40 ft or 20 ft container accommodation Removable side wall superstructure on the fifth wheel platform Loading ramps for the low-bed platform 5 pairs of swivelling lashing rings, 10,000 daN lashing capacity in the low-bed 4 pairs of stake pockets in the outer frame 3 pairs of swivelling lashing eyes on the rear bogie 1 pair of lashing eyes on the rear underrun bar, LC 6,000 daN RENTING IS THE NEW BUYING – immediately available for rent or full-service leasing

Stanje: rabljeno, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2025, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 12.900 kg, Oprema: ABS, You will receive a current and complete inspection and functionality report with each used semi-trailer. Neck: - SNT-designed gooseneck to optimize loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical kingpin load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Kedpfx Abjwp Dx Aj Uonf Loading Platform: - Lowbed with external beams in extendable "SUPER LOW" design, approx. 6,850 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking - 5 pairs of lashing rings foldable outwards (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Rear Chassis: - Rear chassis with a closed outer frame, checker plate covering, and continuous prismatic excavator recess approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards (LC 10,000 daN) - 1 pair of horizontal lashing rings in the recess (LC 8,000 daN + 5,300 daN) - 2 pairs of stake pockets for removable stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - "PENDULUM AXLE" – all axles hydromechanically forced-steered - Burst pipe valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and safety locks for securing in the lifted position - Axles finished with 2 coats of single-color 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle levelling - 245/70 R 17.5 tires - TPMS tire pressure monitoring system as per ECE R 141 Accessories: - Preparation for mounting bolt-on container locking devices for one 20ft or one 40ft container on the outer beams - 2" king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel - Yellow-red air couplings on the galvanized front connection bar - Four wheel chocks - Radio and cable remote control - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape complying with EU regulations - Two wooden blocks 500 x 250 x 200 mm - European reflector boards (red-yellow) on the rear of the trailer - Gooseneck and rear panel with left and right brackets for warning signs including socket - 6 pairs of threaded blocks between the lashing rings under the upper flange on the outer beam for installing boltable RUD VLBG-4 rings - Separate air connection with air gun on gooseneck - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,560 mm) - 2 pairs of screw-on M20 lashing rings (LC 5,000 daN) - Gooseneck closed at the rear upper section with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Foldable extensions of approx. 230 mm per side - 2 pairs of boltable RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps to bridge the catches of the lowbed - Loading platform has a sand-coated surface as anti-slip protection - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm - Central grease system with 2 pumps - Load manometer for determining axle loads including load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (zinc 85% – aluminium 15%)

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve Kjdpfx Abswvzg Rs Ujnf * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 06/2022, dolžina tovornega prostora: 11.060 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.500 mm, skupna dolžina: 113.500 mm, skupna širina: 2.480 mm, skupna višina: 1.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, barva: rdeča, Leto izdelave: 2022, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje - Centralno mazanje = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 385/65/22.5 Znamka osi: SAF Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Največja nosilnost na os: 10.000 kg Zadnja os 2: Največja nosilnost na os: 10.000 kg; krmiljena Zadnja os 3: Največja nosilnost na os: 10.000 kg; krmiljena Teže Lastna teža: 8.370 kg Dovoljena nosilnost: 39.630 kg Skupna dovoljena masa: 48.000 kg Funkcionalno Višina nakladalne površine: 150 cm Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro NOOTEBOOM OVB-48-03 3-OSNA NIZKA POLPRIKOLICA ZRAČNO VZMETENJE SAF OSI 2. IN 3. OS Z DODATNIM ELEKTROHIDRAVLIČNIM KRMLJENJEM Knodpfov I R N Tox Ab Uef DALJINSKO UPRAVLJANJE CENTRALNO MAZANJE D=1106 cm, Š=250 cm 34 X PRITRDILNA MESTA V TLEH 20 X STRANSKI KOLIČKI