Priklopnik sedeža z delovno ploščadjo

ES-GE 5-Achs-Ballastauflieger

You can find our complete vehicle stock, including immediately and soon-to-be available vehicles, on our website.

Excerpt from the equipment features. Full equipment details available upon request.

Chassis:
* Welded construction made from high-quality steel profiles with punched cross members, designed for high point load capacity
* Outer frame: UNP steel

Towing device:
* 2-inch king pin

Underrun protection:
* In accordance with EC regulations, bolted design

Side impact protection:
* In accordance with EC regulations

Landing legs:
* Landing legs with single-side operation, support load approx. 66 t/lifting capacity approx. 24 t

Axles:
* 5 x 10 t air suspension axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm
* ABS
* Centrally located 10-hole wheel connection with offset ET 0
* Total air suspension lift approx. 200 mm, raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with lock function

Steering:
* 1 axle self-steering at the front, 2nd axle fixed, 3rd, 4th, and 5th axle forced steered via linkage
* Centralized lubrication points positioned externally

Axle lift:
* First and second axles can be raised automatically, with additional deactivation on the chassis

Codpfewx Dcajx Agfera
Brake system:
* Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, Wabco 4S/3M brand
* Spring chamber cylinders as parking brake, anti-mistake coupling heads permanently mounted to the front panel, without connection line to the tractor unit
* Aluminium air reservoirs

Tyres:
* 10 x 445/65 R22.5 164J on 11.75 x 22.5 ET 0 rims – Manufacturer of our choice

TPMS:
* Tyre Pressure Monitoring System (TPMS) according to ECE R141, with data transmission to the tractor unit

Mudguards:
* In accordance with EC, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with a 1/4 PVC mudguard
* Rear mudguards with spray flaps

Load securing:
* 5 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 14 t)
* 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t)
* 10 pairs of side lashing rings welded into outer frame, evenly distributed (lashing capacity approx. 8 t)

Stake pockets:
* 10 pairs of stake pockets recessed into the outer frame
* 6 pairs of stake pockets recessed into the floor (on the outer longitudinal frame)

Insertable stakes:
* 16 galvanized insertable stakes, approx. 80 x 80 x 8 mm, approx. 850 mm usable length
Stake magazine:
* One magazine for 8 insertable stakes (approx. 80/80 mm) on each side in front of the front wall

Front wall:
* Bolted corner posts, filled with aluminium hollow profiles, internally with a steel impact plate over full width and height

Floor:
* Approx. 28 mm Z-hardwood floor recessed into the outer frame, flush-mounted

Lighting system:
* According to EC, 24 Volt with multi-chamber lights
* LED side marker lights
* LED position lights white at the front
* LED outline lights rear
* Number plate lights 1x15 and 2x7-pin connector at the front panel

Equipment:
* Two wheel chocks with holder
* Warning panel as per ECE 70
* Work spotlight on light carrier (activated by reverse gear)
* Holder for rotating beacon at the rear (including beacon)
* Fixed access ladder on both left and right, including plug-in step
* Smart Board
* Sticker: "Vehicle swings out" and load center of gravity indication

Paintwork:
* Chassis and front wall blast-cleaned and high-quality top-coated
* Chas

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.