Nizki nakladalnik

Faymonville STBZ-6VA NACZEPA NISKOPODWOZIOWA + WÓZEK

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck Kodpfx Aboi Ai E Rj Ujfa - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit Kfodpok Af Svofx Ab Uea - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WGOTHPE4560028329, skupna masa: 102.000 kg, vzmetenje: hidravlika, barva: rumena, Leto izdelave: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Deck / Low Loader Location: D - 73230 Kirchheim unter Teck Technical specifications according to original TÜV certificate: - Maximum speed: 80 km/h - Fifth-wheel load: 30,000 kg - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg - Gross trailer weight: 102,000 kg (with 30,000 kg fifth-wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination comprising: GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg - Maximum fifth-wheel load: 30,000 kg - Kingpin: 3.5" - Designed for direct installation of the excavator deck or connection of the 2-axle bogie - Central lubrication: Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle line load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Bogie width: 2,750 mm - Loaded deck height: approx. 1,240 mm (+/- 300 mm) - Central lubrication: Beka-Max EXCAVATOR DECK / LOW LOADER DECK - Payload: 67.75 t - Extendable: 6,000 – 14,000 mm - Main tube fixed to the rear 4-axle bogie Kedpfx Aewzl Nmsb Uefa - Claw coupling at the front - Main tube width: 1,350 mm - Inner tube width: 600 mm - Construction height: 440 mm - Loaded deck height: 650 mm (ground clearance 210 mm) - Width adjustable from 2,750 mm to 3,250 mm - Sliding tables (weight 405 kg) - Folding extension boards (weight 1,955 kg) 4-AXLE BOGIE - Type XLE - Weight: 16,110 kg incl. excavator deck - Axle line load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Bogie width: 2,750 mm - Excavator arm recess: 700 mm - Loaded deck height: approx. 1,140 mm (+400/-200 mm) - Central lubrication: Beka-Max Good condition – German vehicle from first owner – available at short notice ex stock Kirchheim unter Teck – further information on request.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 17.840 mm, širina tovornega prostora: 1.750 mm, velikost pnevmatike: 9.50R17,5, medosna razdalja: 1.350 mm, barva: modra, Leto izdelave: 1992, Color: Blue Payload Capacity: 43,600 kg Extendable Manufacturer: Goldhofer Model: STZ-VL4-44-80 Extendable Low Loader Chassis Number: WG0STZV47N0020238 Year of Manufacture: 1992 Weights: King Pin Load: 24,000 kg Axle Load (per axle): 10,000 kg Total Axle Load: 40,000 kg Gross Vehicle Weight (GVW): 64,000 kg Unladen Weight: 20,400 kg Payload Capacity: 43,600 kg Axles: Axle Brand: BPW Air Suspension All Axles Hydraulic Steering High-Low Valve ABS Brake System Tyres: 9.50R17.5, twin mounting Load Index: 143/141 J Dimensions: Length: 17,840 mm Extensions: 4,000 mm Maximum Extended Length: 21,840 mm Loading Floor Length: 8,000 mm - 12,000 mm Loading Floor Width: 2,750 mm Height: 600 (+/-100) mm King Pin Height: 1,300 mm Additional Equipment: Hydraulic truck connection for hydraulic functions Lashing rings 2x Spare wheels Detachable gooseneck Hydraulically operated gooseneck Work lamps Rear underrun bumper with lights King Pin 3.5” Schübler central lubrication system Outriggers for widening the loading floor Fixed ramps on loading floor High-Low Valve = Further Information = General Information Year of Manufacture: 1992 Axle Configuration Tyre Size: 9.50R17.5 Axle Brand: BPW Rear Axle 1: Twin-mounted; Max axle load: 10,000 kg; Steered Rear Axle 2: Twin-mounted; Max axle load: 10,000 kg; Steered Rear Axle 3: Twin-mounted; Max axle load: 10,000 kg; Steered Rear Axle 4: Twin-mounted; Max axle load: 10,000 kg; Steered Weights Unladen Weight: 20,400 kg Payload: 43,600 kg Gross Vehicle Weight: 64,000 kg Features Extendable Chassis: Yes Condition Technical Condition: Very good Visual Condition: Very good Damage: None Financial Information Price: On request Kedpfxouu Hbhs Ab Usfa Further Information Please contact Stefan Schaapveld for more details.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area Ksdpfxsrgzv Nj Ab Usfa * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: rabljeno, prevoženi kilometri: 84.860 km, moč: 375 kW (509,86 KM), prva registracija: 02/2024, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 02/2026, zavore: retarder, barva: zelen, vrsta prenosa: mehanski, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, Tractor Unit 4x4 Hydrodrive MAN TGX 18.510 BL SA in Full Specification First Registration 02/2024 Mileage: 84,860 km GM Driver's Cab with 1 Bed, Air-Suspended Cab, Swinging Entry Steps, 3-Piece Steel Bumper, Safety Package Light & Vision Plus, Driver Comfort Package, Interior Light Package Plus, Storage Package, Comfort Driver's Seat with Alcantara/Leather Upholstery, Heated and Ventilated Driver’s Seat, Rotatable Vario Passenger Seat, All LED Lighting, LED Headlights, LED Fog Lights, High Beam Assist, Automatic Light Control, 12.3-inch Instrument Cluster, MAN Truck Navigation, Climatronic Air Conditioning, Auxiliary Water Heating, Refrigerator Under Bed, 220-Volt Socket, ZF 16-Speed Manual Transmission RETARDER and additional reinforced engine brake EVBec Leaf/Air Suspension Wheelbase 3,600 mm, short and highly maneuverable Aluminum Fuel Tank 490 Liters 2-Line Tipping Hydraulics MEILLER, Large Aluminum Hydraulic Oil Tank approx. 200 L, Switchable High/Low Pressure System, Tyres: Front Axle: 385/65 R 22.5 Rear Axle: 315/80 R 22.5 ALCOA Dura-Bright High-Gloss Alloy Wheels Full Safety Package with Active Steering MAN Comfort-Steering, Lane Change Assist LCS and Turn Assist, Side Camera System SCS and All-Round View Assist, ACC Adaptive Cruise Control, EBS, Off-Road ABS with Additional Terrain Logic, Full Brake Assist, Emergency Brake Assist EBA, Lane Departure Warning LDW, Kfedewwv Urspfx Ab Usa RENTING is the new BUYING – Available immediately from us with Full-Service Rental----

Stanje: rabljeno, največja dovoljena obremenitev: 120.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/1993, Leto izdelave: 1993, Oprema: ABS, Manufacturer: GOLDHOFER Model: THP-SL Year of manufacture: 1993 / 2010 Comprising: - Gooseneck with hydraulic power unit (Year: 1993 – Hydraulic system: 2003) - 2-axle bogie module (Year: 2010) - 3-axle bogie module (Year: 1993) - 4-axle bogie module (Year: 1993) - Fixed excavator deck 5.8m (Year: 2010 – Payload: 100 t) - Extendable excavator deck 8m + 5m (Year: 1993 – Payload: 120 t) Available immediately. Kfedjt Irxxopfx Ab Uea Subject to prior sale and errors.

Stanje: rabljeno, skupna masa: 92.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2006, dolžina tovornega prostora: 19.000 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 815 mm, skupna širina: 3.000 mm, Oprema: ABS, Goldhofer STZ-H6-57/80A telescopic lowbed trailer for wagon transport --- Approval Technical 1 Speed: 80 km/h 65 km/h Fifth wheel load: 23,000 kg 26,000 kg Kfodpelhn Afefx Ab Uea Rear axle load: 10,000 kg 11,000 kg Gross weight: 83,000 kg 92,000 kg Payload: 52,500 kg 61,500 kg Unladen weight (without accessories): 30,500 kg --- Gooseneck: Length: 4,000 mm Width: 2,480 mm Build height: 235 mm Fifth wheel height: 1,350 mm Front DLR: 1,420 mm Rear DLR: 2,700 mm Kingpin: 3.5 inch Taper: beveled 10 degrees Front corners: beveled 45 degrees Flooring: spruce 50 mm Landing legs: mechanical Width with side walls: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically liftable and lowerable, with mechanical drop-in landing legs and hydraulic support cylinder. Hydromechanical forced steering (2-circuit system) in flat design (build height 235 mm) with adjustable guide elements and THP steering cylinders. --- Loading area: Type: Platform Liftable: No Length: 13,000 mm Width: 3,000 mm Flooring: steel/spruce 50 mm Wheel recesses: No Extensions: No Extendible: Yes, single telescopic Length1: 10,000 mm Loaded platform heights: Platform height 1: 815 mm The loading area is telescopic, constructed as an external and internal tube, with a 1,070 mm long fixed front platform section. A pin-lug coupling integrated into the fixed platform section is used for connecting bolster bridge extension beams. The profile rails we have welded serve as a rail runway for track gauges 1,000 mm (track width 1,015 mm) and 1,435 mm (track width 1,450 mm). Locking of the extension stages via spring-loaded cylinder and conical bushings. Platform height on the central frame tube (outer tube) approx. 815 mm (+/- 130 mm) Platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) --- Rear chassis: Chassis type: Standard Loaded platform height: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Flooring: steel Extensions: No Wheel recesses: No Excavator trough: No --- Axles: Number of axles: 6 Lift axle: see accessories Axle type: cranked steering knuckle Axle equalization: hydraulic Axle make: BPW/Eco Drive modes: 1 Axle lift (1) +/-: 130/130 mm Axle lift (2) +/-: 0/0 mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift bellows --- Steering: Number of steered axles: 6 Steering arrangement: all steered Max. steering angle: 45° Steering type: hydraulic, 2-circuit --- Tyres: Size: 235/75 R 17.5 143/141 J Type: twin tires Rim type: disc wheels Rim centering: hub centering --- Brake code: According to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS del: No Parking brake: spring-actuated EBS: No ECAS: No Note: Brake calculation no.: GH 4324S --- Chassis note: Steering designed for extended position with greater steering angle for the front axles Open wheel cutouts above the wheels with narrow cross members in between (aluminium covers, see accessories below) Controls are mounted protected on the left in the direction of travel Rims: 17.5 x 6.75 Cranked axles!!! --- Rear of vehicle: Design: Standard 90° Ramp mounting: see accessories Floor covering: steel plate Rear overhang from last axle: 1,300 mm Support: see accessories --- Load securing: Lashing rings Number: 5 Load capacity: up to 10 t each Arrangement: 2 pairs on the gooseneck 3 pairs on the loading area --- Rear extension: Max. load capacity 15,000 kg with a wagon bogie, constructed from profiles, without

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: YAFTL40900001004, največja dovoljena obremenitev: 80.000 kg, skupna masa: 105.000 kg, velikost pnevmatike: 70%, medosna razdalja: 1.360 mm, barva: rdeča, Leto izdelave: 2009, Oprema: ABS, Country of manufacture: Netherlands Body options: Disc brakes, Central lubrication system, Moving floor, Forced steering, Full side opening Kfjdpevtygfsfx Ab Usa Further information: Low-bed pipe carrier semi-trailer, extendable, hydraulic suspension, side width adjustable up to 3,500 mm interior and 4,200 mm exterior, latest generation pendular axles Option to add a 2-axle dolly to create a pipe carrier combination 2+4. Load capacity 85 tons We have 2 identical units available in excellent condition.

Stanje: novo, največja dovoljena obremenitev: 48.180 kg, skupna masa: 70.700 kg, konfiguracija osi: 3 osi, skupna širina: 2.750 mm, Oprema: ABS, You can find our entire vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Complete specifications available on request. GOOSENECK * Gooseneck with integrated 1-axle running gear (pendulum axle) in a detachable design * Gooseneck hydraulically adjustable in height, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front taper approx. 60° * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, tapered design * 1 pair of mechanical supports at the front of the gooseneck, foldable (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized version * 1 plug-in aluminum rear board, approx. 400 mm high, anodized version * Checker plate covering over the gooseneck * 3.5 inch king pin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the right side in direction of travel near the aluminium board, approx. 1,350 x 400 x 400 mm (L x W x H) * Hydraulic couplings from gooseneck to low bed with multi-coupling * 1 LED work light left and right at the rear cross member of the gooseneck, wired to the connection panel for the tractor unit LOADING AREA * Low-bed with external beams, designed as a telescopic loading area in low construction with front extension, including fixed approx. 50 mm thick hardwood floor, length x width approx. 8,000 mm x 2,740 mm * One locking position approx. every 1,000 mm on the extension * Fixed drive-on wedges at the front of the loading area with climbing strips * 1 lashing ring outside on the fixed drive-on wedges (LC 10,000 daN) * 1 hanging lashing ring each left and right on the front crossmember (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the inner beams of the low bed * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the outer beams of the low bed (LC 10,000 daN) * Cut-outs above the lashing rings on the top chord of the outer beams * Mechanical bolt-flange coupling from low bed to chassis, for exchanging the loading platform or adding extension beams, with electro-pneumatic-hydraulic couplings * Outer beams of the low bed feature a painted-on sand layer as anti-slip protection * 4 pairs of recessed lashing rings flush in the loading area, distributed along the outer frame/outer beams (LC 10,000 daN) * 1 lashing ring outside each left and right on the rear crossmember (LC 10,000 daN) * Folding extensions, approx. 230 mm per side * Loose extension planks, framed in steel * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam, for mounting boltable rings M24 (LC 8,000 daN) * 2 pairs of M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR * Rear chassis with closed outer frame, checker plate covering and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear PENDULUM AXLE * All axles are hydro-mechanically force-steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off valves and safety pins for securing in raised position Kfedpfswx Ddwjx Ab Uoa * Final painting of axles with 2 coats of 2-component paint, single color in DB 7350 Nova Grey * Hydraulic axle compensation * Tyres 245/70 R 17.5 3PMSF * Hanging bar for loose loading ramps at the