Polpriklopnik z nizko nakladalno ploščadjo

SCHEUERLE EuroCompact U73+5 Flachbett ausziehbar Pendela.

Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable, lowerable, and detachable - For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Lowbed: - Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered Lodpfx Ash Hm Tzsb Hshd - Burst protection valve on the axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and plug pins for securing in raised position - Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Rear upper gooseneck area closed with removable cover - 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks - Ramps can be positioned over or between the hooks - Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck - Locking point approx. every 1,000 mm on the extension - 1 lashing ring each, left and right, on the front cross member - Supply line connection strip for tractor unit, mounted at the height of outer frame profile - 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings - 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards - 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings - Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering front and rear, cable remote controlled, with axle tracking control - 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches - Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering - Foldable extensions, approx. 230 mm per side - Loose extension boards, steel-edged - 4 warning signs approx. 423 x 423 mm - Radio remote control for rear steering - 3.5” kingpin - Anti-slip coating on the left chamfer of the gooseneck - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning signs when not in use - 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm - Excavator stick trough of rear chassis closed at the rear with a removable plate - Trailer color: Mercedes-Benz 7350 Novagrey

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings Lhodpfshlz R Sjx Ab Hod - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles Ljdpfoh Hm Thsx Ab Hohd - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: novo, številka stroja/vozila: ...7329, prevoženi kilometri: 622 km, moč: 309 kW (420,12 KM), vrsta goriva: dizel, konfiguracija osi: 8x8, gorivo: dizel, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, število prestav: 16, skupna dolžina: 9.800 mm, skupna širina: 2.500 mm, skupna višina: 3.550 mm, Leto izdelave: 1996, The Iveco Trakker 8x8 tanker, model 340E42, is a highly mobile vehicle designed for refueling operations with diesel and kerosene. It features an 18,000-liter stainless steel tank manufactured by IWS DIEHL. This vehicle is in unused condition and comes from former army reserve stock, ensuring reliability and robust performance. Equipped with a 16-speed manual transmission and axle differential locks, the tanker offers solid handling and maneuverability on various terrains. It runs on single tires, specifically 365/85R20 Michelin XZL, and uses steel leaf springs for enhanced durability and load-bearing capacity. With only 622 kilometers on the odometer, this tanker is essentially new. The Iveco Trakker 8x8 is ideal for demanding environments and is a reliable choice for refueling operations that require large capacity and high mobility. = Further Information = Gross vehicle weight: 17,600 kg Engine make: IVECO Overall condition: very good Damage: none Lhedoutfy Tepfx Ab Hsd

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements Lhodpsk Af Svsfx Ab Hjd - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, največja dovoljena obremenitev: 65.400 kg, skupna masa: 93.400 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Pos. 1: Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data apply only when using a 4-axle tractor unit with the following data: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights at speed 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Gross vehicle weight rating: 94,000 kg Curb weight: approx. 29,600 kg Lodpfx Abswg N N Ie Hjhd Payload: approx. 64,400 kg (depending on load diagram / easyLOAD calculation) Dimensions Dimension b: 18,765 mm Overall length of combination: 24,165 mm Vehicle width: — Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Articulation radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front bogie Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: counter-steered Flatbed 14,400 mm (external beams), single telescopic with separating point Length x width: 7,000 mm x 2,750 mm Telescopic extension by / to max. 3,400 mm / 10,400 mm Deck height: 300 mm Plus 4,000 mm extension beam included Loaded loading height: approx. 450 mm 4-axle rear bogie Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 17.320 mm, širina tovornega prostora: 3.200 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 17.320 mm, skupna širina: 3.200 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70 R 17.5 | 143/131L (146/146F), barva: bež, Leto izdelave: 2021, Colour: Yellow Load capacity: 64,800 kg Main Features Manufacturer: Faymonville Type: GigaMax 1+4 / F-S45-2GXX Chassis number: YAFTL1009M0027562 Year of manufacture: 2021 Weights / Payload King pin load: 25,000 kg Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg Gross vehicle weight: 84,200 kg Unladen weight: 20,200 kg Payload: 64,800 kg Axles Pendle axles Hydraulic suspension All axles with hydraulic steering WABCO EBS-E braking system Tyres: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Length: 17,320 mm Load floor length: 6,800 mm 2x extension beams: 2,000 mm / 3,000 mm Load floor width: 2,750 mm / 3,200 mm Load floor height: 400 mm Ground clearance: 150 mm King pin height: +/- 1,340 mm Additional information: Gooseneck with integrated 1-axle pendle axle Hatz diesel powerpack Hydraulically operated gooseneck Aluminium sideboards on gooseneck 2x extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless steel toolbox Spare wheel + holder Rear bumper with lights 3.5" king pin Central lubrication system with 2 BEKAMAX pumps = Further Information = General Information Year of manufacture: 2021 Axle configuration Tyre size: 245/70 R 17.5 | 143/131L (146/146F) Suspension: Hydraulic suspension Lhedsvzaanspfx Ab Hed Front axle: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Rear axle 1: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Rear axle 2: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Rear axle 3: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Rear axle 4: Twin tyres; lift axle; max. axle load: 12,000 kg; steered Weights Unladen weight: 20,200 kg Payload: 64,800 kg Gross vehicle weight: 85,000 kg Functional Load floor height: 40 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Further information Please contact Stefan Schaapveld for further information.

Stanje: zelo dobro (rabljeno), skupna širina: 3.000 mm, barva: oranžna, Leto izdelave: 2000, Farbe: Orange 01 x Gebrauchtes Gooseneck S-THP + PPU Fahrgestellnummer / 24739-20 Baujahr/ 2000 01 x Gebrauchtes 2-Achs-Modul THP/LTSO 2 Fahrgestellnummer / 21972 Baujahr / 1995 Breite / 3.000 mm Achslast / 26.000 kg pro Achslinie Bereifung / 205/65 R 17,5 Lhedpfx Aju Abh Tjb Hod 01 x Gebrauchtes 2-Achs-Modul THP/LTSO 2 Fahrgestellnummer / 21972 Baujahr / 1995 Breite / 3.000 mm Achslast / 26.000 kg pro Achslinie Bereifung / 205/65 R 17,5 01 x Gebrauchtes 4-Achs-Modul THP/LTSO 4 Fahrgestellnummer / 21973 Baujahr / 1995 Breite / 3.000 mm Achslast / 26.000 kg pro Achslinie Bereifung / 205/65 R 17,5 01 x Gebrauchtes 4-Achs-Modul THP/LTSO 4 Fahrgestellnummer / 21974 Baujahr / 1995 Breite / 3.000 mm Achslast / 26.000 kg pro Achslinie Bereifung / 205/65 R 17,5 01 x Gebrauchtes 4-Achs-Modul THP/LTSO 4 Fahrgestellnummer / WGOTHP045W0024047 Baujahr / 1998 Breite / 3.000 mm Achslast / 26.000 kg Bereifung / 205/65 R 17,5 = Weitere Informationen = Baujahr: 2000 Technischer Zustand: sehr gut Optischer Zustand: sehr gut Preis: Auf Anfrage Bitte wenden Sie sich an Stefan Schaapveld für weitere Informationen.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2006, skupna širina: 2.850 mm, vzmetenje: drugo, velikost pnevmatike: 285/70R19.5, barva: črn, Leto izdelave: 2006, Oprema: ABS, = Additional Options and Equipment = - Central lubrication = Remarks = Faymonville Jeep Dolly D3 Year: 10-2006. 1 x lift axle. 1 x friction-steered axle (trailing steering axle). Air suspension. Maximum technical weight: 56,000 kg. Faymonville STBZ-5VA Year: 10-2006. Pendulum axles. Removable gooseneck. Movable platform. Extendable load bed: 400 cm. Load bed dimensions: 650 + 400 cm. Gooseneck load capacity: 50,000 kg. Maximum technical weight: 119,680 kg. = Further Information = Axle Configuration Tyre size: 285/70R19.5 Lsdpfexbng Eex Ab Hjhd Brakes: Drum brakes Front Axle 1: Twin tires; Left inside tread: 15%; Left outside: 60%; Right inside: 60%; Right outside: 60%; Suspension: Air suspension Front Axle 2: Twin tires; Left inside tread: 30%; Left outside: 30%; Right inside: 40%; Right outside: 60%; Suspension: Air suspension Front Axle 3: Twin tires; Steered; Left inside tread: 30%; Left outside: 70%; Right inside: 60%; Right outside: 70%; Suspension: Air suspension Rear Axle 1: Twin tires; Steered; Left inside tread: 30%; Left outside: 60%; Right inside: 40%; Right outside: 70%; Suspension: Hydraulic suspension Rear Axle 2: Twin tires; Steered; Left inside tread: 50%; Left outside: 50%; Right inside: 30%; Right outside: 75%; Suspension: Hydraulic suspension Rear Axle 3: Twin tires; Steered; Left inside tread: 60%; Left outside: 60%; Right inside: 60%; Right outside: 60%; Suspension: Hydraulic suspension Rear Axle 4: Twin tires; Steered; Left inside tread: 60%; Left outside: 60%; Right inside: 40%; Right outside: 50%; Suspension: Hydraulic suspension Rear Axle 5: Twin tires; Steered; Left inside tread: 70%; Left outside: 70%; Right inside: 20%; Right outside: 70%; Suspension: Hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Identification Model number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information; however, no rights can be derived from the listed texts.

Stanje: rabljeno, prevoženi kilometri: 550.000 km, moč: 368 kW (500,34 KM), prva registracija: 05/2010, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 5, dolžina tovornega prostora: 8.500 mm, Oprema: klimatska naprava, parkirni grelec, * Iveco AS320S50X transporter za gradbene stroje, 4 osi * Prva registracija 2010 * 550.000 km * Euro 5 Lhedpsxybz Hofx Ab Hed * Motor Cursor C13 * 500 KM * Listno-zračna vzmetenja * 8x2 pogon osi * 2. os dvižna os * 4. os vodilna dvižna os * Klimatska naprava * Retarder * Dodatno ogrevanje * Pogonska gred (PTO) * Avtomatski menjalnik * Hidravlična rampa * Rezervoar za vodo * Nakladalna površina: 8,50 m * Medosna razdalja: 6,10 m * 1.-2. os: 4,65 m * 1.-4. os: 7,50 m * Lastna teža: 14.150 kg * Skupna teža: 32.000 kg * Nosilnost: 17.850 kg