Priklopnik sedeža z delovno ploščadjo

KÄSSBOHRER Plattform Mega SPA M3 ausziehbar

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 460.000 km, moč: 375 kW (509,86 KM), prva registracija: 04/2015, vrsta goriva: dizel, velikost pnevmatike: 385/65R 22.5 /160J, konfiguracija osi: 6x4, gorivo: dizel, barva: črn, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2015, Colour: Black Ijdpfx Absvl H Uyo Uetr Details Manufacturer: Mercedes-Benz Model: Actros 3351 LS 6x4 Chassis Number: WDB9634261L945367 Year: 29.04.2015 Mileage: approx. 460,000 km Engine: 510 hp | 375 kW | EURO 6 | 6-cylinder | Diesel Transmission: Automatic gearbox Front Axle: 9,000 kg | Leaf suspension | 385/65R 22.5 /160J Second Axle: 13,000 kg | Air suspension | 315/80R 22.5 /159 J Rear Axle: 13,000 kg | Air suspension | 315/80R 22.5 /159 J GVW: 33,000 kg GCW: 120,000 kg Equipment Large fuel tanks AdBlue tank 24-volt electrical system Jost JSK 38 G axial fifth wheel Manually sliding fifth wheel Chassis cover Work lights Toolboxes Push bar Roof spoiler Cab Sleeper cab Multi-function steering wheel Cruise control Sun visor 2 x beds Comfort seats Climate control Radio CD player / Bluetooth Television screen = Further Information = Driveline AdBlue system: Yes Axle Configuration Front axle: Tyre size: 385/65R 22.5 /160J; Max. axle load: 9000 kg; Steering; Suspension: Leaf spring First rear axle: Tyre size: 315/80R 22.5 /159 J; Twin tyres; Max. axle load: 13000 kg; Suspension: Air suspension Second rear axle: Tyre size: 315/80R 22.5 /159 J; Twin tyres; Max. axle load: 13000 kg; Suspension: Air suspension Weights Payload: 120,000 kg GVW: 33,000 kg Condition Technical condition: Very good Visual condition: Very good Financial Information Price: Upon request Further Information Please contact Stefan Schaapveld for further information.

Stanje: novo, lastna masa: 11.000 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, Leto izdelave: 2025, Oprema: ABS, GVN prikolica 4-osovinski standardni niskopodni model. Za više informacija molimo kontaktirajte nas. Isdeqxbapspfx Ab Uotr

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Itsdpfxeg Sk Tve Ab Ujr Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 29.600 kg, skupna masa: 39.000 kg, dolžina tovornega prostora: 13.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, Oprema: ABS, NEW, 3-axle low loader with SAF axles, 3rd axle steering, toolbox on gooseneck, spare wheel carrier, double hydraulic rear ramps 4000 x 800 mm, manually adjustable, 3+3 RUD certified 10-ton lashing rings mounted on 6+6 slots, 2+2 CARTEC certified 8-ton lashing rings on the upper deck, low loading deck height 850 mm, low loading deck length 10,030 mm Iodsv Upfyepfx Ab Uetr

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam Itodpfx Ajiuy Nlob Uor - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 38.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: sivo-črna, Oprema: ABS, Cargo Area: • Extendable cargo area with pneumatically operated locking mechanism • Cargo platform with approx. 30 mm thick timber flooring • 7 pairs of external folding lashing rings (LC 5,000 daN) • 3 pairs of external folding lashing rings (LC 10,000 daN) • Cutouts in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydromechanically forced-steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with lift and lower valve • Axle tool kit • Tyres: 385/65 R 22.5 • TPMS tire pressure monitoring system compliant with ECE R 141 Brake System: • WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX at the front control strip with 24N, 24S & 15-pin sockets • Connections as per ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Standard Accessories Included: • Remote-controlled steering from front and rear via cable remote control with push buttons, including single-track axle monitoring • 4 wheel chocks with holders mounted on the front wall • 2" king pin • One galvanized steel front wall, approx. 1,600 mm high • Yellow-red air couplings at the galvanized front connection strip • White reflective tape compliant with EU standards on both sides, on extension, and at the rear of the trailer in red • European reflective plates (red-yellow) at the rear of the trailer • One mud flap at the rear of the trailer • Operating manual and instructions • Mount for a revolving beacon at the rear of the trailer • Cargo area with approx. 30 mm thick timber floor inset in omega profiles • 10 pairs of stake pockets (100 x 50 mm) in the outer frame of the cargo bed • 1 spare wheel holder under the cargo area, right-hand side in the direction of travel • Electro-hydraulic unit • At the gooseneck and rear panel left/right, each with bracket for warning signs, incl. socket • Coated sand layer on the main beam as anti-slip protection • 6 pairs of WADER container pockets in the cargo area for 1x20ft, 2x20ft or 1x40ft containers; additional locking point provided in the extension for a 45ft container • 4 pairs of transverse stake pocket rails in the cargo area for plug-in stakes 100 x 50 mm • Access ladder mounted on the right side in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm at the front under the cargo bed, left in the direction of travel • BEKAMAX (Pico) centralized lubrication system with removable pump guard • Lift axle on front axle, controlled via TEBS E according to dynamic axle load and load status • Wireless remote control for steering, in addition to cable operation, with indicator lights on receiver for single-track monitoring • Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, equipped with position light • Bracket for revolving beacon on the warning signs • 80 km/h speed sticker on rear and both sides • Load gauge for axle load determination, including load chart • HRM (High Resistance Metallisation) of the outer frame Itodpfx Absiu Etro Ujr • Complete steel construction shot blasted; subsequently, defined visible surfaces metallised by hot-dip application with ZINACOR 850 (85% zinc – 15% aluminium)

Stanje: novo, največja dovoljena obremenitev: 36.461 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.480 mm, skupna višina: 860 mm, Leto izdelave: 2025, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings at the front central beam (LC 10,000 daN). C40/4 grating floor (point load 2.3 t on an area of 20 x 20 cm), over the axles checker plate covering. Two-part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections, hydraulic lifting system. Max load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length of 16,500 mm when in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in line with ECE R 141. Data transmission to the towing vehicle is via the standardised EBS interface according to ISO 11992. The towing vehicle must be able to receive and display this data for correct indication. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Iedpfxjw Dl Hwo Ab Uetr Air suspension with lift and lower valve. Axle tool kit. Brake System: WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to tractor unit. Electrical System: Electrical system according to EU regulations, LED lighting 24 V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15 pin. Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: Steel construction made of high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Curtainsider Structure: Curtainsider body, ??? 3,960 mm ??? - Galvanised front wall with a tensioning mechanism for sliding curtains. - "EDSCHA" roof, forward sliding on ALU roof beam profiles (bolted to front and rear wall). - 3 pairs of sliding stanchions in the loading platform. - The body is hydraulically extendable at the rear by approx. 750 mm left and right. - Sliding roof with upward folding portal beam. - Sliding curtain with 700 mm length reserve and tie-down straps approx. every 600 mm. Height upper edge of body approx. 3,960 mm (laden). - Driving with an open sliding roof is not permitted and will cause damage to the curtain. Paintwork: Entire steel structure is shot-blasted automatically after welding using a wheel blast system. Second blasting with corundum for optimal coating system adhesion. HRM-metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection. Final painting with two layers of 2K topcoat, single colour, shade selectable according to RAL 841GL. Rear section metalized and painted RAL 9010 (pure white). No metallic paint.

Stanje: novo, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 1.180 mm, Oprema: ABS, Availability: approx. 3-4 months after receipt of order NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Unladen weight: 6,100 kg # Fifth wheel load: 15,000 kg # Coupling height: 980 mm # BPW axles with disc brakes # 1st axle as lift axle # Jost landing gears 24 t # Wabco 4S/2M EBS with RSS # 2 x 7-pin and 1 x 15-pin electrical connectors # 24V Aspöck lighting system # Tyres: 6 x 445/45 R19.5 branded tyres on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Wide load equipment (4x galvanized wide load signs with LEDs + 1x flashing beacon) # Stainless steel toolbox, right side in direction of travel # 6x2 Jost container locks, retractable # Stanchion holder mounted on front wall + 20 stanchions (1,500 mm) # 4 rows of stanchion pockets Itedpfxjivw D Io Ab Uer # 10 x 2 stanchion pockets in the frame # 7 x 2 lashing rings 4t on platform, 108 lashing points in outer frame, each 2t # Front wall with Code XL certificate! # Chassis KTL-coated and painted MB 7350 novagrau or RAL 3020 # Front wall MB 7350 novagrau or RAL 3020 ----Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in Goch

Stanje: rabljeno, največja dovoljena obremenitev: 37.575 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2022, naslednji pregled (TÜV): 10/2025, skupna širina: 2.540 mm, Oprema: ABS, More vehicles available at Excerpt from the equipment list. Full specification upon request. Gooseneck: - Gooseneck with front corners bevelled approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading platform: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of built-in wheel recesses with cover, approx. 1,610 x 700 x 400 mm (L x W x D) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over the wheel recess – max. point load approx. 3.5 t each Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle trailing steering - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise and lower valve - Axle tools Tyres: - Tyre size: 235/75 R 17.5 Landing legs: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t tested load) Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: Iodpfx Aboxfx R Aj Uotr - HRM metallization (High Resistance Metallisation), complete steel structure shot-blasted to SA2.5–SA3, then hot-finished with ZINACOR 850 (zinc 85% – aluminum 15%) - High-quality 2-component (2K) topcoat, single color RAL 3002 carmine red Included accessories: - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Galvanized, extendable widenings, approx. 230 mm per side - Galvanized folding supports under the rear bevel of the loading area - Bracket for a revolving beacon at the rear of the trailer - Plug-in aluminum side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H), rear galvanized stanchions removable (body length approx. 2,560 mm) - 1 galvanized toolbox, integrated into the gooseneck chamfer - Hardwood rear bumper at the gooseneck rear wall towards the loading platform - 3 pairs WADER container locks in the platform for one 20' (30') or one 40' container - 5 pairs of stanchion pockets for approx. 100 x 50 mm stanchions in the outer frame - Hardwood extension boards, maximum load permissible on an area of approx. 200 x 200 mm up to approx. 3.5 t - Galvanized holder for extension boards, left and right under the platform - Painted anti-slip sand coating on the checker plates, over the king pin and platform - 2 LED reversing lights mounted on the rear crossmember - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - 4 warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, each with an LED position light - Load pressure gauge for axle load calculation, including load diagram - 5 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high - Rack for max. 7 pairs of plug-in stanchions approx. 100 x 50 mm, at the front wall - One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering, including electro-hydraulic unit. Ramp with hydraulically folding ramp sections, hydraulically operated lifting device, and hydraulically adjustable; maximum load ...

Stanje: rabljeno, prevoženi kilometri: 1.050.434 km, moč: 321 kW (436,44 KM), prva registracija: 11/2005, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 3, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Renault Premium 440.19 DXi, first registered 11/2005, mileage 1,050,434 km, 4x2, automatic transmission, Euro 3, engine brake, ABS, air conditioning, cruise control, auxiliary heater, 1 bed, refrigerator, 1 tank, differential lock, ANALOG TACHOGRAPH, ALUMINIUM RIMS, spare wheel, front tyres 385/55 R22.5 with 14 mm tread, rear tyres 315/70 R22.5 with 6 mm tread. More info at: FB: Dvorak Trucks Czechia IMPORT-EXPORT-SALE-PURCHASE-COMMISSION SALES OF TRUCKS AND CONSTRUCTION MACHINERY TRUCK SERVICE TYRE SERVICE Ijdpfswauz Asx Ab Uetr TRUCK WASH TACHOGRAPH TESTING