Polpriklopnik z nizko nakladalno ploščadjo

HRD HRD STLM3M Radmulden Rampen Lenkachse

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 02/2007, barva: rumena, Leto izdelave: 2007, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje = Dodatne informacije = Zadnja os 1: Dvojne pnevmatike; vodljiva Zadnja os 2: Dvojne pnevmatike; vodljiva Lastna teža: 13.000 kg Nosilnost: 29.400 kg Dovoljena skupna masa: 42.400 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Cena: Na povpraševanje GOLDHOFER STZ-L2-22/80A SEMI NIZKONAKLADALNA PRIKOLICA Itodpfxjuxvdbe Ab Ujr 2x BPW ECO vodljive osi Velikost pnevmatik: 245/70/17.5 Izvlečna nakladalna platforma Dimenzije: 820 cm + 590 cm izvlečno, skupna dolžina platforme: 1410 cm Širina platforme: 255 cm Višina platforme: 88,5 cm Kljuke za pripenjanje, stranice, twistlock-i LED luči Omarice za orodje Centralno mazanje Elektro-hidravlična rampa 2-delna, skupno dolžine 380 cm 63 cm široka 2x podpore na zadnjem delu nizkonakladalnika Labodji vrat + zadnji del prikolice poševno zaključen Daljinski upravljalnik Spremljajte nas na Instagramu: GeurtsTrucks Govorimo nemško Govorimo špansko Govorimo angleško

Stanje: rabljeno, največja dovoljena obremenitev: 23.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 19.100 mm, Oprema: ABS, Faymonville 3-Axle Multimax Low Loader F-S43-1AAF First registration: .23 Gross weight: 35,000 kg Technical permitted gross mass: 58,600 kg Unladen weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg Max. capacity: 11,200 kg + 11,200 kg + 11,200 kg Kingpin load / fifth wheel load: 11,000 kg Length: 13,675 mm, extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading platform: 13,300 mm, extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tyres: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV valid until: Further information available upon request by email! Ijdpfx Abju Ry T Rs Uotr No guarantee for the accuracy of information/errors excepted! Details provided online are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability for errors, input mistakes and data transmission errors. Subject to change without notice. Permanent purchase and sale as well as trade-in and rental of crane and lifting vehicles as well as construction and heavy-duty vehicles.

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Itedpfsg Sk Tvox Ab Uer Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).

Stanje: rabljeno, največja dovoljena obremenitev: 34.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2009, naslednji pregled (TÜV): 07/2024, Oprema: ABS, Further questions are welcome via WhatsApp. Itjdpfx Ajt E Eunjb Uer

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket Itodpfx Absiu Er Ae Usr - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: rabljeno, največja dovoljena obremenitev: 39.550 kg, skupna masa: 54.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2007, naslednji pregled (TÜV): 08/2024, skupna širina: 2.750 mm, Leto izdelave: 2007, Oprema: ABS, Manufacturer: Goldhofer Model: STZ-VL3-39/80 Year of manufacture: 2007 Unladen weight: 14,450 kg Isdjucmz Aopfx Ab Uotr Payload: 39,550 kg Axles: 3x BPW (forced steering, air suspension) Tyres: Continental HTR 2 (245/70 R 17.5) Length: 16,000 mm Width: 2,750 mm – 3,250 mm Gooseneck: Internal: 2,600 mm x 2,500 mm plus storage compartment Lashing points: 4 Low bed: 7,500 mm x 2,750 mm Lashing points: 6 Platform: 4,100 mm x 2,750 mm Lashing points: 4 Subject to prior sale and errors excepted.

Stanje: novo, največja dovoljena obremenitev: 39.600 kg, skupna masa: 55.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2025, Oprema: ABS, * DOLL tronic upravljalni in krmilni sistem vključno z radijskim daljinskim upravljalnikom * Hidravlično snemljiv labodji vrat * Hidravlično krmiljenje * Zunanji glavni okvir Ijdpfx Absrd T E Ss Uotr * Obsežen paket za pritrjevanje tovora * Dolžina nizkega ležišča: 13.000 mm (7.500 mm + 5.500 mm) * Opcijsko obsežna dodatna oprema Slike se lahko razlikujejo od originala. Podatki brez garancije.

Stanje: novo, številka stroja/vozila: 1acf251a278ec5cde4067a7b1, lastna masa: 5.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis: Semi-trailer, fleet use Fine-grain steel welded construction, fifth wheel plate with interchangeable 2'' kingpin Outer frame with slightly sloped design, new version with load-lock profile for attaching tension straps 24 t two-speed landing gear, single-side operation, straight base, without compensating slide Free support foot dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection: aluminium Rear underrun protection: steel Quarter shell mudguards in front of and behind each axle 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with shelf, width=620/height=360/depth=440 mm, lockable with a padlock (padlock not included) Axles & suspension Drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Braking system Two-line compressed air braking system, colour-coded line routing for easy service Spring-loaded parking brake Duomatic connection at the front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise/lower valve Vehicle stability control system Wheels and tyres 235/75 R17.5, make as per manufacturer's choice Steel rims, factory silver Electrics Itodpfekv Uvzjx Ab Uer 24 Volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin socket at the front, without connecting cable Flooring Anti-slip phenolic plywood, approx. 30 mm thick, for high point loading, suitable for forklift axle loads up to max. 5,600 kg Front wall / corner stanchions 25 mm aluminium hollow section, approx. 1,350 mm high, steel corner stanchions in volume version Country of registration / Plates Germany with Dekra inspection and expert report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized incl. passivation, 15-year warranty against rust-through Front wall aluminium Attention! Archive photos shown!

Stanje: novo, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Oprema: ABS, NEW VEHICLE Kässbohrer extendable platform MEGA SPA MR3 with wheel recesses Color: Nova Grey Availability: approx. 6 months after receipt of order # Fifth-wheel load: 18,000 kg # Coupling height: 950 mm # Extendable to 6,900 mm Axles / Braking system: # BPW axles with 17.5" drum brakes # 3rd axle as trailing steering axle # 1st axle as lift axle # WABCO braking system 4S/3M # 13 x Continental HTR 2 245/70/17.5" on steel rims # Jost landing legs, 24 t capacity # 2 x 7-pin and 1 x 15-pin electrical connections # 24V lighting system by Aspöck # 2 plastic wheel chocks Equipment: # Wheel recesses with hardwood covers # Non-removable sliding table, 300 mm length # 1 pair of aluminum loading ramps, 2,400 mm long, 600 mm wide, capacity 32,000 kg included # 30 mm hardwood floor # Oversize transport kit (4x galvanized oversize plates with LEDs + 1x rotating beacon) # Toolbox mounted on the right in direction of travel # 6x2 holes for container locks, suitable for transporting 1x20", 1x40" or 1x45" containers # 4 removable container twistlocks Itjdjgimw Uopfx Ab Usr # Stake holders mounted on the front wall, without stakes # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 8 x 2 lashing rings (10 t), 5 x 2 lashing rings (8 t), 108 lashing points in the outer frame, each rated to 2 t # Storage box for aluminum ramps under the chassis behind the third axle # Front wall 1,500 mm + 500 mm high, with Code XL certificate! # Chassis KTL coated and painted in MB7350 nova grey # Front wall MB7350 nova grey ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in Goch

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 2.550 mm, Oprema: ABS, Availability: Approximately 5 months after order confirmation! Kässbohrer 3-Axle Extendable Low Loader / NEW VEHICLE SLA 3 SCAN Axles / Braking System: # BPW axles with 17.5" drum brakes # 3rd axle as self-steering trailing axle # 1st axle as lift axle # WABCO 4S/3M braking system # 13 x 245 / 70 / 17.5" on steel rims Low Loader: # Fifth wheel height: 1250 mm # Loading bed length: 9,240 mm + 6,000 mm extendable # 9 x 2 lashing rings (6t) in the outer frame # 2 x 2 lashing rings (6t) in the gooseneck # 4 x 2 lashing rings (6t) on the low bed # 8 x 2 stake pockets Ø63 # Extendable side extensions for oversize loads, 300 mm # 40 mm hardwood flooring # Colour: RAL 7021 Loading Ramps: # Hydraulically adjustable ramps with 40 mm hardwood flooring # 4,200 mm length x 750 mm width x 10° ramp angle # 2 kW electrohydraulic pump # NATO socket for operation of the electrohydraulics incl. cable Other Features: # 4 x oversize load signs with brackets for beacons # 1 x toolbox mounted on the right-hand side (in the direction of travel) # JOST heavy-duty landing gear at the front # Manual rear support, galvanized Ijdpfx Ashyrthsb Ujtr # 2" kingpin # 24V Aspöck lighting system # Including 2 storage stands # Including 12 container locks # Spare wheel holder with spare wheel ---- Errors, subject to change and prior sale! Location: KTH-Trailer GmbH, 47574 Goch / Germany.