Polpriklopnik z nizko nakladalno ploščadjo

KÄSSBOHRER Tieflader lowbed SLA 3 SCAN Extandable

Stanje: novo, lastna masa: 30.000 kg, največja dovoljena obremenitev: 9.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 r 17,5, Leto izdelave: 2023, Oprema: ABS, NEW, BPW drum brakes, 1st axle liftable, 3rd axle steering, gooseneck platform with 40 mm hardwood flooring, multiple lashing rings, lateral extensions with special load signs, toolbox, double hydraulic ramps, hydraulically extendable and retractable, side boards on the neck, electric winch with 5,600 kg capacity. Gjdpfxjg Dnc Ae Afzjbg

Stanje: novo, številka stroja/vozila: 1, lastna masa: 10.200 kg, največja dovoljena obremenitev: 28.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: temno rdeča, Leto izdelave: 2021, Oprema: ABS, new Ceylan low loader semi-trailer, factory fresh, 3 axles with 1st liftable and 3rd steering axle, ABS, low bed section 10m long x 85cm high from the ground, total length 13.70m, side pillars, side extensions, Rud hooks 10 tons each, full-width double electro-hydraulic ramps, prearranged for electric winch, WARRANTY - READY FOR IMMEDIATE DELIVERY SUBJECT TO PRIOR SALE, INTERDRIVE SRL - PARMA Gsdpfeilglnjx Afzsbg

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 2.550 mm, Oprema: ABS, Availability: approx. 4 months after receipt of order Kässbohrer 3-Axle Low Loader with Wheel Recesses, Extendable / NEUFahrzeug (New Vehicle) Axles / Brake System: # BPW axles with 17.5" drum brakes # 3rd axle with self-steering function # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x Continental HTR 2 245/70/17.5" on steel rims Low Loader: # Fifth wheel height: 1,250 mm # Lowered deck length: 9,240 mm + 3,500 mm extendable # 9 pairs of 6to lashing rings on outer frame # 2 pairs of 6to lashing rings in neck # 4 pairs of 6to lashing rings on the lowbed # Retractable overwidth boards 300 mm # 45 mm hardwood floor # Colour: MB 7350 nova grey or RAL 3020 traffic red # Excavator arm recess Ramps: # Hydraulically sliding ramps with 40 mm hardwood covering # 4,200 mm long x 850 mm wide x 11° approach angle # Electro-hydraulic pump 2kW # NATO socket for operation of the electrohydraulics incl. cable Other features: # 4 x oversize warning panels with bracket for rotating beacon # 1 x toolbox on the right in driving direction # JOST heavy-duty landing gear at front # Manual rear supports, galvanized # 2-inch king pin # 24V Aspöck lighting system # Spare wheel carrier with spare wheel ---- Gbsdpfx Asgimywjfzeg Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable, lowerable, and detachable - For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Lowbed: - Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Burst protection valve on the axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and plug pins for securing in raised position - Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Rear upper gooseneck area closed with removable cover - 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks - Ramps can be positioned over or between the hooks - Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck - Locking point approx. every 1,000 mm on the extension - 1 lashing ring each, left and right, on the front cross member - Supply line connection strip for tractor unit, mounted at the height of outer frame profile - 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings - 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards - 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings - Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering front and rear, cable remote controlled, with axle tracking control - 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches - Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering - Foldable extensions, approx. 230 mm per side - Loose extension boards, steel-edged - 4 warning signs approx. 423 x 423 mm - Radio remote control for rear steering - 3.5” kingpin - Anti-slip coating on the left chamfer of the gooseneck - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide Gbjdpeh Hm Tzefx Afzeg - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning signs when not in use - 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm - Excavator stick trough of rear chassis closed at the rear with a removable plate - Trailer color: Mercedes-Benz 7350 Novagrey

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted Gjdpfek Af Svsx Afzebg - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, številka stroja/vozila: 3, lastna masa: 9.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: bela, Leto izdelave: 2022, Oprema: ABS, brand new Ceylan low loader semi-trailers available for immediate delivery, with double electro-hydraulic ramps, extendable outriggers, RUD hooks, 10m bed length, 85cm deck height, also available with grated ramps, EBS, 3 axles (1st liftable, 3rd steering), warranty included – DEALER: INTERDRIVE SRL - PARMA Gbedpfx Ashzaq Rsfzog

Stanje: novo, konfiguracija osi: 3 osi, Oprema: ABS, Availability: approx. 4 months after receipt of order! Kässbohrer 3-axle low loader rigid / non-extendable NEW VEHICLE Axles / brake system: # BPW axles with 17.5" drum brakes # 3rd axle as trailing steering axle # 1st axle as lift axle # WABCO braking system 4S/3M # 13 x branded tires 245 / 70 / 17.5" on steel rims Low loader: # Fifth wheel height: 1,250 mm # Low bed length: 9,240 mm # 7 x 2 stake pockets 52 x 102 mm # Lashing rings on gooseneck: 1 x 2 10t, 2 x 2 5t # Lashing rings on rear platform: 3 x 2 10t, 4 x 2 5t # Oversize boards extendable by 300 mm Godpeht Tt Hsfx Afzobg # Hardwood floor 45 mm # Colour: RAL 3020 Traffic Red Loading ramps: # Hydraulically adjustable ramps with 40 mm hardwood surface # 4,200 mm long x 850 mm wide x 9° approach angle # Electric hydraulic pump 2kW # NATO socket for operation of electrohydraulics incl. cable Other features: # 4 x oversize signs with brackets for beacon # 1 x toolbox mounted on the right in the direction of travel # JOST full-length landing gear at front # Manually operated rear support, galvanized # 2" king pin + 2nd position for king pin # 24V lighting system Aspöck # Spare wheel carrier with spare wheel

Stanje: novo, konfiguracija osi: 3 osi, širina tovornega prostora: 2.000 mm, prostornina tovornega prostora: 30 m³, skupna višina: 3.690 mm, Oprema: ABS, Delivery time: approx. 4 months after receipt of order! Kässbohrer STN LC 30m³ Slurry Tanker NEW VEHICLE Tank # Self-supporting stainless steel tank (V2A, AISI 304i, DIN1.4301) # Capacity: 30m³ # 1 compartment with 3 anti-surge baffles # 1 x filling dome/manhole DN 500 # Steel walkway left & right # Ladder for access on the right # End caps & tank: RAL 9006 aluminium grey Chassis & Axles # BPW Airlight II axles with 22.5 inch disc brakes # Wabco EBS 4S/2M brake system with RSS # Wabco ECAS air suspension system # 6 x branded tyres 385/65 R 22.5 on steel rims # 1st axle as lift axle # Galvanised chassis from double-T welded construction # Chassis: MB 7350 Nova Grey Other & Accessories # Aspöck 24V lighting # Rear left LED work light # Plastic toolbox rear left Rental also possible on request! --- Subject to errors, modifications, and prior sale! Gbodpfx Aegimzxofzsg Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide Gjdpfx Ajk Aht Uefzobg - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, 3-axle MULTIMAX *PLUS low-loader semi-trailer, air-suspended and hydraulically forced-steered axles. Godpfx Aeizu Ntsfzjbg Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Gross weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Neck length approx.: 3,900 mm Neck width approx.: 2,480 mm King pin steering radius to rear approx.: 2,100 mm Saddle height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: * Loading platform width approx.: 2,540 mm Deck height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm *Gross weight depending on fifth wheel load: Yes Special permit required if country-specific regulations are exceeded. Technical description: Gooseneck: Gooseneck in SNT design for optimized load bed length, length approx. 3,900 mm, rear sloped approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Load platform: Load platform, length approx. 9,600 mm with rear slope approx. 900 mm x 6°. Section of platform after the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, length approx. 4,920 mm, width approx. 900 mm. Open grating surface. Hydraulically folding ramp tips. Each ramp hydraulically adjustable sideways approx. 235 mm outward and approx. 365 mm inward. Maximum load and approach angle according to technical data sheet C470319. Maximum ramp angle with lowered load platform: 9°. Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Axle tools included. Tyres: 235/75 R 17.5 3PMSF twin tyres. Manufacturer at our discretion. Load index 143/141J (144/144F). Brake system: WABCO EBS-E braking system according to EU regulations. Without connection cable to tractor unit. Lighting: 24-volt lighting system "ASPÖCK-NORDIK full LED" version in accordance with EU regulations (ASS 3). Metallisation: Complete HRM metallisation (High Resistance Metallisation). Entire steel structure shot-blasted, then hot-finish coated with ZINACOR 850 (Zinc 85% - Alu 15%). 6-coat painting finish: Whole steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Final painting with 2 coats of two-component acrylic paint in a single RAL colour of choice, then cavity sealing with special wax. Rims in silver. Multi-colour and special paint at extra charge. Steel construction: Made from high-tensile fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1. Welding procedure: MAG according to EN ISO 4063. Shielding gas M21 according to EN ISO 14175. Front bulkhead made of steel, removable, approx. 400 mm high. Supply line junction box for tractor unit mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin assignment differs from the ISO standard, please inform us. Anderson socket at the front connection bar. (Rema 78051-00 & Amp. 150 V.) Cable for powering the electro-hydraulic unit and/or the electric cable winch (35 mm²,