Trosmerna prekucna prikolica nakup rabljenega (445)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Manufacturer & Type • Brand / Manufacturer: Sigg Fahrzeugbau GmbH • Address: Lanzstraße 2, D-88410 Bad Wurzach • Manufacturer Brand: A • Type: A • Variant: 10V • Version: AKPSH3532401720SHXV • Commercial designation: 35K33-T1H • Manufacturer short designation: SIGG • Vehicle class: O2 (Trailer > 0.75 t – 3.5 t) • Body type: DC10 (Tipping trailer) • Date of manufacture: 14.05.2025 ⸻ Bdsdjw Sncpspfx Abmsk Vehicle Identification • VIN (Vehicle Identification Number): WSOX 11X25SX000127 • VIN location: Frame, right front • Registration certificate number: HN339068 ⸻ Authorisations • EC type approval / ABE: e12007/460924*02 • Date of issue: 15.06.2022 ⸻ Main Dimensions • Length: 4,933 mm • Width: 1,920 mm • Height: 1,140 mm • Loading area length: 3,240 mm • Wheelbase: 3,581 mm • Axle distances: • 0–1: 2,851 mm • 1–2: 730 mm • Track width axle 1: 1,317 mm ⸻ Weights • Actual mass (empty): 988 kg • Technically permissible total mass: 3,500 kg • Technically permissible mass per axle: • Axle 1: 1,750 kg • Axle 2: 1,750 kg • Technically permissible coupling point load: 150 kg ⸻ Axles & Suspension • Number of axles: 2 • Steered axles: no • Twin tyres: no • Track width steered axle: 1,375 mm • Tyre / wheel combination: • 195/14C 8PR R 106N, 5 1/2Jx14H2 ET30 • 185R14C 8PR R 104/102N, 5 1/2Jx14H2 ET30 ⸻ Brakes • Trailer air brake connections: mechanical ⸻ Towing Device • Code: DC10 • D-Value: 31.00 kN • S-Value (drawbar load): 350.00 kg ⸻ Maximum Speed • 140 km/h ⸻ Other • Type approval according to construction regulations for the carriage of commercial goods in Europe. • Vehicles with special purpose according to EU Regulation (EU) 2018/858. --- All information without guarantee --- Images may differ ---

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2020, dolžina tovornega prostora: 5.750 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 900 mm, medosna razdalja: 1.000 mm, vrsta prenosa: drugo, voznikova kabina: drugo, zavore: drugo, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and split loading platform * Front section with mesh extension, electrically tiltable on both sides Bjdpfoxnqv Ajx Abmodk * Behind: flatbed/platform/low loader with loading ramps * Large flatbed loading area with phenolic plywood floor and DIN lashing eyes * Ideal for landscaping, construction industry, and much more * Loading area dimensions: 3.75 m x 2.15 m x 0.35 m, aluminium loading side panels * Payload: 2,230 kg * Tipping area dimensions: 2.00 m x 2.15 m x 0.90 m * Electric tipping drive with cable remote control * 100 km/h approval * Tipper bed with steel floor * Tridem axles * GVW: 3,500 kg * Unladen weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection is required, we will be pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that there are no misunderstandings regarding their condition and suitability. Inspection and viewing are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for mistakes or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Stanje: novo, lastna masa: 630 kg, največja dovoljena obremenitev: 2.070 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.690 mm, širina tovornega prostora: 1.550 mm, višina nakladalnega prostora: 330 mm, vzmetenje: drugo, velikost pnevmatike: 195/70 r13 auf 5 lochfelgen, barva: srebrn, Oprema: nalagalnik, Huge selection of immediately available 3-way tippers at bargain prices!!! Secure your price advantage now – come – buy – "take it with you" Technical data: Permissible total weight: 2,700 kg Payload: 2,030 kg Unladen weight: 670 kg Load compartment length: 269 cm Load compartment width: 155 cm Load compartment height: 33 cm Construction and equipment: WM Meyer - commercial frame Robust, one-piece steel floor without wood layer, with heavy-duty steel longitudinal and cross beams, tipper body tiltable on 3 sides, welded tipping bridge Rail for attaching loading ramps Hand-operated hydraulic pump on the drawbar, tiltable by hand 4-stage tipping cylinder with high ground clearance Frame with long V-drawbar 25 mm thick anodized aluminum drop sides with rear swing gate 4 sides foldable and removable V-drawbar with overrun brake and automatic reversing device Tandem axle, braked Galvanized, maintenance-free rubber suspension axles Reinforced heavy-duty jockey wheel with 60 mm tube 13-pin plug 6 lashing rings With reversing spotlight Rear wall with bottom-hinged gate Bjdjpgqadspfx Abmsdk Lighting bar and protected multi-chamber lights 2 wheel chocks Plus pre-delivery inspection & vehicle documents Images may show optional accessories!!! Optional accessories available at extra cost: - 100 km/h version including shock absorber set - Rear support set - Steel mesh extension approx. 59 cm - Aluminum side extension approx. 33 cm Other sizes and approx. 350 more models are available in our showroom Viewing at our exhibition area in Fulda-Bernhards, just 1 km from the A7, exactly between Kassel and Würzburg, right on the B27 --- Sundays is open house day! --- ---Drop by and take a look!--- Buying a trailer is a matter of trust – that's why you should buy from professionals! Strong brands – strong service – rely on our experience! Financing, trade-in, and delivery available We are happy to advise you personally – also by phone Despite the greatest care, typographical errors, mistakes and prior sale are excepted.

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, dvižna zadnja plošča, Inquiry number: 23185-O * Available immediately New Müller-Mitteltal KA-TA-R 11.9 tandem low-loader, three-way tipper trailer with ramps * Tyres: 385/55 R19.5 (4 pieces), BPW axles, parabolic springs, drum brakes * Gross weight: 11,900 kg, payload: 8,750 kg * Tyre pressure monitoring system with display option in the truck via EBS signal * EBS 24 volt * Side marker lights with integrated indicator function * LED lighting system for 12V and 24V * 2 LED reversing lights at the rear, suitable for 12V and 24V * Galvanized floor, 5m x 2.42m x 0.5m, laser-welded side walls, swinging, foldable, and removable, prepared for later retrofitting of side wall extensions * Stay wires for the tailgate * Lockable compartment under the tipping platform for loading ramp * Including aluminum ramps, 8 t load capacity, 3.57 m long, stored in the ramp shaft under the tipping body * Front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 recessed, foldable lashing eyes LC 3000daN in the tipper floor (centrally aligned) * Stepless height-adjustable towing bar, hot-dip galvanized, towing eye 40 mm * Net hooks * Bolted, galvanized rear stanchions * One plastic toolbox on the right side of the chassis frame * Access step in front of the front wall ---- * We are a Müller-Mitteltal distribution partner ---- * e.g. €5 net per day with 60 months term, no down payment, no final installment. An offer by our financing partner FM LeasingPartner * We will gladly send you a non-binding offer. ---- Our business hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of business hours, we are available by appointment. Wir sprechen deutsch, we speak English, mowimy po polsku, on parle français, Bdodpfxexmpd Aj Abmjk WhatsApp Leasing, financing, trade-in possible ----

Stanje: rabljeno, lastna masa: 5.550 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1999, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 780 mm, prostornina tovornega prostora: 12 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 3.200 mm, barva: rdeča, Oprema: ABS, Drum brake EBS Payload 18,450 kg Bodpet Tyf Dsfx Abmsdk Aluminium side walls, swinging and foldable All stanchions removable BPW axles Subject to errors and omissions

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: Bjdjtr St Uspfx Abmodk * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display capability in the truck via EBS signal, no installation required on truck side * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye * Mechanical support winch at the front * Rear: 2 mechanical foldable supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks on sides and rear, integrated in the central locking bearings, plus 2 units on the front wall * Main frame made of fine-grain steel * Steel pallet 2-way tipper body with fixed smooth sheet front wall, continuous foldable side walls (without center stanchions, with sideboard spring lifters and manual central locking for swinging function) * Removable screw-on rear stanchions * Steel rear wall mounted in front of the ramps * In each corner: 1 x 5 ton lashing point; in each side: 4 x 3 ton lashing rings integrated into the outer frame * 4 mm floor made of fine-grain steel * Two-part mechanical grating loading ramps with aluminum tapered end, 2,150 + 1,300 mm x 600 mm (retractable to 80 mm manually) * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Side boards and platform in pure white, RAL 9010 * Painting of side walls and tipper platform in any RAL color available at additional cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 07/2026

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, General Vehicle Data • Manufacturer: Sigg Fahrzeugbau GmbH, Lanzstraße 2, 88410 Bad Wurzach • Brand: Sigg • Type: A • Variant: 14V • Version: ABMTZ3535401810FHXV • Trade Name: 35BM36-T8 • Vehicle Class: O2 (trailer 0.75–3.5 t) • Body Type: DC14 (vehicle transporter) • Date of Manufacture: 11.04.2025 • Approval Number: e12007/460924*02 • Registration Certificate No.: HN339067 ⸻ Dimensions • Total Wheelbase: 3896 mm • Axle Spacing: • Axle 0–1: 3096 mm • Axle 1–2: 800 mm • Length: 5492 mm • Width: 2310 mm • Height: 2020 mm • Distance Coupling – Rear of Vehicle: 5457 mm • Loading Area Length: 3540 mm • Rear Overhang: 1561 mm ⸻ Weights • Unladen Weight: 761 kg • Axle 1: 365 kg • Axle 2: 365 kg • Actual Weight: 776 kg • Gross Vehicle Weight Rating (GVWR): 3500 kg • Permissible Axle Loads: • Axle 1: 1750 kg • Axle 2: 1750 kg • Permissible Axle Group: 3500 kg • Permissible Coupling Point Load: 150 kg ⸻ Performance • Maximum Speed: 140 km/h Bdjdew Sm Ecopfx Abmek ⸻ Axles and Wheels • Number of Axles: 2 • Total Wheels: 4 • Track Width (other axles): 2090 mm • Tyre/Wheel Combination: • 205 R 14 C 106/104N, 5.5Jx14, 5/67/112, ET30 - - - all information subject to change - - - images may vary - -

Stanje: rabljeno, največja dovoljena obremenitev: 13.280 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2015, naslednji pregled (TÜV): 12/2025, dolžina tovornega prostora: 4.900 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 10 m³, Oprema: ABS, * ABS * Podporno vitlo spredaj * BPW ECO-Plus osi * 5-komorni zadnji žarometi * Duomatik zračni priključek * Vlečna naprava po višini nastavljiva s premikalno ploščo * 16-stopenjski menjalnik Bsdpfx Asxgy Ixobmodk * Vzmetenje: zračno * Nosilnost: 13.280 kg * Stalna zavora: motorna zavora ----Nadgradnja: Meiller 3-stranska jeklena kiper nadgradnja, centralno zaklepanje.----Čudovita prikolica v vrhunskem stanju. Prodaja samo pravnim osebam. PRI IZVOZU SE PLAČA SAMO NETO CENA!!!!! VSE INFORMACIJE BREZ GARANCIJE ZA OPREMO + DODATNO OPREMO. Osnova vseh kupoprodajnih pogodb, računov, predračunov, naročil, prodajnih pogovorov so naši splošni pogoji poslovanja (glejte tudi odtis).

Stanje: novo, lastna masa: 750 kg, največja dovoljena obremenitev: 1.950 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.190 mm, širina tovornega prostora: 1.860 mm, višina nakladalnega prostora: 330 mm, barva: srebrn, Huge selection of immediately available 3-way tippers incl. electric and hand hydraulic pump (battery)!!! Secure your price advantage now – come, buy, "take away" Technical data: - Gross vehicle weight: 2,700 kg - Payload: 1,950 kg - Unladen weight: 750 kg - Cargo bed length: 319 cm - Cargo bed width: 186 cm - Cargo bed height: 33 cm Construction and features: - Commercial-grade chassis – reinforced, one-piece steel floor (no wooden layers), heavy-duty longitudinal and cross members, 3-way tipping function, welded tipping bridge - Channel rail for attaching loading ramps - Electric hydraulic pump + manual pump and battery - Four-stage tipper cylinder with high ground clearance - Chassis with extended V-drawbar - 25 mm thick anodised aluminium drop sides with rear swinging tailgate - All four drop sides fold down and are removable - V-drawbar with overrun brake and automatic reverse function - Tandem axle with brakes - Galvanised, maintenance-free rubber suspension axles - Reinforced heavy-duty jockey wheel (60 mm tube) - 13-pin plug - 6 lashing rings Bdedpfxjpgwpbo Abmjk - With reversing light - Rear wall opens to the side - Protected multi-chamber tail light bar - 2 wheel chocks Plus freight & vehicle documents Images may show optional accessories. Optional accessories available at extra cost: - 100 km/h version including shock absorber set - Rear support stands - Aluminium loading ramps - Steel mesh side extensions approx. 59 cm - Aluminium drop side extension approx. 33 cm Further sizes and around 350 more models available in our showroom. Viewing at our exhibition area in Fulda – district Bernhards, only 1 km from the A7 motorway, perfectly located between Kassel and Würzburg, directly on the B27. --- Sunday is viewing day! --- --- Feel free to visit! --- Buying a trailer is a matter of trust – buy from the professionals! Strong brands – excellent service – trust our experience! Financing, trade-in and delivery available. We are happy to advise you personally – by phone or email. Despite the utmost care, typographical errors, mistakes, and interim sale cannot be ruled out.

Stanje: novo, največja dovoljena obremenitev: 14.300 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, Oprema: ABS, Müller? Mitteltal KA-TA-R 19 Tandem Tipping Trailer with Bordmatik Left Side Inquiry Number: 11573 * BRAND NEW VEHICLE now finally available for immediate delivery!!! * Delivery free to your premises upon request. * Financing available through our partners FM LeasingPartner or MMV Leasing with terms from 24 to 72 months, with or without down payment, with or without final residual value. * Example: 60 months with no down payment and no residual value – €769 / month * Request your individual quote from us! We are an official Müller Mitteltal dealer. Bdjdpfx Aowq Uihsbmok * ---- * Gross weight: 19t, Payload: 14.30t, RAL 9016 traffic white or custom paintwork upon request * Reinforced and certified body built to EN 12642 XL including load securing certificate * Body – Steel 4,995mm x 2,380mm x 900mm * Right side with spring-assisted steel tailgate (2 springs), rear wall steel * Left side with Müller Bordmatic hydraulic sideboard (Bordmatik) * Removable roll tarpaulin for tipper * 4 pairs of lashing rings, recessed and foldable in 5mm steel floor, LC 3000 daN * LED lighting system 12+24 Volt replacing standard lighting * 2 LED reversing lights * Side marker lights with indicator function * BPW Eco axles, air suspension, drum brakes * 385/65R 22.5 tyres, with TPMS, EBS 2S/2M * 4 semi-round mudguards * Chassis, drawbar and foldable rear underrun protection hot-dip galvanized * Front wall platform with galvanized access step * Drawbar with 50mm eye, adjustable by +77mm / +33mm * Front support leg with crank * Foldable underrun protection for paver feeding * Removable protective grille for tail lights * ---- * Our business hours * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside business hours, appointments available by arrangement * We speak German, English, Russian, Polish, French * Leasing, financing, trade-in possible

Stanje: rabljeno, največja dovoljena obremenitev: 14.950 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2018, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 4.880 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.000 mm, prostornina tovornega prostora: 12 m³, skupna širina: 2.550 mm, skupna višina: 2.600 mm, Leto izdelave: 2018, Oprema: ABS, Schwarzmüller Tandem Three-Way Tipper VIN: JZ411728 Chassis / Attachments: * Air suspension * Lift axle * 2 x SAF axles with disc brakes * Tyres: 385/65 R 22.5 * Remaining tyre tread: approx. 40% front, 60/30% rear * Alcoa Dura Bright aluminium rims * Fixed underrun protection * Cranked drawbar with access step Body: Bdedpsxcrbcjfx Abmjk * 3-way tandem tipper * 980 mm aluminium side boards * Front wall made of steel plate * HARDOX floor * Tailgate with automatic pneumatic lock * Side walls with pendulum locking * Access platform with steps * 5 lashing rings per side * Roll tarp * Approx. 12 m³ * Pallet-wide Weights: * Gross weight: 19,000 kg * Payload: 14,950 kg * Unladen weight: 4,050 kg Miscellaneous: * German registration * Main/technical inspection: SP 02 / * 1 previous owner New roadworthiness inspections / safety checks or weight reductions/increases available on request. We are happy to assist you with the provision of export/temporary license plates, and can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing or typographical errors, subject to change, prior sale and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-run company based in Kehl am Rhein. Thanks to our many years of experience in the processing and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sales of new and used commercial vehicles. On 11,000 m², you will find a variety of vehicles. Our company philosophy is characterised by fairness and reliability. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them during the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to assist you in organising special transports. Temporary / export license plates We are happy to help you obtain export or short-term license plates.

Stanje: novo, največja dovoljena obremenitev: 13.350 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 11 m³, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release unit for spring-actuated cylinders * Drum brakes * Tire pressure monitoring system with display capability in truck dashboard via EBS signal – without installation on truck * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at front * Foldable, galvanized steel underride guard for paver feeding * Enclosed plastic single fenders * Standing platform on front wall Bdjdpexl Nkgsfx Abmek * Manual roll tarp * 15-pin power connector * LED tail lights with galvanized protective hood * Chassis made of fine-grained steel * Steel three-way tipper body (side walls with MM-profile – continuous without center stanchion – swinging via manual central locking and foldable with drop-side spring lifters) * Roll tarp similar to RAL 7038 agate grey, with tarpaulin tensioning using ratchet straps at the sides and tensioning rubbers at front and rear * Front wall platform made from grating with access step on drawbar and grab handle on front wall * Rear wall – made of HBW 400 steel – swinging via automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * Four recessed and foldable 3 t lashing rings per side – embedded in steel floor * Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate up to 19 t * Tipping platform and side walls in RAL 9010 pure white * Painting of drop sides in RAL 9010 pure white * Painting of side walls in a RAL color shade available at extra charge * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 11/2026 * Sample images

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tip angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipper bed, hot-dip galvanized - Tipper bed made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear tailgate with pendulum function - 6 lashing rings mounted on the bed floor, each with a lashing force of 800 kg, Dekra-certified - Support wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Black side panels - Parabolic suspension Price includes registration certificate (part II) and COC documentation We have a large range of trailers by the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Bodpfovtf Nfex Abmsdk On request, we provide a free temporary registration plate for carriage. We service and repair trailers of all manufacturers. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Reversing automatic, rubber suspension axle, independent suspension, tiltable platform, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper bed made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium removable side panels, pendulum-type rear tailgate, 6 lashing rings (800 kg each, Dekra-certified), preparation for aluminium ramps, black side panels, parabolic suspension.

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading Platform Hydraulically Tippable with Hand Pump and Electric Pump Tip Angle: Rear 42°, Side 50° - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made from a single piece of steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - 350 mm high side walls made of aluminium, completely removable - Rear flap can be used as a swing tailgate - 6 lashing rings mounted on the bridge floor, each with an 800 kg tie-down capacity, DEKRA-certified - Jockey wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Silver side panels - Parabolic suspension Price includes vehicle registration certificate (Part II and COC documents) Bedjwlabxopfx Abmjdk We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Subject to technical changes, price adjustments, and errors. No liability for mistakes or printing errors. Features: Automatic reversing system, rubber suspension axle, independent wheel suspension, tilting loading area, jockey wheel, marker lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single piece of steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminium side walls, completely removable, rear flap can be used as a swing tailgate, 6 lashing rings on the bridge floor (800 kg capacity per ring, DEKRA-certified), plank compartment prepared for easy retrofit of aluminium ramps, silver side panels, parabolic suspension.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyre Size: 13 inch Loading Height: 740 mm Loading platform can be hydraulically tipped with hand pump and electric pump Tipping angle: rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge, fully hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear flap is swing- and drop-type - 6 lashing rings mounted on the platform floor, tensile force 800 kg per ring, Dekra approved Bsdpjvtf I Uefx Abmedk - Jockey wheel - Shaft for installing aluminum ramps, pre-equipped for easy retrofitting - Black side walls Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. A free transfer license plate is available upon request. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices and availability subject to change. No liability for errors or misprints. Features: automatic reverse, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side walls, fully removable, swing-type rear flap, 6 lashing rings on the platform floor (800 kg tensile force each, Dekra approved), shaft pre-installed for retrofitting aluminum ramps, black side walls.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized - Tipping platform made of steel, pressed from a single piece - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear tailgate, swinging - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Bedsflw Sbepfx Abmsdk Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3500 kg Payload: 2512 kg Unladen Weight: 988 kg Body Dimensions: 3140 x 1750 x 350 mm Tyres: 195 50 R13C Loading Height: 740 mm Load Platform hydraulically tiltable via hand pump and electric pump Tipping Angle: rear 42°, lateral 50° With 600 mm high steel side extension panels, pendulum-mounted on all four sides - V-drawbar, hot-dip galvanized immersion - Chassis and tipper frame hot-dip galvanized immersion - Tipper body made from steel, single-piece construction - 4-stage hard-chromed tipping cylinder - Hand pump, electric pump from 3000 kg GVW up, combined with hand pump - 13-pin connector and reversing lights Bdodpfx Asfbiavjbmok - Removable aluminium side walls, 350 mm high, completely detachable - Rear tailgate pendulum-mounted - 6 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra certified - Support wheel - Plank compartment pre-installed for easy retrofitting with aluminium planks Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers of all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability for mistakes or typographical errors. Reversing automatic, rubber-sprung axle, independent suspension, tiltable load platform, support wheel, clearance lights, chassis and tipper frame hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipper body single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg GVW up electric pump with hand pump, 13-pin plug and reversing lights, removable aluminium sidewalls 350 mm high, rear tailgate pendulum-mounted, 6 lashing rings mounted on the platform floor, tensile strength 800 kg per ring, Dekra certified, plank compartment as preparation for easy retrofitting with aluminium planks.

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 3.500 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,8 m³, barva: drugo, gradbena višina: 1.020 mm, delovna širina: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-Way Tipper HM-2 Permissible total weight: 3,500 kg Payload: 2,600 kg Tare weight: 900 kg Body dimensions: 3,350 x 1,800 x 300 mm Tyres: 195/50 R13C Loading height: 690 mm Bdedpfetmfh Aox Abmek With electro-hydraulics and manual emergency pump Incl. ramp package: 2 integrated aluminium loading ramps, 2 crank supports 3-way tipper features: - Fully welded and hot-dip galvanised chassis - Low profile chassis with 195/50 R13 tyres - Robust hydraulic cylinder with electrically operated pump - Heavy-duty foldable jockey wheel - Galvanised steel sheet on multiplex floor panel - TÜV-approved load securing system - Specially designed sideboard hinges for easy installation of load nets - 4 removable corner stanchions - Aluminium side walls, 30 cm high, with robust integrated locks Price includes vehicle documents (registration certificate part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer license plates. We service trailers of all makes. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for misprints or errors. Equipment overview: Hydraulic cylinder with electrically operated pump, reversing automatic system, rubber suspension axle, independent wheel suspension, loading ramp, tiltable loading platform, heavy-duty foldable jockey wheel, clearance lights, galvanised steel sheet on multiplex floor panel, overrun brake, incl. warranty, fully welded and hot-dip galvanised chassis, low profile chassis with 195/50 R13 tyres, TÜV-approved load securing system, specially designed sideboard hinges for easy installation of load nets, 4 removable corner stanchions, aluminium side walls, 30 cm high, with robust integrated locks.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf mesh extension/steel mesh extension 600 mm high, swinging on all 4 sides - V-drawbar hot-dip galvanised - Chassis and tipping platform hot-dip galvanised by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder Bodpsrazlkjfx Abmsdk - Hand pump; electric pump with hand pump from 3,000 kg gross weight - 13-pin connector and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear gate, pendulum mounted - 6 lashing rings fitted on platform floor, each ring tested by Dekra for a load capacity of 800 kg - Jockey wheel - Channel for ramps, pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration documents (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a complimentary transit/temporary licence plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes and errors excepted. No liability assumed for errors or misprints. Automatic reversing mechanism, rubber spring axle, independent wheel suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipping platform hot-dip galvanised by immersion, braked, includes warranty, V-drawbar hot-dip galvanised by immersion, one-piece steel construction tipping platform, 4-stage hard-chromed tipping cylinder, hand pump, electric pump with hand pump from 3,000 kg gross weight, 13-pin connector and reversing light, aluminium side panels 350 mm high, fully removable, rear gate pendulum mounted, 6 lashing rings on the platform floor (Dekra certified, 800 kg per ring), ramp channel pre-installed for easy retrofitting with aluminium ramps.

Stanje: novo, lastna masa: 700 kg, največja dovoljena obremenitev: 2.200 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,7 m³, barva: zelen, gradbena višina: 2.570 mm, delovna širina: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-way Tipper HM-2 Gross Vehicle Weight: 3,000 kg Payload: 2,200 kg Unladen Weight: 800 kg Body Dimensions: 3,050 x 1,800 x 300 mm Fitted with green tarpaulin (RAL 6005) and 180 cm bow frame, internal height measured, with self-rolling rear flap Tyres: 185 R14C Bsdpfjtmfh Rox Abmodk Loading Height: 750 mm Equipped with electrohydraulic tipping Three-way tipper features: - Fully welded and hot-dip galvanized chassis - Robust hydraulic cylinder with electric pump - Galvanized steel sheet on multipurpose plywood floor - TÜV-certified load securing system - New tailgate hinges, including an easy mounting system, e.g. for load nets - 4 removable corner stanchions - Aluminium walls, 30 cm high, with sturdy integrated catches - Heavy-duty foldable jockey wheel - Only BPW genuine parts used - 13-pin plug Price includes vehicle registration document (Zulassungsbescheinigung Part II and COC papers). We stock a large selection of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices, and errors subject to change. No liability for omissions or typographical errors. Additional features: Hydraulic cylinder with hand pump, reverse automatic, rubber suspension axle, independent suspension, tiltable loading area, high tarpaulin, heavy-duty foldable jockey wheel, marker lights, galvanized steel sheet on multipurpose plywood base, overrun brake, includes warranty, fully welded and hot-dip galvanized chassis, TÜV-certified load securing system, new tailgate hinges with easy mounting for accessories including load nets, 4 removable corner stanchions, aluminium sides 30 cm high with robust recessed locks, only BPW genuine components, 13-pin plug.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 2700.27 Permissible total weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Bed dimensions: 2670 x 1500 x 350 mm Tyres: 13-inch Loading height: 725 mm Load platform hydraulically tipable via manual pump Tipping angle: rear 45°, sides 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chrome tipping cylinder - Electric pump with emergency hand pump - 13-pin connector and reversing lights - Side panels made of powder-coated, galvanized steel, fully removable - Rear tailgate can be swung Bdsdpfx Aeri Tb Asbmjk - 6 lashing rings mounted on the bed, each with 800 kg load capacity, Dekra certified - Jockey wheel - Lashing trough preinstalled for optional aluminum floor inserts – easy to retrofit Price includes vehicle registration documents (registration certificate Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. You can request a free temporary number plate for transport. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. We accept no responsibility for mistakes or typographical errors. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, galvanized steel panels, braked, includes warranty, V-drawbar hot-dip galvanized, chassis and tipper platform hot-dip galvanized, single piece steel tipper platform, 4-stage hard-chrome tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reversing lights, powder-coated fully removable side panels, swing rear tailgate, 6 lashing rings mounted in bed rated to 800 kg each (Dekra certified), preinstalled trough for easy retrofitting of aluminum floor inserts.

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 2.375 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 2,4 m³, barva: drugo, gradbena višina: 1.620 mm, delovna širina: 1.870 mm, Manufacturer: Hapert Model: Cobalt+ 3-way tipper Gross Vehicle Weight: 3,500 kg Payload: 2,375 kg Unladen Weight: 1,125 kg Platform Dimensions: 3,350 x 1,800 x 400 mm Tyres: 185/70 R13 C Loading Height: 725 mm 3-way tipper trailer: - Chassis fully welded and hot-dip galvanized - Robust 5-stage hydraulic cylinder with electrically operated pump and emergency hand pump installed - One-piece, 3 mm thick, hot-dip galvanized steel sheet platform - TÜV-approved load securing system - 4 removable corner stanchions - Steel side walls, 35 cm high, KTL and powder coated in anthracite with heavy-duty recessed locks - Reinforced trailer frame - Parabolic spring suspension instead of rubber axle and shock absorbers mounted, loading height 72.5 cm - 100 km/h approval - Tyres 185/70 R13 C incl. black rims - Reinforced jockey wheel and special jockey wheel bracket - Reinforced 2.5 m aluminium loading ramps integrated under the floor, incl. U-profile - Stable fold-out crank supports - Lighting protector installed - Reinforced Cobalt+ mesh sides - Battery charger supplied loose Bedpfx Ajv S D Tgjbmsdk Price includes vehicle registration documents (vehicle title [Zulassungsbescheinigung Part II] and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free transfer plate from us. We repair trailers from all manufacturers. Additional accessories available upon request. Technical changes, price adjustments, and errors excepted. No liability for mistakes or typographical errors. Features overview: Reinforced 2.5 m aluminium loading ramps integrated under the floor, robust 5-stage hydraulic cylinder with electric and emergency hand pump, auto-reverse, rubber torsion axle, independent suspension, tiltable platform, reinforced jockey wheel and special bracket, marker lights, 3 mm thick hot-dip galvanized steel platform, overrun brake, loose battery charger supplied, includes warranty, fully welded and hot-dip galvanized chassis, one-piece platform, TÜV-approved load securing system, 4 removable corner stanchions, 35 cm high steel side walls, KTL and powder coated in anthracite with heavy-duty recessed locks, reinforced trailer frame, parabolic spring and shock absorbers installed, loading height 72.5 cm, tyres 185/70 R13 C incl. black rims, includes U-profile, stable fold-out crank supports, lighting protector, reinforced Cobalt+ mesh sides.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). Bsdpfxjktm Suo Abmedk We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 800 kg, največja dovoljena obremenitev: 2.200 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,7 m³, barva: drugo, gradbena višina: 1.070 mm, delovna širina: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-Way Tipper HM-2 Permissible gross weight: 3,000 kg Payload: 2,200 kg Unladen weight: 800 kg Bed dimensions: 3050 x 1800 x 300 mm Tyres: 185 R14C Loading height: 750 mm with electro-hydraulic system 3-way tipper - Fully welded and hot-dip galvanized chassis - Heavy-duty hydraulic cylinder with electric pump - Galvanized steel sheet on multiplex floor panel - TÜV-certified cargo securing system - New side panel hinges incl. very easy attachment option for e.g. a load net - 4 removable corner stanchions - Aluminum side walls, 30 cm high, with robust recessed locks Bdjdpfx Astmfhxobmok - Heavy-duty folding jockey wheel - Only genuine BPW parts used - 13-pin connector Price includes the registration certificate (Part II of the registration document and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we offer a free transit registration plate. We service trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors or printing mistakes. Features: hydraulic cylinder with hand pump, reverse automatic mechanism, rubber suspension axle, independent wheel suspension, tiltable loading platform, heavy-duty folding jockey wheel, marker lights, galvanized steel sheet on multiplex floor, overrun brake, including warranty, fully welded and hot-dip galvanized chassis, TÜV-certified cargo securing system, new side panel hinges incl. very easy attachment option for e.g. a load net, 4 removable corner stanchions, aluminum side walls, 30 cm high, with robust recessed locks, only genuine BPW parts used, 13-pin connector.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: HTK Alu 3500.41 3-Way Tipper Gross Vehicle Weight: 3,500 kg Payload: 2,315 kg Unladen Weight: 1,185 kg Bed Dimensions: 4,100 x 2,100 x 350 mm Tyres: 13-inch Loading Height: 760 mm Load bed hydraulically tiltable with hand pump and electric pump Tipping angle: rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized via immersion bath Bdsdperi Tawofx Abmjk - One-piece steel tipper platform - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with additional electric pump - 13-pin connector and reversing lights - 350 mm high aluminium drop sides, fully removable - Rear flap can swing - 8 lashing rings mounted on the platform floor, each with a pulling force of 800 kg, Dekra-tested - Jockey wheel - Plank box pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration document (registration certificate part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer plates. We repair trailers of all manufacturers. Additional accessories available on request. Technical and price changes as well as errors excepted. No liability for errors or misprints. Features: auto-reverse braking system, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar fully hot-dip galvanized, one-piece steel tipper platform, 4-stage hard-chromed tipping cylinder, hand pump, additional electric pump from 3,000 kg GVW, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, rear swing flap, 8 lashing rings mounted on the platform floor, pulling force 800 kg per ring, Dekra-certified, plank box pre-installed for easy retrofitting of aluminium ramps.